| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
Less is rarely used in non-interactive mode and is primarily intended for
interactively viewing large files. So its need within Maneage (for batch
processing) wasn't often felt until now. However, when running './project
shell' (which completely closes-off the outside environment), or building a
Maneage'd project within a minimal container that doesn't have less, it
becomes hard to use Git (and in particular its 'diff' output which depends
on 'less').
With this commit, Less has been added as a dependency of Git in
'basic.mk'. In total its built product is roughly 800KB and builds within a
second or two. So it isn't a burden on any project. But it can be very
useful when the projects are being developed within the Maneage environment
itself.
|
|
After a fresh build of Maneage with a newly downloaded TeXLive, I noticed
that it is complaining about not finding 'xstring.sty', apparently some
package that depeneded on it is no longer including it itself!
It is thus now added to the packages that are built by Maneage's TeXLive.
|
|
While a project is under development, the raw analysis software are not the
only necessary software in a project. We also need tools to all the edit
plain-text files within the Maneaged project. Usually people use their
operating system's plain-text editor. However, when working on the project
on a new computer, or in a container, the plain-text editors will have
different versions, or may not be present at all! This can be very annoying
and frustrating!
With this commit, Maneage now installs GNU Nano as part of the basic
tools. GNU Nano is a very simple and small plain text editor (the installed
size is only ~3.5MB, and it is friendly to new users). Therefore, any
Maneaged project can assume atleast Nano will be present (in particular
when no editor is available on the running system!). GNU Emacs and VIM
(both without extra dependencies, in particular without GUI support) are
also optionally available in 'high-level.mk' (by adding them to
'TARGETS.conf').
The basic idea for the more advanced editors (Emacs and VIM) is that
project authors can add their favorite editor while they are working on the
project, but upon publication they can remove them from 'TARGETS.conf'.
A few other minor things came up during this work and are now also fixed:
- The 'file' program and its libraries like 'libmagic' were linking to
system's 'libseccomp'! This dependency then leaked into Nano (which
depends on 'libmagic'). But this is just an extra feature of 'file',
only for the Linux kernel. Also, we have no dependency on it so far. So
'file' is not configured to not build with 'libseccomp'.
- A typo was fixed in the line where the physical core information is
being read on macOS.
- The top-level directories when running './project shell' are now quoted
(in case they have special characters).
|
|
It was a long time that the Maneage software versions hadn't been updated.
With this commit, the versions of all basic software were checked and 17 of
that had newer versions were updated. Also, 16 high-level programs and
libraries were updated as well as 7 Python modules. The full list is
available below.
Basic Software (affecting all projects)
---------------------------------------
bash 5.0.11 -> 5.0.18
binutils 2.32 -> 2.35
coreutils 8.31 -> 8.32
curl 7.65.3 -> 7.71.1
file 5.36 -> 5.39
gawk 5.0.1 -> 5.1.0
gcc 9.2.0 -> 10.2.0
gettext 0.20.2 -> 0.21
git 2.26.2 -> 2.28.0
gmp 6.1.2 -> 6.2.0
grep 3.3 -> 3.4
libbsd 0.9.1 -> 0.10.0
ncurses 6.1 -> 6.2
perl 5.30.0 -> 5.32.0
sed 4.7 -> 4.8
texinfo 6.6 -> 6.7
xz 5.2.4 -> 5.2.5
Custom programs/libraries
-------------------------
astrometrynet 0.77 -> 0.80
automake 0.16.1 -> 0.16.2
bison 3.6 -> 3.7
cfitsio 3.47 -> 3.48
cmake 3.17.0 -> 3.18.1
freetype 2.9 -> 2.10.2
gdb 8.3 -> 9.2
ghostscript 9.50 -> 9.52
gnuastro 0.11 -> 0.12
libgit2 0.28.2 -> 1.0.1
libidn 1.35 -> 1.36
openmpi 4.0.1 -> 4.0.4
R 3.6.2 -> 4.0.2
python 3.7.4 -> 3.8.5
wcslib 6.4 -> 7.3
yaml 0.2.2 -> 0.2.5
Python modules
--------------
cython 0.29.6 -> 0.29.21
h5py 2.9.0 -> 2.10.0
matplotlib 3.1.1 -> 3.3.0
mpi4py 3.0.2 -> 3.0.3
numpy 1.17.2 -> 1.19.1
pybind11 2.4.3 -> 2.5.0
scipy 1.3.1 -> 1.5.2
|
|
Until now, in order to build Ghostscript, the project used the host's Xorg
libraries. This was because we hadn't yet added the necessary build rules
for them.
