| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This commit primarily affects the configuration step of Maneage'd projects,
and in particular, updated versions of the many of the software (see
P.S.). So it shouldn't affect your high-level analysis other than the
version bumps of the software you use (and the software's possibly
improve/changed behavior).
The following software (and thus their dependencies) couldn't be updated as
described below:
- Cryptography: isn't building because it depends on a new
setuptools-rust package that has problems
(https://savannah.nongnu.org/bugs/index.php?61731), so it has been
commented in 'versions.conf'.
- SecretStorage: because it depends on Cryptography.
- Keyring: because it depends on SecretStorage.
- Astroquery: because it depends on Keyring.
This is a "squashed" commit after rebasing a development branch of 60
commits corresponding to a roughly two-month time interval. The following
people contributed to this branch.
- Boudewijn Roukema added all the R software infrastructure and the R
packages, as well as greatly helping in fixing many bugs during the
update.
- Raul Infante-Sainz helped in testing and debugging the build.
- Pedram Ashofteh Ardakani found and fixed a bug.
- Zahra Sharbaf helped in testing and found several bugs.
Below a description of the most noteworthy points is given.
- Software tarballs: all updated software now have a unified format
tarball (ustar; if not possible, pax) and unified compression (Lzip) in
Maneage's software repository in Zenodo
(https://doi.org/10.5281/zenodo.3883409). For more on this See
https://savannah.nongnu.org/task/?15699 . This won't affect any extra
software you would like to add; you can use any format recognized by
GNU Tar, and all common compression algorithms. This new requirement is
only for software that get merged to the core Maneage branch.
- Metastore (and thus libbsd and libmd) moved to highlevel: Metastore
(and the packages it depends on) is a high-level product that is only
relevant during the project development (like Emacs!): when the user
wants the file meta data (like dates) to be unchanged after checking
out branches. So it should be considered a high-level software, not
basic. Metastore also usually causes many more headaches and error
messages, so personally, I have stopped using it! Instead I simply
merge my branches in a separate clone, then pull the merge commit: in
this way, the files of my project aren't re-written during the checkout
phase and therefore their dates are untouched (which can conflict with
Make's dates on configuration files).
- The un-official cloned version of Flex (2.6.4-91 until this commit) was
causing problems in the building of Netpbm, so with this commit, it has
been moved back to version 2.6.4.
- Netpbm's official page had version 10.73.38 as the latest stable
tarball that was just released in late 2021. But I couldn't find our
previously-used version 10.86.99 anywhere (to see when it was released
and why we used it! Its at last more than one year old!). So the
official stable version is being used now.
- Improved instructions in 'README.md' for building software environment
in a Docker container (while having project source and output data
products on the local system; including the usage of the host's
'/dev/shm' to speed up temporary operations).
- Until now, the convention in Maneage was to put eight SPACE characters
before the comment lines within recipes. This was done because by
default GNU Emacs (also many other editors) show a TAB as eight
characters. However, in other text editors, online browsers, or even
the Git diff, a TAB can correspond to a different number of
characters. In such cases, the Maneage recipes wouldn't look too
interesting (the comments and the recipe commands would show a
different indentation!).
With this commit, all the comment lines in the Makefiles within the
core Maneage branch have a hash ('#') as their first character and a
TAB as the second. This allows the comment lines in recipes to have the
same indentation as code; making the code much more easier to read in a
general scenario including a 'git diff' (editor agnostic!).
P.S. List of updated software with their old and new versions
- Software with no version update are not mentioned.
- The old version of newly added software are shown with '--'.
