| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Until now, the 'RPATH' variable (specifying where to look for shared
libraries) wasn't being set in the 'libcrypto' library of OpenSSL (it was
only set for the 'libssl' library).
Also, Gettext used the host Emacs for some operations during installation
that could cause the following crash (because we are giving priority to
local libraries, which the host Emacs doesn't recognize):
emacs: /BDIR/libcrypto.so.1.1: version `OPENSSL_1_1_1b' not found
(required by /lib64/libk5crypto.so.3)
With this commit both these bugs have been fixed: 1) Patchelf is run on the
'libcrypto' library also and 2) we pass the '--without-emacs' configuration
option to the configure script of Gettext.
These bugs were found by Elham Saremi.
|
|
Until now the SWIG software would use the host operating system's packages
to find the TCL configuraiton (which we don't install yet in Maneage). In
particular, you can see the error during its configuration here:
....
checking for pkg-config... pkg-config
checking for Tcl configuration... found /usr/lib/tclConfig.sh
/usr/lib/tclConfig.sh: line 2: dpkg-architecture: command not found
/usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: com. not found
With this commit, TCL has been disabled when building SWIG with the
'--without-tcl' option. Later, when we add TCL in Maneage, we can remove
this option.
|
|
With a recent update of macOS systems (macOS Big Sur 11.2.3 and Xcode
12.4), there are many warnings when building C programs (for example the
simple program we compile to check the compiler, or some of the software
like `gzip'). It prints hundreds of warning lines for every source file
that are irrelevant for our builds, but really clutters the output.
With this commit, these warnings are disabled by adding
`-Wno-nullability-completeness' to the 'CPPFLAGS' environment
variable. This has also been added to the very first check of the C
compiler in the configure step.
|
|
Until now when making a link to the system's 'dl' and 'pthread' libraries
we were simply linking the installed location on the system (in
'/usr/lib'). However, in some systems, these may themselves be links to
other locations and this could cause linking problems.
With this commit, we now use 'realpath' to extract the absolute address of
the final file that the libraries may link to, and directly link to them.
A minor cosmetic correction was also made in the build rule for CFITSIO:
the long line was broken into two!
|
|
Until now, the build directory contained a 'software/' directory (that
hosted all the built software), a 'tex/' subdirectory for the final
building of the paper, and many other directories containing
intermediate/final data of the specific project. But this mixing of built
software and data is against our modularity and minimal complexity
principles: built software and built data are separate things and keeping
them separate will enable many optimizations.
With this commit, the build directory of the core Maneage branch will only
contain two sub-directories: 'software/' and 'analysis/'. The 'software/'
directory has the same contents as before and is not touched in this
commit. However, the 'analysis/' directory is new and everything created in
the './project make' phase of the project will be created inside of this
directory.
To facilitate easy access to these top-level built directories, two new
variables are defined at the top of 'initialize.mk': 'badir', which is
short for "built-analysis directory" and 'bsdir', which is short for
"built-software directory".
HOW TO IMPLEMENT THIS CHANGE IN YOUR PROJECT. It is easy: simply replace
all occurances of '$(BDIR)' in your project's subMakefiles (except the ones
below) to '$(badir)'. To confirm if everything is fine before building your
project from scratch after merging, you can run the following command to
see where 'BDIR' is used and confirm the only remaning cases.
$ grep -r BDIR reproduce/analysis/*
--> make/verify.mk: innobdir=$$(echo $$infile | sed -e's|$(BDIR)/||g'); \
--> make/initialize.mk:badir=$(BDIR)/analysis
--> make/initialize.mk:bsdir=$(BDIR)/software
--> make/initialize.mk: $$sys_rm -rf $(BDIR)
--> make/top-prepare.mk:all: $(BDIR)/software/preparation-done.mk
'BDIR' should only be present in lines of the files above. If you see
'$(BDIR)' used anywhere else, simply change it to '$(badir)'. Ofcourse, if
your project assumes BDIR in other contexts, feel free to keep it, it will
not conflict. If anything un-expected happens, please post a comment on the
link below (you need to be registered on Savannah to post a comment):
https://savannah.nongnu.org/task/?15855
One consequence of this change is that the 'analysis/' subdirectory can be
optionally mounted on a separate partition. The need for this actually came
up for some new users of Maneage in a Docker image. Docker can fix
portability problems on systems that we haven't yet supported (even
Windows!), or had a chance to fix low-level issues on. However, Docker
doesn't have a GUI interface. So to see the built PDF or intermediate data,
it was necessary to copy the built data to the host system after every
change, which is annoying during working on a project. It would also need
two copies of the source: one in the host, one in the container. All these
frustrations can be fixed with this new feature.
To describe this scenario, README.md now has a new section titled "Only
software environment in the Docker image". It explains step-by-step how you
can make a Docker image to only host the built software environment. While
your project's source, software tarballs and 'BDIR/analysis' directories
are on your host operating system. It has been tested before this commit
and works very nicely.
|
|
Until now, when building GNU Binutils on GNU Linux operating systems, we
would simply put a link to the host's core C library components (the
'*crt*' files). However, the symbolic link wasn't "forced"! So if it
already existed in the build directory, it would crash.
