aboutsummaryrefslogtreecommitdiff
path: root/reproduce/analysis/config
AgeCommit message (Collapse)AuthorLines
2022-04-15IMPORTANT: more generic, robust and secure INPUTS.conf and download.mkMohammad Akhlaghi-41/+68
SUMMARY: it is necessary to update your 'INPUTS.conf' and 'download.mk'. Until now, adding an input file involved several steps that needed manual (and inconvenient!) intervention: for every file, you needed to define four variables in 'INPUTS.conf', and in 'reproduce/analysis/make/download.mk' you had to use a (complex for large number of files) shell 'if/elif/else' condition to link the names of the input files to those variables. Besides inconvenience, this could cause bugs (typos!). Furthermore, a basic MD5 checksum was used for verifying the files. With this commit, a new structure has been defined for 'INPUTS.conf' that (thanks to some pretty useful GNU Make features), removes the need for users to manually edit 'reproduce/analysis/make/download.mk', and reduces the number of variables necessary for each file to three (from four). Furthermore, we now use the SHA256 checksum for input data validation. Regarding the trick used in 'INPUTS.conf' (form the newly added description in 'download.mk'): In GNU Make, '.VARIABLES' "... expands to a list of the names of all global variables defined so far" (from the "Other Special Variables" section of the GNU Make manual). Assuming that the pattern 'INPUT-%-sha256' is only used for input files, we find all the variables that contain the input file names (the '%' is the filename). Finally, using the pattern-substitution function ('patsubst'), we remove the fixed string at the start and end of the variable name. Steps you need to take: - INPUTS.conf: translate your old format to the new format (after carefully reading the description in the comments at the start of the file). After applying the new standards, you don't need to use the variables of 'INPUTS.conf' directly in your Makefiles! For example if one of your input datasets is called 'abc.fits', the checksum variable will be 'INPUT-abc.fits-sha256' and in your high-level Makefiles, you can simply set '$(indir)/abc.fits' as a prerequisite (like you probably did already). - reproduce/analysis/make/download.mk: for the definition and rule of 'inputdatasets', simply use the Maneage branch, and remove anything you had added in your project. In the process, I also noticed that 'README-hacking.md' still referred to 'master' as the main project branch, while we have used 'main' in the paper (and is the common convention with Git).
2022-01-21IMPORTANT: Updates to almost all softwareMohammad Akhlaghi-5/+5
This commit primarily affects the configuration step of Maneage'd projects, and in particular, updated versions of the many of the software (see P.S.). So it shouldn't affect your high-level analysis other than the version bumps of the software you use (and the software's possibly improve/changed behavior). The following software (and thus their dependencies) couldn't be updated as described below: - Cryptography: isn't building because it depends on a new setuptools-rust package that has problems (https://savannah.nongnu.org/bugs/index.php?61731), so it has been commented in 'versions.conf'. - SecretStorage: because it depends on Cryptography. - Keyring: because it depends on SecretStorage. - Astroquery: because it depends on Keyring. This is a "squashed" commit after rebasing a development branch of 60 commits corresponding to a roughly two-month time interval. The following people contributed to this branch. - Boudewijn Roukema added all the R software infrastructure and the R packages, as well as greatly helping in fixing many bugs during the update. - Raul Infante-Sainz helped in testing and debugging the build. - Pedram Ashofteh Ardakani found and fixed a bug. - Zahra Sharbaf helped in testing and found several bugs. Below a description of the most noteworthy points is given. - Software tarballs: all updated software now have a unified format tarball (ustar; if not possible, pax) and unified compression (Lzip) in Maneage's software repository in Zenodo (https://doi.org/10.5281/zenodo.3883409). For more on this See https://savannah.nongnu.org/task/?15699 . This won't affect any extra software you would like to add; you can use any format recognized by GNU Tar, and all common compression algorithms. This new requirement is only for software that get merged to the core Maneage branch. - Metastore (and thus libbsd and