With this commit, the instructions to build the necessary Xorg libraries
for Ghostscript have also been added. Also, the shared Ghostscript library
has been built with this commit and two sets of standard fonts are also
included, setting us on the path to build TeXLive from source later.
This task was done with the help and support of Raul Infante-Sainz.
|
|
Until this commit, there was a problem when building Bison in parallel in
macOS systems. With this commit, this problem has been fixed by updating
Bison to its most recent version (3.6).
|
|
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause
conflicts to your project if you have changed the software building
Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and
'python.mk'). If your project has only added analysis, it shouldn't be
affected.
This is a large commit, involving a long series of corrections in a
differnt branch which is now finally being merged into the core Maneage
branch. All changes were related and came up naturally as the low-level
infrastructure was improved. So separating them in the end for the final
merge would have been very time consuming and we are merging them as one
commit.
In general, the software building Makefiles are now much more easier to
read, modify and use, along with several new features that have been
added. See below for the full list.
- Until now, Maneage needed the host to have a 'make' implementation
because Make was necessary to build Lzip. Lzip is then used to
uncompress the source of our own GNU Make. However, in the
minimalist/slim versions of operating systems (for example used to build
Docker images) Make isn't included by default. Since Lzip was the only
program before our own GNU Make was installed, we consulting Antonio
Diaz Diaz (creator of Lzip) and he kindly added the necessary
functionality to a new version of Lzip, which we are using now. Hence we
don't need to assume a Make implementation on the host any more. With
this commit, Lzip and GNU Make are built without Make, allowing
everything else to be safely built with our own custom version of GNU
Make and not using the host's 'make' at all.
- Until recently (Commit 3d8aa5953c4) GNU Make was built in
'basic.mk'. Therefore 'basic.mk' was written in a way that it can be
used with other 'make' implementations also (i.e., important shell
commands starting with '&&' and ending in '\' without any comments
between them!). Furthermore, to help in style uniformity, the rules in
'high-level.mk' and 'python.mk' also followed a similar structure. But
due to the point above, we can now guarantee that GNU Make is used from
the very first Makefile, so this hard-to-read structure has been removed
in the software build recipes and they are much more readable and
edit-friendly now.
- Until now, the default backup servers where at some fixed URLs, on our
own pages or on Gitlab. But recently we uploaded all the necessary
software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is
more suitable for this task (it promises longevity, has a fixed DOI,
while allowing us to add new content, or new software tarball
versions). With this commit, a small script has been written to extract
the most recent Zenodo upload link from the Zenodo DOI and use it for
downloading the software source codes.
- Until now, we primarily used the webpage of each software for
downloading its tarball. But this caused many problems: 1) Some of them
needed Javascript before the download, 2) Some URLs had a complex
dependency on the version number, 3) some servers would be randomly down
for maintenance and etc. So thanks to the point above, we now use the
Zenodo server as the primary download location. However, if a user wants
to use a custom software that is not (yet!) in Zenodo, the download
script gives priority to a custom URL that the users can give as Make
variables. If that variable is defined, then the script will use that
URL before going onto Zenodo. We now have a special place for such URLs:
'reproduce/software/config/urls.conf'. The old URLs (which are a good
documentation themselves) are preserved here, but are commented by
default.