With this commit a '-f' option has been added to the 'ln' command and this
fixed the problem.
This bug was reported by Zahra Sharbaf.
|
|
After correctly setting Less to depend on 'ncurses', I noticed its still
not linking to Maneage's 'ncurses', but pointing to my host system's
'ncurses' (that happens to have the same version! So it would crash on a
system with a different version). This shows that like some other software,
we need to manually correct the RPATH inside Less.
With this command, the necessary call to 'patchelf' has been added and with
it, the installed 'less' command properly linked to Maneage's internal
build of 'ncurses'.
|
|
Until now, the 'less' software package (used to view large files easily on
the command-line and used by Git for things like 'git diff' or 'git log')
only depended on 'patchelf' (which is a very low-level software).
However, as Boud reported in bug #59811 [1], building less would crash with
an error saying "Cannot find terminal libraries" in some systems (including
the proposed Docker image of 'README.md' which I confirmed
afterwards). Looking into the 'configure' script of 'less', I noticed that
'less' is actually just checking for some functions provided by the ncurses
library!
With this commit, 'less' depends on 'ncurses'. I was able to confirm that
with this change, 'less' successfully builds within the Docker image.
[1] https://savannah.nongnu.org/bugs/?59811
|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
Until now, when building the high-level (optional) software, we would give
both 'CPPFLAGS' and 'C_INCLUDE_PATH' the same value/directory in
'high-level.mk'. But we recently found that on macOS's C compiler
('clang'), if a directory is included in both 'CPPFLAGS' and
'C_INCLUDE_PATH', then that directory is ignored in 'CPPFLAGS' (which has
higher priority). This caused linking problems when the version of a
software on the host was different from the Maneage version.
With this commit, 'C_INCLUDE_PATH' is not set on macOS any more and this
fixed the problem on the reported systems.
This bug was fixed with the help of Mohammad Akhlaghi and Mahdieh Navabi.
|
|
Less is rarely used in non-interactive mode and is primarily intended for
interactively viewing large files. So its need within Maneage (for batch
processing) wasn't often felt until now. However, when running './project
shell' (which completely closes-off the outside environment), or building a
Maneage'd project within a minimal container that doesn't have less, it
becomes hard to use Git (and in particular its 'diff' output which depends
on 'less').
With this commit, Less has been added as a dependency of Git in
'basic.mk'. In total its built product is roughly 800KB and builds within a
second or two. So it isn't a burden on any project. But it can be very
useful when the projects are being developed within the Maneage environment
itself.
|
|
In a recent build on a macOS, we recognized that Texinfo needs the
'libintl.h' headers of Gettext. However, Gettext depends on M4, and until
now we had set M4 to depend on Texinfo. Therefore adding Gettext as a
dependency of Texinfo would cause a circular dependency.
On the macOS, we temporarily disabled M4's Texinfo dependency, and the
build went through. I also checked on my GNU/Linux system: temporarily
renamed all Texinfo built files from my system and done a clean build of M4
and it succeeded. To be further safe, I built Maneage from this commit
(where M4 doesn't depend on Texinfo) in a Docker container, and it went
through with no problems. So the current M4 version indeed doesn't need
Texinfo. I think adding Texinfo as a dependency of M4 was a historic issue
from the early days.
In the process, I also cleaned 'basic.mk' a little:
- A "# Level N" comment was added on top of each group of software that
can be built in parallel (generally).
- GNU Nano was moved to the end of the file (to be "Level 6").
- Some comments were edited in some places.
|
|
Tcl/Tk are a set of tools to provide Graphic User Interface (GUI) support
in some software. But they are not yet natively built within Maneage,
primarily because we have higher-priority work right now. GUI tools in
general aren't high on our priority list right now because GUI tools are
generally good for human interaction (which is contrary to the reproducible
philosophy), not automatic analysis (a core concept in reproducibility). So
even later, when we do include Tcl/Tk in Maneage, their direct usage will
be discouraged.
Until this commit, because we don't yet build Tcl/Tk, the default maneage
install of the statistical package R failed on a Debian Stretch, with 6227
repeats of the line:
'/usr/lib//tcl8.5/tclConfig.sh: line 2: dpkg-architecture:
command not found'
To fix this problem (atleast until Tcl/Tk is installed within Maneage), R
is now configured with the '--without-tcltk' option which fixed the
problem. Please see the description above the R installation instructions
in 'reproduce/software/make/high-level.mk' for more.
|
|
While a project is under development, the raw analysis software are not the
only necessary software in a project. We also need tools to all the edit
plain-text files within the Maneaged project. Usually people use their
operating system's plain-text editor. However, when working on the project
on a new computer, or in a container, the plain-text editors will have
different versions, or may not be present at all! This can be very annoying
and frustrating!
With this commit, Maneage now installs GNU Nano as part of the basic
tools. GNU Nano is a very simple and small plain text editor (the installed
size is only ~3.5MB, and it is friendly to new users). Therefore, any
Maneaged project can assume atleast Nano will be present (in particular
when no editor is available on the running system!). GNU Emacs and VIM
(both without extra dependencies, in particular without GUI support) are
also optionally available in 'high-level.mk' (by adding them to
'TARGETS.conf').