libmd) moved to highlevel: Metastore (and the packages it depends on) is a high-level product that is only relevant during the project development (like Emacs!): when the user wants the file meta data (like dates) to be unchanged after checking out branches. So it should be considered a high-level software, not basic. Metastore also usually causes many more headaches and error messages, so personally, I have stopped using it! Instead I simply merge my branches in a separate clone, then pull the merge commit: in this way, the files of my project aren't re-written during the checkout phase and therefore their dates are untouched (which can conflict with Make's dates on configuration files). - The un-official cloned version of Flex (2.6.4-91 until this commit) was causing problems in the building of Netpbm, so with this commit, it has been moved back to version 2.6.4. - Netpbm's official page had version 10.73.38 as the latest stable tarball that was just released in late 2021. But I couldn't find our previously-used version 10.86.99 anywhere (to see when it was released and why we used it! Its at last more than one year old!). So the official stable version is being used now. - Improved instructions in 'README.md' for building software environment in a Docker container (while having project source and output data products on the local system; including the usage of the host's '/dev/shm' to speed up temporary operations). - Until now, the convention in Maneage was to put eight SPACE characters before the comment lines within recipes. This was done because by default GNU Emacs (also many other editors) show a TAB as eight characters. However, in other text editors, online browsers, or even the Git diff, a TAB can correspond to a different number of characters. In such cases, the Maneage recipes wouldn't look too interesting (the comments and the recipe commands would show a different indentation!). With this commit, all the comment lines in the Makefiles within the core Maneage branch have a hash ('#') as their first character and a TAB as the second. This allows the comment lines in recipes to have the same indentation as code; making the code much more easier to read in a general scenario including a 'git diff' (editor agnostic!). P.S. List of updated software with their old and new versions - Software with no version update are not mentioned. - The old version of newly added software are shown with '--'. Name (Basic) Old version New version ------------ ----------- ----------- Bzip2 1.0.6 1.0.8 CURL 7.71.1 7.79.1 Dash 0.5.10.2 0.5.11.5 File 5.39 5.41 Flock 0.2.3 0.4.0 GNU Bash 5.0.18 5.1.8 GNU Binutils 2.35 2.37 GNU Coreutils 8.32 9.0 GNU GCC 10.2.0 11.2.0 GNU M4 1.4.18 1.4.19 GNU Readline 8.0 8.1.1 GNU Tar 1.32 1.34 GNU Texinfo 6.7 6.8 GNU diffutils 3.7 3.8 GNU findutils 4.7.0 4.8.0 GNU gmp 6.2.0 6.2.1 GNU grep 3.4 3.7 GNU gzip 1.10 1.11 GNU libunistring 0.9.10 1.0 GNU mpc 1.1.0 1.2.1 GNU mpfr 4.0.2 4.1.0 GNU nano 5.2 6.0 GNU ncurses 6.2 6.3 GNU wget 1.20.3 1.21.2 Git 2.28.0 2.34.0 Less 563 590 Libxml2 2.9.9 2.9.12 Lzip 1.22-rc2 1.22 OpenSLL 1.1.1a 3.0.0 Patchelf 0.10 0.13 Perl 5.32.0 5.34.0 Podlators -- 4.14 Name (Highlevel) Old version New version ---------------- ----------- ----------- Apachelog4cxx 0.10.0-603 0.12.1 Astrometry.net 0.80 0.85 Boost 1.73.0 1.77.0 CFITSIO 3.48 4.0.0 Cmake 3.18.1 3.21.4 Eigen 3.3.7 3.4.0 Expat 2.2.9 2.4.1 FFTW 3.3.8 3.3.10 Flex 2.6.4-91 2.6.4 Fontconfig 2.13.1 2.13.94 Freetype 2.10.2 2.11.0 GNU Astronomy Utilities 0.12 0.16.1-e0f1 GNU Autoconf 2.69.200-babc 2.71 GNU Automake 1.16.2 1.16.5 GNU Bison 3.7 3.8.2 GNU Emacs 27.1 27.2 GNU GDB 9.2 11.1 GNU GSL 2.6 2.7 GNU Help2man 1.47.11 1.48.5 Ghostscript 9.52 9.55.0 ICU -- 70.1 ImageMagick 7.0.8-67 7.1.0-13 Libbsd 0.10.0 0.11.3 Libffi 3.2.1 3.4.2 Libgit2 1.0.1 1.3.0 Libidn 1.36 1.38 Libjpeg 9b 9d Libmd -- 1.0.4 Libtiff 4.0.10 4.3.0 Libx11 1.6.9 1.7.2 Libxt 1.2.0 1.2.1 Netpbm 10.86.99 10.73.38 OpenBLAS 0.3.10 0.3.18 OpenMPI 4.0.4 4.1.1 Pixman 0.38.0 0.40.0 Python 3.8.5 3.10.0 R 4.0.2 4.1.2 SWIG 3.0.12 4.0.2 Util-linux 2.35 2.37.2 Util-macros 1.19.2 1.19.3 Valgrind 3.15.0 3.18.1 WCSLIB 7.3 7.7 Xcb-proto 1.14 1.14.1 Xorgproto 2020.1 2021.5 Name (Python) Old version New version ------------- ----------- ----------- Astropy 4.0 5.0 Beautifulsoup4 4.7.1 4.10.0 Beniget -- 0.4.1 Cffi 1.12.2 1.15.0 Cryptography 2.6.1 36.0.1 Cycler 0.10.0 0.11.0+} Cython 0.29.21 0.29.24 Esutil 0.6.4 0.6.9 Extension-helpers -- 0.1 Galsim 2.2.1 2.3.3 Gast -- 0.5.3 Jinja2 -- 3.0.3 