aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2020-01-13Updated verion of Astropy to 4.0 the most recent oneRaul Infante-Sainz-3/+3
Newer versions of Astropy package has been released. With this commit, it has been updated. It has been increased from v3.2.1 to v4.0
2020-01-11Corrected markdown code notations in one README.mdMohammad Akhlaghi-4/+4
In markdown, to specify that part of the text should be shown as code we need to put it between two `. But in `reproduce/software/make/README.md', the code parts started with ` and finished in ' (like the file name above). With this commit, this has been corrected and it will display properly on web browsers.
2020-01-01Verification function checks if file existsMohammad Akhlaghi-8/+20
Until now, if the file to be verified didn't exist, a different checksum would be generated, and it would stop, but it wasn't immediately clear if the differing checksum is because the file doesn't exist at all! With this commit, before calculating the checksum, we first make sure if the file exists. If it doesn't exist an explicit error is printed and thus will help the project editor to find the cause of the problem.
2020-01-01Minor corrections in `README-hacking.md' after verificationMohammad Akhlaghi-4/+7
In the previous commit, I had forgot to update a small part in the checklist (when modifying `top-make.mk') which is now corrected. I also added a few sentences in the description of how to customize the verification to make it easier to understand.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-32/+198
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01README-hacking.md checklist now also ignores changes in paper.texMohammad Akhlaghi-7/+12
In the previous commit, we added the files to ignore from the template branch, but only the files that had been deleted. With this commit, `paper.tex' is also added to the files that must be ignored from the template branch (the file remains in the project, but in the template branch, its contents are just dummy place-holders).
2020-01-01Added step README-hacking's checklist to avoid merging dummy filesMohammad Akhlaghi-0/+15
During the checklist we guide the user to delete the dummy `delete-me*' files from their custom branch. Later, if the dummy files are updated in the template's master branch, if the user merges with the template branch, these files will be written back into their project! This is very annoying! With this commit, a step was added in the `README-hacking.md' checklist, just after deleting the dummy files to avoid this problem using the `.gitattributes' file, telling Git to keep the changes as implemented in the merging branch (`ours').
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-70/+70
Now that its 2020, its necessary to include this year in the copyright statements.
2019-12-18Fixing Libxml2 checksum variable nameRaul Infante-Sainz-1/+1
Until this commit, the number `2' was missing in the checksum variable name of that library. It was `libxml-checksum' but it should be `libxml2-checksum'. With this commit, this issue has been fixed.
2019-12-18Removed extra backslash in Jeepney prerequisitesRaul Infante-Sainz-1/+1
An extra backslash in the prerequisites of Jeepney Python package was causing a crash in the installation of that software. With this commit, this problem has been fixed by removing the backslash.
2019-12-14R explicitly built without support for OpenMPMohammad Akhlaghi-1/+2
OpenMP takes a LONG TIME to build, so to keep things reproducible we are explicitly disabling OpenMP, if a user needs OpenMP, its trivial to just add it as a prerequisite of R. The problem is that in some scenarios (based on other dependencies and when they were built in the build directory), OpenMP may be present when R is being installed and in other it may not. We don't want the result to be different between the two builds.
2019-12-14Core R package is now in templateMohammad Akhlaghi-0/+16
With this commit, we now have the core R interpretter within the template. We should later include instructions to install R packages (possibly in a separate top-level Makefile like Python).
2019-12-13Necessary TeXLive packages installed: pdfescape letltxmacro bitsetMohammad Akhlaghi-1/+1
Recent builds of the template need these three packages to build the PDF. This was reported by Hamed Altafi.
2019-12-04Added pdftexmcds to the TeXlive packages to installMohammad Akhlaghi-1/+1
Until now we weren't including this package, but Alberto Madrigal recently reported that his build of the template failed because it needed it. With this commit, it is now being installed with the template.
2019-12-04Perl built without -shared on macOSMohammad Akhlaghi-1/+11
Until now, while building Perl, the `-Dlddlflags="-shared $$LDFLAGS"' option was being used for all systems. However, this caused `symbol(s) not found for architecture x86_64' problems on macOS systems. With this commit, this configure option is only passed for GNU/Linux systems. With it, Perl can be built nicely on both GNU/Linux and macOS.