The basic idea for the more advanced editors (Emacs and VIM) is that
project authors can add their favorite editor while they are working on the
project, but upon publication they can remove them from 'TARGETS.conf'.
A few other minor things came up during this work and are now also fixed:
- The 'file' program and its libraries like 'libmagic' were linking to
system's 'libseccomp'! This dependency then leaked into Nano (which
depends on 'libmagic'). But this is just an extra feature of 'file',
only for the Linux kernel. Also, we have no dependency on it so far. So
'file' is not configured to not build with 'libseccomp'.
- A typo was fixed in the line where the physical core information is
being read on macOS.
- The top-level directories when running './project shell' are now quoted
(in case they have special characters).
|
|
Until now, no machine-related specifications were being documented in the
workflow. This information can become helpful when observing differences in
the outcome of both software and analysis segments of the workflow by
others (some software may behave differently based on host machine).
With this commit, the host machine's 'hardware class' and 'byte-order' are
collected and now available as LaTeX macros for the authors to use in the
paper. Currently it is placed in the acknowledgments, right after
mentioning the Maneage commit.
Furthermore, the project and configuration scripts are now capable of
dealing with input directory names that have SPACE (and other special
characters) by putting them inside double-quotes. However, having spaces
and metacharacters in the address of the build directory could cause
build/install failure for some software source files which are beyond the
control of Maneage. So we now check the user's given build directory
string, and if the string has any '@', '#', '$', '%', '^', '&', '*', '(',
')', '+', ';', and ' ' (SPACE), it will ask the user to provide a different
directory.
|
|
Until now, if the software source tarballs already existed on the system
they would be copied inside the project. However, the software source
tarballs are sometimes/mostly larger than their actual product and can
consume significant space (~375 MB in the core branch!).
With this commit, when the software are present on the system, their
symbolic link will be placed in 'BDIR/software/tarballs', not a full
copy. Also, because the tarballs in software tarball directory may
themselves be links, we use 'realpath' to find the final place of the
actual file and link to that location. Therefore if 'realpath' can't be
found (prior to installing Coreutils in Maneage), we will copy the tarballs
from the given software tarball directory. After Maneage has installed
Coreutils, the project's own 'realpath' will be used. Of course, if the
software are downloaded, their full downloaded copy will be kept in
'BDIR/software/tarballs', nothing has changed in the downloading scenario.
|
|
It was a long time that the Maneage software versions hadn't been updated.
With this commit, the versions of all basic software were checked and 17 of
that had newer versions were updated. Also, 16 high-level programs and
libraries were updated as well as 7 Python modules. The full list is
available below.
Basic Software (affecting all projects)
---------------------------------------
bash 5.0.11 -> 5.0.18
binutils 2.32 -> 2.35
coreutils 8.31 -> 8.32
curl 7.65.3 -> 7.71.1
file 5.36 -> 5.39
gawk 5.0.1 -> 5.1.0
gcc 9.2.0 -> 10.2.0
gettext 0.20.2 -> 0.21
git 2.26.2 -> 2.28.0
gmp 6.1.2 -> 6.2.0
grep 3.3 -> 3.4
libbsd 0.9.1 -> 0.10.0
ncurses 6.1 -> 6.2
perl 5.30.0 -> 5.32.0
sed 4.7 -> 4.8
texinfo 6.6 -> 6.7
xz 5.2.4 -> 5.2.5
Custom programs/libraries
-------------------------
astrometrynet 0.77 -> 0.80
automake 0.16.1 -> 0.16.2
bison 3.6 -> 3.7
cfitsio 3.47 -> 3.48
cmake 3.17.0 -> 3.18.1
freetype 2.9 -> 2.10.2
gdb 8.3 -> 9.2
ghostscript 9.50 -> 9.52
gnuastro 0.11 -> 0.12
libgit2 0.28.2 -> 1.0.1
libidn 1.35 -> 1.36
openmpi 4.0.1 -> 4.0.4
R 3.6.2 -> 4.0.2
python 3.7.4 -> 3.8.5
wcslib 6.4 -> 7.3
yaml 0.2.2 -> 0.2.5
Python modules
--------------
cython 0.29.6 -> 0.29.21
h5py 2.9.0 -> 2.10.0
matplotlib 3.1.1 -> 3.3.0
mpi4py 3.0.2 -> 3.0.3
numpy 1.17.2 -> 1.19.1
pybind11 2.4.3 -> 2.5.0
scipy 1.3.1 -> 1.5.2
|
|
Prior to this commit, compilation of OpenMPI used the default OpenMPI
choices of deciding which libraries should be used in relating to a job
scheduler [1] (such as Slurm [2]). Given that the user on a multi-user
cluster has to accept the sysadmin's choice of a job scheduler, the
question of whether to (1) link with OpenMPI's own libraries (and increase
the reproducibility of the science project) or rather (2) link with the
sysadmin managed libraries (more likely to be compatible with the host's
job scheduler), is an open question of which the best strategy for
reproducibility needs to be debated and studied.
In this commit, strategy (1) is adopted. The options '--withpmix=internal'
and '--with-hwloc=internal' are added to the configure command. The working
assumption is that the Maneage version of OpenMPI is likely to be modern
enough to be compatible with the native job scheduler such as
Slurm. Compilation without any 'pmix' option gave a fail in at least one
case; it appears that an external pmix library was sought by the configure
script.
