diff options
Diffstat (limited to 'reproduce/src')
| -rw-r--r-- | reproduce/src/make/download.mk | 68 | ||||
| -rw-r--r-- | reproduce/src/make/initialize.mk | 114 | ||||
| -rw-r--r-- | reproduce/src/make/paper.mk | 34 |
3 files changed, 216 insertions, 0 deletions
diff --git a/reproduce/src/make/download.mk b/reproduce/src/make/download.mk new file mode 100644 index 0000000..244bd04 --- /dev/null +++ b/reproduce/src/make/download.mk @@ -0,0 +1,68 @@ +# Download all the necessary inputs if they are not already present. +# +# Since most systems only have one input/connection into the network, +# downloading is essentially a serial (not parallel) operation. so the +# recipes in this Makefile all use a single file lock to have one download +# script running at every instant. +# +# Original author: +# Your name <your@email.address> +# Contributing author(s): +# Copyright (C) YYYY, Your Name. +# +# This Makefile is free software: you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation, either version 3 of the License, or (at your +# option) any later version. +# +# This Makefile is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. See <http://www.gnu.org/licenses/>. + + + + + +# Identify the downloader tool +# ---------------------------- +# +# If cURL is already present, that will be used, otherwise, we'll use +# Wget. Since the options specifying the output filename are different +# between the two, we'll also specify the output option within the +# `downloader' variable. So it is important to first give the output +# filename after calling `downloader', then the web address. +downloader := $(shell if type curl > /dev/null; then downloader="curl -o"; \ + else downloader="wget -O"; \ + fi; echo "$$downloader"; ) + + + + + +# Download SURVEY data +# -------------------- +# +# Data from a survey (for example an imaging survey) usually have a special +# file-name format which should be set here in the `foreach' loop. Note +# that the `foreach' function needs the backslash (`\') at the end of the +# line when it is broken into multiple lines. +all-survey = $(foreach f, $(filters-survey), \ + $(SURVEY)/a-special-format-$(f).fits \ + $(SURVEY)/a-possibly-additional-$(f)-format.fits ) +$(SURVEY):; mkdir $@ +$(all-survey): $(SURVEY)/%: | $(SURVEY) $(lockdir) + flock $(lockdir)/download -c "$(downloader) $@ $(web-survey)/$*" + + + + + + +# Final TeX macro +# --------------- +# +# It is very important to mention the address where the data were +# downloaded in the final report. +$(mtexdir)/download.tex: $(pconfdir)/web.mk | $(mtexdir) + @echo "\\newcommand{\\websurvey}{$(web-survey)}" > $@ diff --git a/reproduce/src/make/initialize.mk b/reproduce/src/make/initialize.mk new file mode 100644 index 0000000..2da5e79 --- /dev/null +++ b/reproduce/src/make/initialize.mk @@ -0,0 +1,114 @@ +# Initialize the reproduction pipeline. +# +# Original author: +# Your name <your@email.address> +# Contributing author(s): +# Copyright (C) YYYY, Your Name. +# +# This Makefile is free software: you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation, either version 3 of the License, or (at your +# option) any later version. +# +# This Makefile is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# A copy of the GNU General Public License is available at +# <http://www.gnu.org/licenses/>. + + + + + +# High-level directory definitions +# -------------------------------- +# +# Basic directories that are used throughout the whole pipeline. +# +# Locks are used to make sure that an operation is done in series not in +# parallel (even if Make is run in parallel with the `-j' option). The most +# common case is downloads which are better done in series and not in +# parallel. Also, some programs may not be thread-safe, therefore it will +# be necessary to put a lock on them. This pipeline uses the `flock' +# program to achieve this. +texdir = $(BDIR)/tex +lockdir = $(BDIR)/locks +bdirsym = reproduce/build +mtexdir = $(texdir)/macros +pconfdir = reproduce/config/pipeline + + + + + +# Make the high-level level directories +# ------------------------------ +# +# These are just the top-level directories for all the separate steps. The +# directories (or possible sub-directories) for individual steps will be +# defined and added within their own Makefiles. +$(BDIR):; mkdir $@; +$(mtexdir): | $(texdir); mkdir $@ +$(texdir) $(lockdir): | $(BDIR); mkdir $@ + + + + + +# High-level Makefile management +# ------------------------------ +# +# About `.PHONY': these are targets that must be built even if a file with +# their name exists. Most don't correspond to a file, but those that do are +# included here ensure that the file is always built in every run: for +# example the pipeline versions may change within two separate runs, so we +# want it to be rebuilt every time. +.PHONY: all clean clean-mmap $(texdir)/versions.tex +clean-mmap:; rm -f reproduce/config/gnuastro/mmap* +clean: + rm -rf $(BDIR) $(bdirsym) *.pdf *.log *.out *.aux *.auxlock \ + reproduce/config/gnuastro/mmap* + + + + + +# Pipeline version +# ---------------- +# +# The pipeline's version is necessary for the analysis and must be +# calculated everytime the pipeline is run, so even though this file +# actually exists, it is also aded as a `.PHONY' target above. +$(mtexdir)/initialize.tex: | $(mtexdir) + + @v=$$(git describe --dirty --always); \ + echo "\newcommand{\pipelineversion}{$$v}" > $@ + + @v=$$(astnoisechisel --version | awk 'NR==1{print $$NF}'); \ + echo "\newcommand{\gnuastroversion}{$$v}" >> $@ + + echo "\newcommand{\bdir}{$(BDIR)}" >> $@ + + + + + +# Symbolic link to build directory +# -------------------------------- +# +# Besides $(BDIR), we are also making a symbolic link to it if $(bdirsym) +# is not empty. In case this symbolic link is not needed, simply remove its +# value from the definitions above. In that case, it will be read as a +# blank (non-existant). +# +# Note that $(BDIR) might not be an absolute path and this will complicate +# the symbolic link creation. To be generic, we'll first call `readlink' to +# make sure we have an absolute address, then we'll make a symbolic link to +# that. +ifneq ($(bdirsym),) +$(bdirsym): | $(BDIR) + absbdir=$$(readlink -f $(BDIR)); \ + ln -s $$absbdir $(bdirsym) +endif diff --git a/reproduce/src/make/paper.mk b/reproduce/src/make/paper.mk new file mode 100644 index 0000000..0725ec8 --- /dev/null +++ b/reproduce/src/make/paper.mk @@ -0,0 +1,34 @@ +# Build the final PDF paper/report. +# +# Original author: +# Your name <your@email.address> +# Contributing author(s): +# Copyright (C) YYYY, Your Name. +# +# This script is free software: you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation, either version 3 of the License, or (at your +# option) any later version. +# +# This script is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# A copy of the GNU General Public License is available at +# <http://www.gnu.org/licenses/>. + + + + + +# The final paper +# --------------- +# +# The commands to build the final report. We want the pipeline version to +# be checked everytime the final PDF is to be built. +paper.pdf: tex/pipeline.tex paper.tex + + # Make the report. + @pdflatex -shell-escape -halt-on-error paper.tex + @rm -f *.auxlock *.aux *.out *.log |