| Age | Commit message (Collapse) | Author | Lines |
|---|
|
While working on a different branch to build the GNU C Library, I noticed a
few places in the template that need corrections which are now applied:
1. A new-line character after the "C compiler works" notice at the start
of the configure script.
2. Removing possible `::' in the `LD_LIBRARY_PATH' definition of
`basic.mk'. Note that its not necessary in the other steps because we
don't use any outside-defined `LD_LIBRARY_PATH'.
3. Building GMP for C++ and also with `--enable-fat'.
4. Removing the unpacked Perl tarball directory after its installation.
|
|
These two packages are necessary to build the GNU C Library.
|
|
Perl is necessary to build Texinfo and later to build LaTeX. Until now we
were just using the host operating system's installation of Perl, but in
some instances that Perl can be too old and not suppor the features
necessary. With this commit, Perl is now built from source during the basic
installation step of the template.
This was reported by Idafen Santana Pérez, after trying the pipeline on an
Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
|
|
Raul's paper (that uses this template) was just published on arXiv today
(congratulations Raul!). So it has been added to the list of papers using
this template.
|
|
Since we got the RDA Adoption grant, it was necessary to add it in the
acknowledgements.
|
|
When building the log4cxx tarball from its Git history, I noticed that
files with very long names are not packaged by tar (because by default
Automake uses the ancient v7 tar format that only supports file names less
than 99 characters).
So I build the tarball with the `tar-ustar' option to Automake (by
modifying the log4cxx source) and the resulting tarball was able to compile
and run successfully. This has been described above the rule to build
log4cxx and I also sent an email to their developing mailing list to inform
them of this problem. If they address it, I will remove the note on the
necessary corrections.
|
|
Some minor corrections were made in the template:
- When making the distribution, `.swp' files (created by Vim) are also
removed.
- Autoconf is set as a prerequisite of Automake
I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball
needs some patches, so I have just left it half done until someone actually
needs it and we apply the patch.
|
|
Since adding this new step, I had forgot to mention it in the checklist of
`README-hacking.md'. It is added with this commit.
|
|
Until now, the tarballs were the first normal prerequisite of the
software. As a result if their date changed, the whole software would be
re-built. However, for tarballs specifically, we actually check their
contents with a checksum, so their date is irrelevant (if its newer than
the built program, but has the same checksum, there is no need to re-build
the software).
Also, calling the tarball name as an argument to the building process (for
example `gbuild') was redundant. It is now automatically found from the
list of order-only prerequisites within `gbuild' and `cbuild' (similar to
how it was previously found in the `pybuild' for Python building).
A `README.md' file has also been placed in `reproduce/software/make' to
help describe the shared properties of the software building
Makefiles. This will hopefully grow much larger in the future.
|
|
Python's `lmfit' module and all its major dependencies (`asteval',
`corner', `emcee' and `uncertainties') have been included in the template.
While doing this I noticed that if the tarballs are the last prerequisite
of each software building rule, then when building in parallel, the
template will immediately start building packages as soon as the first one
is downloaded. Not like the current way that it will attempt to download
several, then start building. For now, this has been implemented in the
Python build rules for all the modules and we'll later do the same for the
other programs and libraries. This also motivated a simplification of the
`pybuild' function: it now internally looks into the prerequisites and
selects the tarball from the prerequisite that is in the tarballs
directory.
This isn't a problem for the build, but I just don't understand why Python
can't recognize the version of `emcee', Python reads the version of `emcee'
as `0.0.0'! But it doesn't cause any crash in the build, so for now its
fine.
|
|
The part on using shared memory was edited for a few things that weren't
clear.
|
|
Some typos were fixed.
|
|
The edits help it be more clear, and remind the reader to delete any
remaining file in the RAM in the end.
|
|
When you are working with large files and there is some good RAM in the
system (large/powerful computers), it is beneficial to work in the shared
memory directory and not the actual persistent storage (like HDD or
SSD).
With this commit, a fully working demo has been added to
`README-hacking.md' (under the tips of "Make programming") to show how to
effectively work in situations like this.
|
|
The tarball of HEALPix includes multiple languages and doesn't include the
ready-to-run GNU Build System by default, we actually have to build the
`./configure' script for the C/C++ libraries. So it was necessary to also
include GNU Autoconf and GNU Automake as prerequisites of HEALPix.
However, the official GNU Autoconf tarball (dating from 2012) doesn't build
on modern systems, so I just cloned it from its source and bootstrapped it
and built its modern tarball which we are using here.
|
|
The following software are added with this commit: eigency, esutil, flake8,
future, galsim, lsstdesccoord, pybind11 and pyflakes.
|
|
As part of an effort to bring in all the dependencies of the LSST Science
pipeline (which includes the last commit), these software are now available
in the template.
|
|
With this commit these three software packages are now installable with
this template.
|
|
The steps to package the project have been made slightly more clear and
also the temporary directory that is created for packaging is deleted after
the tarball is made.
|
|
Until now, when you ran `make clean', all the directories under
`$(BDIR)/tex/' would be deleted except for `macros' and `build'. This was
good for the single-user mode. But in group mode, this would delete the
user-specific TeX build directory because its called `build-USER', not
`build'.