As of OpenMPI 4.0.1, the internal libevent library is used by default, so
there appears to be no option to force it to be chosen internally.
This commit also includes the option '--without-verbs'. This option
removes a library related to "infiniband", "verbs", "openib" and "BTL";
this library appears to be deprecated. See [3], [4] for discussion.
Please add feedback and discussion to the Maneage task about openmpi
linking strategies (1) (internal) and (2) (external) at Savannah [5].
[1] https://en.wikipedia.org/wiki/Job_scheduler#Batch_queuing_for_HPC_clusters
[2] https://en.wikipedia.org/wiki/Slurm_Workload_Manager - To avoid a name
clash, 'slurm-wlm' is the metapackage in Debian for the client
commands, the compute node daemon, and the central node daemon. An
unrelated package 'slurm' also exists.
[3] https://www-lb.open-mpi.org/faq/?category=openfabrics#ofa-device-error
[4] https://www-lb.open-mpi.org/faq/?category=building
[5] https://savannah.nongnu.org/task/index.php?15737
|
|
Until now, if a project needed the healpy software package, Maneage would
crash with the following error message (abridged for full name in build
directory). This was caused by a typo in the version of 'healpix' (the
dependency of 'healpy').
make: *** No rule to make target '.../version-info/proglib/healpix-'
With this commit, the typo in line 334 of 'python.mk' is fixed, so that
when '$(ipydir)/healpy-$(healpy-version)' gets called it correctly searches
for a rule to make '$(ibidir)/healpix-$(healpix-version)'.
|
|
In the previous commit (Commit 1bc00c9: Only using clang in macOS systems
that also have GCC) we set the used C compiler for high-level programs to
be 'clang' on macOS systems. But I forgot to do the same kind of change in
the configure script (to prefer 'clang' when we are testing for a C
compiler on the host).
With this commit, the compiler checking phases of the configure script have
been improved, so on macOS systems, we now first search for 'clang', then
search for 'gcc'.
While doing this, I also noticed that the 'rpath' checking command was done
before we actually define 'instdir'!!! So in effect, the 'rpath' directory
was being set to '/lib'! So with this commit, this test has been taken to
after defining 'instdir'.
|
|
Until now, when Maneage was built on a macOS that had both a clang and GCC,
we would make links to both. But this cause many conflicts in some
high-level programs (for example Numpy and etc, all the programs where we
have explicity set 'export CC=clang' before the build recipe). This happens
because the GCC that is built on a macOS isn't complete for some
operations.
To fix this problem, when we are on a macOS, we explicity set 'gcc' to
point to 'clang' and 'g++' to point to 'clang++'. We also don't link to the
host's C-preprocessor ('cpp') on macOS systems because this is only a GNU
feature and using the GNU CPP is also known to have some basic
problems. For example this was reported by Mahdieh Nabavi (which was the
main trigger for this work):
ld: Symbol not found: ___keymgr_global
Referenced from: /Users/Mahdieh/build/software/installed/bin/cpp
Expected in: /usr/lib/libSystem.B.dylib
Also, to avoid linking to another link on the host tools (in the 'makelink'
function of 'basic.mk'), we are now using 'realpath'.
|
|
Until now, when reading the host's PATH environment variable we weren't
accounting for directory names with a space character. This was most
prominently visible in the 'low-level-links' step where we put links to
some core system components into the project's build directory (mainly for
prorietary systems like macOS).
To address the problem, double quotations have been placed around the part
that we extract 'ccache' from the PATH, and the part where we make the
symbolic link. In the process the comments above 'makelink' were made more
clear and 'low-level-links' now depends on 'grep' (which is the
highest-level program it uses).
This bug was reported by Mahdieh Navabi.
|
|
Until this commit, once Libidn was installed, insted of its own name and
version, the name and version of Libjpeg were saved (in the target if
Libidn). This robably come from a copy/paste of the rule.
With this commit, this minor bug has been corrected. I also added my name
as an author of `reproduce/software/make/xorg.mk' Makefile since I added
some code there.
|
|
After recently adding util-linux to Maneage build-tree, we had forgot to
delete the unpacked and built source directory after it was installed! This
has been corrected with this commit.
|
|
Until now, in order to build Ghostscript, the project used the host's Xorg
libraries. This was because we hadn't yet added the necessary build rules
for them.
With this commit, the instructions to build the necessary Xorg libraries
for Ghostscript have also been added. Also, the shared Ghostscript library
has been built with this commit and two sets of standard fonts are also
included, setting us on the path to build TeXLive from source later.
This task was done with the help and support of Raul Infante-Sainz.
|
|
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause
conflicts to your project if you have changed the software building
Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and
'python.mk'). If your project has only added analysis, it shouldn't be
affected.
This is a large commit, involving a long series of corrections in a
differnt branch which is now finally being merged into the core Maneage
branch. All changes were related and came up naturally as the low-level
infrastructure was improved. So separating them in the end for the final
merge would have been very time consuming and we are merging them as one
commit.
In general, the software building Makefiles are now much more easier to
read, modify and use, along with several new features that have been
added. See below for the full list.