- The software source code downloading and checksum verification step has
been moved into a Make function called 'import-source' (defined in the
'build-rules.mk' and loaded in all software Makefiles). Having taken all
the low-level steps there, I noticed that there is no more need for
having the tarball as a separate target! So with this commit, a single
rule is the only place that needs to be edited/added (greatly
simplifying the software building Makefiles).
- Following task #15272, A new option has been added to the './project'
script called '--all-highlevel'. When this option is given, the contents
of 'TARGETS.conf' are ignored and all the software in Maneage are built
(selected by parsing the 'versions.conf' file). This new option was
added to confirm the extensive changes made in all the software building
recipes and is great for development/testing purposes.
- Many of the software hadn't been tested for a long time! So after using
the newly added '--all-highlevel', we noticed that some need to be
updated. In general, with this commit, 'libpaper' and 'pcre' were added
as new software, and the versions of the following software was updated:
'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in'
shell script was added in 'reproduce/software/shell/' which is installed
with 'libpaper'.
- Even though we intentionally add the necessary flags to add RPATH inside
the built executable at compilation time, some software don't do it
(different software on different operating systems!). Until now, for
historical reasons this check was done in different ways for different
software on GNU/Linux sytems. But now it is unified: if 'patchelf' is
present we apply it. Because of this, 'patchelf' has been put as a
top-level prerequisite, right after Tar and is installed before anything
else.
- In 'versions.conf', GNU Libtool is recognized as 'libtool', but in
'basic.mk', it was 'glibtool'! This caused many confusions and is
corrected with this commit (in 'basic.mk', it is also 'libtool').
- A new argument is added to the './project' script to allow easy loading
of the project's shell and environment for fast/temporary testing of
things in the same environment as the project. Before activating the
project's shell, we completely remove all host environment variables to
simulate the project's environment. It can be called with this command:
'./project shell'. A simple prompt has also been added to highlight that
the user is using the Maneage shell!
|
|
Until now, the English texts that embeds the list of software to
acknowledge in the paper was hard-wired into the low-level coding
('reproduce/software/shell/configure.sh' to be more specific). But this
file is very low-level, thus discouraging users to modify this surrounding
text.
While the list of software packages can be considered to be 'data' and is
fixed, the surrounding text to describe the lists is something the authors
should decide on. Authors of a scientific research paper take
responsibility for the full paper, including for the style of the
acknowledgments, even if these may well evolve into some standard text.
With this commit, authors who do *not* modify
'reproduce/software/config/acknowledge_software.sh' will have a default
text, with only a minor English correction from earlier versions of
Maneage. However, Authors choosing to use their own wording should be able
to modify the text parameters in
`reproduce/software/config/acknowledge_software.sh` in the obvious
way. This is much more modular than asking project authors to go looking
into the long and technical 'configure.sh' script.
Systematic issues: the file
`reproduce/software/config/acknowledge_software.sh` is an executable shell
script, because it has to be called by
`reproduce/software/shell/configure.sh`, which, in principle, does not yet
have access to `GNU make` (if I understand the bootstrap sequence
correctly). It is placed in `config/` rather than `shell/`, because the
user will expect to find configuration files in `config/`, not in `shell/`.
A possible alternative to avoid having a shell script as a configure file
would be to let `reproduce/software/config/acknowledge_software.sh` appear
to be a `make` file, but analyse it in `configure.sh` using `sed` to remove
whitespace around `=`, and adding other hacks to switch from `make` syntax
to `shell` syntax. However, this risks misleading the user, who will not
know whether s/he should follow `make` conventions or `shell` conventions.
|
|
When some files should not be merged, until now we were suggesting to also
add deleted files to the '.gitattributes' file. However, this feature of
Git doesn't work for deleted files and they would still show up in the
'master' branch after a merge.
So with this commit, we have added a simple AWK command to run after a
merge that will automatically detect and delete such files (using the
output of 'git status --porcelain').