MPI4py 3.0.3 3.1.3 Markupsafe -- 2.0.1 Numpy 1.19.1 1.21.3 Packaging -- 21.3 Pillow -- 8.4.0 Ply -- 3.11 Pyerfa -- 2.0.0.1 Pyparsing 2.3.1 3.0.4 Pythran -- 0.11.0 Scipy 1.5.2 1.7.3 Setuptools 41.6.0 58.3.0 Six 1.12.0 1.16.0 Uncertainties 3.1.2 3.1.6 Wheel -- 0.37.0 Name (R) Old version New version -------- ----------- ----------- Cli -- 2.5.0 Colorspace -- 2.0-1 Cowplot -- 1.1.1 Crayon -- 1.4.1 Digest -- 0.6.27 Ellipsis -- 0.3.2 Fansi -- 0.5.0 Farver -- 2.1.0 Ggplot2 -- 3.3.4 Glue -- 1.4.2 GridExtra -- 2.3 Gtable -- 0.3.0 Isoband -- 0.2.4 Labeling -- 0.4.2 Lifecycle -- 1.0.0 Magrittr -- 2.0.1 MASS -- 7.3-54 Mgcv -- 1.8-36 Munsell -- 0.5.0 Pillar -- 1.6.1 R-Pkgconfig -- 2.0.3 R6 -- 2.5.0 RColorBrewer -- 1.1-2 Rlang -- 0.4.11 Scales -- 1.1.1 Tibble -- 3.1.2 Utf8 -- 1.2.1 Vctrs -- 0.3.8 ViridisLite -- 0.4.0 Withr -- 2.4.2
2021-04-17IMPORTANT: print-general-metadata new name for print-copyrightMohammad Akhlaghi-3/+18
Summary: - Use the new name of this variable in your Makefiles. - In 'metadata.conf', remove fixed URL prefixes for DOIs ('https://doi.org/') or arXiv ('https://arxiv.org/abs'). Until now, the Make variable that would print the general metadata (of whole project) into each to-be-published dataset was called 'print-copyright'! But it now does much more than simply printing the copyright, it will also print a lot of metadata like arXiv ID, Zenodo DOI and etc into plain-text outputs. The out-dated name could thus be misleading and cause confusions. With this commit, the variable is therefore called 'print-general-metadata'. After merging your project with the Maneage branch, please replace any usage of 'print-copyright' to 'print-general-metadata'. Also with this commit, 'README-hacking.md' mentions 'metadata.conf' and 'print-general-metadata' in the "Publication checklist" section and reminds you to keep the first up to date, and use the second in your to-be-published datasets.
2021-01-02Copyright year updated in all source filesMohammad Akhlaghi-5/+5
Having entered 2021, it was necessary to update the copyright years at the top of the source files. We recommend that you do this for all your project-specific source files also.
2020-11-15Building final PDF: pdf-build-final has to be given an explicit yesMohammad Akhlaghi-5/+5
Until now, when the 'pdf-build-final' configuration variable (defined in 'reproduce/analysis/config/pdf-build.conf') was given any string a PDF would be built. This was very confusing, because people could put a 'no' and the PDF would still be built! With this commit, only when this variable has a value of 'yes' will the PDF be built. If given any other string (or no string at all), it will not produce a PDF. This issue was reported by Zahra Sharbaf.
2020-09-24Gnuastro's analysis configuration files removedMohammad Akhlaghi-128/+0
Until now, the core Maneage branch included some configuration files for Gnuastro's programs. This was actually a remnant of the distant past when Maneage didn't actually build its own software and we had to rely on the host's software versions. This file contained the configuration files specific to Gnuastro for this project and also had a feature to avoid checking the host's own configuration files. However, we now build all our software ourselves with fixed configuration files (for the version that is being installed and its version is stored). So those extra configuration files were just extra and caused confusion and problems in some scenarios. With this commit, those extra files are now removed. Also, two small issues are also addressed in parallel with this commit: - When running './project make clean', the 'hardware-parameters.tex' macro file (which is created by './project configure' is not deleted. - The project title is now written into the default output's PDF's properties (through 'hypersetup' in 'tex/src/preamble-header.tex') through the LaTeX macro. All these issues were found and fixed with the help of Samane Raji.
2020-07-04Better names and comments in INPUTS.confMohammad Akhlaghi-20/+23
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this very alien to anyone that is not familiar with the history of the Hubble Space Telescope (the camera is no longer used! Its just used here since its one of the standard FITS files from the FITS standard webpage). With this commit the variable names have been modified to be more readable and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf' (describing the purpose of each variable) were edited and made more clear.
