diff options
Diffstat (limited to 'reproduce/software/make/basic.mk')
| -rw-r--r-- | reproduce/software/make/basic.mk | 214 |
1 files changed, 128 insertions, 86 deletions
diff --git a/reproduce/software/make/basic.mk b/reproduce/software/make/basic.mk index 4e85807..92fa8f0 100644 --- a/reproduce/software/make/basic.mk +++ b/reproduce/software/make/basic.mk @@ -105,12 +105,13 @@ endif export CPPFLAGS := -I$(idir)/include $(CPPFLAGS) $(noccwarnings) # This is the "basic" tools where we are relying on the host operating -# system, but are slowly populating our basic software envirnoment. To run -# (system or template) programs, 'LD_LIBRARY_PATH' is necessary, so here, -# we'll first tell the programs to look into any possible pre-defined -# 'LD_LIBRARY_PATH', then we'll add our own newly installed libraries. We -# will also make sure that there is no "current directory" in it (by -# removing a starting or trailing ':' and any occurance of '::'. +# system, but are slowly populating our basic software envirnoment. So +# here, we are also appending the host's 'LD_LIBRARY_PATH' to Maneage's +# installed library path. It is just important to keep Maneage's library +# directories first so when something has been built, the newly built +# software use (link-with) Maneage's libraries, not the host's. We will +# also make sure that there is no "current directory" in it (by removing a +# starting or trailing ':' and any occurance of '::'). # # But first: in case LD_LIBRARY_PATH is empty, give it the default value of # $(sys_library_sh_path) (which was the location of the libraries needed by @@ -120,7 +121,7 @@ export CPPFLAGS := -I$(idir)/include $(CPPFLAGS) $(noccwarnings) ifeq ($(strip $(LD_LIBRARY_PATH)),) export LD_LIBRARY_PATH=$(sys_library_sh_path) endif -export LD_LIBRARY_PATH := $(shell echo $(LD_LIBRARY_PATH):$(ildir) \ +export LD_LIBRARY_PATH := $(shell echo $(ildir):$(LD_LIBRARY_PATH) \ | sed -e's/::/:/g' -e's/^://' -e's/:$$//') # RPATH is automatically written in macOS, so 'DYLD_LIBRARY_PATH' is @@ -253,6 +254,23 @@ $(ibidir)/low-level-links: $(ibidir)/grep-$(grep-version) \ # systems) $(call makelink,ldd) +# zic: On some systems like Debian GNU/Linux, 'zic' may be in +# '/usr/sbin' and is available to users. But it is not normally in +# the 'PATH' of a non-root user. This is because the executables +# there are normally system-level commands, and most are executable +# only by the root user. + $(call makelink,zic) + if [ "x$$(command -v zic)" = x ]; then + zicfullpath=$$(PATH=$${PATH}:/usr/sbin command -v zic) + if [ "x$${zicfullpath}" = x ]; then + printf "Warning: 'zic' not found. You may need it for" + printf " higher-level packages such as 'tzdb'. Install" + printf " 'zic' if needed.\n" + else + ln -sf $$(realpath $${zicfullpath}) $(ibdir)/zic + fi + fi + # We want this to be empty (so it doesn't interefere with the other # files in 'ibidir'. touch $@ @@ -376,8 +394,8 @@ $(ibidir)/tar-$(tar-version): \ # Patchelf is necessary for some software on GNU/Linux systems, its job is # to manually insert RPATH into the dynamically-linked executable. Since # all the other software depend on Pathelf, to avoid manually repeating as -# a prerequisite (and forgetting in others causing bugs), we'll put it as a -# dependancy of 'tar'. +# a