Also, two minor typos were corrected in the newly added
'servers-backup.conf' file: the copyright year was wrong and there was no
new-line at the end of the file (a good convention!).
|
|
Until now, Maneage would only build Flock before building everything else
using Make (calling 'basic.mk') in parallel. Flock was necessary to avoid
parallel downloads during the building of software (which could cause
network problems). But after recently trying Maneage on FreeBSD (which is
not yet complete, see bug #58465), we noticed that the BSD implemenation of
Make couldn't parse 'basic.mk' (in particular, complaining with the 'ifeq'
parts) and its shell also had some peculiarities.
It was thus decided to also install our own minimalist shell, Make and
compressor program before calling 'basic.mk'. In this way, 'basic.mk' can
now assume the same GNU Make features that high-level.mk and python.mk
assume. The pre-make building of software is now organized in
'reproduce/software/shell/pre-make-build.sh'.
Another nice feature of this commit is for macOS users: until now the
default macOS Make had problems for parallel building of software, so
'basic.mk' was built in one thread. But now that we can build the core
tools with GNU Make on macOS too, it uses all threads. Furthermore, since
we now run 'basic.mk' with GNU Make, we can use '.ONESHELL' and don't have
to finish every line of a long rule with a backslash to keep variables and
such.
Generally, the pre-make software are now organized like this: first we
build Lzip before anything else: it is downloaded as a simple '.tar' file
that is not compressed (only ~400kb). Once Lzip is built, the pre-make
phase continues with building GNU Make, Dash (a minimalist shell) and
Flock. All of their tarballs are in '.tar.lz'. Maneage then enters
'basic.mk' and the first program it builds is GNU Gzip (itself packaged as
'.tar.lz'). Once Gzip is built, we build all the other compression software
(all downloaded as '.tar.gz'). Afterwards, any compression standard for
other software is fine because we have it.
In the process, a bug related to using backup servers was found in
'reproduce/analysis/bash/download-multi-try' for calling outside of
'basic.mk' and removed Bash-specific features. As a result of that bug-fix,
because we now have multiple servers for software tarballs, the backup
servers now have their own configuration file in
'reproduce/software/config/servers-backup.conf'. This makes it much easier
to maintain the backup server list across the multiple places that we need
it.
Some other minor fixes:
- In building Bzip2, we need to specify 'CC' so it doesn't use 'gcc'.
- In building Zip, the 'generic_gcc' Make option caused a crash on FreeBSD
(which doesn't have GCC).
- We are now using 'uname -s' to specify if we are on a Linux kernel or
not, if not, we are still using the old 'on_mac_os' variable.
- While I was trying to build on FreeBSD, I noticed some further
corrections that could help. For example the 'makelink' Make-function
now takes a third argument which can be a different name compared to the
actual program (used for examle to make a link to '/usr/bin/cc' from
'gcc'.
- Until now we didn't know if the host's Make implementation supports
placing a '@' at the start of the recipe (to avoid printing the actual
commands to standard output). Especially in the tarball download phase,
there are many lines that are printed for each download which was really
annoying. We already used '@' in 'high-level.mk' and 'python.mk' before,
but now that we also know that 'basic.mk' is called with our custom GNU
Make, we can use it at the start for a cleaner stdout.
- Until now, WCSLIB assumed a Fortran compiler, but when the user is on a
system where we can't install GCC (or has activated the '--host-cc'
option), it may not be present and the project shouldn't break because
of this. So with this commit, when a Fortran compiler isn't present,
WCSLIB will be built with the '--disable-fortran' configuration option.
This commit (task #15667) was completed with help/checks by Raul
Infante-Sainz and Boud Roukema.
|
|
With this commit, Maneage now includes instructions to build the memory
tracing tool Valgrind and the program 'patch' (to apply corrections/patches
in text files and in particular the sources of programs).