2019-12-04Updated verions of Ghostscript and GnuastroMohammad Akhlaghi-4/+4
Newer versions of these packages have recently come out with major improvements, so they have been updated in the template.
2019-12-04Checking for necessary X11 libraries before building GhostscriptMohammad Akhlaghi-1/+35
Until now, Ghostscript was using some host system's X11 libraries during its build (and later at run-time). We should ideally install all these necessary libraries within the template (Task #15481). But right now we are too busy. As a temporary work-around we try building a small dummy program that links with some of those libraries before attempting to built Ghostscript. If it fails, then a notice is printed with the cause and explaining a temporary solution is suggested: how to install those libraries on the system when you have root access.
2019-11-29Download links directly to actual file if it exists in INDIRMohammad Akhlaghi-2/+8
Until now, when an input dataset already exists in `INDIR', the template would just make a symbolic link to it in the build directory. However, in many cases, the files in INDIR will actually be links to other locations on the filesystem and some programs have problems following too many links. With this commit, the template is now using the `readlink' program (part of GNU Coreutils) to follow a possible link and point the link in the build directory directly to an actual non-link file.
2019-11-24Project's Makefiles run with no builtin rules or variablesMohammad Akhlaghi-1/+2
Until now, after removing all environment variables, we were just giving Make the top Makefile to execute. By default, for every target, Make will try many built-in rules (which is good when compiling programs, but redundant in other cases). All these checkings also populate the debugging output of Make (with `-d'). So its easier and slightly faster to just tell Make to ignore builtin rules and variables. With this commit, to address this issue, the `project' script runs `.local/bin/make' with `--no-builtin-rules' and `--no-builtin-variables'.
2019-11-08Matplotlib problem on macOS system with GNU GCC fixedMohammad Akhlaghi-3/+9
Until now when building Matplotlib on macOS systems, we were using the default C compiler. However, while Yahya Sefidbakht (previously) and Mahdieh Nabavi (now) were trying to build the template, on their macOS using the GNU Compiler Collection (GCC), we found that Matplotlib needs special macOS headers that GCC doesn't recognize. With this commit, when Matplotlib is being built on macOS systems, it uses `clang' and this fixed the problem (so far checked on Mahdieh's machine).
2019-11-08Minor corrections applied in software buildsMohammad Akhlaghi-8/+13
While working on a different branch to build the GNU C Library, I noticed a few places in the template that need corrections which are now applied: 1. A new-line character after the "C compiler works" notice at the start of the configure script. 2. Removing possible `::' in the `LD_LIBRARY_PATH' definition of `basic.mk'. Note that its not necessary in the other steps because we don't use any outside-defined `LD_LIBRARY_PATH'. 3. Building GMP for C++ and also with `--enable-fat'. 4. Removing the unpacked Perl tarball directory after its installation.
2019-11-06GNU Project Debugger (GDB) and Pexpect can now be builtMohammad Akhlaghi-0/+18
These two packages are necessary to build the GNU C Library.
2019-11-06Perl is now built as a basic dependency of the templateMohammad Akhlaghi-5/+52
Perl is necessary to build Texinfo and later to build LaTeX. Until now we were just using the host operating system's installation of Perl, but in some instances that Perl can be too old and not suppor the features necessary. With this commit, Perl is now built from source during the basic installation step of the template. This was reported by Idafen Santana PĂ©rez, after trying the pipeline on an Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
2019-11-06Added 1911.01430 as most recent paper using this templateMohammad Akhlaghi-0/+7
Raul's paper (that uses this template) was just published on arXiv today (congratulations Raul!). So it has been added to the list of papers using this template.
2019-11-04Acknowledged support from the RDA EU 4.0 grantMohammad Akhlaghi-1/+4
Since we got the RDA Adoption grant, it was necessary to add it in the acknowledgements.
2019-11-03Corrected build of log4cxx by re-building the tarball usedMohammad Akhlaghi-15/+31
When building the log4cxx tarball from its Git history, I noticed that files with very long names are not packaged by tar (because by default Automake uses the ancient v7 tar format that only supports file names less than 99 characters). So I build the tarball with the `tar-ustar' option to Automake (by modifying the log4cxx source) and the resulting tarball was able to compile and run successfully. This has been described above the rule to build log4cxx and I also sent an email to their developing mailing list to inform them of this problem. If they address it, I will remove the note on the necessary corrections.
