diff options
| -rw-r--r-- | .file-metadata | bin | 6651 -> 6895 bytes | |||
| -rw-r--r-- | reproduce/software/config/installation/TARGETS.mk | 2 | ||||
| -rw-r--r-- | reproduce/software/make/README.md | 33 | ||||
| -rw-r--r-- | reproduce/software/make/basic.mk | 270 | ||||
| -rw-r--r-- | reproduce/software/make/build-rules.mk | 60 | ||||
| -rw-r--r-- | reproduce/software/make/high-level.mk | 300 | ||||
| -rw-r--r-- | reproduce/software/make/python.mk | 133 |
7 files changed, 427 insertions, 371 deletions
diff --git a/.file-metadata b/.file-metadata Binary files differindex 6a6b52c..f77f0d1 100644 --- a/.file-metadata +++ b/.file-metadata diff --git a/reproduce/software/config/installation/TARGETS.mk b/reproduce/software/config/installation/TARGETS.mk index 395e4bb..b9157f1 100644 --- a/reproduce/software/config/installation/TARGETS.mk +++ b/reproduce/software/config/installation/TARGETS.mk @@ -39,4 +39,4 @@ top-level-programs = gnuastro # Python libraries/modules. -top-level-python = astropy lmfit +top-level-python = astropy diff --git a/reproduce/software/make/README.md b/reproduce/software/make/README.md new file mode 100644 index 0000000..4eaefce --- /dev/null +++ b/reproduce/software/make/README.md @@ -0,0 +1,33 @@ +Software building instructions +============================== + +This directory contains Makefiles that are called by the high-level +`reproduce/software/bash/configure.sh' script. The main target for the +installation of each software is a simple plain text file that contains the +name of the software and its version (which is put in the paper in the +end). Once built, these plain-text files are all put in the proper +sub-directory under `$(BDIR)/software/installed/version-info' (where +`$(BDIR)' is the top-level build-directory specified by the user). + +Besides being directly used in the paper, these simple plain text files +also act as prerequisites for higher-level software that depend on +lower-level ones. + +Note on prerequisites +--------------------- + +Tarballs are order-only prerequsites (after a `|') because we already +check their contents with the checksums, so their date is irrelevant: a +tarball with a different content must have a new/different name, thus it +will not exist, so it will be created, even when its order-only.q + +Binary programs (that don't install any libraries to be linked/used at +compile time can also be order-only prerequisites, because usually they +don't affect the compilation of the programs that depend on them, they +are only used at run-time or by the low-level build instructions of the +software. Ofcourse, if a program's version affects the build of a +higher-level program, then it shouldn't be order-only. + +Libraries or Python modules that are used at compile time must be normal +prerequisites (not order-only), because they are used during the building +of the program.
\ No newline at end of file diff --git a/reproduce/software/make/basic.mk b/reproduce/software/make/basic.mk index 65bdf1e..64c10c0 100644 --- a/reproduce/software/make/basic.mk +++ b/reproduce/software/make/basic.mk @@ -324,8 +324,8 @@ $(ibidir)/low-level-links: | $(ibdir) $(ildir) # The first set of programs to be built are those that we need to unpack # the source code tarballs of each program. First, we'll build the # necessary programs, then we'll build GNU Tar. -$(ibidir)/gzip: $(tdir)/gzip-$(gzip-version).tar.gz - $(call gbuild, $<, gzip-$(gzip-version), static, , V=1) \ +$(ibidir)/gzip: | $(tdir)/gzip-$(gzip-version).tar.gz + $(call gbuild, gzip-$(gzip-version), static, , V=1) \ && echo "GNU Gzip $(gzip-version)" > $@ # GNU Lzip: For a static build, the `-static' flag should be given to @@ -335,15 +335,15 @@ lzipconf="LDFLAGS=-static" else lzipconf= endif -$(ibidir)/lzip: $(tdir)/lzip-$(lzip-version).tar.gz - $(call gbuild, $<, lzip-$(lzip-version), , $(lzipconf)) \ +$(ibidir)/lzip: | $(tdir)/lzip-$(lzip-version).tar.gz + $(call gbuild, lzip-$(lzip-version), , $(lzipconf)) \ && echo "Lzip $(lzip-version)" > $@ -$(ibidir)/xz: $(tdir)/xz-$(xz-version).tar.gz - $(call gbuild, $<, xz-$(xz-version), static) \ +$(ibidir)/xz: | $(tdir)/xz-$(xz-version).tar.gz + $(call gbuild, xz-$(xz-version), static) \ && echo "XZ Utils $(xz-version)" > $@ -$(ibidir)/bzip2: $(tdir)/bzip2-$(bzip2-version).tar.gz +$(ibidir)/bzip2: | $(tdir)/bzip2-$(bzip2-version).tar.gz # Bzip2 doesn't have a `./configure' script, and its Makefile # doesn't build a shared library. So we can't use the `gbuild' # function here and we need to take some extra steps (inspired @@ -365,7 +365,9 @@ $(ibidir)/bzip2: $(tdir)/bzip2-$(bzip2-version).tar.gz makeshared="make -f Makefile-libbz2_so"; \ fi; \ fi; \ - cd $(ddir) && rm -rf $$tdir && tar xf $< && cd $$tdir \ + cd $(ddir) && rm -rf $$tdir \ + && tar xf $(word 1,$(filter $(tdir)/%,$|)) \ + && cd $$tdir \ && sed -e 's@\(ln -s -f \)$$(PREFIX)/bin/@\1@' Makefile \ > Makefile.sed \ && mv Makefile.sed Makefile \ @@ -380,18 +382,18 @@ $(ibidir)/bzip2: $(tdir)/bzip2-$(bzip2-version).tar.gz && ln -fs libbz2.so.1.0 libbz2.so \ && echo "Bzip2 $(bzip2-version)" > $@ -$(ibidir)/unzip: $(tdir)/unzip-$(unzip-version).tar.gz +$(ibidir)/unzip: | $(tdir)/unzip-$(unzip-version).tar.gz v=$$(echo $(unzip-version) | sed -e's/\.//'); \ - $(call gbuild, $<, unzip$$v, static,, \ + $(call gbuild, unzip$$v, static,, \ -f unix/Makefile generic_gcc \ CFLAGS="-DBIG_MEM -DMMAP",,pwd, \ -f unix/Makefile \ BINDIR=$(ibdir) MANDIR=$(idir)/man/man1 ) \ && echo "Unzip $(unzip-version)" > $@ -$(ibidir)/zip: $(tdir)/zip-$(zip-version).tar.gz +$(ibidir)/zip: | $(tdir)/zip-$(zip-version).tar.gz v=$$(echo $(zip-version) | sed -e's/\.//'); \ - $(call gbuild, $<, zip$$v, static,, \ + $(call gbuild, zip$$v, static,, \ -f unix/Makefile generic_gcc \ CFLAGS="-DBIG_MEM -DMMAP",,pwd, \ -f unix/Makefile \ @@ -403,8 +405,8 @@ $(ibidir)/zip: $(tdir)/zip-$(zip-version).tar.gz # # Note for a static-only build: Zlib's `./configure' doesn't use Autoconf's # configure script, it just accepts a direct `--static' option. -$(ibidir)/zlib: $(tdir)/zlib-$(zlib-version).tar.gz - $(call gbuild, $<, zlib-$(zlib-version)) \ +$(ibidir)/zlib: | $(tdir)/zlib-$(zlib-version).tar.gz + $(call gbuild, zlib-$(zlib-version)) \ && echo "Zlib $(zlib-version)" > $@ # GNU Tar: When built statically, tar gives a segmentation fault on @@ -412,19 +414,19 @@ $(ibidir)/zlib: $(tdir)/zlib-$(zlib-version).tar.gz # and unzip aren't dependencies of Tar, but for a clean build, we'll set # Tar to be the last compression-related software (the first-set of # software to be built). -$(ibidir)/tar: $(tdir)/tar-$(tar-version).tar.gz \ - $(ibidir)/bzip2 \ - $(ibidir)/unzip \ +$(ibidir)/tar: $(ibidir)/xz \ + $(ibidir)/zip \ $(ibidir)/gzip \ $(ibidir)/lzip \ $(ibidir)/zlib \ - $(ibidir)/zip \ - $(ibidir)/xz + $(ibidir)/bzip2 \ + $(ibidir)/unzip \ + | $(tdir)/tar-$(tar-version).tar.gz # Since all later programs depend on Tar, the configuration will be # stuck here, only making Tar. So its more efficient to built it on # multiple threads (when the user's Make doesn't pass down the # number of threads). - $(call gbuild, $<, tar-$(tar-version), , , -j$(numthreads) V=1) \ + $(call gbuild, tar-$(tar-version), , , -j$(numthreads) V=1) \ && echo "GNU Tar $(tar-version)" > $@ @@ -447,14 +449,14 @@ $(ibidir)/tar: $(tdir)/tar-$(tar-version).tar.gz \ # function (for tilde expansion). The first can be disabled with # `--disable-load', but unfortunately I don't know any way to fix the # second. So, we'll have to build it dynamically for now. -$(ibidir)/make: $(tdir)/make-$(make-version).tar.gz \ - $(ibidir)/tar +$(ibidir)/make: | $(ibidir)/tar \ + $(tdir)/make-$(make-version).tar.gz # See Tar's comments for the `-j' option. - $(call gbuild, $<, make-$(make-version), , , -j$(numthreads)) \ + $(call gbuild, make-$(make-version), , , -j$(numthreads)) \ && echo "GNU Make $(make-version)" > $@ -$(ibidir)/ncurses: $(tdir)/ncurses-$(ncurses-version).tar.gz \ - | $(ibidir)/make +$(ibidir)/ncurses: | $(ibidir)/make \ + $(tdir)/ncurses-$(ncurses-version).tar.gz # Delete the library that will be installed (so we can make sure # the build process completed afterwards and reset the links). @@ -468,7 +470,7 @@ $(ibidir)/ncurses: $(tdir)/ncurses-$(ncurses-version).tar.gz \ rm -f $(ibdir)/bash* $(ibdir)/awk* $(ibdir)/gawk* # Standard build process. - $(call gbuild, $<, ncurses-$(ncurses-version), static, \ + $(call gbuild, ncurses-$(ncurses-version), static, \ --with-shared --enable-rpath --without-normal \ --without-debug --with-cxx-binding \ --with-cxx-shared --enable-widec --enable-pc-files \ @@ -539,11 +541,11 @@ $(ibidir)/ncurses: $(tdir)/ncurses-$(ncurses-version).tar.gz \ exit 1; \ fi -$(ibidir)/readline: $(tdir)/readline-$(readline-version).tar.gz \ - $(ibidir)/ncurses - $(call gbuild, $<, readline-$(readline-version), static, \ - --with-curses --disable-install-examples, \ - SHLIB_LIBS="-lncursesw" -j$(numthreads)) \ +$(ibidir)/readline: $(ibidir)/ncurses \ + | $(tdir)/readline-$(readline-version).tar.gz + $(call gbuild, readline-$(readline-version), static, \ + --with-curses --disable-install-examples, \ + SHLIB_LIBS="-lncursesw" -j$(numthreads)) \ && echo "GNU Readline $(readline-version)" > $@ # When we have a static C library, PatchELF will be built statically. This @@ -552,12 +554,12 @@ $(ibidir)/readline: $(tdir)/readline-$(readline-version).tar.gz \ # crash, so when PatchELF can't be built statically, we won't build GCC # either, see the `configure.sh' script where we define `good_static_libc' # for more. -$(ibidir)/patchelf: $(tdir)/patchelf-$(patchelf-version).tar.gz \ - | $(ibidir)/make +$(ibidir)/patchelf: | $(ibidir)/make \ + $(tdir)/patchelf-$(patchelf-version).tar.gz if [ $(good_static_libc) = 1 ]; then \ export LDFLAGS="$$LDFLAGS -static"; \ fi; \ - $(call gbuild, $<, patchelf-$(patchelf-version), static) \ + $(call gbuild, patchelf-$(patchelf-version), static) \ && echo "PatchELF $(patchelf-version)" > $@ @@ -596,9 +598,9 @@ needpatchelf = else needpatchelf = $(ibidir)/patchelf endif -$(ibidir)/bash: $(tdir)/bash-$(bash-version).tar.lz \ - $(ibidir)/readline \ - | $(needpatchelf) +$(ibidir)/bash: $(ibidir)/readline \ + | $(needpatchelf) \ + $(tdir)/bash-$(bash-version).tar.lz # Delete the (possibly) existing Bash executable. rm -f $(ibdir)/bash @@ -622,9 +624,9 @@ $(ibidir)/bash: $(tdir)/bash-$(bash-version).tar.lz \ if [ "x$(static_build)" = xyes ]; then stopt="--enable-static-link";\ else stopt=""; \ fi; \ - $(call gbuild, $<, bash-$(bash-version),, \ - --with-installed-readline=$(ildir) $$stopt, \ - -j$(numthreads)) + $(call gbuild, bash-$(bash-version),, \ + --with-installed-readline=$(ildir) $$stopt, \ + -j$(numthreads)) # Atleast on GNU/Linux systems, Bash doesn't include RPATH by # default. So, we have to manually include it, currently we are @@ -672,12 +674,14 @@ $(ibidir)/bash: $(tdir)/bash-$(bash-version).tar.lz \ # The echo after the PatchELF loop is to avoid a crash if the last # file that PatchELF encounters is not usable (and it returns with # an error). -$(ibidir)/coreutils: $(tdir)/coreutils-$(coreutils-version).tar.xz \ - $(ibidir)/openssl \ - | $(ibidir)/bash +$(ibidir)/coreutils: $(ibidir)/openssl \ + | $(ibidir)/bash \ + $(tdir)/coreutils-$(coreutils-version).tar.xz cd $(ddir) \ && rm -rf coreutils-$(coreutils-version) \ - && if ! tar xf $<; then echo; echo "Tar error"; exit 1; fi \ + && if ! tar xf $(word 1,$(filter $(tdir)/%,$|)); then \ + echo; echo "Tar error"; exit 1; \ + fi \ && cd coreutils-$(coreutils-version) \ && sed -e's|\#\! /bin/sh|\#\! $(ibdir)/bash|' \ -e's|\#\!/bin/sh|\#\! $(ibdir)/bash|' \ @@ -717,10 +721,10 @@ $(ibidir)/coreutils: $(tdir)/coreutils-$(coreutils-version).tar.xz \ #openssl-static = no-dso no-dynamic-engine no-shared #endif $(idir)/etc:; mkdir $@ -$(ibidir)/openssl: $(tdir)/openssl-$(openssl-version).tar.gz \ - $(tdir)/cert.pem \ +$(ibidir)/openssl: $(tdir)/cert.pem \ | $(idir)/etc \ - $(ibidir)/make + $(ibidir)/make \ + $(tdir)/openssl-$(openssl-version).tar.gz # According to OpenSSL's Wiki (link bellow), it can't automatically # detect Mac OS's structure. It will need some help. So we'll use # the `on_mac_os' Make variable that we defined in the configure @@ -732,7 +736,7 @@ $(ibidir)/openssl: $(tdir)/openssl-$(openssl-version).tar.gz \ export KERNEL_BITS=64; \ copt="shared no-ssl2 no-ssl3 enable-ec_nistp_64_gcc_128"; \ fi; \ - $(call gbuild, $<, openssl-$(openssl-version), , \ + $(call gbuild, openssl-$(openssl-version), , \ zlib \ $$copt \ $(rpath_command) \ @@ -765,9 +769,9 @@ $(ibidir)/openssl: $(tdir)/openssl-$(openssl-version).tar.gz \ # them. Note that if it does link with them, the configuration will crash # when the library is updated/changed by the host, and the whole purpose of # this project is avoid dependency on the host as much as possible. -$(ibidir)/curl: $(tdir)/curl-$(curl-version).tar.gz \ - | $(ibidir)/coreutils - $(call gbuild, $<, curl-$(curl-version), , \ +$(ibidir)/curl: | $(ibidir)/coreutils \ + $(tdir)/curl-$(curl-version).tar.gz + $(call gbuild, curl-$(curl-version), , \ LIBS="-pthread" \ --with-zlib=$(ildir) \ --with-ssl=$(idir) \ @@ -803,15 +807,14 @@ $(ibidir)/curl: $(tdir)/curl-$(curl-version).tar.gz \ # building as part of this project. So to avoid too much dependency on the # host system (especially a crash when these libraries are updated on the # host), they are disabled here. -$(ibidir)/wget: $(tdir)/wget-$(wget-version).tar.lz \ - $(ibidir)/libiconv \ - | $(ibidir)/coreutils - +$(ibidir)/wget: $(ibidir)/libiconv \ + | $(ibidir)/coreutils \ + $(tdir)/wget-$(wget-version).tar.lz # We need to explicitly disable `libiconv', because of the # `pkg-config' and `libiconv' problem. libs="-pthread"; \ if [ x$(needs_ldl) = xyes ]; then libs="$$libs -ldl"; fi; \ - $(call gbuild, $<, wget-$(wget-version), , \ + $(call gbuild, wget-$(wget-version), , \ LIBS="$$LIBS $$libs" \ --with-libssl-prefix=$(idir) \ --without-libiconv-prefix \ @@ -839,31 +842,31 @@ $(ibidir)/wget: $(tdir)/wget-$(wget-version).tar.lz \ # process of the higher-level programs and libraries. Note that during the # building of those higher-level programs (after this Makefile finishes), # there is no access to the system's PATH. -$(ibidir)/diffutils: $(tdir)/diffutils-$(diffutils-version).tar.xz \ - | $(ibidir)/coreutils - $(call gbuild, $<, diffutils-$(diffutils-version), static, , V=1) \ +$(ibidir)/diffutils: | $(ibidir)/coreutils \ + $(tdir)/diffutils-$(diffutils-version).tar.xz + $(call gbuild, diffutils-$(diffutils-version), static, , V=1) \ && echo "GNU Diffutils $(diffutils-version)" > $@ -$(ibidir)/file: $(tdir)/file-$(file-version).tar.gz \ - | $(ibidir)/coreutils - $(call gbuild, $<, file-$(file-version), static) \ +$(ibidir)/file: | $(ibidir)/coreutils \ + $(tdir)/file-$(file-version).tar.gz + $(call gbuild, file-$(file-version), static) \ && echo "File $(file-version)" > $@ -$(ibidir)/findutils: $(tdir)/findutils-$(findutils-version).tar.xz \ - | $(ibidir)/coreutils - $(call gbuild, $<, findutils-$(findutils-version), static, , V=1) \ +$(ibidir)/findutils: | $(ibidir)/coreutils \ + $(tdir)/findutils-$(findutils-version).tar.xz + $(call gbuild, findutils-$(findutils-version), static, , V=1) \ && echo "GNU Findutils $(findutils-version)" > $@ -$(ibidir)/gawk: $(tdir)/gawk-$(gawk-version).tar.lz \ - | $(ibidir)/coreutils \ +$(ibidir)/gawk: $(ibidir)/gmp \ $(ibidir)/mpfr \ - $(ibidir)/gmp + | $(ibidir)/coreutils \ + $(tdir)/gawk-$(gawk-version).tar.lz # AWK doesn't include RPATH by default, so we'll have to manually # include it using the `patchelf' program (which was a dependency # of Bash). Just note that AWK produces two executables (for # example `gawk-4.2.1' and `gawk') and a symbolic link `awk' to one # of those executables. - $(call gbuild, $<, gawk-$(gawk-version), static, \ + $(call gbuild, gawk-$(gawk-version), static, \ --with-readline=$(idir)) \ && if [ "x$(needpatchelf)" != x ]; then \ if [ -f $(ibdir)/gawk ]; then \ @@ -876,51 +879,51 @@ $(ibidir)/gawk: $(tdir)/gawk-$(gawk-version).tar.lz \ fi \ && echo "GNU AWK $(gawk-version)" > $@ -$(ibidir)/libiconv: $(tdir)/libiconv-$(libiconv-version).tar.gz \ - $(ibidir)/pkg-config - $(call gbuild, $<, libiconv-$(libiconv-version), static) \ +$(ibidir)/libiconv: | $(ibidir)/pkg-config \ + $(tdir)/libiconv-$(libiconv-version).tar.gz + $(call gbuild, libiconv-$(libiconv-version), static) \ && echo "GNU libiconv $(libiconv-version)" > $@ -$(ibidir)/git: $(tdir)/git-$(git-version).tar.xz \ - $(ibidir)/libiconv \ - $(ibidir)/curl # Coreutils, so Git is built after it. +$(ibidir)/git: $(ibidir)/curl \ + $(ibidir)/libiconv \ + | $(tdir)/git-$(git-version).tar.xz if [ x$(on_mac_os) = xyes ]; then \ export LDFLAGS="$$LDFLAGS -lcharset"; \ fi; \ - $(call gbuild, $<, git-$(git-version), static, \ + $(call gbuild, git-$(git-version), static, \ --without-tcltk --with-shell=$(ibdir)/bash \ --with-iconv=$(idir), V=1) \ && echo "Git $(git-version)" > $@ -$(ibidir)/gmp: $(tdir)/gmp-$(gmp-version).tar.lz \ - | $(ibidir)/coreutils \ - $(ibidir)/m4 - $(call gbuild, $<, gmp-$(gmp-version), static, , , make check) \ +$(ibidir)/gmp: | $(ibidir)/m4 \ + $(ibidir)/coreutils \ + $(tdir)/gmp-$(gmp-version).tar.lz + $(call gbuild, gmp-$(gmp-version), static, , , make check) \ && echo "GNU Multiple Precision Arithmetic Library $(gmp-version)" > $@ # On Mac OS, libtool does different things, so to avoid confusion, we'll # prefix GNU's libtool executables with `glibtool'. -$(ibidir)/glibtool: $(tdir)/libtool-$(libtool-version).tar.xz \ - | $(ibidir)/m4 - $(call gbuild, $<, libtool-$(libtool-version), static, \ +$(ibidir)/glibtool: | $(ibidir)/m4 \ + $(tdir)/libtool-$(libtool-version).tar.xz + $(call gbuild, libtool-$(libtool-version), static, \ --program-prefix=g) \ && ln -s $(ibdir)/glibtoolize $(ibdir)/libtoolize \ && echo "GNU Libtool $(libtool-version)" > $@ -$(ibidir)/grep: $(tdir)/grep-$(grep-version).tar.xz \ - | $(ibidir)/coreutils - $(call gbuild, $<, grep-$(grep-version), static) \ +$(ibidir)/grep: | $(ibidir)/coreutils \ + $(tdir)/grep-$(grep-version).tar.xz + $(call gbuild, grep-$(grep-version), static) \ && echo "GNU Grep $(grep-version)" > $@ -$(ibidir)/libbsd: $(tdir)/libbsd-$(libbsd-version).tar.xz \ - | $(ibidir)/coreutils - $(call gbuild, $<, libbsd-$(libbsd-version), static,,V=1) \ +$(ibidir)/libbsd: | $(ibidir)/coreutils \ + $(tdir)/libbsd-$(libbsd-version).tar.xz + $(call gbuild, libbsd-$(libbsd-version), static,,V=1) \ && echo "Libbsd $(libbsd-version)" > $@ -$(ibidir)/m4: $(tdir)/m4-$(m4-version).tar.gz \ - | $(ibidir)/coreutils \ - $(ibidir)/texinfo - $(call gbuild, $<, m4-$(m4-version), static) \ +$(ibidir)/m4: | $(ibidir)/coreutils \ + $(ibidir)/texinfo \ + $(tdir)/m4-$(m4-version).tar.gz + $(call gbuild, m4-$(m4-version), static) \ && echo "GNU M4 $(m4-version)" > $@ # Metastore is used (through a Git hook) to restore the source modification @@ -945,12 +948,12 @@ needlibbsd = else needlibbsd = $(ibidir)/libbsd endif -$(ibidir)/metastore: $(tdir)/metastore-$(metastore-version).tar.gz \ - $(needlibbsd) \ - | $(ibidir)/coreutils \ - $(ibidir)/gawk \ +$(ibidir)/metastore: $(needlibbsd) \ + | $(ibidir)/sed \ $(ibidir)/git \ - $(ibidir)/sed + $(ibidir)/gawk \ + $(ibidir)/coreutils \ + $(tdir)/metastore-$(metastore-version).tar.gz # Metastore doesn't have any `./configure' script. So we'll just # call `pwd' as a place-holder for the `./configure' command. @@ -975,7 +978,7 @@ $(ibidir)/metastore: $(tdir)/metastore-$(metastore-version).tar.gz \ # is no `.git' directory to work with. So until we find a better # solution, avoid the step to to add the Git hooks. current_dir=$$(pwd); \ - $(call gbuild, $<, metastore-$(metastore-version), static,, \ + $(call gbuild, metastore-$(metastore-version), static,, \ NO_XATTR=1 V=1,,pwd,PREFIX=$(idir)); \ if [ -f $(ibdir)/metastore ]; then \ if [ "x$(needpatchelf)" != x ]; then \ @@ -1008,13 +1011,13 @@ $(ibidir)/metastore: $(tdir)/metastore-$(metastore-version).tar.gz \ fi -$(ibidir)/mpfr: $(tdir)/mpfr-$(mpfr-version).tar.xz \ - $(ibidir)/gmp - $(call gbuild, $<, mpfr-$(mpfr-version), static, , , make check) \ +$(ibidir)/mpfr: $(ibidir)/gmp \ + | $(tdir)/mpfr-$(mpfr-version).tar.xz + $(call gbuild, mpfr-$(mpfr-version), static, , , make check) \ && echo "GNU Multiple Precision Floating-Point Reliably $(mpfr-version)" > $@ -$(ibidir)/pkg-config: $(tdir)/pkg-config-$(pkgconfig-version).tar.gz \ - | $(ibidir)/coreutils +$(ibidir)/pkg-config: | $(ibidir)/coreutils \ + $(tdir)/pkg-config-$(pkgconfig-version).tar.gz # An existing `libiconv' can cause a conflict with `pkg-config', # this is why `libiconv' depends on `pkg-config'. On a clean build, # `pkg-config' is built first. But when we don't have a clean build @@ -1030,28 +1033,28 @@ $(ibidir)/pkg-config: $(tdir)/pkg-config-$(pkgconfig-version).tar.gz \ if [ x$(on_mac_os) = xyes ]; then export compiler="CC=clang"; \ else export compiler=""; \ fi; \ - $(call gbuild, $<, pkg-config-$(pkgconfig-version), static, \ + $(call gbuild, pkg-config-$(pkgconfig-version), static, \ $$compiler --with-internal-glib \ --with-pc-path=$(ildir)/pkgconfig, V=1) \ && echo "pkg-config $(pkgconfig-version)" > $@ -$(ibidir)/sed: $(tdir)/sed-$(sed-version).tar.xz \ - | $(ibidir)/coreutils - $(call gbuild, $<, sed-$(sed-version), static) \ +$(ibidir)/sed: | $(ibidir)/coreutils \ + $(tdir)/sed-$(sed-version).tar.xz + $(call gbuild, sed-$(sed-version), static) \ && echo "GNU Sed $(sed-version)" > $@ -$(ibidir)/texinfo: $(tdir)/texinfo-$(texinfo-version).tar.xz \ - | $(ibidir)/bash - $(call gbuild, $<, texinfo-$(texinfo-version), static) \ +$(ibidir)/texinfo: | $(ibidir)/bash \ + $(tdir)/texinfo-$(texinfo-version).tar.xz + $(call gbuild, texinfo-$(texinfo-version), static) \ && if [ "x$(needpatchelf)" != x ]; then \ $(ibdir)/patchelf --set-rpath $(ildir) $(ibdir)/info; \ $(ibdir)/patchelf --set-rpath $(ildir) $(ibdir)/install-info; \ fi \ && echo "GNU Texinfo $(sed-version)" > $@ -$(ibidir)/which: $(tdir)/which-$(which-version).tar.gz \ - | $(ibidir)/coreutils - $(call gbuild, $<, which-$(which-version), static) \ +$(ibidir)/which: | $(ibidir)/coreutils \ + $(tdir)/which-$(which-version).tar.gz + $(call gbuild, which-$(which-version), static) \ && echo "GNU Which $(which-version)" > $@ @@ -1066,14 +1069,14 @@ $(ibidir)/which: $(tdir)/which-$(which-version).tar.gz \ # GCC and its prerequisites # ------------------------- -$(ibidir)/isl: $(tdir)/isl-$(isl-version).tar.bz2 \ - $(ibidir)/gmp - $(call gbuild, $<, isl-$(isl-version), static, , V=1) \ +$(ibidir)/isl: $(ibidir)/gmp \ + | $(tdir)/isl-$(isl-version).tar.bz2 + $(call gbuild, isl-$(isl-version), static, , V=1) \ && echo "GNU Integer Set Library $(isl-version)" > $@ -$(ibidir)/mpc: $(tdir)/mpc-$(mpc-version).tar.gz \ - $(ibidir)/mpfr - $(call gbuild, $<, mpc-$(mpc-version), static, , , make check) \ +$(ibidir)/mpc: $(ibidir)/mpfr \ + | $(tdir)/mpc-$(mpc-version).tar.gz + $(call gbuild, mpc-$(mpc-version), static, , , make check) \ && echo "GNU Multiple Precision Complex library" > $@ # Binutils' assembler (`as') and linker (`ld') will conflict with other @@ -1097,20 +1100,19 @@ endif # programs (http://savannah.nongnu.org/bugs/?56294). Therefore, we'll set # all other basic programs as Binutils prerequisite and GCC (the final # basic target) ultimately just depends on Binutils. -$(ibidir)/binutils: $(binutils-tarball) \ - | $(gcc-prerequisites) \ - $(ibidir)/metastore \ - $(ibidir)/findutils \ - $(ibidir)/diffutils \ - $(ibidir)/coreutils \ - $(ibidir)/glibtool \ - $(ibidir)/which \ +$(ibidir)/binutils: | $(ibidir)/sed \ $(ibidir)/wget \ $(ibidir)/grep \ $(ibidir)/file \ $(ibidir)/gawk \ - $(ibidir)/sed - + $(ibidir)/which \ + $(ibidir)/glibtool \ + $(binutils-tarball) \ + $(ibidir)/metastore \ + $(ibidir)/findutils \ + $(ibidir)/diffutils \ + $(ibidir)/coreutils \ + $(gcc-prerequisites) if [ x$(on_mac_os) = xyes ]; then \ $(call makelink,as); \ $(call makelink,ar); \ @@ -1120,7 +1122,7 @@ $(ibidir)/binutils: $(binutils-tarball) \ $(call makelink,ranlib); \ echo "" > $@; \ else \ - $(call gbuild, $<, binutils-$(binutils-version), static) \ + $(call gbuild, binutils-$(binutils-version), static) \ && echo "GNU Binutils $(binutils-version)" > $@; \ fi @@ -1142,8 +1144,8 @@ gcc-tarball = else gcc-tarball = $(tdir)/gcc-$(gcc-version).tar.xz endif -$(ibidir)/gcc: $(gcc-tarball) \ - $(ibidir)/binutils +$(ibidir)/gcc: | $(ibidir)/binutils \ + $(gcc-tarball) # GCC builds is own libraries in '$(idir)/lib64'. But all other # libraries are in '$(idir)/lib'. Since this project is only for a @@ -1167,7 +1169,7 @@ $(ibidir)/gcc: $(gcc-tarball) \ \ cd $(ddir); \ rm -rf gcc-$(gcc-version); \ - tar xf $< \ + tar xf $(word 1,$(filter $(tdir)/%,$|)) \ && cd gcc-$(gcc-version) \ && mkdir build \ && cd build \ diff --git a/reproduce/software/make/build-rules.mk b/reproduce/software/make/build-rules.mk index b82ccc0..a2d1c17 100644 --- a/reproduce/software/make/build-rules.mk +++ b/reproduce/software/make/build-rules.mk @@ -38,14 +38,13 @@ # ---------------- # # Arguments: -# 1: Tarball full address. -# 2: Directory name after unpacking. -# 3: Set to `static' for a static build. -# 4: Extra configuration options. -# 5: Extra options/arguments to pass to Make. -# 6: Step to run between `make' and `make install': usually `make check'. -# 7: The configuration script (`configure' by default). -# 8: Arguments for `make install'. +# 1: Directory name after unpacking. +# 2: Set to `static' for a static build. +# 3: Extra configuration options. +# 4: Extra options/arguments to pass to Make. +# 5: Step to run between `make' and `make install': usually `make check'. +# 6: The configuration script (`configure' by default). +# 7: Arguments for `make install'. # # NOTE: Unfortunately the configure script of `zlib' doesn't recognize # `SHELL'. So we'll have to remove it from the call to the configure @@ -54,17 +53,22 @@ # NOTE: A program might not contain any configure script. In this case, # we'll just pass a non-relevant function like `pwd'. So SED should be used # to modify `confscript' or to set `configop'. -gbuild = if [ x$(static_build) = xyes ] && [ "x$(3)" = xstatic ]; then \ +gbuild = if [ x$(static_build) = xyes ] && [ "x$(2)" = xstatic ]; then \ export LDFLAGS="$$LDFLAGS -static"; \ fi; \ - check="$(6)"; \ + check="$(5)"; \ if [ x"$$check" = x ]; then check="echo Skipping-check"; fi; \ - cd $(ddir); rm -rf $(2); \ - if ! tar xf $(1); then echo; echo "Tar error"; exit 1; fi; \ - cd $(2); \ + cd $(ddir); rm -rf $(1); \ + if [ x"$$gbuild_tar" = x ]; then \ + tarball=$(word 1,$(filter $(tdir)/%,$|)); \ + else tarball=$$gbuild_tar; \ + fi; \ + if ! tar xf $$tarball; then \ + echo; echo "Tar error"; exit 1; fi; \ + cd $(1); \ \ - if [ x"$(strip $(7))" = x ]; then confscript=./configure; \ - else confscript="$(strip $(7))"; \ + if [ x"$(strip $(6))" = x ]; then confscript=./configure; \ + else confscript="$(strip $(6))"; \ fi; \ \ if [ -f $(ibdir)/bash ]; then \ @@ -81,20 +85,20 @@ gbuild = if [ x$(static_build) = xyes ] && [ "x$(3)" = xstatic ]; then \ fi; \ \ if [ -f $$confscript ]; then \ - if [ x"$(strip $(2))" = x"zlib-$(zlib-version)" ]; then \ + if [ x"$(strip $(1))" = x"zlib-$(zlib-version)" ]; then \ configop="--prefix=$(idir)"; \ else configop="$$shellop --prefix=$(idir)"; \ fi; \ fi; \ \ echo; echo "Using '$$confscript' to configure:"; echo; \ - echo "$$confscript $(4) $$configop"; echo; \ - $$confscript $(4) $$configop \ - && make "$$shellop" $(5) \ + echo "$$confscript $(3) $$configop"; echo; \ + $$confscript $(3) $$configop \ + && make "$$shellop" $(4) \ && $$check \ - && make "$$shellop" install $(8) \ + && make "$$shellop" install $(7) \ && cd .. \ - && rm -rf $(2) + && rm -rf $(1) @@ -103,23 +107,23 @@ gbuild = if [ x$(static_build) = xyes ] && [ "x$(3)" = xstatic ]; then \ # ----- # # According to the link below, in CMake `/bin/sh' is hardcoded, so there is -# no way to change it. +# no way to change it unfortunately! # # https://stackoverflow.com/questions/21167014/how-to-set-shell-variable-in-makefiles-generated-by-cmake -cbuild = if [ x$(static_build) = xyes ] && [ $(3)x = staticx ]; then \ +cbuild = if [ x$(static_build) = xyes ] && [ $(2)x = staticx ]; then \ export LDFLAGS="$$LDFLAGS -static"; \ opts="-DBUILD_SHARED_LIBS=OFF"; \ fi; \ cd $(ddir) \ - && rm -rf $(2) \ - && tar xf $(1) \ - && cd $(2) \ + && rm -rf $(1) \ + && tar xf $(word 1,$(filter $(tdir)/%,$|)) \ + && cd $(1) \ && rm -rf project-build \ && mkdir project-build \ && cd project-build \ && cmake .. -DCMAKE_LIBRARY_PATH=$(ildir) \ -DCMAKE_INSTALL_PREFIX=$(idir) \ - -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON $$opts $(4) \ + -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON $$opts $(3) \ && make && make install \ && cd ../.. \ - && rm -rf $(2) + && rm -rf $(1) diff --git a/reproduce/software/make/high-level.mk b/reproduce/software/make/high-level.mk index 7ee7062..e164ef0 100644 --- a/reproduce/software/make/high-level.mk +++ b/reproduce/software/make/high-level.mk @@ -184,7 +184,7 @@ $(tarballs): $(tdir)/%: | $(lockdir) # Remove all numbers, `-' and `.' from the tarball name so we can # search more easily only with the program name. - n=$$(echo $* | sed -e's/[0-9\-]/ /g' -e's/\./ /g' \ + @n=$$(echo $* | sed -e's/[0-9\-]/ /g' -e's/\./ /g' \ | awk '{print $$1}' ) # Set the top download link of the requested tarball. @@ -312,8 +312,10 @@ $(tarballs): $(tdir)/%: | $(lockdir) mv "$@.unchecked" "$@" else checksum=$$(sha512sum "$@.unchecked" | awk '{print $$1}') - if [ x"$$checksum" = x"$$c" ]; then mv "$@.unchecked" "$@" - else echo "ERROR: Non-matching checksum for '$*'." + if [ x"$$checksum" = x"$$c" ]; then + mv "$@.unchecked" "$@" + else + echo "ERROR: Non-matching checksum for '$*'." echo "Checksum should be: $$c" echo "Checksum is: $$checksum" exit 1 @@ -337,21 +339,21 @@ $(tarballs): $(tdir)/%: | $(lockdir) # libraries. Therefore, we can't use the easy `.a' suffix for static # libraries as targets and there are different conventions for shared # library names. -$(ibidir)/apr: $(tdir)/apr-$(apr-version).tar.gz - $(call gbuild, $<, apr-$(apr-version), ,--disable-static) \ +$(ibidir)/apr: | $(tdir)/apr-$(apr-version).tar.gz + $(call gbuild, apr-$(apr-version), ,--disable-static) \ && echo "Apache Portable Runtime $(apr-version)" > $@ -$(ibidir)/apr-util: $(tdir)/apr-util-$(apr-util-version).tar.gz \ - $(ibidir)/apr - $(call gbuild, $<, apr-util-$(apr-util-version), , \ +$(ibidir)/apr-util: $(ibidir)/apr \ + | $(tdir)/apr-util-$(apr-util-version).tar.gz + $(call gbuild, apr-util-$(apr-util-version), , \ --disable-static \ --with-apr=$(idir) \ --with-openssl=$(idir) \ --with-crypto ) \ && echo "Apache Portable Runtime Utility $(apr-util-version)" > $@ -$(ibidir)/atlas: $(tdir)/atlas-$(atlas-version).tar.bz2 \ - $(tdir)/lapack-$(lapack-version).tar.gz +$(ibidir)/atlas: | $(tdir)/atlas-$(atlas-version).tar.bz2 \ + $(tdir)/lapack-$(lapack-version).tar.gz # Get the operating system specific features (how to get # CPU frequency and the library suffixes). To make the steps @@ -391,13 +393,13 @@ $(ibidir)/atlas: $(tdir)/atlas-$(atlas-version).tar.bz2 \ # `rpath_command'. export LDFLAGS=-L$(ildir) cd $(ddir) \ - && tar xf $< \ + && tar xf $(tdir)/atlas-$(atlas-version).tar.bz2 \ && cd ATLAS \ && rm -rf build \ && mkdir build \ && cd build \ && ../configure -b 64 -D c -DPentiumCPS=$$core \ - --with-netlib-lapack-tarfile=$(word 2, $^) \ + --with-netlib-lapack-tarfile=$(tdir)/lapack-$(lapack-version).tar.gz \ --cripple-atlas-performance \ -Fa alg -fPIC --shared $$clangflag \ --prefix=$(idir) \ @@ -431,15 +433,16 @@ $(ibidir)/atlas: $(tdir)/atlas-$(atlas-version).tar.bz2 \ fi # Boost doesn't use the standard GNU Build System. -$(ibidir)/boost: $(tdir)/boost-$(boost-version).tar.gz \ - $(ibidir)/openmpi \ - $(ibidir)/python +$(ibidir)/boost: $(ibidir)/openmpi \ + | $(ibidir)/python \ + $(tdir)/boost-$(boost-version).tar.gz vstr=$$(echo $(boost-version) | sed -e's/\./_/g') rm -rf $(ddir)/boost_$$vstr - topdir=$(pwd); cd $(ddir); tar xf $< - cd boost_$$vstr - ./bootstrap.sh --prefix=$(idir) --with-libraries=all \ - --with-python=python3 \ + topdir=$(pwd); cd $(ddir); + tar xf $(word 1,$(filter $(tdir)/%,$|)) + && cd boost_$$vstr + && ./bootstrap.sh --prefix=$(idir) --with-libraries=all \ + --with-python=python3 \ && echo "using mpi ;" > project-config.jam \ && ./b2 stage threading=multi link=shared --prefix=$(idir) -j$(numthreads) \ && ./b2 install threading=multi link=shared --prefix=$(idir) -j$(numthreads) \ @@ -447,14 +450,14 @@ $(ibidir)/boost: $(tdir)/boost-$(boost-version).tar.gz \ && rm -rf $(ddir)/boost_$$vstr \ && echo "Boost $(boost-version)" > $@ -$(ibidir)/cfitsio: $(tdir)/cfitsio-$(cfitsio-version).tar.gz \ - $(ibidir)/curl +$(ibidir)/cfitsio: $(ibidir)/curl \ + | $(tdir)/cfitsio-$(cfitsio-version).tar.gz # CFITSIO hard-codes '@rpath' inside the shared library on # Mac systems. So we need to change it to our library # installation path. It doesn't affect GNU/Linux, so we'll # just do it in any case to keep things clean. - topdir=$(pwd); cd $(ddir); tar xf $< + topdir=$(pwd); cd $(ddir); tar xf $(word 1,$(filter $(tdir)/%,$|)) customtar=cfitsio-$(cfitsio-version)-custom.tar.gz cd cfitsio-$(cfitsio-version) sed configure -e's|@rpath|$(ildir)|g' > configure_tmp @@ -467,60 +470,61 @@ $(ibidir)/cfitsio: $(tdir)/cfitsio-$(cfitsio-version).tar.gz \ # Continue the standard build on the customized tarball. Note that # with the installation of CFITSIO, `fpack' and `funpack' are not # installed by default. Because of that, they are added explicity. - $(call gbuild, $$customtar, cfitsio-$(cfitsio-version), , \ + export gbuild_tar=$$customtar + $(call gbuild, cfitsio-$(cfitsio-version), , \ --enable-sse2 --enable-reentrant \ --with-bzip2=$(idir), , make shared fpack funpack) \ && rm $$customtar \ && echo "CFITSIO $(cfitsio-version)" > $@ -$(ibidir)/cairo: $(tdir)/cairo-$(cairo-version).tar.xz \ - $(ibidir)/freetype \ +$(ibidir)/cairo: $(ibidir)/freetype \ $(ibidir)/libpng \ - $(ibidir)/pixman - $(call gbuild, $<, cairo-$(cairo-version), static, \ + $(ibidir)/pixman \ + | $(tdir)/cairo-$(cairo-version).tar.xz + $(call gbuild, cairo-$(cairo-version), static, \ --with-x=no, -j$(numthreads) V=1) \ && echo "Cairo $(cairo-version)" > $@ # Eigen is just headers! So it doesn't need to be compiled. Once unpacked # it has a checksum after `eigen-eigen', so we'll just use a `*' to choose # the unpacked directory. -$(ibidir)/eigen: $(tdir)/eigen-$(eigen-version).tar.gz +$(ibidir)/eigen: | $(tdir)/eigen-$(eigen-version).tar.gz rm -rf $(ddir)/eigen-eigen-* - topdir=$(pwd); cd $(ddir); tar xf $< + topdir=$(pwd); cd $(ddir); tar xf $(word 1,$(filter $(tdir)/%,$|)) cd eigen-eigen-* cp -r Eigen $(iidir)/eigen3 \ && cd $$topdir \ && rm -rf $(ddir)/eigen-eigen-* \ && echo "Eigen $(eigen-version)" > $@ -$(ibidir)/fftw: $(tdir)/fftw-$(fftw-version).tar.gz +$(ibidir)/fftw: | $(tdir)/fftw-$(fftw-version).tar.gz # FFTW's single and double precission libraries must be built # independently: for the the single-precision library, we need to # add the `--enable-float' option. We will build this first, then # the default double-precision library. confop="--enable-shared --enable-threads --enable-avx --enable-sse2" - $(call gbuild, $<, fftw-$(fftw-version), static, \ + $(call gbuild, fftw-$(fftw-version), static, \ $$confop --enable-float) \ - && $(call gbuild, $<, fftw-$(fftw-version), static, \ + && $(call gbuild, fftw-$(fftw-version), static, \ $$confop) \ && cp $(dtexdir)/fftw.tex $(ictdir)/ \ && echo "FFTW $(fftw-version) \citep{fftw}" > $@ # Freetype is necessary to install matplotlib -$(ibidir)/freetype: $(tdir)/freetype-$(freetype-version).tar.gz \ - $(ibidir)/libpng - $(call gbuild, $<, freetype-$(freetype-version), static) \ +$(ibidir)/freetype: $(ibidir)/libpng \ + | $(tdir)/freetype-$(freetype-version).tar.gz + $(call gbuild, freetype-$(freetype-version), static) \ && echo "FreeType $(freetype-version)" > $@ -$(ibidir)/gsl: $(tdir)/gsl-$(gsl-version).tar.gz - $(call gbuild, $<, gsl-$(gsl-version), static) \ +$(ibidir)/gsl: | $(tdir)/gsl-$(gsl-version).tar.gz + $(call gbuild, gsl-$(gsl-version), static) \ && echo "GNU Scientific Library $(gsl-version)" > $@ -$(ibidir)/hdf5: $(tdir)/hdf5-$(hdf5-version).tar.gz \ - $(ibidir)/openmpi +$(ibidir)/hdf5: $(ibidir)/openmpi \ + | $(tdir)/hdf5-$(hdf5-version).tar.gz export CC=mpicc; \ export FC=mpif90; \ - $(call gbuild, $<, hdf5-$(hdf5-version), static, \ + $(call gbuild, hdf5-$(hdf5-version), static, \ --enable-parallel \ --enable-fortran, -j$(numthreads) V=1) \ && echo "HDF5 library $(hdf5-version)" > $@ @@ -540,11 +544,11 @@ healpix-python-dep = else healpix-python-dep = $(ipydir)/matplotlib $(ipydir)/astropy endif -$(ibidir)/healpix: $(tdir)/healpix-$(healpix-version).tar.gz \ +$(ibidir)/healpix: $(ibidir)/cfitsio \ $(healpix-python-dep) \ - $(ibidir)/autoconf \ - $(ibidir)/automake \ - $(ibidir)/cfitsio + | $(ibidir)/autoconf \ + $(ibidir)/automake \ + $(tdir)/healpix-$(healpix-version).tar.gz if [ x"$(healpix-python-dep)" = x ]; then pycommand1="echo no-healpy-because-no-other-python" pycommand2="echo no-healpy-because-no-other-python" @@ -553,8 +557,9 @@ $(ibidir)/healpix: $(tdir)/healpix-$(healpix-version).tar.gz \ pycommand2="python setup.py install" fi rm -rf $(ddir)/Healpix_$(healpix-version) - topdir=$(pwd); cd $(ddir); tar xf $< - cd Healpix_$(healpix-version)/src/C/autotools/ \ + topdir=$(pwd); cd $(ddir); + tar xf $(word 1,$(filter $(tdir)/%,$|)) + && cd Healpix_$(healpix-version)/src/C/autotools/ \ && autoreconf --install \ && ./configure --prefix=$(idir) \ && make V=1 -j$(numthreads) SHELL=$(ibdir)/bash \ @@ -572,51 +577,51 @@ $(ibidir)/healpix: $(tdir)/healpix-$(healpix-version).tar.gz \ && cp $(dtexdir)/healpix.tex $(ictdir)/ \ && echo "HEALPix $(healpix-version) \citep{healpix}" > $@ -$(ibidir)/libjpeg: $(tdir)/jpegsrc.