For this version of Valgrind, some patches were necessary for an interface
with OpenMPI 2.x (which is the case now). Also note that this version of
Valgrind's checks can fail with GCC 10.1.x (when using '--host-cc'), and
the failures aren't due to internal problems but due to how the tests are
designed (https://bugs.gentoo.org/707598). So currently if any of
Valgrind's checks fail, Maneage still assumes that Valgrind was built and
installed successfully.
While testing on macOS, we noticed that it needs the macOS-specific 'mig'
program which we can't build in Maneage. DESCRIPTION: The mig command
invokes the Mach Interface Generator to generate Remote Procedure Call
(RPC) code for client-server style Mach IPC from specification files. So a
symbolic link to the system's 'mig' is now added to the project's programs
on macOS systems.
This commit's build of Patch and Valgrind has been tested on two GNU/Linux
distributions (Debian and ArchLinux) as well as macOS.
Work on this commit started by Boud Roukema, but also involved tests and
corrections by Mohammad Akhlaghi and Raul Infante-Sainz.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until now Maneage used the host's GNU Gettext if it was present. Gettext is
a relatively low-level software that enables programs to print messages in
different languages based on the host environment. Even though it has not
direct effect on the running of the software for Maneage and the lanugage
environment in Maneage is pre-determined, it is necessary to have it
because if the basic programs see it in the host they will link with it and
will have problems if/when the host's Gettext is updated.
With this commit (which is actually a squashed rebase of 9 commits by Raul
and Mohammad), Gettext and its two extra dependencies (libxml2 and
libunistring) are now installed within Maneage as a basic software and
built before GNU Bash. As a result, all programs built afterwards will
successfully link with our own internal version of Gettext and
libraries. To get this working, some of the basic software dependencies had
to updated and re-ordered and it has been tested in both GNU/Linux and
macoS.
Some other minor issues that are fixed with this commit
- Until this commit, when TeX was not installed, the warning message
saying how to run the configure step in order to re-configure the
project was not showing the option `-e'. However, the use of this option
is more convenient than entering the top-build directory and etc every
time. So with this commit, the warning message has been changed in order
use the option `-e' in the re-configure of the project.
- Until now, on macOS systems, Bash was not linking with our internally
built `libncurses'. With this commit, this has been fixed by setting
`--withcurses=yes' for Bash's configure script.
|
|
Until this commit, the configure step would fail with an error when
compiling libgit2 on a test system. The origin of this bug, on the OS that
was tested, appears to be that in OpenSSL Version 1.1.1a, openssl/ec.h
fails to include openssl/openconf.h. The bug is described in more detail at
https://savannah.nongnu.org/bugs/index.php?58263
With this commit, this is fixed by manually inserting a necessary
components. In particular, `sed` is used to insert a preprocessor
instruction into `openssl/openconf.h`, defining `DEPRECATED_1_2_0(f)`, for
an arbitrary section of code `f`, to include that code rather than exclude
it or warn about it.
This commit is valid provided that openssl remains at a version earlier
than 1.2.0. Starting at version 1.2.0, deprecation warnings should be run
normally. We have thus moved the version of OpenSSL in `versions.conf' to
the section for programs that need to be manually checked for version
updates with a note to remind the user when reaching that version.
Other packages that use OpenSSL may benefit from this commit, not just
libgit2.
|
|
Until now Gnuastro and Astropy where installed by default in any clean
build of Maneage. Gnuastro is used to do the demonstration analysis that is
reported in the paper and Astropy was just there to help in testing the
building of the MANY tools it depends on! It (and its dependencies) also
had several papers that helped show software citation.
However, as Boud suggested in task #15619, the burden of installing them
for a new user may be too much and any future changes will cause merge
conflicts. It may also give the impression that Maneage is only/mainly
written for astronomers.