prerequisite (and forgetting in others causing bugs), it is installed +# in this phase (right after 'tar'). $(ibidir)/patchelf-$(patchelf-version): $(ibidir)/tar-$(tar-version) tarball=patchelf-$(patchelf-version).tar.lz $(call import-source, $(patchelf-url), $(patchelf-checksum)) @@ -388,7 +406,47 @@ $(ibidir)/patchelf-$(patchelf-version): $(ibidir)/tar-$(tar-version) echo "PatchELF $(patchelf-version)" > $@ fi +$(ibidir)/pkg-config-$(pkgconfig-version): $(ibidir)/tar-$(tar-version) +# Download the tarball. + tarball=pkg-config-$(pkgconfig-version).tar.lz + $(call import-source, $(pkgconfig-url), $(pkgconfig-checksum)) + +# An existing 'libiconv' can cause a conflict with 'pkg-config' (this +# is why 'libiconv' depends on 'pkg-config'). On a clean build, +# 'pkg-config' is built first. But when we don't have a clean build +# (and 'libiconv' exists) there will be a problem. So before +# re-building 'pkg-config', we'll remove any installation of +# 'libiconv'. + rm -f $(ildir)/libiconv* $(idir)/include/iconv.h + +# Some Mac OS systems may have a version of the GNU C Compiler (GCC) +# installed that doesn't support some necessary features of building +# Glib (as part of pkg-config), so we will disable pkg-config's +# internal Glib for Mac systems, and to be further safe, we'll make +# sure it will use LLVM's Clang. +# +# On macOS systems, to ensure that Clang can build pkg-config, take +# the following steps: +# 1. Install the latest Glib via Homebrew: +# brew install glib +# 2. Set these environment variables before configuring Maneage: +# export GLIB_CFLAGS=$(pkg-config --cflags glib-2.0) +# export GLIB_LIBS=$(pkg-config --libs glib-2.0) +# 3. Ensure PKG_CONFIG_PATH includes Homebrew's pkgconfig: +# export PKG_CONFIG_PATH=/opt/homebrew/lib/pkgconfig:$PKG_CONFIG_PATH + if [ x$(on_mac_os) = xyes ]; then + extra_pkgconf="" + export compiler="CC=clang" + else + export compiler="" + extra_pkgconf="--with-internal-glib" + fi + export CFLAGS="-std=$(std_c_old) $$CFLAGS" + $(call gbuild, pkg-config-$(pkgconfig-version), static, \ + $$compiler $$extra_pkgconf \ + --with-pc-path=$(ildir)/pkgconfig, V=1) + echo "pkg-config $(pkgconfig-version)" > $@ @@ -408,7 +466,10 @@ $(ibidir)/patchelf-$(patchelf-version): $(ibidir)/tar-$(tar-version) # function (for tilde expansion). The first can be disabled with # '--disable-load', but unfortunately I don't know any way to fix the # second. So, we'll have to build it dynamically for now. -$(ibidir)/ncurses-$(ncurses-version): $(ibidir)/patchelf-$(patchelf-version) +$(ibidir)/ncurses-$(ncurses-version): $(ibidir)/patchelf-$(patchelf-version) \ + $(ibidir)/pkg-config-$(pkgconfig-version) + +# Prepare the input. tarball=ncurses-$(ncurses-version).tar.lz $(call import-source, $(ncurses-url), $(ncurses-checksum)) @@ -424,12 +485,18 @@ $(ibidir)/ncurses-$(ncurses-version): $(ibidir)/patchelf-$(patchelf-version) rm -f $(ibdir)/bash* $(ibdir)/awk* $(ibdir)/gawk* # Standard build process. - export CFLAGS="-std=gnu17 $$CFLAGS" + export CFLAGS="-std=$(std_c_old) $$CFLAGS" $(call gbuild, ncurses-$(ncurses-version), static, \ - --with-shared --enable-rpath --without-normal \ - --without-debug --with-cxx-binding \ - --with-cxx-shared --enable-widec --enable-pc-files \ - --with-pkg-config=$(ildir)/pkgconfig, -j$(numthreads)) + --with-shared \ + --enable-rpath \ + --enable-widec \ + --without-debug \ + --without-normal \ + --enable-pc-files \ + --with-cxx-shared \ + --with-cxx-binding \ + --with-pkg-config=$(ildir)/pkgconfig, \ + -j$(numthreads)) # Unfortunately there are many problems with 'ncurses' using "normal" # (or 8-bit) characters. The standard way that will work is to build @@ -567,7 +634,7 @@ $(ibidir)/bash-$(bash-version): \ export CFLAGS="$$CFLAGS \ -DDEFAULT_PATH_VALUE='\"$(ibdir)\"' \ -DSTANDARD_UTILS_PATH='\"$(ibdir)\"' \ - -DSYS_BASHRC='\"$(BASH_ENV)\"' " + -DSYS_BASHRC='\"$(BASH_ENV)\"'" $(call gbuild, bash-$(bash-version),, $$stopt \ --with-installed-readline=$(ildir) \ --with-curses=yes, \ @@ -584,9 +651,6 @@ $(ibidir)/bash-$(bash-version): \ # shell. By convention, 'sh' is just a symbolic link to the preferred # shell executable. So we'll define '$(ibdir)/sh' as a symbolic link # to the Bash that we just built and installed. -# -# Just to be sure that the installation step above went well, before -# making the link, we'll see if the file actually exists there. ln -fs $(ibdir)/bash $(ibdir)/sh echo "GNU Bash $(bash-version)" > $@ @@ -599,6 +663,7 @@ $(ibidir)/bash-$(bash-version): \ + # Level 4: Most other programs # ---------------------------- @@ -612,15 +677,21 @@ perl-conflddlflags = else perl-conflddlflags = -Dlddlflags="-shared $$LDFLAGS" endif -$(ibidir)/perl-$(perl-version): $(ibidir)/patchelf-$(patchelf-version) +$(ibidir)/perl-$(perl-version): $(ibidir)/tar-$(tar-version) + +# Import tarball. tarball=perl-$(perl-version).tar.lz $(call import-source, $(perl-url), $(perl-checksum)) + +# Extract the version strings. major_version=$$(echo $(perl-version) \ | sed -e's/\./ /g' \ | awk '{printf("%d", $$1)}') base_version=$$(echo $(perl-version) \ | sed -e's/\./ /g' \ | awk '{printf("%d.%d", $$1, $$2)}') + +# Unpack, build and install. cd $(ddir) rm -rf perl-$(perl-version) tar -xf $(tdir)/$$tarball --no-same-owner --no-same-permissions @@ -631,15 +702,15 @@ $(ibidir)/perl-$(perl-version): $(ibidir)/patchelf-$(patchelf-version) -Duseshrplib \ -Dprefix=$(idir) \ -Dvendorprefix=$(idir) \ - -Dprivlib=$(idir)/share/perl$$major_version/core_perl \ - -Darchlib=$(idir)/lib/perl$$major_version/$$base_version/core_perl \ - -Dsitelib=$(idir)/share/perl$$major_version/site_perl \ - -Dsitearch=$(idir)/lib/perl$$major_version/$$base_version/site_perl \ - -Dvendorlib=$(idir)/share/perl$$major_version/vendor_perl \ - -Dvendorarch=$(idir)/lib/perl$$major_version/$$base_version/vendor_perl \ - -Dscriptdir=$(idir)/bin/core_perl \ - -Dsitescript=$(idir)/bin/site_perl \ - -Dvendorscript=$(idir)/bin/vendor_perl \ + -Dprivlib=$(idir)/share/perl$$major_version/perl-core \ + -Darchlib=$(idir)/lib/perl$$major_version/$$base_version/perl-core \ + -Dsitelib=$(idir)/share/perl$$major_version/perl-site \ + -Dsitearch=$(idir)/lib/perl$$major_version/$$base_version/perl-site \ + -Dvendorlib=$(idir)/share/perl$$major_version/perl-vendor \ + -Dvendorarch=$(idir)/lib/perl$$major_version/$$base_version/perl-vendor \ + -Dscriptdir=$(idir)/bin/perl-core \ + -Dsitescript=$(idir)/bin/perl-site \ + -Dvendorscript=$(idir)/bin/perl-vendor \ -Dinc_version_list=none \ -Dman1ext=1perl \ -Dman3ext=3perl \ @@ -650,7 +721,14 @@ $(ibidir)/perl-$(perl-version): $(ibidir)/patchelf-$(patchelf-version) make