aboutsummaryrefslogtreecommitdiff
path: root/reproduce
AgeCommit message (Collapse)AuthorLines
2018-12-03Added rpath in basic dependencies, remove input if download failsMohammad Akhlaghi-4/+8
Until now, we weren't including the `rpath' linking options to the basic dependencies. They are now added. Also, when the download of an input file fails for any reason, an empty file won't be replaced there any more.
2018-12-03Gnuastro's dependencies fully sorted by build timeMohammad Akhlaghi-4/+9
In the previous commit, I forgot to actually add some changes to the staging area before committing an pushing. So some of the changes discussed in the previous commit and now commited.
2018-12-03Gnuastro's dependencies sorted by length of buildMohammad Akhlaghi-1/+1
Make builds the dependencies of each package based on the order in the prerequisites list. So when building in parallel, it can greatly help the over-all build speed if larger packages are built first. Therefore the three larger Gnuastro dependencies are now placed at earlier places of the prerequisites.
2018-12-03Minor typo correction in building CoreutilsMohammad Akhlaghi-1/+1
We were missing a `\' at the end of the `$(call' function of Coreutils to connect the two lines. It has been fixed now.
2018-12-03Trusted CA certificates also downloaded for Wget usageMohammad Akhlaghi-9/+20
To enable easy downloading of HTTPS links with Wget (this pipeline's defaut downloader), we need a set of trusted CA certificates. Until the time that we can generate one ourselves, one generic set of trusted CA certificates is now downloaded like a tarball and placed in the OpenSSL configuration directory. With these CA certificates, within the pipeline we can now safely use the pipeline's own installed Wget.
2018-12-03Preference for shared library linkingMohammad Akhlaghi-46/+81
Some high-level programs like Wget and cURL need to be built in shared mode because they also include dynamic loading of libraries. Therefore, if we only build the lower-level libraries in static mode, our own build will be ignored and they will go and find the system's shared libraries to link with. Because of this, for now, we have manually set the `static_build' variable in the configure script to `no'. Also, if the downloader fails, we'll delete the output (an empty file in the case of Wget) because it interefers with a target definition.
2018-12-02Wget and OpenSSL now installed as a basic dependencyMohammad Akhlaghi-83/+136
The TeX Live installer needs Wget to operate smoothly, especially on recent Mac OS systems that don't have Wget pre-installed. Also, it would be good for the pipeline to have its own downloader. So with this commit, the pipeline also installs Wget and OpenSSL which is a dependency. Many other small changes/fixes were done in this process.
2018-12-01Improved TeXLive installation checksMohammad Akhlaghi-26/+48
Thanks to the check by Cristina Martínez, some corrections were made when we attempt to download and install TeXLive. Further checks and corrections will be in due time.
2018-11-30Downloading TeX Live tarball in general download ruleMohammad Akhlaghi-29/+26
Until now, we were downloading TeX Live's tarball within the same rule that unpacked it. But this causes problems for situations were it cannot be downloaded within the pipeline (and manually placed in the tarball directory). So now, the TeX Live downloader is treated like all the other downloaders.
2018-11-30cURL now also available as downloader with -L flagMohammad Akhlaghi-1/+5
The main reason I wasn't using cURL as a downloading tool was that I wasn't familar with how to ask it to follow a re-direct. But I just found out that its with the `-L' configure time option. So it is now added as a downloader tool to the pipeline.
2018-11-30Setting libgit2 to build statically in any caseMohammad Akhlaghi-2/+11
On the Libgit2 webpage, it has recommended to build it statically on Mac systems. By default we are doing this on Linux systems, but the `-static' flag failed on Mac. But apparently CMake might be able to deal with the issue in a different way.
2018-11-29File is made before calling flock (file locking)Mohammad Akhlaghi-0/+1
While testing on another computer, I noticed that to operate properly, the file given to `flock' must be created before it is called. This is a low-level difference (how the system treats files), so it wasn't apparent on my system. To fix it, we have added a `touch' command before it.
2018-11-29Remove extra lockdir target in download.mkMohammad Akhlaghi-1/+1
There was an extra `$(lockdir)' target in `download.mk'. This has been corrected.
2018-11-29Optional rpath link option, CMake search path set, static WCSLIBMohammad Akhlaghi-8/+9
Thanks to a test build on Raul Infante Sainz's Mac OS computer, we were able to address some issues and will be trying them after this commit: a) The LLVM linker on that computer didn't recognize `-rpath-link'! So at configure time we now check for it and only include it when the linker recognizes it. b) CMake corrections: 1) `CMAKE_LIBRARY_PATH' is now defined so CMake can look in our custom directory to find the necessary libraries. 2) To build and install the CMake built programs, we now simply use `make' and `make install'. c) To avoid particular linking problems with WCSLIB (which has special problems compared to other libraries), we are now deleting the shared library version (both on GNU and Mac systems).