So with this commit, I am removing Astropy as a default target. But we can
only remove Gnuastro after we include an alternative analysis in the
demonstration `delete-me' files. Following Boud's suggestion in that task,
`TARGETS.conf' was also added to the files to be ignored in any future
merge (in the checklist of `README-hacking.mk'). The solution was already
described there, but mainly focused on the deleted `delete-me' files. So
with this commit, I brought out this item as a more prominent item in the
list. Maybe we can later add the analysis done in the Maneage paper (not
yet published).
In terms of testing the software builds, we already have task #15272
(Single target to build all high-level software, for testing) that aims to
have a single configure option to install ALL high-level software and we
can ask people to try if they like and report errors.
|
|
Until now, the sed script for determining URL download rules in the three
software building Makefiles (`basic.mk', `high-level.mk' and `python.mk')
considered package names such as `fftw-3...` and `fftw2-2.1...` to be
identical. As the example above shows, this would make it hard to include
some software that may hav conflicting non-number names.
With this commit, the SED script that is used to separate the version from
the tarball name only matches numbers that are after a dash
(`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but
`fftw-3-...` and `fftw2-2.1...` to be different. As a result of this
change, the `elif' check for some of the other programs like `m4', or
`help2man' was also corrected in all three Makefiles.
While doing this check on all the software, we noticed that `zlib-version'
is being repeated two times in `version.conf' so it was removed. It caused
no complications, because both were the same number, but could lead to bugs
later.
|
|
Until now, throughout Maneage we were using the old name of "Reproducible
Paper Template". But we have finally decided to use Maneage, so to avoid
confusion, the name has been corrected in `README-hacking.md' and also in
the copyright notices.
Note also that in `README-hacking.md', the main Maneage branch is now
called `maneage', and the main Git remote has been changed to
`https://gitlab.com/maneage/project' (this is a new GitLab Group that I
have setup for all Maneage-related projects). In this repository there is
only one `maneage' branch to avoid complications with the `master' branch
of the projects using Maneage later.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
|
It is this time of year again: TeXLive has transitioned to its 2020 release
and the year is imprinted into the installation directory of TeXLive. Until
now, we have had to manually change this year and it caused complications
and was very annoying.
With this commit, the explicit year has been removed from TeXLive's
installation and we now simply put a `maneage' instead of the year. I tried
this on another system and it worked nicely. Until the time that we can
fully install LaTeX packages from source tarballs, this is the best thing
we could do for now.
|
|
Minizip is a dependency of XLSX I/O and until now, I was just using the
most recent version I found (2.9.2), but XLSX I/O is written for the
Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my
computer!!! I think XLSX I/O's CMake is instructed to look into system
directories by default when it doesn't find the directories in the given
places. And because I had installed Minizip on my operating system, it
did't complain.
Upon trying the build on their systems, Yahya, Raul and Zahra reported a
failure in the build of XLSX I/O which was due the to the problem above (we
were installing the wrong version of Minizip!).
With this commit, this has been fixed by installing the 1.x series of
Minizip (whish is actually installed within zlib!).
This commit was original done by Mohammad Akhlaghi.
|
|
With this commit, CMake has been updated to its most recent version.
This upgrade has been done because in the installation of XLSX I/O on
macOS laptop, it crashes complaining about C compiler "not able to
compile a simple test program". After a fast search, I found it could be
possible to just use the most recent version of CMake to solve the
problem. But it didn't work. In any case, it is good to have the most
recent version of CMake included.
|
|
In the last update of Astropy to version 4.0 they removed some things
that the previous version of Astroquery needs. As a consequence, it is
also necessary to update the Astroquery version to be a ble to run with
the Astropy 4.0. With this commit, the update of Astroquery to it most
recent version (0.4) has been done.
|
|
MissFITS is package for manipulating FITS files.