- Until now, Maneage needed the host to have a 'make' implementation
because Make was necessary to build Lzip. Lzip is then used to
uncompress the source of our own GNU Make. However, in the
minimalist/slim versions of operating systems (for example used to build
Docker images) Make isn't included by default. Since Lzip was the only
program before our own GNU Make was installed, we consulting Antonio
Diaz Diaz (creator of Lzip) and he kindly added the necessary
functionality to a new version of Lzip, which we are using now. Hence we
don't need to assume a Make implementation on the host any more. With
this commit, Lzip and GNU Make are built without Make, allowing
everything else to be safely built with our own custom version of GNU
Make and not using the host's 'make' at all.
- Until recently (Commit 3d8aa5953c4) GNU Make was built in
'basic.mk'. Therefore 'basic.mk' was written in a way that it can be
used with other 'make' implementations also (i.e., important shell
commands starting with '&&' and ending in '\' without any comments
between them!). Furthermore, to help in style uniformity, the rules in
'high-level.mk' and 'python.mk' also followed a similar structure. But
due to the point above, we can now guarantee that GNU Make is used from
the very first Makefile, so this hard-to-read structure has been removed
in the software build recipes and they are much more readable and
edit-friendly now.
- Until now, the default backup servers where at some fixed URLs, on our
own pages or on Gitlab. But recently we uploaded all the necessary
software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is
more suitable for this task (it promises longevity, has a fixed DOI,
while allowing us to add new content, or new software tarball
versions). With this commit, a small script has been written to extract
the most recent Zenodo upload link from the Zenodo DOI and use it for
downloading the software source codes.
- Until now, we primarily used the webpage of each software for
downloading its tarball. But this caused many problems: 1) Some of them
needed Javascript before the download, 2) Some URLs had a complex
dependency on the version number, 3) some servers would be randomly down
for maintenance and etc. So thanks to the point above, we now use the
Zenodo server as the primary download location. However, if a user wants
to use a custom software that is not (yet!) in Zenodo, the download
script gives priority to a custom URL that the users can give as Make
variables. If that variable is defined, then the script will use that
URL before going onto Zenodo. We now have a special place for such URLs:
'reproduce/software/config/urls.conf'. The old URLs (which are a good
documentation themselves) are preserved here, but are commented by
default.
- The software source code downloading and checksum verification step has
been moved into a Make function called 'import-source' (defined in the
'build-rules.mk' and loaded in all software Makefiles). Having taken all
the low-level steps there, I noticed that there is no more need for
having the tarball as a separate target! So with this commit, a single
rule is the only place that needs to be edited/added (greatly
simplifying the software building Makefiles).
- Following task #15272, A new option has been added to the './project'
script called '--all-highlevel'. When this option is given, the contents
of 'TARGETS.conf' are ignored and all the software in Maneage are built
(selected by parsing the 'versions.conf' file). This new option was
added to confirm the extensive changes made in all the software building
recipes and is great for development/testing purposes.
- Many of the software hadn't been tested for a long time! So after using
the newly added '--all-highlevel', we noticed that some need to be
updated. In general, with this commit, 'libpaper' and 'pcre' were added
as new software, and the versions of the following software was updated:
'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in'
shell script was added in 'reproduce/software/shell/' which is installed
with 'libpaper'.
- Even though we intentionally add the necessary flags to add RPATH inside
the built executable at compilation time, some software don't do it
(different software on different operating systems!). Until now, for
historical reasons this check was done in different ways for different
software on GNU/Linux sytems. But now it is unified: if 'patchelf' is
present we apply it. Because of this, 'patchelf' has been put as a
top-level prerequisite, right after Tar and is installed before anything
else.
- In 'versions.conf', GNU Libtool is recognized as 'libtool', but in
'basic.mk', it was 'glibtool'! This caused many confusions and is
corrected with this commit (in 'basic.mk', it is also 'libtool').
- A new argument is added to the './project' script to allow easy loading
of the project's shell and environment for fast/temporary testing of
things in the same environment as the project. Before activating the
project's shell, we completely remove all host environment variables to
simulate the project's environment. It can be called with this command:
'./project shell'. A simple prompt has also been added to highlight that
the user is using the Maneage shell!
|
|
In Commit 105467fe6402 (Software tarballs are downloaded even if not
built), we introduced tests to download the tarballs of software even if
they don't need to be built on the respective host. However some small
typos in the checks existed that could cause a crash on macOS. In
particular in the building of PatchELF and libbsd we had forgot to add the
necessary 'x' before the 'yes' in the conditional to check if a we are on
macOS or not.
With this commit these two checks have been corrected. Also, in the
building of 'isl' and 'mpc', we now check for 'host_cc' (signifying that
the user wants to use their host C compiler for the high-level step)
instead of 'on_mac_os'. The reason is that even on non-macOS systems, a
user may not want to build the C compiler from scratch and use the
'--host-cc' option. In such cases, they don't need to compile 'isl' and
'mpc'.
|
|
Some low-level software aren't necessary on some operating systems, for
example GCC can't be built on macOS, hence we don't build it and the
GCC-only dependencies. Also, on GNU/Linux systems users could configure
with '--host-cc' to avoid all the time it takes to build GCC when doing a
fast test.