Name (Basic) Old version New version
------------ ----------- -----------
Bzip2 1.0.6 1.0.8
CURL 7.71.1 7.79.1
Dash 0.5.10.2 0.5.11.5
File 5.39 5.41
Flock 0.2.3 0.4.0
GNU Bash 5.0.18 5.1.8
GNU Binutils 2.35 2.37
GNU Coreutils 8.32 9.0
GNU GCC 10.2.0 11.2.0
GNU M4 1.4.18 1.4.19
GNU Readline 8.0 8.1.1
GNU Tar 1.32 1.34
GNU Texinfo 6.7 6.8
GNU diffutils 3.7 3.8
GNU findutils 4.7.0 4.8.0
GNU gmp 6.2.0 6.2.1
GNU grep 3.4 3.7
GNU gzip 1.10 1.11
GNU libunistring 0.9.10 1.0
GNU mpc 1.1.0 1.2.1
GNU mpfr 4.0.2 4.1.0
GNU nano 5.2 6.0
GNU ncurses 6.2 6.3
GNU wget 1.20.3 1.21.2
Git 2.28.0 2.34.0
Less 563 590
Libxml2 2.9.9 2.9.12
Lzip 1.22-rc2 1.22
OpenSLL 1.1.1a 3.0.0
Patchelf 0.10 0.13
Perl 5.32.0 5.34.0
Podlators -- 4.14
Name (Highlevel) Old version New version
---------------- ----------- -----------
Apachelog4cxx 0.10.0-603 0.12.1
Astrometry.net 0.80 0.85
Boost 1.73.0 1.77.0
CFITSIO 3.48 4.0.0
Cmake 3.18.1 3.21.4
Eigen 3.3.7 3.4.0
Expat 2.2.9 2.4.1
FFTW 3.3.8 3.3.10
Flex 2.6.4-91 2.6.4
Fontconfig 2.13.1 2.13.94
Freetype 2.10.2 2.11.0
GNU Astronomy Utilities 0.12 0.16.1-e0f1
GNU Autoconf 2.69.200-babc 2.71
GNU Automake 1.16.2 1.16.5
GNU Bison 3.7 3.8.2
GNU Emacs 27.1 27.2
GNU GDB 9.2 11.1
GNU GSL 2.6 2.7
GNU Help2man 1.47.11 1.48.5
Ghostscript 9.52 9.55.0
ICU -- 70.1
ImageMagick 7.0.8-67 7.1.0-13
Libbsd 0.10.0 0.11.3
Libffi 3.2.1 3.4.2
Libgit2 1.0.1 1.3.0
Libidn 1.36 1.38
Libjpeg 9b 9d
Libmd -- 1.0.4
Libtiff 4.0.10 4.3.0
Libx11 1.6.9 1.7.2
Libxt 1.2.0 1.2.1
Netpbm 10.86.99 10.73.38
OpenBLAS 0.3.10 0.3.18
OpenMPI 4.0.4 4.1.1
Pixman 0.38.0 0.40.0
Python 3.8.5 3.10.0
R 4.0.2 4.1.2
SWIG 3.0.12 4.0.2
Util-linux 2.35 2.37.2
Util-macros 1.19.2 1.19.3
Valgrind 3.15.0 3.18.1
WCSLIB 7.3 7.7
Xcb-proto 1.14 1.14.1
Xorgproto 2020.1 2021.5
Name (Python) Old version New version
------------- ----------- -----------
Astropy 4.0 5.0
Beautifulsoup4 4.7.1 4.10.0
Beniget -- 0.4.1
Cffi 1.12.2 1.15.0
Cryptography 2.6.1 36.0.1
Cycler 0.10.0 0.11.0+}
Cython 0.29.21 0.29.24
Esutil 0.6.4 0.6.9
Extension-helpers -- 0.1
Galsim 2.2.1 2.3.3
Gast -- 0.5.3
Jinja2 -- 3.0.3
MPI4py 3.0.3 3.1.3
Markupsafe -- 2.0.1
Numpy 1.19.1 1.21.3
Packaging -- 21.3
Pillow -- 8.4.0
Ply -- 3.11
Pyerfa -- 2.0.0.1
Pyparsing 2.3.1 3.0.4
Pythran -- 0.11.0
Scipy 1.5.2 1.7.3
Setuptools 41.6.0 58.3.0
Six 1.12.0 1.16.0
Uncertainties 3.1.2 3.1.6
Wheel -- 0.37.0
Name (R) Old version New version
-------- ----------- -----------
Cli -- 2.5.0
Colorspace -- 2.0-1
Cowplot -- 1.1.1
Crayon -- 1.4.1
Digest -- 0.6.27
Ellipsis -- 0.3.2
Fansi -- 0.5.0
Farver -- 2.1.0
Ggplot2 -- 3.3.4
Glue -- 1.4.2
GridExtra -- 2.3
Gtable -- 0.3.0
Isoband -- 0.2.4
Labeling -- 0.4.2
Lifecycle -- 1.0.0
Magrittr -- 2.0.1
MASS -- 7.3-54
Mgcv -- 1.8-36
Munsell -- 0.5.0
Pillar -- 1.6.1
R-Pkgconfig -- 2.0.3
R6 -- 2.5.0
RColorBrewer -- 1.1-2
Rlang -- 0.4.11
Scales -- 1.1.1
Tibble -- 3.1.2
Utf8 -- 1.2.1
Vctrs -- 0.3.8
ViridisLite -- 0.4.0
Withr -- 2.4.2
|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
There are many different directory trees involved in Maneage system: the
top directory, the 'reproduce/' directory and its sub-directories,
'.build/' (that point to a user-defined build area), and a possibly
user-defined input directory. Until now, in the case of a download checksum
failure, it was not immediately obvious [1] to the user *where* the file
with a failed checksum is.