With this commit, to fix the problem, we define the new `texbtopdir' and
based on the group condition, and use that to specify which directory to
not delete.
|
|
Carlos Morales Socorro reported that his LaTeX build was missing the
`trimspaces' package, so it is now included in the pipeline.
|
|
Until now, some software were using the depreciated ADS URL
(`http://adsabs.harvard.edu....') and some were using the modern one
(`http://ui.adsabs.harvard.edu').
With this commit, to be consistent they all link to the modern URL.
|
|
Until now, this script would always only work with a file-lock. But in some
scenarios, we might want to download in parallel. For example when the
system has multiple ports to the internet.
With this commit, we have added this feature: when the lockfile name is
`nolock', it won't lock and will download in parallel.
|
|
Since ImageMagick can take long to build, we are now building it in
parallel. Also, the part where we replace an `_' with `\_' in the software
version at the end of the configure script was removed. It is more
clear/readable that the actual rule that includes such a name deals with
the underline (as is the case for `sip_tpv' which already dealt with it).
Finally, I noticed that the checks at the start of `top-prepare' were
missing new-lines. I had forgot that the Make single-shell variable isn't
activated in this stage yet.
|
|
A special directory is now defined in `initialize.mk' that can be used in
both the preparation and build phases. Also, the contents of prepared
results can now be conditionally read during `./project make'.
|
|
In many real-world scenarios, `./project make' can really benefit from
having some basic information about the data before being run. For example
when quering a server. If we know how many datasets were downloaded and
their general properties, it can greatly optmize the process when we are
designing the solution to be run in `./project make'.
Therefore with this commit, a new phase has been added to the template's
design: `./project prepare'. In the raw template this is empty, because the
simple analysis done in the template doesn't warrant it. But everything is
ready for projects using the template to add preparation phases prior to
the analysis.
|
|
It was some time since these three software were not updated! With this
commit the template now uses the most recent stable release of these
packages.
Also, the hosting server for ImageMagick was moved to my own webpage
because unfortunately ImageMagick removes its tarballs from its own
version.
|
|
Until now, when the project's source was downloaded from something like
arXiv, in `README.md', we were instructing them to set the executable flags
of all the files that need it. But except for `./project', the reader
shouldn't have to worry about the project internals! Once its executable,
`./project' can easily fix the executable flags of all the files that need
it automatically.
With this commit, in `README.md', we just instruct the reader to set the
executable flag of `./project' and any other file that needs an executable
flag is given one at the start of the set of commands for `./project
configure'. In customized projects, if an author needs executable flags on
any other files, they can easily add it there without involving the user.
|
|
Until now we were calling it `Sextractor', but the official way of writing
it is `SExtractor'. With this commit, this has been corrected.
|
|
Konrad Hinsen pointed out that this part was missing from the instructions
in `README.md' after cloning. So it is added.
|
|
The two modifications to the LaTeX source of an arXiv-downloaded source
weren't rendered properly on Gitlab, so they are corrected to be in the
same line and not have a separate code-block.
|
|
Until now, we were assuming that the users would just clone the project in
Git. But after submitting arXiv:1909.11230, and trying to build directly
from the arXiv source, I noticed several problems that wouldn't allow users
to build it automatically. So I tried the build step by step and was able
to find a fix for the several issues that came up.
The scripting parts of the fix were primarily related to the fact that the
unpacked arXiv tarball isn't under version control, so some checks had to
be put there. Also, we wanted to make it easy to remove the extra files, so
an extra `--clean-texdit' option was added to `./project'.
Finally, some manual corrections were necessary (prior to running
`./project', which are now described in `README.md'. Most of the later
steps can be automated and we should do it later, I just don't have enough
time now.
|
|
The description of arXiv:1909.11230 was slightly modified to be in the same
format as the other papers.
|
|
This paper was published on arXiv today and is a good example for people to
see the application of this system in practice.
|
|
Until now, the pipeline was instructed to only ignore the current temporary
project distribution directory. So if there were directories from previous
builds, they were wrongly included in the current tarball.
With this commit, we don't just ignore the directory of the current
distribution, but generally, all directories starting with `paper-v*'.
|
|
Until now customizing it was a little more detailed, for example the
copyright statement wasn't generic and was about "this template". So the
user would have to correct it.
With this commit, the copyright statment just says "this project", so it
can apply to the raw template and also any customization of it. Also, some
minor edits were made in the various parts of the text to make it more
clear.
|
|
Users that are not familiar with the file structure of the project may
specify the current directory (to-level source directory) as their
build-directory. This will cause a crash right after answering the
questions, where `rm' will complain about `tex/build' not being deleted
because it exists as a directory.