install cd .. rm -rf perl-$(perl-version) - cd $$topdir + +# Symbolic links to necessary Perl programs (that Perl installs in +# the 'perl-core' directory. + ln -sf $(ibdir)/perl-core/xsubpp $(ibdir)/xsubpp + ln -sf $(ibdir)/perl-core/pod2man $(ibdir)/pod2man + ln -sf $(ibdir)/perl-core/pod2text $(ibdir)/pod2text + +# Final target. echo "Perl $(perl-version)" > $@ @@ -719,29 +797,6 @@ $(ibidir)/coreutils-$(coreutils-version): \ rm -rf coreutils-$(coreutils-version) echo "GNU Coreutils $(coreutils-version)" > $@ -# Podlators -# -# POD is short for "Plain Old Documentation", that is the format used in -# Perl's documentation. Podlators provies two executables pod2man and -# pod2text convert this into the roff format (used in man pages) or pod2 It -# is used by some software like OpenSSL to create their man pages. -$(ibidir)/podlators-$(podlators-version): $(ibidir)/perl-$(perl-version) - tarball=podlators-$(podlators-version).tar.lz - $(call import-source, $(podlators-url), $(podlators-checksum)) - cd $(ddir) - rm -rf podlators-$(podlators-version) - tar -xf $(tdir)/$$tarball --no-same-owner --no-same-permissions - cd podlators-$(podlators-version) - $(shsrcdir)/prep-source.sh $(ibdir) - perl Makefile.PL - make - make install - ln -sf $(ibdir)/site_perl/pod2man $(ibdir)/pod2man - ln -sf $(ibdir)/site_perl/pod2text $(ibdir)/pod2text - cd .. - rm -rf podlators-$(podlators-version) - echo "podlators $(podlators-version)" > $@ - # OpenSSL # # Until we find a nice and generic way to create an updated CA file in the @@ -749,8 +804,9 @@ $(ibidir)/podlators-$(podlators-version): $(ibidir)/perl-$(perl-version) # along with the other tarballs. $(idir)/etc:; mkdir $@ $(idir)/etc/ssl: | $(idir)/etc; mkdir $@ -$(ibidir)/openssl-$(openssl-version): $(ibidir)/podlators-$(podlators-version) \ - | $(idir)/etc/ssl +$(ibidir)/openssl-$(openssl-version): $(ibidir)/perl-$(perl-version) \ + $(ibidir)/patchelf-$(patchelf-version) \ + | $(idir)/etc/ssl # First download the certificates and copy them into the # installation directory. @@ -906,7 +962,7 @@ $(ibidir)/diffutils-$(diffutils-version): \ echo "GNU Diffutils $(diffutils-version)" > $@ $(ibidir)/file-$(file-version): $(ibidir)/coreutils-$(coreutils-version) - export CFLAGS="-std=c99 $$CFLAGS" + export CFLAGS="-std=$(std_c_old) $$CFLAGS" tarball=file-$(file-version).tar.lz $(call import-source, $(file-url), $(file-checksum)) $(call gbuild, file-$(file-version), static, \ @@ -958,6 +1014,8 @@ $(ibidir)/help2man-$(help2man-version): \ $(call gbuild, help2man-$(help2man-version), static, ,V=1) echo "Help2man $(Help2man-version)" > $@ +# Even though libiconv does not use pkg-config, pkg-config conflicts with +# it, see the comments in pkg-config for more. $(ibidir)/libiconv-$(libiconv-version): \ $(ibidir)/pkg-config-$(pkgconfig-version) tarball=libiconv-$(libiconv-version).tar.lz @@ -973,12 +1031,14 @@ $(ibidir)/libunistring-$(libunistring-version): \ -j$(numthreads)) echo "GNU libunistring $(libunistring-version)" > $@ -$(ibidir)/libxml2-$(libxml2-version): $(ibidir)/patchelf-$(patchelf-version) +$(ibidir)/libxml2-$(libxml2-version): $(ibidir)/tar-$(tar-version) # The libxml2 tarball also contains Python bindings which are built # and installed to a system directory by default. If