2019-10-31Minor corrections in distribution and autoconf prerequisite of automakeMohammad Akhlaghi-6/+37
Some minor corrections were made in the template: - When making the distribution, `.swp' files (created by Vim) are also removed. - Autoconf is set as a prerequisite of Automake I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball needs some patches, so I have just left it half done until someone actually needs it and we apply the patch.
2019-10-30Added ./project prepare in the checklist of README-hacking.mdMohammad Akhlaghi-2/+3
Since adding this new step, I had forgot to mention it in the checklist of `README-hacking.md'. It is added with this commit.
2019-10-30Tarballs set as order-only prerequisites, not needed for build callsMohammad Akhlaghi-371/+427
Until now, the tarballs were the first normal prerequisite of the software. As a result if their date changed, the whole software would be re-built. However, for tarballs specifically, we actually check their contents with a checksum, so their date is irrelevant (if its newer than the built program, but has the same checksum, there is no need to re-build the software). Also, calling the tarball name as an argument to the building process (for example `gbuild') was redundant. It is now automatically found from the list of order-only prerequisites within `gbuild' and `cbuild' (similar to how it was previously found in the `pybuild' for Python building). A `README.md' file has also been placed in `reproduce/software/make' to help describe the shared properties of the software building Makefiles. This will hopefully grow much larger in the future.
2019-10-29lmfit and its dependencies added, Python tarballs as prerequisiteMohammad Akhlaghi-189/+260
Python's `lmfit' module and all its major dependencies (`asteval', `corner', `emcee' and `uncertainties') have been included in the template. While doing this I noticed that if the tarballs are the last prerequisite of each software building rule, then when building in parallel, the template will immediately start building packages as soon as the first one is downloaded. Not like the current way that it will attempt to download several, then start building. For now, this has been implemented in the Python build rules for all the modules and we'll later do the same for the other programs and libraries. This also motivated a simplification of the `pybuild' function: it now internally looks into the prerequisites and selects the tarball from the prerequisite that is in the tarballs directory. This isn't a problem for the build, but I just don't understand why Python can't recognize the version of `emcee', Python reads the version of `emcee' as `0.0.0'! But it doesn't cause any crash in the build, so for now its fine.
2019-10-29Minor edits to README-hacking.mdMohammad Akhlaghi-28/+31
The part on using shared memory was edited for a few things that weren't clear.
2019-10-29Further small edit in using shared memory of README-hacking.mdMohammad Akhlaghi-3/+2
Some typos were fixed.
2019-10-29Minor edits to suggestion on using shared memoryMohammad Akhlaghi-3/+9
The edits help it be more clear, and remind the reader to delete any remaining file in the RAM in the end.
2019-10-29Suggestion on good usage of /dev/shm in README-hacking.mdMohammad Akhlaghi-6/+57
When you are working with large files and there is some good RAM in the system (large/powerful computers), it is beneficial to work in the shared memory directory and not the actual persistent storage (like HDD or SSD). With this commit, a fully working demo has been added to `README-hacking.md' (under the tips of "Make programming") to show how to effectively work in situations like this.
2019-10-28HEALPix, Autoconf and Automake now in libraryMohammad Akhlaghi-1/+99
The tarball of HEALPix includes multiple languages and doesn't include the ready-to-run GNU Build System by default, we actually have to build the `./configure' script for the C/C++ libraries. So it was necessary to also include GNU Autoconf and GNU Automake as prerequisites of HEALPix. However, the official GNU Autoconf tarball (dating from 2012) doesn't build on modern systems, so I just cloned it from its source and bootstrapped it and built its modern tarball which we are using here.
2019-10-24Several more LSST pipeline dependencies are addedMohammad Akhlaghi-13/+144
The following software are added with this commit: eigency, esutil, flake8, future, galsim, lsstdesccoord, pybind11 and pyflakes.
2019-10-24APR, APR Utility, Boost and Eigen are now availableMohammad Akhlaghi-2/+70
As part of an effort to bring in all the dependencies of the LSST Science pipeline (which includes the last commit), these software are now available in the template.