Until now, in such cases not only was the software not installed, but the
tarballs of the software were also not downloaded. Hence making the output
of '--dist-software' incomplete (as in bug #58561).
With this commit, we now import all the necessary tarballs, when the
software isn't necessary for the particular system, it won't be built or
cited, but its tarball will be present anyway, thus allowing the output of
'--dist-software' to be complete.
|
|
Until now, when adding the necessary library flags to the build of XLSX
I/O, we were effectively over-writing the 'LDFLAGS' variables. So the
compiler was effectively not being told where to look for the necessary
libraries.
With this commit, to fix the problem, we now append the new linking flags
to LDFLAGS in XLSX I/O's build, not over-write it.
|
|
After trying a clean build of Maneage in a Docker image (with a minimal
debian:stable-20200607-slim OS), I noticed that the building of OpenSSL is
failing because it doesn't find the proper Perl functionality. To fix it,
with this commit, Perl is set as a prerequisite of OpenSSL and this fixed
the problem.
|
|
Until now, Maneage would only build Flock before building everything else
using Make (calling 'basic.mk') in parallel. Flock was necessary to avoid
parallel downloads during the building of software (which could cause
network problems). But after recently trying Maneage on FreeBSD (which is
not yet complete, see bug #58465), we noticed that the BSD implemenation of
Make couldn't parse 'basic.mk' (in particular, complaining with the 'ifeq'
parts) and its shell also had some peculiarities.
It was thus decided to also install our own minimalist shell, Make and
compressor program before calling 'basic.mk'. In this way, 'basic.mk' can
now assume the same GNU Make features that high-level.mk and python.mk
assume. The pre-make building of software is now organized in
'reproduce/software/shell/pre-make-build.sh'.
Another nice feature of this commit is for macOS users: until now the
default macOS Make had problems for parallel building of software, so
'basic.mk' was built in one thread. But now that we can build the core
tools with GNU Make on macOS too, it uses all threads. Furthermore, since
we now run 'basic.mk' with GNU Make, we can use '.ONESHELL' and don't have
to finish every line of a long rule with a backslash to keep variables and
such.
Generally, the pre-make software are now organized like this: first we
build Lzip before anything else: it is downloaded as a simple '.tar' file
that is not compressed (only ~400kb). Once Lzip is built, the pre-make
phase continues with building GNU Make, Dash (a minimalist shell) and
Flock. All of their tarballs are in '.tar.lz'. Maneage then enters
'basic.mk' and the first program it builds is GNU Gzip (itself packaged as
'.tar.lz'). Once Gzip is built, we build all the other compression software
(all downloaded as '.tar.gz'). Afterwards, any compression standard for
other software is fine because we have it.
In the process, a bug related to using backup servers was found in
'reproduce/analysis/bash/download-multi-try' for calling outside of
'basic.mk' and removed Bash-specific features. As a result of that bug-fix,
because we now have multiple servers for software tarballs, the backup
servers now have their own configuration file in
'reproduce/software/config/servers-backup.conf'. This makes it much easier
to maintain the backup server list across the multiple places that we need
it.
Some other minor fixes:
- In building Bzip2, we need to specify 'CC' so it doesn't use 'gcc'.
- In building Zip, the 'generic_gcc' Make option caused a crash on FreeBSD
(which doesn't have GCC).
- We are now using 'uname -s' to specify if we are on a Linux kernel or
not, if not, we are still using the old 'on_mac_os' variable.
- While I was trying to build on FreeBSD, I noticed some further
corrections that could help. For example the 'makelink' Make-function
now takes a third argument which can be a different name compared to the
actual program (used for examle to make a link to '/usr/bin/cc' from
'gcc'.
- Until now we didn't know if the host's Make implementation supports
placing a '@' at the start of the recipe (to avoid printing the actual
commands to standard output). Especially in the tarball download phase,
there are many lines that are printed for each download which was really
annoying. We already used '@' in 'high-level.mk' and 'python.mk' before,
but now that we also know that 'basic.mk' is called with our custom GNU
Make, we can use it at the start for a cleaner stdout.
- Until now, WCSLIB assumed a Fortran compiler, but when the user is on a
system where we can't install GCC (or has activated the '--host-cc'
option), it may not be present and the project shouldn't break because
of this. So with this commit, when a Fortran compiler isn't present,
WCSLIB will be built with the '--disable-fortran' configuration option.
This commit (task #15667) was completed with help/checks by Raul
Infante-Sainz and Boud Roukema.
|
|
Until this commit, when the user had a previous TeXLive tarball already
present (in their software-tarball directory) compared to the CTAN server,
the project crashed in the configure phase. This was because TeXLive is
updated yearly and we don't yet install TeXLive from source (currently we
use its own package manager, but we plan to fix this in task #15267).