To clarify to the user *where* the suspicious file is now located, this
commit adds a line to 'reproduce/analysis/make/download.mk' to print out
this full path location: '$$unchecked' along with the expected and
calculated checksums.
[1] Euphemism for me spending lots of time debugging and being confused.
|
|
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this
very alien to anyone that is not familiar with the history of the Hubble
Space Telescope (the camera is no longer used! Its just used here since its
one of the standard FITS files from the FITS standard webpage).
With this commit the variable names have been modified to be more readable
and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf'
(describing the purpose of each variable) were edited and made more clear.
|
|
Summary of possible semantic conflicts
1. The recipe to download input datasets has been modified. You have to
re-set the old 'origname' variable to 'localname' (to avoid confusion)
and the default dataset URL should now be complete (including the
actual filename). See the newly added descriptions in 'INPUTS.conf' for
more on this.
Until now, when the dataset was already present on the host system, a link
couldn't be made to it, causing the project to crash in the checksum
phase. This has been fixed with properly naming the main variable as
'localname' to avoid the confusion that caused it.
Some other problems have been fixed in this recipe in the meantime:
- When the checksum is different, the expected and calculated checksums
are printed.
- In the default paper, we now print the full URL of the dataset, not just
the server, so the checksum of the 'download.tex' step has been updated.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until now, throughout Maneage we were using the old name of "Reproducible
Paper Template". But we have finally decided to use Maneage, so to avoid
confusion, the name has been corrected in `README-hacking.md' and also in
the copyright notices.
Note also that in `README-hacking.md', the main Maneage branch is now
called `maneage', and the main Git remote has been changed to
`https://gitlab.com/maneage/project' (this is a new GitLab Group that I
have setup for all Maneage-related projects). In this repository there is
only one `maneage' branch to avoid complications with the `master' branch
of the projects using Maneage later.
|
|
Until now, the configuration Makefiles (in
`reproduce/software/config/installation' and `reproduce/analysis/config')
had a `.mk' suffix, similar to the workhorse Makefiles. Although they are
indeed Makefiles, but given their nature (to only keep configuration
parameters), it is confusing (especially to early users) for them to also
have a `.mk' (similar to the analysis or software building Makefiles).
To address this issue, with this commit, all the configuration Makefiles
(in those directories) are now given a `.conf' suffix. This is also assumed
for all the files that are loaded.
The configuration (software building) and running of the template have been
checked with this change from scratch, but please report any error that may
not have been noticed.
THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS
FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE
SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES
ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
|
|
Now that its 2020, its necessary to include this year in the copyright
statements.
|
|
Until now, when an input dataset already exists in `INDIR', the template
would just make a symbolic link to it in the build directory. However, in
many cases, the files in INDIR will actually be links to other locations on
the filesystem and some programs have problems following too many links.
With this commit, the template is now using the `readlink' program (part of
GNU Coreutils) to follow a possible link and point the link in the build
directory directly to an actual non-link file.
|
|
Until now, the software building and analysis steps of the pipeline were
intertwined. However, these steps (of how to build a software, and how to
use it) are logically completely independent.
Therefore with this commit, the pipeline now has a new architecture
(particularly in the `reproduce' directory) to emphasize this distinction:
The `reproduce' directory now has the two `software' and `analysis'
subdirectories and the respective parts of the previous architecture have
been broken up between these two based on their function. There is also no
more `src' directory. The `config' directory for software and analysis is
now mixed with the language-specific directories.
Also, some of the software versions were also updated after some checks
with their webpages.
This new architecture will allow much more focused work on each part of the
pipeline (to install the software and to run them for an analysis).
|