$(libjpeg-version).tar.gz - $(call gbuild, $<, jpeg-9b, static) \ +$(ibidir)/libjpeg: | $(tdir)/jpegsrc.$(libjpeg-version).tar.gz + $(call gbuild, jpeg-9b, static) \ && echo "Libjpeg $(libjpeg-version)" > $@ -$(ibidir)/libnsl: $(tdir)/libnsl-$(libnsl-version).tar.gz \ +$(ibidir)/libnsl: $(ibidir)/libtirpc \ $(ibidir)/rpcsvc-proto \ - $(ibidir)/libtirpc - $(call gbuild, $<, libnsl-$(libnsl-version), static, \ + | $(tdir)/libnsl-$(libnsl-version).tar.gz + $(call gbuild, libnsl-$(libnsl-version), static, \ --sysconfdir=$(idir)/etc) \ && echo "Libnsl $(libnsl-version)" > $@ -$(ibidir)/libpng: $(tdir)/libpng-$(libpng-version).tar.xz - $(call gbuild, $<, libpng-$(libpng-version), static) \ +$(ibidir)/libpng: | $(tdir)/libpng-$(libpng-version).tar.xz + $(call gbuild, libpng-$(libpng-version), static) \ && echo "Libpng $(libpng-version)" > $@ -$(ibidir)/libtiff: $(tdir)/tiff-$(libtiff-version).tar.gz \ - $(ibidir)/libjpeg - $(call gbuild, $<, tiff-$(libtiff-version), static, \ +$(ibidir)/libtiff: $(ibidir)/libjpeg \ + | $(tdir)/tiff-$(libtiff-version).tar.gz + $(call gbuild, tiff-$(libtiff-version), static, \ --disable-jbig \ --disable-webp \ --disable-zstd) \ && echo "Libtiff $(libtiff-version)" > $@ -$(ibidir)/libtirpc: $(tdir)/libtirpc-$(libtirpc-version).tar.bz2 - $(call gbuild, $<, libtirpc-$(libtirpc-version), static, \ +$(ibidir)/libtirpc: | $(tdir)/libtirpc-$(libtirpc-version).tar.bz2 + $(call gbuild, libtirpc-$(libtirpc-version), static, \ --disable-gssapi, V=1) \ echo "libtirpc $(libtirpc-version)" > $@ -$(ibidir)/libxml2: $(tdir)/libxml2-$(libxml2-version).tar.gz +$(ibidir)/libxml2: | $(tdir)/libxml2-$(libxml2-version).tar.gz # The libxml2 tarball also contains Python bindings which are built and # installed to a system directory by default. If you don't need the Python # bindings, the easiest solution is to compile without Python support: # ./configure --without-python # If you really need the Python bindings, try the # --with-python-install-dir=DIR option - $(call gbuild, $<, libxml2-$(libxml2-version), static, \ + $(call gbuild, libxml2-$(libxml2-version), static, \ --without-python) \ && echo "Libxml2 $(libxml2-version)" > $@ -$(ibidir)/openblas: $(tdir)/openblas-$(openblas-version).tar.gz +$(ibidir)/openblas: | $(tdir)/openblas-$(openblas-version).tar.gz if [ x$(on_mac_os) = xyes ]; then \ export CC=clang; \ fi; \ cd $(ddir) \ - && tar xf $< \ + && tar xf $(word 1,$(filter $(tdir)/%,$|)) \ && cd OpenBLAS-$(openblas-version) \ && make \ && make PREFIX=$(idir) install \ @@ -624,8 +629,8 @@ $(ibidir)/openblas: $(tdir)/openblas-$(openblas-version).tar.gz && rm -rf OpenBLAS-$(openblas-version) \ && echo "OpenBLAS $(openblas-version)" > $@ -$(ibidir)/openmpi: $(tdir)/openmpi-$(openmpi-version).tar.gz - $(call gbuild, $<, openmpi-$(openmpi-version), static, , \ +$(ibidir)/openmpi: | $(tdir)/openmpi-$(openmpi-version).tar.gz + $(call gbuild, openmpi-$(openmpi-version), static, , \ -j$(numthreads) V=1) \ && echo "Open MPI $(openmpi-version)" > $@ @@ -634,8 +639,8 @@ $(ibidir)/openmpi: $(tdir)/openmpi-$(openmpi-version).tar.gz # within the project because of all the security issues it may cause. Only # enable/build it in a project with caution, and if there is no other # solution (for example to disable SSH in a program that may ask for it. -$(ibidir)/openssh: $(tdir)/openssh-$(openssh-version).tar.gz - $(call gbuild, $<, openssh-$(openssh-version), static, \ +$(ibidir)/openssh: | $(tdir)/openssh-$(openssh-version).tar.gz + $(call gbuild, openssh-$(openssh-version), static, \ --with-privsep-path=$(ibdir)/.ssh_privsep \ --with-privsep-user=nobody \ --with-md5-passwords \ @@ -643,23 +648,23 @@ $(ibidir)/openssh: $(tdir)/openssh-$(openssh-version).tar.gz , -j$(numthreads) V=1) \ && echo "OpenSSH $(openssh-version)" > $@ -$(ibidir)/pixman: $(tdir)/pixman-$(pixman-version).tar.gz - $(call gbuild, $<, pixman-$(pixman-version), static, , \ +$(ibidir)/pixman: | $(tdir)/pixman-$(pixman-version).tar.gz + $(call gbuild, pixman-$(pixman-version), static, , \ -j$(numthreads) V=1) \ && echo "Pixman $(pixman-version)" > $@ -$(ibidir)/rpcsvc-proto: $(tdir)/rpcsvc-proto-$(rpcsvc-proto-version).tar.xz - $(call gbuild, $<, rpcsvc-proto-$(rpcsvc-proto-version), static) \ +$(ibidir)/rpcsvc-proto: | $(tdir)/rpcsvc-proto-$(rpcsvc-proto-version).tar.xz + $(call gbuild, rpcsvc-proto-$(rpcsvc-proto-version), static) \ && echo "rpcsvc $(rpcsvc-proto-version)" > $@ -$(ibidir)/tides: $(tdir)/tides-$(tides-version).tar.gz - $(call gbuild, $<, tides-$(tides-version), static,\ +$(ibidir)/tides: | $(tdir)/tides-$(tides-version).tar.gz + $(call gbuild, tides-$(tides-version), static,\ --with-gmp=$(idir) --with-mpfr=$(idir)) \ && cp $(dtexdir)/tides.tex $(ictdir)/ \ && echo "TIDES $(tides-version) \citep{tides}" > $@ -$(ibidir)/yaml: $(tdir)/yaml-$(yaml-version).tar.gz - $(call gbuild, $<, yaml-$(yaml-version), static) \ +$(ibidir)/yaml: | $(tdir)/yaml-$(yaml-version).tar.gz + $(call gbuild, yaml-$(yaml-version), static) \ && echo "LibYAML $(yaml-version)" > $@ @@ -687,10 +692,10 @@ $(ibidir)/yaml: $(tdir)/yaml-$(yaml-version).tar.gz # functions! But apparently `libgit2' has its own implementation of libiconv # that it uses if it can't find libiconv on macOS. So, to fix this problem # it is necessary to use the option `-DUSE_ICONV=OFF` in the configure step. -$(ibidir)/libgit2: $(tdir)/libgit2-$(libgit2-version).tar.gz \ - $(ibidir)/cmake \ - $(ibidir)/curl - $(call cbuild, $<, libgit2-$(libgit2-version), static, \ +$(ibidir)/libgit2: $(ibidir)/curl \ + | $(ibidir)/cmake \ + $(tdir)/libgit2-$(libgit2-version).tar.gz + $(call cbuild, libgit2-$(libgit2-version), static, \ -DUSE_SSH=OFF -DBUILD_CLAR=OFF \ -DTHREADSAFE=ON -DUSE_ICONV=OFF ) \ && if [ x$(on_mac_os) = xyes ]; then \ @@ -699,9 +704,9 @@ $(ibidir)/libgit2: $(tdir)/libgit2-$(libgit2-version).tar.gz \ fi \ && echo "Libgit2 $(libgit2-version)" > $@ -$(ibidir)/wcslib: $(tdir)/wcslib-$(wcslib-version).tar.bz2 \ - $(ibidir)/cfitsio - $(call gbuild, $<, wcslib-$(wcslib-version), , \ +$(ibidir)/wcslib: $(ibidir)/cfitsio \ + | $(tdir)/wcslib-$(wcslib-version).tar.bz2 + $(call gbuild, wcslib-$(wcslib-version), , \ LIBS="-pthread -lcurl -lm" \ --with-cfitsiolib=$(ildir) \ --with-cfitsioinc=$(idir)/include \ @@ -727,24 +732,25 @@ $(ibidir)/wcslib: $(tdir)/wcslib-$(wcslib-version).tar.bz2 \ # Astrometry-net contains a lot of programs. We need to specify the # installation directory and the Python executable (by default it will look # for /usr/bin/python) -$(ibidir)/astrometrynet: $(tdir)/astrometry.net-$(astrometrynet-version).tar.gz \ - $(ibidir)/cfitsio \ - $(ibidir)/libjpeg \ +$(ibidir)/astrometrynet: $(ibidir)/gsl \ + $(ibidir)/swig \ + $(ipydir)/numpy \ + $(ibidir)/cairo \ $(ibidir)/libpng \ $(ibidir)/netpbm \ - $(ibidir)/python \ $(ibidir)/wcslib \ - $(ibidir)/cairo \ - $(ipydir)/numpy \ - $(ibidir)/swig \ - $(ibidir)/gsl + $(ibidir)/cfitsio \ + $(ibidir)/libjpeg \ + | $(tdir)/astrometry.net-$(astrometrynet-version).tar.gz # We are modifying the Makefile in two steps because on Mac OS # system we do not have `/proc/cpuinfo' nor `free'. Since this is # only for the `report.txt', this changes do not causes problems in # running `astrometrynet' cd $(ddir) \ && rm -rf astrometry.net-$(astrometrynet-version) \ - && if ! tar xf $<; then echo; echo "Tar error"; exit 1; fi \ + && if ! tar xf $(word 1,$(filter $(tdir)/%,$|)); then \ + echo; echo "Tar error"; exit 1; \ + fi \ && cd astrometry.net-$(astrometrynet-version) \ && sed -e 's|cat /proc/cpuinfo|echo "Ignoring CPU info"|' \ -e 's|-free|echo "Ignoring RAM info"|' Makefile > Makefile.tmp \ @@ -758,17 +764,17 @@ $(ibidir)/astrometrynet: $(tdir)/astrometry.net-$(astrometrynet-version).tar.gz && cp $(dtexdir)/astrometrynet.tex $(ictdir)/ \ && echo "Astrometry.net $(astrometrynet-version) \citep{astrometrynet}" > $@ -$(ibidir)/autoconf: $(tdir)/autoconf-$(autoconf-version).tar.lz - $(call gbuild, $<, autoconf-$(autoconf-version), static, ,V=1) \ +$(ibidir)/autoconf: | $(tdir)/autoconf-$(autoconf-version).tar.lz + $(call gbuild, autoconf-$(autoconf-version), static, ,V=1) \ && echo "GNU Autoconf $(autoconf-version)" > $@ -$(ibidir)/automake: $(tdir)/automake-$(automake-version).tar.gz - $(call gbuild, $<, automake-$(automake-version), static, ,V=1) \ +$(ibidir)/automake: | $(tdir)/automake-$(automake-version).tar.gz + $(call gbuild, automake-$(automake-version), static, ,V=1) \ && echo "GNU Automake $(automake-version)" > $@ -$(ibidir)/bison: $(tdir)/bison-$(bison-version).tar.xz \ - $(ibidir)/help2man - $(call gbuild, $<, bison-$(bison-version), static, ,V=1) \ +$(ibidir)/bison: | $(ibidir)/help2man \ + $(tdir)/bison-$(bison-version).tar.xz + $(call gbuild, bison-$(bison-version), static, ,V=1) \ && echo "GNU Bison $(bison-version)" > $@ # cdsclient is a set of software written in c to interact with astronomical @@ -778,9 +784,9 @@ $(ibidir)/bison: $(tdir)/bison-$(bison-version).tar.xz \ # programs are scripts and we need to touch them before installing. # Otherwise this software will be re-built each time the configure step is # invoked. -$(ibidir)/cdsclient: $(tdir)/cdsclient-$(cdsclient-version).tar.gz +$(ibidir)/cdsclient: | $(tdir)/cdsclient-$(cdsclient-version).tar.gz cd $(ddir) \ - && tar xf $< \ + && tar xf $(word 1,$(filter $(tdir)/%,$|)) \ && cd cdsclient-$(cdsclient-version) \ && touch * \ && ./configure --prefix=$(idir) \ @@ -791,8 +797,8 @@ $(ibidir)/cdsclient: $(tdir)/cdsclient-$(cdsclient-version).tar.gz && echo "cdsclient $(cdsclient-version)" > $@ # CMake can be built with its custom `./bootstrap' script. -$(ibidir)/cmake: $(tdir)/cmake-$(cmake-version).tar.gz \ - $(ibidir)/curl +$(ibidir)/cmake: $(ibidir)/curl \ + | $(tdir)/cmake-$(cmake-version).tar.gz # After searching in `bootstrap', I couldn't find `LIBS', only # `LDFLAGS'. So the extra libraries are being added to `LDFLAGS', # not `LIBS'. @@ -805,7 +811,7 @@ $(ibidir)/cmake: $(tdir)/cmake-$(cmake-version).tar.gz \ fi; \ cd $(ddir) \ && rm -rf cmake-$(cmake-version) \ - && tar xf $< \ + && tar xf $(word 1,$(filter $(tdir)/%,$|)) \ && cd cmake-$(cmake-version) \ && ./bootstrap --prefix=$(idir) --system-curl --system-zlib \ --system-bzip2 --system-liblzma --no-qt-gui \ @@ -816,40 +822,40 @@ $(ibidir)/cmake: $(tdir)/cmake-$(cmake-version).tar.gz \ && rm -rf cmake-$(cmake-version) \ && echo "CMake $(cmake-version)" > $@ -$(ibidir)/flex: $(tdir)/flex-$(flex-version).tar.gz \ - $(ibidir)/bison - $(call gbuild, $<, flex-$(flex-version), static, ,V=1) \ +$(ibidir)/flex: $(ibidir)/bison \ + | $(tdir)/flex-$(flex-version).tar.gz + $(call gbuild, flex-$(flex-version), static, ,V=1) \ && echo "Flex $(swig-version)" > $@ -$(ibidir)/ghostscript: $(tdir)/ghostscript-$(ghostscript-version).tar.gz \ - $(ibidir)/libtiff - $(call gbuild, $<, ghostscript-$(ghostscript-version)) \ +$(ibidir)/ghostscript: $(ibidir)/libtiff \ + | $(tdir)/ghostscript-$(ghostscript-version).tar.gz + $(call gbuild, ghostscript-$(ghostscript-version)) \ && echo "GPL Ghostscript $(ghostscript-version)" > $@ -$(ibidir)/gnuastro: $(tdir)/gnuastro-$(gnuastro-version).tar.lz \ - $(ibidir)/ghostscript \ +$(ibidir)/gnuastro: $(ibidir)/gsl \ + $(ibidir)/wcslib \ $(ibidir)/libjpeg \ $(ibidir)/libtiff \ $(ibidir)/libgit2 \ - $(ibidir)/wcslib \ - $(ibidir)/gsl + $(ibidir)/ghostscript \ + | $(tdir)/gnuastro-$(gnuastro-version).tar.lz ifeq ($(static_build),yes) staticopts="--enable-static=yes --enable-shared=no"; endif - $(call gbuild, $<, gnuastro-$(gnuastro-version), static, \ + $(call gbuild, gnuastro-$(gnuastro-version), static, \ $$staticopts, -j$(numthreads)) \ && cp $(dtexdir)/gnuastro.tex $(ictdir)/ \ && echo "GNU Astronomy Utilities $(gnuastro-version) \citep{gnuastro}" > $@ -$(ibidir)/help2man: $(tdir)/help2man-$(help2man-version).tar.xz - $(call gbuild, $<, help2man-$(help2man-version), static, ,V=1) \ +$(ibidir)/help2man: | $(tdir)/help2man-$(help2man-version).tar.xz + $(call gbuild, help2man-$(help2man-version), static, ,V=1) \ && echo "Help2man $(Help2man-version)" > $@ -$(ibidir)/imagemagick: $(tdir)/imagemagick-$(imagemagick-version).tar.xz \ +$(ibidir)/imagemagick: $(ibidir)/zlib \ $(ibidir)/libjpeg \ $(ibidir)/libtiff \ - $(ibidir)/zlib - $(call gbuild, $<, ImageMagick-$(imagemagick-version), static, \ + | $(tdir)/imagemagick-$(imagemagick-version).tar.xz + $(call gbuild, ImageMagick-$(imagemagick-version), static, \ --without-x --disable-openmp, V=1 -j$(numthreads)) \ && echo "ImageMagick $(imagemagick-version)" > $@ @@ -862,15 +868,17 @@ $(ibidir)/imagemagick: $(tdir)/imagemagick-$(imagemagick-version).tar.xz \ # by `$(idir)'. After that, each compiled program (`imfit', `imfit-mcmc' # and `makeimage') is copied into the installation directory and an `rpath' # is added. -$(ibidir)/imfit: $(tdir)/imfit-$(imfit-version).tar.gz \ - $(ibidir)/cfitsio \ - $(ibidir)/scons \ +$(ibidir)/imfit: $(ibidir)/gsl \ $(ibidir)/fftw \ - $(ibidir)/gsl + $(ibidir)/scons \ + $(ibidir)/cfitsio \ + | $(tdir)/imfit-$(imfit-version).tar.gz cd $(ddir) \ && unpackdir=imfit-$(imfit-version) \ && rm -rf $$unpackdir \ - && if ! tar xf $<; then echo; echo "Tar error"; exit 1; fi \ + && if ! tar xf $(word 1,$(filter $(tdir)/%,$|)); then \ + echo; echo "Tar error"; exit 1; \ + fi \ && cd $$unpackdir \ && sed -i 's|/usr/local|$(idir)|g' SConstruct \ && sed -i 's|/usr/include|$(idir)/include|g' SConstruct \ @@ -903,12 +911,12 @@ $(ibidir)/imfit: $(tdir)/imfit-$(imfit-version).tar.gz \ # ask to the user. We give all answers with a pipe to the scripts (configure # and install). The questions are different depending on the system (tested # on GNU/Linux and Mac OS). -$(ibidir)/netpbm: $(tdir)/netpbm-$(netpbm-version).tar.gz \ +$(ibidir)/netpbm: $(ibidir)/unzip \ + $(ibidir)/libpng \ $(ibidir)/libjpeg \ $(ibidir)/libtiff \ $(ibidir)/libxml2 \ - $(ibidir)/libpng \ - $(ibidir)/unzip + | $(tdir)/netpbm-$(netpbm-version).tar.gz if [ x$(on_mac_os) = xyes ]; then \ answers='\n\n$(ildir)\n\n\n\n\n\n$(ildir)/include\n\n$(ildir)/include\n\n$(ildir)/include\nnone\n\n'; \ else \ @@ -917,7 +925,9 @@ $(ibidir)/netpbm: $(tdir)/netpbm-$(netpbm-version).tar.gz \ cd $(ddir) \ && unpackdir=netpbm-$(netpbm-version) \ && rm -rf $$unpackdir \ - && if ! tar xf $<; then echo; echo "Tar error"; exit 1; fi \ + && if ! tar xf $(word 1,$(filter $(tdir)/%,$|)); then \ + echo; echo "Tar error"; exit 1; \ + fi \ && cd $$unpackdir \ && printf "$$answers" | ./configure \ && make \ @@ -934,11 +944,11 @@ $(ibidir)/netpbm: $(tdir)/netpbm-$(netpbm-version).tar.gz \ # libraries that are not yet solved. However, we tried to install it with # the option --enable-openblas and it worked (same issue happened with # `sextractor'. -$(ibidir)/scamp: $(tdir)/scamp-$(scamp-version).tar.lz \ - $(ibidir)/cdsclient \ +$(ibidir)/scamp: $(ibidir)/fftw \ $(ibidir)/openblas \ - $(ibidir)/fftw - $(call gbuild, $<, scamp-$(scamp-version), static, \ + $(ibidir)/cdsclient \ + | $(tdir)/scamp-$(scamp-version).tar.lz + $(call gbuild, scamp-$(scamp-version), static, \ --enable-threads --enable-openblas \ --with-fftw-libdir=$(idir) \ --with-fftw-incdir=$(idir)/include \ @@ -949,12 +959,14 @@ $(ibidir)/scamp: $(tdir)/scamp-$(scamp-version).tar.lz \ # Since `scons' doesn't use the traditional GNU installation with # `configure' and `make' it is installed manually using `python'. -$(ibidir)/scons: $(tdir)/scons-$(scons-version).tar.gz \ - $(ibidir)/python +$(ibidir)/scons: | $(ibidir)/python \ + $(tdir)/scons-$(scons-version).tar.gz cd $(ddir) \ && unpackdir=scons-$(scons-version) \ && rm -rf $$unpackdir \ - && if ! tar xf $<; then echo; echo "Tar error"; exit 1; fi \ + && if ! tar xf $(word 1,$(filter $(tdir)/%,$|)); then \ + echo; echo "Tar error"; exit 1; \ + fi \ && cd $$unpackdir \ && python setup.py install \ && echo "SCons $(scons-version)" > $@ @@ -963,10 +975,10 @@ $(ibidir)/scons: $(tdir)/scons-$(scons-version).tar.gz \ # libraries. But we can override this issue since we have Openblas # installed, it is just necessary to explicity tell sextractor to use it in # the configuration step. -$(ibidir)/sextractor: $(tdir)/sextractor-$(sextractor-version).tar.lz \ +$(ibidir)/sextractor: $(ibidir)/fftw \ $(ibidir)/openblas \ - $(ibidir)/fftw - $(call gbuild, $<, sextractor-$(sextractor-version), static, \ + | $(tdir)/sextractor-$(sextractor-version).tar.lz + $(call gbuild, sextractor-$(sextractor-version), static, \ --enable-threads --enable-openblas \ --with-openblas-libdir=$(ildir) \ --with-openblas-incdir=$(idir)/include) \ @@ -974,18 +986,18 @@ $(ibidir)/sextractor: $(tdir)/sextractor-$(sextractor-version).tar.lz \ && cp $(dtexdir)/sextractor.tex $(ictdir)/ \ && echo "SExtractor $(sextractor-version) \citep{sextractor}" > $@ -$(ibidir)/swarp: $(tdir)/swarp-$(swarp-version).tar.gz \ - $(ibidir)/fftw - $(call gbuild, $<, swarp-$(swarp-version), static, \ +$(ibidir)/swarp: $(ibidir)/fftw \ + | $(tdir)/swarp-$(swarp-version).tar.gz + $(call gbuild, swarp-$(swarp-version), static, \ --enable-threads) \ && cp $(dtexdir)/swarp.tex $(ictdir)/ \ && echo "SWarp $(swarp-version) \citep{swarp}" > $@ -$(ibidir)/swig: $(tdir)/swig-$(swig-version).tar.gz +$(ibidir)/swig: | $(tdir)/swig-$(swig-version).tar.gz # Option --without-pcre was a suggestion once the configure step # was tried and it failed. It was not recommended but it works! # pcr is a dependency of swig - $(call gbuild, $<, swig-$(swig-version), static, --without-pcre) \ + $(call gbuild, swig-$(swig-version), static, --without-pcre) \ && echo "Swig $(swig-version)" > $@ @@ -1015,8 +1027,8 @@ $(ibidir)/swig: $(tdir)/swig-$(swig-version).tar.gz tlmirror=http://mirrors.rit.edu/CTAN/systems/texlive/tlnet # The core TeX Live system. -$(itidir)/texlive-ready-tlmgr: $(tdir)/install-tl-unx.tar.gz \ - reproduce/software/config/installation/texlive.conf +$(itidir)/texlive-ready-tlmgr: reproduce/software/config/installation/texlive.conf \ + | $(tdir)/install-tl-unx.tar.gz # Unpack, enter the directory, and install based on the given # configuration (prerequisite of this rule). diff --git a/reproduce/software/make/python.mk b/reproduce/software/make/python.mk index 9b107f0..ce0c974 100644 --- a/reproduce/software/make/python.mk +++ b/reproduce/software/make/python.mk @@ -131,7 +131,7 @@ $(pytarballs): $(tdir)/%: # a number or dash in their name), we need special consideration # because the tokenization above will produce `python' as the # first string. - if [ $* = python-dateutil-$(python-dateutil-version).tar.gz ]; then + @if [ $* = python-dateutil-$(python-dateutil-version).tar.gz ]; then n=dateutil elif [ $* = h5py-$(h5py-version).tar.gz ]; then n=h5py @@ -264,8 +264,10 @@ $(pytarballs): $(tdir)/%: # controlled `sha512sum' build (as part of GNU Coreutils). So we # don't need to check its existance like `basic.mk'. checksum=$$(sha512sum "$@.unchecked" | awk '{print $$1}') - if [ x"$$checksum" = x"$$c" ]; then mv "$@.unchecked" "$@" - else echo "ERROR: Non-matching checksum for '$*'." + if [ x"$$checksum" = x"$$c" ]; then + mv "$@.unchecked" "$@" + else + echo "ERROR: Non-matching checksum for '$*'." echo "Checksum should be: $$c" echo "Checksum is: $$checksum" exit 1 @@ -280,14 +282,14 @@ $(pytarballs): $(tdir)/%: # # While this Makefile is for Python programs, in some cases, we need # certain programs (like Python itself), or libraries for the modules. -$(ibidir)/libffi: $(tdir)/libffi-$(libffi-version).tar.gz +$(ibidir)/libffi: | $(tdir)/libffi-$(libffi-version).tar.gz # On some Fedora systems, libffi installs in `lib64', not # `lib'. This will cause problems when building setuptools # later. To fix this problem, we'll first check if this has indeed # happened (it exists under `lib64', but not under `lib'). If so, # we'll put a copy of the installed libffi libraries in `lib'. - $(call gbuild, $<, libffi-$(libffi-version), , \ + $(call gbuild, libffi-$(libffi-version), , \ CFLAGS="-DNO_JAVA_RAW_API=1") \ && if [ -f $(idir)/lib64/libffi.a ] \ && ! [ -f $(idir)/lib/libffi.a ]; then \ @@ -296,21 +298,21 @@ $(ibidir)/libffi: $(tdir)/libffi-$(libffi-version).tar.gz && echo "Libffi $(libffi-version)" > $@ $(ibidir)/python: $(ibidir)/libffi \ - $(tdir)/python-$(python-version).tar.gz + | $(tdir)/python-$(python-version).tar.gz # On Mac systems, the build complains about `clang' specific # features, so we can't use our own GCC build here. + echo "HEREKJRE"; \ if [ x$(on_mac_os) = xyes ]; then \ export CC=clang; \ export CXX=clang++; \ - fi; \ - $(call gbuild, $(filter $(tdir)/%,$^), \ - Python-$(python-version),, \ + fi; echo; echo "$@: HERE"; echo;\ + $(call gbuild, Python-$(python-version),, \ --without-ensurepip \ --with-system-ffi \ --enable-shared) \ && ln -sf $(ildir)/python$(python-major-version) $(ildir)/python \ && ln -sf $(ibdir)/python$(python-major-version) $(ibdir)/python \ - && ln -sf $(iidir)/python$(python-major-version)m $(iidir)/python(python-major-version) \ + && ln -sf $(iidir)/python$(python-major-version)m $(iidir)/python$(python-major-version) \ && rm -rf $(ipydir) \ && mkdir $(ipydir) \ && echo "Python $(python-version)" > $@ @@ -323,7 +325,10 @@ $(ibidir)/python: $(ibidir)/libffi \ # ---------------------------------- # # To build Python packages with direct access to a `setup.py' (if no direct -# access to `setup.py' is needed, pip can be used). +# access to `setup.py' is needed, pip can be used). Note that the +# software's packaged source code is the first prerequisite that is in the +# `tdir' directory. +# # Arguments of this function are the numbers # 1) Unpack command # 2) Unpacked directory name after unpacking the tarball @@ -331,7 +336,7 @@ $(ibidir)/python: $(ibidir)/libffi \ # 4) Official software name (for paper). # 5) Manual step after installation. pybuild = cd $(ddir); rm -rf $(2); \ - if ! $(1) $(filter $(tdir)/%,$^); then \ + if ! $(1) $(word 1,$(filter $(tdir)/%,$|)); then \ echo; echo "Tar error"; exit 1; \ fi; \ cd $(2); \ @@ -358,12 +363,12 @@ pybuild = cd $(ddir); rm -rf $(2); \ # # All the necessary Python modules go here. $(ipydir)/asn1crypto: $(ipydir)/setuptools \ - $(tdir)/asn1crypto-$(asn1crypto-version).tar.gz \ + | $(tdir)/asn1crypto-$(asn1crypto-version).tar.gz $(call pybuild, tar xf, asn1crypto-$(asn1crypto-version), , \ Asn1crypto $(asn1crypto-version)) $(ipydir)/asteval: $(ipydir)/numpy \ - $(tdir)/asteval-$(asteval-version).tar.gz + | $(tdir)/asteval-$(asteval-version).tar.gz $(call pybuild, tar xf, asteval-$(asteval-version), , \ ASTEVAL $(asteval-version)) @@ -373,41 +378,41 @@ $(ipydir)/astroquery: $(ipydir)/numpy \ $(ipydir)/html5lib \ $(ipydir)/requests \ $(ipydir)/beautifulsoup4 \ - $(tdir)/astroquery-$(astroquery-version).tar.gz + | $(tdir)/astroquery-$(astroquery-version).tar.gz $(call pybuild, tar xf, astroquery-$(astroquery-version), ,\ Astroquery $(astroquery-version)) $(ipydir)/astropy: $(ipydir)/h5py \ $(ipydir)/scipy \ $(ipydir)/numpy \ - $(tdir)/astropy-$(astropy-version).tar.gz + | $(tdir)/astropy-$(astropy-version).tar.gz $(call pybuild, tar xf, astropy-$(astropy-version)) \ && cp $(dtexdir)/astropy.tex $(ictdir)/ \ && echo "Astropy $(astropy-version) \citep{astropy2013,astropy2018}" > $@ $(ipydir)/beautifulsoup4: $(ipydir)/soupsieve \ - $(tdir)/beautifulsoup4-$(beautifulsoup4-version).tar.gz + | $(tdir)/beautifulsoup4-$(beautifulsoup4-version).tar.gz $(call pybuild, tar xf, beautifulsoup4-$(beautifulsoup4-version), ,\ BeautifulSoup $(beautifulsoup4-version)) $(ipydir)/certifi: $(ipydir)/setuptools \ - $(tdir)/certifi-$(certifi-version).tar.gz + | $(tdir)/certifi-$(certifi-version).tar.gz $(call pybuild, tar xf, certifi-$(certifi-version), ,\ Certifi $(certifi-version)) $(ipydir)/cffi: $(ibidir)/libffi \ $(ipydir)/pycparser \ - $(tdir)/cffi-$(cffi-version).tar.gz + | $(tdir)/cffi-$(cffi-version).tar.gz $(call pybuild, tar xf, cffi-$(cffi-version), ,\ cffi $(cffi-version)) $(ipydir)/chardet: $(ipydir)/setuptools \ - $(tdir)/chardet-$(chardet-version).tar.gz + | $(tdir)/chardet-$(chardet-version).tar.gz $(call pybuild, tar xf, chardet-$(chardet-version), ,\ Chardet $(chardet-version)) $(ipydir)/corner: $(ipydir)/matplotlib \ - $(tdir)/corner-$(corner-version).tar.gz + | $(tdir)/corner-$(corner-version).tar.gz $(call pybuild, tar xf, corner-$(corner-version), ,\ Corner $(corner-version)) \ && cp $(dtexdir)/corner.tex $(ictdir)/ \ @@ -415,50 +420,50 @@ $(ipydir)/corner: $(ipydir)/matplotlib \ $(ipydir)/cryptography: $(ipydir)/cffi \ $(ipydir)/asn1crypto \ - $(tdir)/cryptography-$(cryptography-version).tar.gz + | $(tdir)/cryptography-$(cryptography-version).tar.gz $(call pybuild, tar xf, cryptography-$(cryptography-version), ,\ Cryptography $(cryptography-version)) $(ipydir)/cycler: $(ipydir)/six \ - $(tdir)/cycler-$(cycler-version).tar.gz + | $(tdir)/cycler-$(cycler-version).tar.gz $(call pybuild, tar xf, cycler-$(cycler-version), ,\ Cycler $(cycler-version)) $(ipydir)/cython: $(ipydir)/setuptools \ - $(tdir)/cython-$(cython-version).tar.gz + | $(tdir)/cython-$(cython-version).tar.gz $(call pybuild, tar xf, Cython-$(cython-version)) \ && cp $(dtexdir)/cython.tex $(ictdir)/ \ && echo "Cython $(cython-version) \citep{cython2011}" > $@ $(ipydir)/esutil: $(ipydir)/numpy \ - $(tdir)/esutil-$(esutil-version).tar.gz + | $(tdir)/esutil-$(esutil-version).tar.gz $(call pybuild, tar xf, esutil-$(esutil-version), ,\ esutil $(esutil-version)) $(ipydir)/eigency: $(ibidir)/eigen \ - $(tdir)/eigency-$(eigency-version).tar.gz + | $(tdir)/eigency-$(eigency-version).tar.gz $(call pybuild, tar xf, eigency-$(eigency-version), ,\ eigency $(eigency-version)) $(ipydir)/emcee: $(ipydir)/numpy \ $(ipydir)/setuptools_scm \ - $(tdir)/emcee-$(emcee-version).tar.gz + | $(tdir)/emcee-$(emcee-version).tar.gz $(call pybuild, tar xf, emcee-$(emcee-version), ,\ emcee $(emcee-version)) $(ipydir)/entrypoints: $(ipydir)/setuptools \ - $(tdir)/entrypoints-$(entrypoints-version).tar.gz + | $(tdir)/entrypoints-$(entrypoints-version).tar.gz $(call pybuild, tar xf, entrypoints-$(entrypoints-version), ,\ EntryPoints $(entrypoints-version)) $(ipydir)/flake8: $(ipydir)/pyflakes \ $(ipydir)/pycodestyle \ - $(tdir)/flake8-$(flake8-version).tar.gz + | $(tdir)/flake8-$(flake8-version).tar.gz $(call pybuild, tar xf, flake8-$(flake8-version), ,\ Flake8 $(flake8-version)) $(ipydir)/future: $(ipydir)/setuptools \ - $(tdir)/future-$(future-version).tar.gz + | $(tdir)/future-$(future-version).tar.gz $(call pybuild, tar xf, future-$(future-version), ,\ Future $(future-version)) @@ -467,7 +472,7 @@ $(ipydir)/galsim: $(ipydir)/future \ $(ipydir)/eigency \ $(ipydir)/pybind11 \ $(ipydir)/lsstdesccoord \ - $(tdir)/galsim-$(galsim-version).tar.gz + | $(tdir)/galsim-$(galsim-version).tar.gz $(call pybuild, tar xf, GalSim-$(galsim-version), ,) \ && cp $(dtexdir)/galsim.tex $(ictdir)/ \ && echo "Galsim $(galsim-version) \citep{galsim}" > $@ @@ -478,7 +483,7 @@ $(ipydir)/h5py: $(ipydir)/six \ $(ipydir)/cython \ $(ipydir)/mpi4py \ $(ipydir)/pypkgconfig \ - $(tdir)/h5py-$(h5py-version).tar.gz + | $(tdir)/h5py-$(h5py-version).tar.gz export HDF5_MPI=ON; \ export HDF5_DIR=$(ildir); \ $(call pybuild, tar xf, h5py-$(h5py-version), ,\ @@ -496,29 +501,29 @@ $(ipydir)/healpy: $(ibidir)/healpix $(ipydir)/html5lib: $(ipydir)/six \ $(ipydir)/webencodings \ - $(tdir)/html5lib-$(html5lib-version).tar.gz + | $(tdir)/html5lib-$(html5lib-version).tar.gz $(call pybuild, tar xf, html5lib-$(html5lib-version), ,\ HTML5lib $(html5lib-version)) $(ipydir)/idna: $(ipydir)/setuptools \ - $(tdir)/idna-$(idna-version).tar.gz + | $(tdir)/idna-$(idna-version).tar.gz $(call pybuild, tar xf, idna-$(idna-version), ,\ idna $(idna-version)) $(ipydir)/jeepney: $(ipydir)/setuptools \ - $(tdir)/jeepney-$(jeepney-version).tar.gz \ + | $(tdir)/jeepney-$(jeepney-version).tar.gz \ $(call pybuild, tar xf, jeepney-$(jeepney-version), ,\ Jeepney $(jeepney-version)) $(ipydir)/keyring: $(ipydir)/entrypoints \ $(ipydir)/secretstorage \ $(ipydir)/setuptools_scm \ - $(tdir)/keyring-$(keyring-version).tar.gz + | $(tdir)/keyring-$(keyring-version).tar.gz $(call pybuild, tar xf, keyring-$(keyring-version), ,\ Keyring $(keyring-version)) $(ipydir)/kiwisolver: $(ipydir)/setuptools \ - $(tdir)/kiwisolver-$(kiwisolver-version).tar.gz + | $(tdir)/kiwisolver-$(kiwisolver-version).tar.gz $(call pybuild, tar xf, kiwisolver-$(kiwisolver-version), ,\ Kiwisolver $(kiwisolver-version)) @@ -529,12 +534,12 @@ $(ipydir)/lmfit: $(ipydir)/six \ $(ipydir)/asteval \ $(ipydir)/matplotlib \ $(ipydir)/uncertainties \ - $(tdir)/lmfit-$(lmfit-version).tar.gz + | $(tdir)/lmfit-$(lmfit-version).tar.gz $(call pybuild, tar xf, lmfit-$(lmfit-version), ,\ LMFIT $(lmfit-version)) $(ipydir)/lsstdesccoord: $(ipydir)/setuptools \ - $(tdir)/lsstdesccoord-$(lsstdesccoord-version).tar.gz + | $(tdir)/lsstdesccoord-$(lsstdesccoord-version).tar.gz $(call pybuild, tar xf, LSSTDESC.Coord-$(lsstdesccoord-version), ,\ LSSTDESC.Coord $(lsstdesccoord-version)) @@ -547,27 +552,27 @@ $(ipydir)/matplotlib: $(ipydir)/numpy \ $(ibidir)/ghostscript \ $(ibidir)/imagemagick \ $(ipydir)/python-dateutil \ - $(tdir)/matplotlib-$(matplotlib-version).tar.gz + | $(tdir)/matplotlib-$(matplotlib-version).tar.gz $(call pybuild, tar xf, matplotlib-$(matplotlib-version)) \ && cp $(dtexdir)/matplotlib.tex $(ictdir)/ \ && echo "Matplotlib $(matplotlib-version) \citep{matplotlib2007}" > $@ $(ipydir)/mpi4py: $(ibidir)/openmpi \ $(ipydir)/setuptools \ - $(tdir)/mpi4py-$(mpi4py-version).tar.gz + | $(tdir)/mpi4py-$(mpi4py-version).tar.gz $(call pybuild, tar xf, mpi4py-$(mpi4py-version)) \ && cp $(dtexdir)/mpi4py.tex $(ictdir)/ \ && echo "mpi4py $(mpi4py-version) \citep{mpi4py2011}" > $@ $(ipydir)/mpmath: $(ipydir)/setuptools \ - $(tdir)/mpmath-$(mpmath-version).tar.gz + | $(tdir)/mpmath-$(mpmath-version).tar.gz $(call pybuild, tar xf, mpmath-$(mpmath-version), ,\ mpmath $(mpmath-version)) $(ipydir)/numpy: $(ibidir)/unzip \ $(ibidir)/openblas \ $(ipydir)/setuptools \ - $(tdir)/numpy-$(numpy-version).zip + | $(tdir)/numpy-$(numpy-version).zip if [ x$(on_mac_os) = xyes ]; then \ export LDFLAGS="$(LDFLAGS) -undefined dynamic_lookup -bundle"; \ else \ @@ -580,52 +585,52 @@ $(ipydir)/numpy: $(ibidir)/unzip \ && echo "Numpy $(numpy-version) \citep{numpy2011}" > $@ $(ibidir)/pip3: $(ipydir)/setuptools \ - $(tdir)/pip-$(pip-version).tar.gz + | $(tdir)/pip-$(pip-version).tar.gz $(call pybuild, tar xf, pip-$(pip-version), ,\ PiP $(pip-version)) $(ipydir)/pycodestyle: $(ipydir)/setuptools \ - $(tdir)/pycodestyle-$(pycodestyle-version).tar.gz + | $(tdir)/pycodestyle-$(pycodestyle-version).tar.gz $(call pybuild, tar xf, pycodestyle-$(pycodestyle-version), ,\ pycodestyle $(pycodestyle-version)) $(ipydir)/pybind11: $(ibidir)/eigen \ $(ibidir)/boost \ $(ipydir)/setuptools \ - $(tdir)/pybind11-$(pybind11-version).tar.gz + | $(tdir)/pybind11-$(pybind11-version).tar.gz $(call pybuild, tar xf, pybind11-$(pybind11-version), ,\ pybind11 $(pybind11-version), cp -r include/pybind11 $(iidir)/python$(python-major-version)m/) $(ipydir)/pycparser: $(ipydir)/setuptools \ - $(tdir)/pycparser-$(pycparser-version).tar.gz + | $(tdir)/pycparser-$(pycparser-version).tar.gz $(call pybuild, tar xf, pycparser-$(pycparser-version), ,\ pycparser $(pycparser-version)) $(ipydir)/pyflakes: $(ipydir)/setuptools \ - $(tdir)/pyflakes-$(pyflakes-version).tar.gz + | $(tdir)/pyflakes-$(pyflakes-version).tar.gz $(call pybuild, tar xf, pyflakes-$(pyflakes-version), ,\ pyflakes $(pyflakes-version)) $(ipydir)/pyparsing: $(ipydir)/setuptools \ - $(tdir)/pyparsing-$(pyparsing-version).tar.gz + | $(tdir)/pyparsing-$(pyparsing-version).tar.gz $(call pybuild, tar xf, pyparsing-$(pyparsing-version), ,\ PyParsing $(pyparsing-version)) $(ipydir)/pypkgconfig: $(ipydir)/setuptools \ - $(tdir)/pkgconfig-$(pypkgconfig-version).tar.gz + | $(tdir)/pkgconfig-$(pypkgconfig-version).tar.gz $(call pybuild, tar xf, pkgconfig-$(pypkgconfig-version), , pkgconfig $(pypkgconfig-version)) $(ipydir)/python-dateutil: $(ipydir)/six \ $(ipydir)/setuptools_scm \ - $(tdir)/python-dateutil-$(python-dateutil-version).tar.gz + | $(tdir)/python-dateutil-$(python-dateutil-version).tar.gz $(call pybuild, tar xf, python-dateutil-$(python-dateutil-version), ,\ python-dateutil $(python-dateutil-version)) $(ipydir)/pyyaml: $(ibidir)/yaml \ $(ipydir)/cython \ - $(tdir)/pyyaml-$(pyyaml-version).tar.gz + | $(tdir)/pyyaml-$(pyyaml-version).tar.gz $(call pybuild, tar xf, PyYAML-$(pyyaml-version), ,\ PyYAML $(pyyaml-version)) @@ -634,12 +639,12 @@ $(ipydir)/requests: $(ipydir)/idna \ $(ipydir)/certifi \ $(ipydir)/chardet \ $(ipydir)/urllib3 \ - $(tdir)/requests-$(requests-version).tar.gz + | $(tdir)/requests-$(requests-version).tar.gz $(call pybuild, tar xf, requests-$(requests-version), ,\ Requests $(requests-version)) $(ipydir)/scipy: $(ipydir)/numpy \ - $(tdir)/scipy-$(scipy-version).tar.gz + | $(tdir)/scipy-$(scipy-version).tar.gz if [ x$(on_mac_os) = xyes ]; then \ export LDFLAGS="$(LDFLAGS) -undefined dynamic_lookup -bundle"; \ else \ @@ -652,56 +657,56 @@ $(ipydir)/scipy: $(ipydir)/numpy \ $(ipydir)/secretstorage: $(ipydir)/jeepney \ $(ipydir)/cryptography \ - $(tdir)/secretstorage-$(secretstorage-version).tar.gz + | $(tdir)/secretstorage-$(secretstorage-version).tar.gz $(call pybuild, tar xf, SecretStorage-$(secretstorage-version), ,\ SecretStorage $(secretstorage-version)) $(ipydir)/setuptools: $(ibidir)/unzip \ $(ibidir)/python \ - $(tdir)/setuptools-$(setuptools-version).zip + | $(tdir)/setuptools-$(setuptools-version).zip $(call pybuild, unzip, setuptools-$(setuptools-version), ,\ Setuptools $(setuptools-version)) $(ipydir)/setuptools_scm: $(ipydir)/setuptools \ - $(tdir)/setuptools_scm-$(setuptools_scm-version).tar.gz + | $(tdir)/setuptools_scm-$(setuptools_scm-version).tar.gz $(call pybuild, tar xf, setuptools_scm-$(setuptools_scm-version), ,\ Setuptools-scm $(setuptools_scm-version)) $(ipydir)/sip_tpv: $(ipydir)/sympy \ $(ipydir)/astropy \ - $(tdir)/sip_tpv-$(sip_tpv-version).tar.gz + | $(tdir)/sip_tpv-$(sip_tpv-version).tar.gz $(call pybuild, tar xf, sip_tpv-$(sip_tpv-version), ,) \ && cp $(dtexdir)/sip_tpv.tex $(ictdir)/ \ && echo "sip\_tpv $(sip_tpv-version) \citep{sip-tpv}" > $@ $(ipydir)/six: $(ipydir)/setuptools \ - $(tdir)/six-$(six-version).tar.gz + | $(tdir)/six-$(six-version).tar.gz $(call pybuild, tar xf, six-$(six-version), ,\ Six $(six-version)) $(ipydir)/soupsieve: $(ipydir)/setuptools \ - $(tdir)/soupsieve-$(soupsieve-version).tar.gz + | $(tdir)/soupsieve-$(soupsieve-version).tar.gz $(call pybuild, tar xf, soupsieve-$(soupsieve-version), ,\ SoupSieve $(soupsieve-version)) $(ipydir)/sympy: $(ipydir)/mpmath \ - $(tdir)/sympy-$(sympy-version).tar.gz + | $(tdir)/sympy-$(sympy-version).tar.gz $(call pybuild, tar xf, sympy-$(sympy-version), ,) \ && cp $(dtexdir)/sympy.tex $(ictdir)/ \ && echo "SymPy $(sympy-version) \citep{sympy}" > $@ $(ipydir)/uncertainties: $(ipydir)/numpy \ - $(tdir)/uncertainties-$(uncertainties-version).tar.gz + | $(tdir)/uncertainties-$(uncertainties-version).tar.gz $(call pybuild, tar xf, uncertainties-$(uncertainties-version), ,\ uncertainties $(uncertainties-version)) $(ipydir)/urllib3: $(ipydir)/setuptools \ - $(tdir)/urllib3-$(urllib3-version).tar.gz + | $(tdir)/urllib3-$(urllib3-version).tar.gz $(call pybuild, tar xf, urllib3-$(urllib3-version), ,\ Urllib3 $(urllib3-version)) $(ipydir)/webencodings: $(ipydir)/setuptools \ - $(tdir)/webencodings-$(webencodings-version).tar.gz + | $(tdir)/webencodings-$(webencodings-version).tar.gz $(call pybuild, tar xf, webencodings-$(webencodings-version), ,\ Webencodings $(webencodings-version)) |