With this commit, we fix the problem by checking the cause of the crash
during the installation of TeX. If the crash is due to this particular
error, we ignore the old tarball and download the new one and install it
(the old one is still kept in '.build/software/tarballs', but will get a
'-OLD' in its name. This probem was recurrent, and every year that TeXLive
is updated, the previous tarball had to be removed manually! But with this
commit, this is done automatically. The detection and fix of this bug has
been possible with the help of Mohammad Akhlaghi, thanks!
|
|
One of the main reasons to building Maneage is to properly
acknowledge/attribute the authors of software in research. So we have
adopted a standard of never referring to the GNU-based operating systems
running the Linux kernel simply as "Linux", we avoid terms like "Open
Sourse" and use Free Software instead (in the same spirit).
With this commit, a few instances of the cases above have been corrected,
they had slipped through our fingers when we initially imported them into
the project. In the special case of the "Journal for Open Source Software",
we simply replaced it with its abbreviation (JOSS). This was done because
in effect we were generally using journal name abbreviations in almost all
the citations already. To avoid any inconsistancies, the names of the three
other journals that weren't abbreviated are also abbreviated.
|
|
With this commit, Maneage now includes instructions to build the memory
tracing tool Valgrind and the program 'patch' (to apply corrections/patches
in text files and in particular the sources of programs).
For this version of Valgrind, some patches were necessary for an interface
with OpenMPI 2.x (which is the case now). Also note that this version of
Valgrind's checks can fail with GCC 10.1.x (when using '--host-cc'), and
the failures aren't due to internal problems but due to how the tests are
designed (https://bugs.gentoo.org/707598). So currently if any of
Valgrind's checks fail, Maneage still assumes that Valgrind was built and
installed successfully.
While testing on macOS, we noticed that it needs the macOS-specific 'mig'
program which we can't build in Maneage. DESCRIPTION: The mig command
invokes the Mach Interface Generator to generate Remote Procedure Call
(RPC) code for client-server style Mach IPC from specification files. So a
symbolic link to the system's 'mig' is now added to the project's programs
on macOS systems.
This commit's build of Patch and Valgrind has been tested on two GNU/Linux
distributions (Debian and ArchLinux) as well as macOS.
Work on this commit started by Boud Roukema, but also involved tests and
corrections by Mohammad Akhlaghi and Raul Infante-Sainz.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until this commit, Scamp was installed with the option
`--enable-plplot=yes' (the default). However, Maneage does not have PLplot
included. As it is possible to install Scamp without PLplot (in that case
it won't generate plots), with this commit this option has been set to
`no'. As a consequence, Scamp will be installed even if the host system
does not have PLplot without crashing (but it won't make any plot).
|
|
Until now Maneage used the host's GNU Gettext if it was present. Gettext is
a relatively low-level software that enables programs to print messages in
different languages based on the host environment. Even though it has not
direct effect on the running of the software for Maneage and the lanugage
environment in Maneage is pre-determined, it is necessary to have it
because if the basic programs see it in the host they will link with it and
will have problems if/when the host's Gettext is updated.
With this commit (which is actually a squashed rebase of 9 commits by Raul
and Mohammad), Gettext and its two extra dependencies (libxml2 and
libunistring) are now installed within Maneage as a basic software and
built before GNU Bash. As a result, all programs built afterwards will
successfully link with our own internal version of Gettext and
libraries. To get this working, some of the basic software dependencies had
to updated and re-ordered and it has been tested in both GNU/Linux and
macoS.
Some other minor issues that are fixed with this commit
- Until this commit, when TeX was not installed, the warning message
saying how to run the configure step in order to re-configure the
project was not showing the option `-e'. However, the use of this option
is more convenient than entering the top-build directory and etc every
time. So with this commit, the warning message has been changed in order
use the option `-e' in the re-configure of the project.
- Until now, on macOS systems, Bash was not linking with our internally
built `libncurses'. With this commit, this has been fixed by setting
`--withcurses=yes' for Bash's configure script.
|
|
Until now there we had manually inserted a `\' before the `_' of sip_tpv
program. However, we also recently added a step in the configure script to
add a `\' before every `_' when writing the final LaTeX macro. This was
because some C compilers (when the host's is used) have an `_' in their
version that we had no control over.
With this commit, the `\' is removed from `sip_tpv' in its build-rule and
we let the backslash be inserted automatically.
|
|
Until now, when you changed the version of a software in an already-built
system, its tarball would be downloaded, but it wouldn't actually
build. The only way would be to force the build by deleting the main target
of that file (under `.local/version-info/TYPE/PROGRAM'). This was because
the tarballs were an order-only prerequisite which was implemented some
time ago based on some theoretical argument that if the tarball dates
changes, the software should not be rebuilt (because we check the
checksum).
However, the problems this causes are more than those it solves: Users may
forget to delete the main target of the program and mistakenly think that
they are using the new version. The fact that all the numbers going into
the paper also contain this number further hides this.
With this commit, tarballs are no longer order-only and any time a version
of a software is updated, it will be automatically built and not cause
confusion and manual intervention by the users. As a result of this change,
I also had to correct the way we find the tarball from the list of
prerequisites.
|
|
Until this commit, the configure step would fail with an error when
compiling libgit2 on a test system. The origin of this bug, on the OS that
was tested, appears to be that in OpenSSL Version 1.1.1a, openssl/ec.h
fails to include openssl/openconf.h. The bug is described in more detail at
https://savannah.nongnu.org/bugs/index.php?58263
With this commit, this is fixed by manually inserting a necessary
components. In particular, `sed` is used to insert a preprocessor
instruction into `openssl/openconf.h`, defining `DEPRECATED_1_2_0(f)`, for
an arbitrary section of code `f`, to include that code rather than exclude
it or warn about it.