2018-11-29Ignoring building of GCC for pipelineMohammad Akhlaghi-22/+66
GNU Binutils (which provides the GNU Linker) is not ported to Mac OS systems. GCC also takes a very long time to build, and if we are to still have linking problems with LLVM's linker, it would be better to just ignore GCC also and use the system's C compiler and linker together. So for the time being, GCC isn't a main target of the basic dependencies and won't be installed. But we have kept the rules that were checked on a GNU/Linux operating system.
2018-11-29Using proper shell when building programs with GNU toolsMohammad Akhlaghi-2/+9
Previously the SHELL environment variable was only set in `./configure', `make', and `make install' after our internal Bash was installed. This caused problems with Lzip's configure script on older shells (tested on a Mac OS by Raul Infante Sainz). So now, before having our own Bash, we set it to a possibly existing Bash on the system and if that isn't present, just the standard `/bin/sh'.
2018-11-29GCC is now installed by the pipelineMohammad Akhlaghi-73/+160
The pipeline now installs GCC and all its necessary prerequisites.
2018-11-28Changed -rpath to -rpath-link for LLVMMohammad Akhlaghi-1/+7
The linker of LLVM version 10.0.0 (clang-1000.11.45.5) doesn't recognize the `-rpath' linker option! After some searching, apparently it does recognize `-rpath-link' so we are testing with that now.
2018-11-28Better control of shared library linkingMohammad Akhlaghi-31/+54
Until now we weren't explicity writing the full path of the dynamic libraries necessary for linking a program. But now with `-Wl,-rpath=$(ildir)' we ensure that the linker keeps the address of the dynamic libraries necessary for linking at linking time, not running time. Also, `pkg-config' is also built when preparing the basics. Several other minor corrections were made thanks to the great help of Raúl Infante Sainz.
2018-11-26Making lock file directoryMohammad Akhlaghi-2/+2
We had forgot to add the rule to build the lock file directory for downloading data. This has been corrected.
2018-11-26High-level dependencies build without system's PATHMohammad Akhlaghi-66/+129
The high-level dependencies are now built without having access to the system's PATH. To do this, all the necessary software that we aren't building ourselves are now brought into the installed `bin/' directory using a symbolic link to the corresponding software on the host. To do this, it was also necessary to increase the number of basic/low-level packages that we are building, and add several more (Diffutils and Findutils). With this process in place, we now have a list of the exact software packages that we are not building our selves, enabling easy building of all such dependencies in the future.
2018-11-26sh executable now available in PATHMohammad Akhlaghi-1/+16
While working on a research project using this pipeline, I noticed that we don't have any `sh' executable within our PATH. However, some programs (including Gnuastro's configure script, when it is checking for shells to use with Libtool) check and use it. So after building Bash, we also build an `sh' symbolic link to point to the built Bash executable.
2018-11-25Rule of tex/pipeline.tex now defined in paper.mk not top MakefileMohammad Akhlaghi-122/+143
To avoid redundant steps in the the top-level Makefile and make it simpler and easier to follow, we now define the base names of all the Makefiles in the `makesrc' variable of the top-level Makefile. `makesrc' is then used to define the Makefiles to include and the necessary TeX macros at the same time. This is much more clear and obvious than the previous case were we had to list the Makefiles and TeX macro files separately in the top level Makefile.
2018-11-25More generic naming conventionMohammad Akhlaghi-58/+33
Until now, we were keeping the input file within the reproduction pipeline's directories using the same name as the database/server. Now, we are using a short/summarized filename convention for the input dataset.
2018-11-25Pipeline now downloads and uses an input datasetMohammad Akhlaghi-24/+207
In most analysis situations (except for simulations), an input dataset is necessary, but that part of the pipeline was just left out and a general `SURVEY' variable was set and never used. So with this commit, we actually use a sample FITS file from the FITS standard webpage, show it (as well as its histogram) and do some basic calculations on it. This preparation of the input datasets is done in a generic way to enable easy addition of more datasets if necessary.
2018-11-22Ghostscript was updated to version 9.26Mohammad Akhlaghi-2/+2
A new version of the ghostscript package is now available, so the used version in the pipeline (previously 9.25) has been incremented to 9.26.
2018-11-21Changing of README files in checklistMohammad Akhlaghi-1/+0
When you point to this project, the `README.md' file is the default file that opens on GitLab and other online git repositories. Since a reproduction pipeline project is different from the actual pipeline, its best for the default text that opens to describe the paper, not the pipeline. The old `README.md' is also kept, but its now called `REAME-pipeline.md'.