To avoid such confusing situtations, the configure script now checks if the
build directory is actually a sub-directory of the source. If it is, it
will complain with a short message and abort. Also, a `CAUTION' statment
has been put in the initial description, right ontop of the question.
This bug was reported Carlos Allende Prieto and David Valls-Gabaud.
|
|
Until now, when the commit was tagged, `git describe' would just print the
tag and no longer the commit checksum. This is bad because the checksum is
a much more robust way to confirm the point in history.
With this commit the `--long' option has been added to `git describe' to
fix this issue. From now on, when we are on a tag, it will print the tag
followed by a `-0-' and the first characters of the checksum.
|
|
`./project make dist' will package all the LaTeX-specific files (and
analysis source files) into one `tar.gz' file that is ready to upload to
servers like arXiv. However, it wasn't updated for some time, so running it
would complain about not having a `configure' script in the top of the
project.
With this commit, it now works with the new file-structure of the project
and also copies all the BibLaTeX source files and `paper.bbl' into the top
tarball directory, which allows arXiv to build the paper as intended.
The output of `./project make dist' has been uploaded and tested on arXiv
and it is built by arXiv perfectly.
Also, a short description of all the special `make' targets was added to
the output of `./project --help'.
|
|
After a re-read on Gitlab, it has been slightly edited to be more clear.
|
|
When you want to publish your project, it is very convenient to have a
single file that contains the whole history. So a tip is added to
`README-hacking.md' that describes how to do this with `git bundle'.
|
|
Until now, we weren't explicitly asking for BibLaTeX to build the citations
with only initial of the author's given names. Therefore when one BibTeX
entry had a full given name and another had only initials, this would also
be reflected in the paper's bibliography.
With this commit, the `giveninits=true' option is given to BibLaTeX to
always only print the initial character of an author's given name.
|
|
Until now the SExtractor BibTeX entry has the first-name and family name in
the same field, while the family-name should be in curly braces. Also, it
was missing an ADS URL. So the default ADS generated BibTeX entry for
SExtractor is now used instead of the old one.
|
|
In some cases, users of the template may not need the other template
headers, they may only want `preamble-biblatex.tex'. But `xcolor' needs to
be loaded before being able to load the various colors we use in the
references. So to be self-consistent, it is loaded.
Also, the default style was also printing the month of the publication
which is not common. So a line was added to clear the `month' field before
building the Bibliography.
|
|
New versions of astropy, bash, cmake, curl, findutils, gawk, gcc,
ghostscript, git, make, gsl had recently come so they are updated with this
commit.
About GNU Findutils and GNU Make: I was bootstrapping (building the tarball
of) these two separately separately because their standard tarball release
had problems on some systems. Both have been updated now so I am no longer
using my own webpage as their main URL.
A special note about GNU Make. I just noticed that during bootstrapping,
GNU Make would use the fixed version string of `4.2.90' for any commit!!!
But fortunately they have officially released their 4.2.90 version, so we
are safely using their own webpage. The only difference is the compression
format. My old bootstrapped build was `tar.lz', but the standard release is
`tar.gz'.
Also, all the basic programs (installed in `.local/bin') in `basic.mk' are
now existance-only dependencies (after a `|'). Because later programs just
use them at a very basic level, so there is no need to rebuild everything
when Bash gets updated for example.
|
|
The Copyright year is now on a separate line (by adding a backslash), and
the `file-metadata' is now enclosed in two "`" characters to show
differently after rendering.
|
|
Until now, OpenMPI would complain about not having `ssh' or `rsh' as a
remote shell feature. However, such features should not be necessary in a
reproducible scenario and they also have major security issues.
With this commit, we are now using OpenMPI's `OMPI_MCA_plm_rsh_agent'
environment variable to disable any remote shell dependency for it (as
suggested by Boud). Therefore, any dependency for OpenSSH has been
removed. But I thought to keep the build instructions incase it may be
useful under some un-foreseen scenario. However, to discourage people from
building it, a notice was added ontop of the build instructions.
This bug was found, tested and solved thanks to Roberto Baena Gallé and
Boud Roukema.
This fixes bug #56724.
|
|
Until now we have followed the convention of using space characters before
comment lines in recepies, not tabs. This has been corrected in one case.
|
|
Until this commit, `fpack' and `funpack' were not installed by default
with the installation of CFITSIO. It is necessary to explicity do a
`make fpack' and `make funpack' to have them installed. With this
commit, these two programs have been added.
|
|
Until this commit, the name of the variable for `beautifulsoup4'
checksum was wrong, and because of that, it was not able to install it.
With this commit, `beautifulsoup-checksum' has been replaced for
`beautifulsoup4-checksum' in the `reproduce/software/make/python.mk'
Makefile, and the problem has been fixed. This was not noticed
previously because this Python package is only installed when some high
level programs are requested to be installed.
With this commit the version of `imagemagick' program has been also
updated because the previous version is not available in the official
website anymore.
|