2019-10-24GNU Bison, GNU Help2man and Flex are now availableMohammad Akhlaghi-3/+26
With this commit these three software packages are now installable with this template.
2019-10-19Minor improvments in packaging of project with make distMohammad Akhlaghi-12/+14
The steps to package the project have been made slightly more clear and also the temporary directory that is created for packaging is deleted after the tarball is made.
2019-10-11Properly working make clean when in group modeMohammad Akhlaghi-3/+4
Until now, when you ran `make clean', all the directories under `$(BDIR)/tex/' would be deleted except for `macros' and `build'. This was good for the single-user mode. But in group mode, this would delete the user-specific TeX build directory because its called `build-USER', not `build'. With this commit, to fix the problem, we define the new `texbtopdir' and based on the group condition, and use that to specify which directory to not delete.
2019-10-10Including trimspaces from TeXLiveMohammad Akhlaghi-1/+2
Carlos Morales Socorro reported that his LaTeX build was missing the `trimspaces' package, so it is now included in the pipeline.
2019-10-07Software citations now use modern ADS link for adsurlMohammad Akhlaghi-9/+9
Until now, some software were using the depreciated ADS URL (`http://adsabs.harvard.edu....') and some were using the modern one (`http://ui.adsabs.harvard.edu'). With this commit, to be consistent they all link to the modern URL.
2019-10-02Possibile to use download-multi-try script without locksMohammad Akhlaghi-4/+11
Until now, this script would always only work with a file-lock. But in some scenarios, we might want to download in parallel. For example when the system has multiple ports to the internet. With this commit, we have added this feature: when the lockfile name is `nolock', it won't lock and will download in parallel.
2019-10-01Minor corrections in configure and prepare phaseMohammad Akhlaghi-12/+11
Since ImageMagick can take long to build, we are now building it in parallel. Also, the part where we replace an `_' with `\_' in the software version at the end of the configure script was removed. It is more clear/readable that the actual rule that includes such a name deals with the underline (as is the case for `sip_tpv' which already dealt with it). Finally, I noticed that the checks at the start of `top-prepare' were missing new-lines. I had forgot that the Make single-shell variable isn't activated in this stage yet.
2019-10-01Infrastructure to keep preparation resultsMohammad Akhlaghi-18/+51
A special directory is now defined in `initialize.mk' that can be used in both the preparation and build phases. Also, the contents of prepared results can now be conditionally read during `./project make'.
2019-10-01Preparation phase added before final buildingMohammad Akhlaghi-74/+297
In many real-world scenarios, `./project make' can really benefit from having some basic information about the data before being run. For example when quering a server. If we know how many datasets were downloaded and their general properties, it can greatly optmize the process when we are designing the solution to be run in `./project make'. Therefore with this commit, a new phase has been added to the template's design: `./project prepare'. In the raw template this is empty, because the simple analysis done in the template doesn't warrant it. But everything is ready for projects using the template to add preparation phases prior to the analysis.
2019-10-01New versions for ImageMagick, Python, Numpy Scipy and MatplotlibMohammad Akhlaghi-19/+19
It was some time since these three software were not updated! With this commit the template now uses the most recent stable release of these packages. Also, the hosting server for ImageMagick was moved to my own webpage because unfortunately ImageMagick removes its tarballs from its own version.
2019-09-28Main project script sets executable flags at configure timeMohammad Akhlaghi-3/+23
Until now, when the project's source was downloaded from something like arXiv, in `README.md', we were instructing them to set the executable flags of all the files that need it. But except for `./project', the reader shouldn't have to worry about the project internals! Once its executable, `./project' can easily fix the executable flags of all the files that need it automatically. With this commit, in `README.md', we just instruct the reader to set the executable flag of `./project' and any other file that needs an executable flag is given one at the start of the set of commands for `./project configure'. In customized projects, if an author needs executable flags on any other files, they can easily add it there without involving the user.
2019-09-28Corrected name of SExtractor in its final targetMohammad Akhlaghi-1/+1
Until now we were calling it `Sextractor', but the official way of writing it is `SExtractor'. With this commit, this has been corrected.
2019-09-27Changing to the cloned directory added to README.mdMohammad Akhlaghi-0/+1
Konrad Hinsen pointed out that this part was missing from the instructions in `README.md' after cloning. So it is added.