2018-11-20Configure script passes if TeX Live was not finalizedMohammad Akhlaghi-82/+116
When there is a problem in creating the final TeX Live installation, the previous version of the pipeline would not understand and just finish! We would later have problems in building the paper. So the following series of steps were taken: to keep the recipes in a shorter and easier to understand way, the steps to install TeX Live are now one rule (that produce `.local/bin/texlive-ready-tlmgr' when its successful), and the steps to install the necessary packages are in another rule (that produce `.local/bin/texlive-ready' when its successful). When control comes back inside configure, if `.local/bin/texlive-ready' isn't there (something failed during the TeX Live installation, or building packages), then the whole TeX Live installation directory (`.local/texlive') will be deleted along with the two output files. This will help ensure that future steps can check the availablility of a working TeX Live in the pipeline.
2018-11-20Not including system's libraries in high-level dependenciesMohammad Akhlaghi-5/+8
The system's libraries are no longer used in building the higher-level dependencies. Also, thanks to Raul Infante Sainz, we found out that Bash's build script was still removing the extra directory information (not good!).
2018-11-20GNU Coreutils now built in basic dependenciesMohammad Akhlaghi-48/+46
GNU Coreutils are basic programs that can help in the configuration of higher-level programs. Because of that, it was a dependency of almost all software built in `dependencies.mk'. To make things more clear, easier to read and faster (when building in parallel), the building of Coreutils is now moved to the `dependencies-basic.mk' rules. There, it is built along-side Bash. Since `dependenceis-basic.mk' is run and completed before `dependencies.mk', with this, we can be sure that Coreutils is present by the time we want to build the higher-level programs. Also, Zlib is now added as a dependency of Git also (it is necessary for its build).
2018-11-19Libtool set as Gnuastro dependencyMohammad Akhlaghi-2/+3
Until now, we were building Libtool as a high-level `top-level-programs' software. But all tools that use the `./configure' script already have a version of Libtool in them. So ultimately the `libtool' in the PATH is not used. However, in the case of Gnuastro, we need libtool for running BulidProgram. So in effect, its a dependency of Gnuastro.
2018-11-19Removed GNU Binutils, CMake's built with its own bootstrapMohammad Akhlaghi-113/+118
When the C compiler is not GNU GCC, linking with GNU Binutils is going to cause problems. So until the time that we can include GCC into this pipeline, its best to avoid Binutils also. Also, for building CMake, we were relying on an installed CMake, but now, we are using its own `./bootstrap' script, so it can be built even if the host system doesn't have CMake. Also, for TeX Live, we are now setting a custom file as main target to avoid complications with symbolic links as targets in Make. Finally, when the user says they don't want to re-write an existing configuration file, no extra notices will be printed and the configure script will immediately start building programs.
2018-11-19Minor corrections for easy applying of checklistMohammad Akhlaghi-4/+8
After going through the checklist for starting a new project based on the pipeline, I noticed some parts that could be modified to be more clear. They are now applied.
2018-11-19Gzip's tarball in tar.gz instead of tar.lzMohammad Akhlaghi-27/+27
Until now, we were using a customized `tar.lz' tarball for Gzip. But on systems that don't have GNU Tar, this will cause a problem (non-GNU Tar doesn't recognize `.tar.lz'). So to keep things simple, we are using the customized gzip in `tar.gz' format. After the internal build of GNU Tar and Lzip, the default method of unpacking (`tar xf XXXXX.tar.XX') will work nicely on all the standard compression algorithms and we don't have to modify our commands based on the algorithm (nice feature of GNU Tar).
2018-11-18Updated README and README.md for new dependency building featuresMohammad Akhlaghi-1/+1
The two README files have been updated to explain the new feature of downloading and building dependencies.
2018-11-18Pipeline also installs TeX live and necessary packagesMohammad Akhlaghi-36/+117
Since the final product of the pipeline is a LaTeX-created PDF file, it was necessary to also have LaTeX within the pipeline. With this commit, TeX Live is also built as part of the configuration and all the necessary packages to build the PDF are also installed and mentioned in the paper along with their versions.
2018-11-17TeX Live also built within the pipeline (no extra packages yet)Mohammad Akhlaghi-12/+60
TeX Live is now also downloaded and built by the reproduction pipeline. Currently on the basic (TeX and LaTeX) source is built but no extra packages, so the PDF building will fail. We'll add them in the next commit.
2018-11-16Minor correction in shell's if statementMohammad Akhlaghi-2/+2
If the Makefile `$(static_build)' variable in '/reproduce/src/make/dependencies-build-rules.mk' isn't defined (by mistake), it will default to blank space, then the Shell will complain about a bad formatted operator (needing two operands). So an `x' was added before it and before `yes' which will allow us to safely pass such cases without a terrible crash.