I added it as my first commit to the project for educational
purposes.
|
|
XLSX I/O is a very simple and fast program and library for reading and
writing `.xls' and `.xlsx' files (mainly used by Microsoft Excel) to CSV
files. It has two separate executables that can be called for an Excel file
and will output a CSV plain text file that can then be used within the
pipeline with more standard tools.
|
|
Until now, the project would first ask for the basic directories, then it
would start testing the compiler. But that was problematic because the
build directory can come from a previous setting (with `./project configure
-e'). Also, it could confuse users to first ask for details, then suddently
tell them that you don't have a working C library! We also need to store
the CPATH variable in the `LOCAL.conf' because in some cases, the compiler
won't work without it.
With this commit, the compiler checking has been moved at the start of the
configure script. Instead of putting the test program in the build
directory, we now make a temporary hidden directory in the source directory
and delete that directory as soon as the tests are done.
In the process, I also noticed that the copyright year of the two hidden
files weren't updated and corrected them.
|
|
Until now, the configuration Makefiles (in
`reproduce/software/config/installation' and `reproduce/analysis/config')
had a `.mk' suffix, similar to the workhorse Makefiles. Although they are
indeed Makefiles, but given their nature (to only keep configuration
parameters), it is confusing (especially to early users) for them to also
have a `.mk' (similar to the analysis or software building Makefiles).
To address this issue, with this commit, all the configuration Makefiles
(in those directories) are now given a `.conf' suffix. This is also assumed
for all the files that are loaded.
The configuration (software building) and running of the template have been
checked with this change from scratch, but please report any error that may
not have been noticed.
THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS
FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE
SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES
ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
|
|
GNU Make 4.3 was just announced, so I have updated it here is well. This
was important because until now the installable version was in alpha-mode
(4.2.90), now its a stable version.
|
|
After a new rebuild of the project, I noticed that we now need to also
build the `mweights' package.
|
|
Newer versions of Astropy package has been released. With this commit,
it has been updated. It has been increased from v3.2.1 to v4.0
|
|
Now that its 2020, its necessary to include this year in the copyright
statements.
|
|
With this commit, we now have the core R interpretter within the
template. We should later include instructions to install R packages
(possibly in a separate top-level Makefile like Python).
|
|
Recent builds of the template need these three packages to build the PDF.
This was reported by Hamed Altafi.
|
|
Until now we weren't including this package, but Alberto Madrigal recently
reported that his build of the template failed because it needed it.
With this commit, it is now being installed with the template.
|
|
Newer versions of these packages have recently come out with major
improvements, so they have been updated in the template.
|
|
These two packages are necessary to build the GNU C Library.
|
|
Perl is necessary to build Texinfo and later to build LaTeX. Until now we
were just using the host operating system's installation of Perl, but in
some instances that Perl can be too old and not suppor the features
necessary. With this commit, Perl is now built from source during the basic
installation step of the template.
This was reported by Idafen Santana Pérez, after trying the pipeline on an
Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
|
|
When building the log4cxx tarball from its Git history, I noticed that
files with very long names are not packaged by tar (because by default
Automake uses the ancient v7 tar format that only supports file names less
than 99 characters).
So I build the tarball with the `tar-ustar' option to Automake (by
modifying the log4cxx source) and the resulting tarball was able to compile
and run successfully. This has been described above the rule to build
log4cxx and I also sent an email to their developing mailing list to inform
them of this problem. If they address it, I will remove the note on the
necessary corrections.
|
|
Some minor corrections were made in the template:
- When making the distribution, `.swp' files (created by Vim) are also
removed.
- Autoconf is set as a prerequisite of Automake
I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball
needs some patches, so I have just left it half done until someone actually
needs it and we apply the patch.
|
|
Until now, the tarballs were the first normal prerequisite of the
software. As a result if their date changed, the whole software would be
re-built. However, for tarballs specifically, we actually check their
contents with a checksum, so their date is irrelevant (if its newer than
the built program, but has the same checksum, there is no need to re-build
the software).