This commit is valid provided that openssl remains at a version earlier
than 1.2.0. Starting at version 1.2.0, deprecation warnings should be run
normally. We have thus moved the version of OpenSSL in `versions.conf' to
the section for programs that need to be manually checked for version
updates with a note to remind the user when reaching that version.
Other packages that use OpenSSL may benefit from this commit, not just
libgit2.
|
|
Until now, if GCC couldn't be built for any reason, Maneage would crash and
the user had no way forward. Since GCC is complicated, it may happen and is
frustrating to wait until the bug is fixed. Also, while debugging Maneage,
when we know GCC has no problem, because it takes so long, it discourages
testing.
With this commit, we have re-activated the `--host-cc' option. It was
already defined in the options of `./project', but its affect was nullified
by hard-coding it to zero in the configure script on GNU/Linux systems. So
with this commit that has been removed and the user can use their own C
compiler on a GNU/Linux operating system also.
Furthermore, to inform the user about this option and its usefulness, when
GCC fails to build, a clear warning message is printed, instructing the
user to post the problem as a bug and telling them how to continue building
the project with the `--host-cc' option.
|
|
Similar to the previous commit (e43e3291483699), following a change made
yesterday in the identification of software names from their tarballs, a
few other problematic names are corrected with this commit: `apr-util',
HDF5, TeX Live's installation tarball and `rpcsvc-proto'.
Even though we have visually checked the list of software, other
unidentified similar cases may remain and will be fixed when found in
practice.
|
|
Until Commit 3409a54 (from yesterday), pkg-config was found correctly in
`reproduce/software/make/basic.mk` by searching for `pkg`. However, commit
a21ea20 made an improvement in the regular expression for relating package
names and download filenames, and the string `pkg-config` with the new
regex no longer simplifies to `pkg`. The result of this was that the
basic.mk could not find `pkg-config` in the list of packages, since it was
still listed as `pkg`. This blocked downloading for a system without
pkg-config preloaded.
With this commit (of just a few bytes), the bug is fixed.
|
|
Until now, the sed script for determining URL download rules in the three
software building Makefiles (`basic.mk', `high-level.mk' and `python.mk')
considered package names such as `fftw-3...` and `fftw2-2.1...` to be
identical. As the example above shows, this would make it hard to include
some software that may hav conflicting non-number names.
With this commit, the SED script that is used to separate the version from
the tarball name only matches numbers that are after a dash
(`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but
`fftw-3-...` and `fftw2-2.1...` to be different. As a result of this
change, the `elif' check for some of the other programs like `m4', or
`help2man' was also corrected in all three Makefiles.
While doing this check on all the software, we noticed that `zlib-version'
is being repeated two times in `version.conf' so it was removed. It caused
no complications, because both were the same number, but could lead to bugs
later.
|
|
Until now, throughout Maneage we were using the old name of "Reproducible
Paper Template". But we have finally decided to use Maneage, so to avoid
confusion, the name has been corrected in `README-hacking.md' and also in
the copyright notices.
Note also that in `README-hacking.md', the main Maneage branch is now
called `maneage', and the main Git remote has been changed to
`https://gitlab.com/maneage/project' (this is a new GitLab Group that I
have setup for all Maneage-related projects). In this repository there is
only one `maneage' branch to avoid complications with the `master' branch
of the projects using Maneage later.
|
|
Of the GCC dynamically linked libraries we need to manually add RPATH to
all and for `libstdc++' we also need to tell it to link with
`libiconv'. Until now, the conditional to check for libstdc++ was not
working and thus libiconv wasn't been added to it.
With this commit the conditional has been corrected and is now
working. Also, to help in reading the logs, an echo statement was added
after every call to PatchELF.
|
|
Until now, when a the raw tarball of some software wasn't usable, I would
put it under my own webpage, or `akhlaghi.org/reproduce-software'. That
same address was also used as a backup server. However, now the project has
a proper name: Maneage. So I changed the directory on my own server to
`akhlaghi.org/maneage-software'.
With this commit, this new address has replaced the old one. But to avoid
crashes in projects that haven't yet merged with the main Maneage branch,
the old `reproduce-software' still works (its actually a symbolic link to
the new directory now).
|
|
Until a few commits ago, PatchELF was built statically because it was used
to patch `libstdc++' at the end of the GCC building phase, but PatchELF
also depends on `libstdc++', so it would crash. However, recently when
patching the GCC libraries, we don't directly apply Patchelf to the
library, first we copy it to a temporary place, do the patching, then put
it in its proper place. So the problem above won't happen any more.
With this commit, I am thus removing the static flag from patchelf and
letting it built dynamically all the time. The main problem was that some
systems don't have a static C++ library, so PatchELF couldn't be built
statically. Instead of adding more checks, we just fixed the core
foundation of the problem.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
|
In the previous commit, I removed the year from the basic installation of
TeXLive packages, but I forgot to correct this in the high-level TeXLive
packages! This is corrected with this commit.
|
