| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Until now, the core Maneage branch included some configuration files for
Gnuastro's programs. This was actually a remnant of the distant past when
Maneage didn't actually build its own software and we had to rely on the
host's software versions. This file contained the configuration files
specific to Gnuastro for this project and also had a feature to avoid
checking the host's own configuration files.
However, we now build all our software ourselves with fixed configuration
files (for the version that is being installed and its version is
stored). So those extra configuration files were just extra and caused
confusion and problems in some scenarios. With this commit, those extra
files are now removed.
Also, two small issues are also addressed in parallel with this commit:
- When running './project make clean', the 'hardware-parameters.tex' macro
file (which is created by './project configure' is not deleted.
- The project title is now written into the default output's PDF's
properties (through 'hypersetup' in 'tex/src/preamble-header.tex')
through the LaTeX macro.
All these issues were found and fixed with the help of Samane Raji.
|
|
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this
very alien to anyone that is not familiar with the history of the Hubble
Space Telescope (the camera is no longer used! Its just used here since its
one of the standard FITS files from the FITS standard webpage).
With this commit the variable names have been modified to be more readable
and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf'
(describing the purpose of each variable) were edited and made more clear.
|
|
Summary of possible semantic conflicts
1. The recipe to download input datasets has been modified. You have to
re-set the old 'origname' variable to 'localname' (to avoid confusion)
and the default dataset URL should now be complete (including the
actual filename). See the newly added descriptions in 'INPUTS.conf' for
more on this.
Until now, when the dataset was already present on the host system, a link
couldn't be made to it, causing the project to crash in the checksum
phase. This has been fixed with properly naming the main variable as
'localname' to avoid the confusion that caused it.
Some other problems have been fixed in this recipe in the meantime:
- When the checksum is different, the expected and calculated checksums
are printed.
- In the default paper, we now print the full URL of the dataset, not just
the server, so the checksum of the 'download.tex' step has been updated.
|
|
Possible semantic conflicts (that may not show up as Git conflicts but may
cause a crash in your project after the merge):
1) The project title (and other basic metadata) should be set in
'reproduce/analysis/conf/metadata.conf'. Please include this file in
your merge (if it is ignored because of '.gitattributes'!).
2) Consider importing the changes in 'initialize.mk' and 'verify.mk' (if
you have added all analysis Makefiles to the '.gitattributes' file
(thus not merging any change in them with your branch). For example
with this command:
git diff master...maneage -- reproduce/analysis/make/initialize.mk
3) The old 'verify-txt-no-comments-leading-space' function has been
replaced by 'verify-txt-no-comments-no-space'. The new function will
also remove all white-space characters between the columns (not just
white space characters at the start of the line). Thus the resulting
check won't involve spacing between columns.
A common set of steps are always necessary to prepare a project for
publication. Until now, we would simply look at previous submissions and
try to follow them, but that was prone to errors and could cause
confusion. The internal infrastructure also didn't have some useful
features to make good publication possible. Now that the submission of a
paper fully devoted to the founding criteria of Maneage is complete
(arXiv:2006.03018), it was time to formalize the necessary steps for easier
submission of a project using Maneage and implement some low-level features
that can make things easier.
With this commit a first draft of the publication checklist has been added
to 'README-hacking.md', it was tested in the submission of arXiv:2006.03018
and zenodo.3872248. To help guide users on implementing the good practices
for output datasets, the outputs of the default project shown in the paper
now use the new features). After reading the checklist, please inspect
these.
Some other relevant changes in this commit:
- The publication involves a copy of the necessary software
tarballs. Hence a new target ('dist-software') was also added to
package all the project's software tarballs in one tarball for easy
distribution.
- A new 'dist-lzip' target has been defined for those who want to
distribute an Lzip-compressed tarball.
- The '\includetikz' LaTeX macro now has a second argument to allow
configuring the '\includegraphics' call when the plot should not be
built, but just imported.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until now, the comment in the file said that setting the `verify-outputs`
variable to `yes` disables the verification. Looking at
`reproduce/analysis/make/verify.mk` shows that the opposite is true.
With this commit, the word `disable` is replaced with `enable` so that the
user is not confused by the conflict between the source code in the other
file and this comment.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
|
Until now, the configuration Makefiles (in
`reproduce/software/config/installation' and `reproduce/analysis/config')
had a `.mk' suffix, similar to the workhorse Makefiles. Although they are
indeed Makefiles, but given their nature (to only keep configuration
parameters), it is confusing (especially to early users) for them to also
have a `.mk' (similar to the analysis or software building Makefiles).
To address this issue, with this commit, all the configuration Makefiles
(in those directories) are now given a `.conf' suffix. This is also assumed
for all the files that are loaded.
The configuration (software building) and running of the template have been
checked with this change from scratch, but please report any error that may
not have been noticed.
THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS
FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE
SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES
ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
|
|
Until now, the only verification that the template provided was the
published PDF. Users had to manually compare the published and generated
PDFs (numbers, plots, tables) and see if they obtained the same
result. However, this type of manual verification is not good and is prone
to frustration and missing important differences.
With this commit, a new Makefile has been added in the analysis steps:
`verify.mk'. It provides facilities to easily verify the results that go
into the paper. For example tables that go into making the paper's plots,
or the LaTeX macros that blend into the text. See the updated parts in
`README-hacking.md` for a more complete explanation.
This completes task #15497.
|
|
Now that its 2020, its necessary to include this year in the copyright
statements.
|
|
While reviewing Prasenjit's commits, I noticed that we had forgot to add
the citation for TIDES, also to make things clear, the program/library
build rules are now sorted alphabetically.
Finally, I noticed that after building the TiKZ PDF figures, it is crashing
(like on Prasenjit's computer). After looking around, I noticed its because
we were setting the of the `TEXINPUTS' environment variable to be the
installed TeX Live directory (which was ultimately redundant because by
default TeX will look into where it was installed). The important thing is
just that we remove any possible value the host system has, not to set new
directories.
|
|
TIDES is an ODE integrator with multiple-precision arithmetic.
|
|
Until now, the software building and analysis steps of the pipeline were
intertwined. However, these steps (of how to build a software, and how to
use it) are logically completely independent.
Therefore with this commit, the pipeline now has a new architecture
(particularly in the `reproduce' directory) to emphasize this distinction:
The `reproduce' directory now has the two `software' and `analysis'
subdirectories and the respective parts of the previous architecture have
been broken up between these two based on their function. There is also no
more `src' directory. The `config' directory for software and analysis is
now mixed with the language-specific directories.
Also, some of the software versions were also updated after some checks
with their webpages.
This new architecture will allow much more focused work on each part of the
pipeline (to install the software and to run them for an analysis).
|