Also, calling the tarball name as an argument to the building process (for
example `gbuild') was redundant. It is now automatically found from the
list of order-only prerequisites within `gbuild' and `cbuild' (similar to
how it was previously found in the `pybuild' for Python building).
A `README.md' file has also been placed in `reproduce/software/make' to
help describe the shared properties of the software building
Makefiles. This will hopefully grow much larger in the future.
|
|
Python's `lmfit' module and all its major dependencies (`asteval',
`corner', `emcee' and `uncertainties') have been included in the template.
While doing this I noticed that if the tarballs are the last prerequisite
of each software building rule, then when building in parallel, the
template will immediately start building packages as soon as the first one
is downloaded. Not like the current way that it will attempt to download
several, then start building. For now, this has been implemented in the
Python build rules for all the modules and we'll later do the same for the
other programs and libraries. This also motivated a simplification of the
`pybuild' function: it now internally looks into the prerequisites and
selects the tarball from the prerequisite that is in the tarballs
directory.
This isn't a problem for the build, but I just don't understand why Python
can't recognize the version of `emcee', Python reads the version of `emcee'
as `0.0.0'! But it doesn't cause any crash in the build, so for now its
fine.
|
|
The tarball of HEALPix includes multiple languages and doesn't include the
ready-to-run GNU Build System by default, we actually have to build the
`./configure' script for the C/C++ libraries. So it was necessary to also
include GNU Autoconf and GNU Automake as prerequisites of HEALPix.
However, the official GNU Autoconf tarball (dating from 2012) doesn't build
on modern systems, so I just cloned it from its source and bootstrapped it
and built its modern tarball which we are using here.
|
|
The following software are added with this commit: eigency, esutil, flake8,
future, galsim, lsstdesccoord, pybind11 and pyflakes.
|
|
As part of an effort to bring in all the dependencies of the LSST Science
pipeline (which includes the last commit), these software are now available
in the template.
|
|
With this commit these three software packages are now installable with
this template.
|
|
Carlos Morales Socorro reported that his LaTeX build was missing the
`trimspaces' package, so it is now included in the pipeline.
|
|
It was some time since these three software were not updated! With this
commit the template now uses the most recent stable release of these
packages.
Also, the hosting server for ImageMagick was moved to my own webpage
because unfortunately ImageMagick removes its tarballs from its own
version.
|
|
New versions of astropy, bash, cmake, curl, findutils, gawk, gcc,
ghostscript, git, make, gsl had recently come so they are updated with this
commit.
About GNU Findutils and GNU Make: I was bootstrapping (building the tarball
of) these two separately separately because their standard tarball release
had problems on some systems. Both have been updated now so I am no longer
using my own webpage as their main URL.
A special note about GNU Make. I just noticed that during bootstrapping,
GNU Make would use the fixed version string of `4.2.90' for any commit!!!
But fortunately they have officially released their 4.2.90 version, so we
are safely using their own webpage. The only difference is the compression
format. My old bootstrapped build was `tar.lz', but the standard release is
`tar.gz'.
Also, all the basic programs (installed in `.local/bin') in `basic.mk' are
now existance-only dependencies (after a `|'). Because later programs just
use them at a very basic level, so there is no need to rebuild everything
when Bash gets updated for example.
|
|
Until this commit, the name of the variable for `beautifulsoup4'
checksum was wrong, and because of that, it was not able to install it.
With this commit, `beautifulsoup-checksum' has been replaced for
`beautifulsoup4-checksum' in the `reproduce/software/make/python.mk'
Makefile, and the problem has been fixed. This was not noticed
previously because this Python package is only installed when some high
level programs are requested to be installed.
With this commit the version of `imagemagick' program has been also
updated because the previous version is not available in the official
website anymore.
|
|
Recently the version of Gnuastro in the template was updated to version
0.10. However, I had forgot to update the `gnuastro.conf' file to fit with
the necessary new features of this version. The new general Gnuastro
configuration file is now added instead.
This bug was reported by Deepak.
|