2018-11-16Configure script checks if static libraries will be builtMohammad Akhlaghi-4/+53
The default Mac compiler has problems building static libraries. Since we are not yet building the GNU C Compiler as part of the pipeline, we'll have to rely on the host system's compiler. Therefore, a check is now added a the start of the configure script that will build a minimal program with the `-static' flag and if it fails, it will print a warning. Afterwards, none of the dependencies will be built with the `-static' flag.
2018-11-15Fixed small typo (missed a semi-colon)Mohammad Akhlaghi-2/+2
A semi-colon was missed in defining the link for `zlib'. It is now added.
2018-11-15Binutils and other compressors also included in pipelineMohammad Akhlaghi-68/+151
To have better control over the build, GNU Binutils, Bzip2, GNU Gzip, and XZ Utils have also been added to the pipeline. Some other minor cleanups and fixes were also implemented throughout the process.
2018-11-15Static linking flag added to LDFLAGS, using special Bash scriptMohammad Akhlaghi-23/+22
Until now, when a package was to be built statically, we were adding the `--static' option to `CFLAGS'. This was the wrong place to put it! It should be in the linking step (thus `LDFLAGS'). Also, based on Bash's configure script, we are now using the more generic form of `-static' (single dash, not double dash). On the other hand, the `--disable-shared' option isn't available in many of the packages and it is highly redundant with the `-static' option, so it has been removed to avoid an extra warning in such packages.
2018-11-14Lzip and Tar also built as basic dependenciesMohammad Akhlaghi-74/+90
To ensure the easy unpacking and building of the programs, Lzip and Tar are now also build during the initial setup phase. Some minor corrections were also applied to make things cleaner and smoother.
2018-11-14Configuration stops if a dependency cannot be builtMohammad Akhlaghi-43/+87
Until now, we used semicolons in Make's Call function definitions to build the programs with GNU build system or CMake. Therefore, if any step of the process failed, the rest would be ignorant to it and pass. Now, we use `&&' to separate the different processing steps. In this way, we can be sure that if any of them fails (during configuration, or building for example), the pipeline will also stop and not continue to the next command (in the same recipe). Since the two Make Call functions were identical in the two `dependencies-basic.mk' and `dependencies.mk', they are now in one file to be imported in both. This bug was found by Raul Infante Sainz.
2018-11-14./configure and building of Bash and Make with more basic toolsMohammad Akhlaghi-119/+136
After a test by Raúl Infante Sainz, we found out that the configure script and the Make script for Bash and Make are making too many assumptions on more recent versions of both. As a result, it couldn't be built. Therefore, the `configure' script was modified to not use more recent tools like `readlink' (to find the absolute address of a relative one). It was also re-organized to not have to read the configuration parameters from a text file. The parameters are directly read from the command-line and are written into the proper file afterwards. This removes the need to opening a text editor by the user (which also caused problems on Raúl's system). To fix the Make version issue, the building of Bash and Make are now done in a new Makefile (`reproduce/src/make/dependencies-basic.mk'). This file doesn't make many of the assumptions that were made in `dependencies.mk'. So it should hopefully work on any version of Make. To help in debugging, for now, the Makefile of configure, are asked to work on one thread (the `-j' option is commented in the `configure'). But after checks, we'll fix this.
2018-11-13Most library versions are now also checkedMohammad Akhlaghi-52/+89
All the libraries that define their version string as a macro in their headers are now also checked in `reproduce/src/make/initialize.mk'. Also, the CFITSIO tarball now follows the same versioning style as the rest of the tarballs: a script is added to convert the version string into what is included in the tarball.
2018-11-13Version of programs checked on each run of pipelineMohammad Akhlaghi-17/+41
The version of all programs is now checked in `reproduce/make/src/initialize.mk' and the pipeline won't complete if any of the program versions change from those listed in `reproduce/config/pipeline/dependency-versions.mk'. Since the pipeline is systematically checking all program versions, we don't need Gnuastro's `--onlyversion' option any more. So it (and all references to it) have been removed.
2018-11-12System's environment (including PATH) only available for LaTeXMohammad Akhlaghi-5/+12
The system's environment is now removed from the internal processing of the pipeline, except for LaTeX.
2018-11-12Corrected CFITSIO building recipeMohammad Akhlaghi-1/+1
We were mistakenly using GSL's name for the unpacked tarball.
2018-11-12Libcurl, Git, CMake, TIFF, Zlib also built at configure timeMohammad Akhlaghi-110/+168
During the configuration step several new programs that were necessary for a more complete controlled environment are now also downloaded and built statically.