you don't need # the Python bindings, the easiest solution is to compile without # Python support: './configure --without-python'. If you really need -# the Python bindings, use '--with-python-install-dir=DIR' instead. +# its Python bindings: +# 1. Add the Python dependency. +# 2. Add the '--with-python-install-dir=DIR' configure option. tarball=libxml2-$(libxml2-version).tar.lz $(call import-source, $(libxml2-url), $(libxml2-checksum)) $(call gbuild, libxml2-$(libxml2-version), static, \ @@ -1017,7 +1077,7 @@ $(ibidir)/gmp-$(gmp-version): \ $(ibidir)/coreutils-$(coreutils-version) tarball=gmp-$(gmp-version).tar.lz $(call import-source, $(gmp-url), $(gmp-checksum)) - export CFLAGS="-std=gnu17 $$CFLAGS" + export CFLAGS="-std=$(std_c_old) $$CFLAGS" $(call gbuild, gmp-$(gmp-version), static, \ --enable-cxx --enable-fat, \ -j$(numthreads)) @@ -1085,33 +1145,6 @@ $(ibidir)/mpfr-$(mpfr-version): $(ibidir)/gmp-$(gmp-version) $(call gbuild, mpfr-$(mpfr-version), static) echo "GNU Multiple Precision Floating-Point Reliably $(mpfr-version)" > $@ -$(ibidir)/pkg-config-$(pkgconfig-version): $(ibidir)/patchelf-$(patchelf-version) - -# Download the tarball. - tarball=pkg-config-$(pkgconfig-version).tar.lz - $(call import-source, $(pkgconfig-url), $(pkgconfig-checksum)) - -# An existing 'libiconv' can cause a conflict with 'pkg-config', this -# is why 'libiconv' depends on 'pkg-config'. On a clean build, -# 'pkg-config' is built first. But when we don't have a clean build -# (and 'libiconv' exists) there will be a problem. So before -# re-building 'pkg-config', we'll remove any installation of -# 'libiconv'. - rm -f $(ildir)/libiconv* $(idir)/include/iconv.h - -# Some Mac OS systems may have a version of the GNU C Compiler (GCC) -# installed that doesn't support some necessary features of building -# Glib (as part of pkg-config). So to be safe, for Mac systems, we'll -# make sure it will use LLVM's Clang. - if [ x$(on_mac_os) = xyes ]; then export compiler="CC=clang" - else export compiler="" - fi - export CFLAGS="-std=gnu17 $$CFLAGS" - $(call gbuild, pkg-config-$(pkgconfig-version), static, \ - $$compiler --with-internal-glib \ - --with-pc-path=$(ildir)/pkgconfig, V=1) - echo "pkg-config $(pkgconfig-version)" > $@ - $(ibidir)/sed-$(sed-version): $(ibidir)/coreutils-$(coreutils-version) tarball=sed-$(sed-version).tar.lz $(call import-source, $(sed-url), $(sed-checksum)) @@ -1219,6 +1252,7 @@ $(ibidir)/binutils-$(binutils-version): \ $(call makelink,ld) $(call makelink,nm) $(call makelink,ps) + $(call makelink,lipo) $(call makelink,strip) $(call makelink,ranlib) echo "" > $@ @@ -1442,6 +1476,14 @@ $(ibidir)/gcc-$(gcc-version): $(ibidir)/binutils-$(binutils-version) -e"s|FS_IOC_SETVERSION;|_IOW('v', 2, long);|" \ -i libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cpp +# Bug in GCC 15.2.0 using glibc 2.43 (see [1]) as fixed in [2]. +# [1] https://patchwork.ozlabs.org/project/gcc/patch/e1679277-d7c9-49aa-8365-a8dca082d9bd@web.de +# [2] https://github.com/johnny-mnemonic/toolchain-autobuilds/commit/9585fdfc + sed -e's|char \*q = strchr (p + 1,|const char \*q = strchr (p + 1,|' \ + libgomp/affinity-fmt.c > affinity-fmt-tmp.c + mv affinity-fmt-tmp.c libgomp/affinity-fmt.c + + # Set the build directory for the processing. mkdir build cd build |