2020-06-10IMPORTANT: bug fix in default data download script of download.mkMohammad Akhlaghi-3/+39
Summary of possible semantic conflicts 1. The recipe to download input datasets has been modified. You have to re-set the old 'origname' variable to 'localname' (to avoid confusion) and the default dataset URL should now be complete (including the actual filename). See the newly added descriptions in 'INPUTS.conf' for more on this. Until now, when the dataset was already present on the host system, a link couldn't be made to it, causing the project to crash in the checksum phase. This has been fixed with properly naming the main variable as 'localname' to avoid the confusion that caused it. Some other problems have been fixed in this recipe in the meantime: - When the checksum is different, the expected and calculated checksums are printed. - In the default paper, we now print the full URL of the dataset, not just the server, so the checksum of the 'download.tex' step has been updated.
2020-06-06IMPORTANT: Added publication checklist, improved relevant infrastructureMohammad Akhlaghi-1/+26
Possible semantic conflicts (that may not show up as Git conflicts but may cause a crash in your project after the merge): 1) The project title (and other basic metadata) should be set in 'reproduce/analysis/conf/metadata.conf'. Please include this file in your merge (if it is ignored because of '.gitattributes'!). 2) Consider importing the changes in 'initialize.mk' and 'verify.mk' (if you have added all analysis Makefiles to the '.gitattributes' file (thus not merging any change in them with your branch). For example with this command: git diff master...maneage -- reproduce/analysis/make/initialize.mk 3) The old 'verify-txt-no-comments-leading-space' function has been replaced by 'verify-txt-no-comments-no-space'. The new function will also remove all white-space characters between the columns (not just white space characters at the start of the line). Thus the resulting check won't involve spacing between columns. A common set of steps are always necessary to prepare a project for publication. Until now, we would simply look at previous submissions and try to follow them, but that was prone to errors and could cause confusion. The internal infrastructure also didn't have some useful features to make good publication possible. Now that the submission of a paper fully devoted to the founding criteria of Maneage is complete (arXiv:2006.03018), it was time to formalize the necessary steps for easier submission of a project using Maneage and implement some low-level features that can make things easier. With this commit a first draft of the publication checklist has been added to 'README-hacking.md', it was tested in the submission of arXiv:2006.03018 and zenodo.3872248. To help guide users on implementing the good practices for output datasets, the outputs of the default project shown in the paper now use the new features). After reading the checklist, please inspect these. Some other relevant changes in this commit: - The publication involves a copy of the necessary software tarballs. Hence a new target ('dist-software') was also added to package all the project's software tarballs in one tarball for easy distribution. - A new 'dist-lzip' target has been defined for those who want to distribute an Lzip-compressed tarball. - The '\includetikz' LaTeX macro now has a second argument to allow configuring the '\includegraphics' call when the plot should not be built, but just imported.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-2/+16
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf
2020-04-26verify-outputs.conf: typo correction in comment to avoid confusionBoud Roukema-1/+1
Until now, the comment in the file said that setting the `verify-outputs` variable to `yes` disables the verification. Looking at `reproduce/analysis/make/verify.mk` shows that the opposite is true. With this commit, the word `disable` is replaced with `enable` so that the user is not confused by the conflict between the source code in the other file and this comment.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-0/+128
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-1/+0
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-0/+3
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-2/+2
Now that its 2020, its necessary to include this year in the copyright statements.
2019-06-29Added citation for TIDES, sorted progs alphabeticallyMohammad Akhlaghi-1/+1
While reviewing Prasenjit's commits, I noticed that we had forgot to add the citation for TIDES, also to make things clear, the program/library build rules are now sorted alphabetically. Finally, I noticed that after building the TiKZ PDF figures, it is crashing (like on Prasenjit's computer). After looking around, I noticed its because we were setting the of the `TEXINPUTS' environment variable to be the installed TeX Live directory (which was ultimately redundant because by default TeX will look into where it was installed). The important thing is just that we remove any possible value the host system has, not to set new directories.
2019-06-28tides library addedPrasenjit Saha-1/+1
TIDES is an ODE integrator with multiple-precision arithmetic.
2019-04-15New architecture to separate software-building and analysis stepsMohammad Akhlaghi-0/+38
Until now, the software building and analysis steps of the pipeline were intertwined. However, these steps (of how to build a software, and how to use it) are logically completely independent. Therefore with this commit, the pipeline now has a new architecture (particularly in the `reproduce' directory) to emphasize this distinction: The `reproduce' directory now has the two `software' and `analysis' subdirectories and the respective parts of the previous architecture have been broken up between these two based on their function. There is also no more `src' directory. The `config' directory for software and analysis is now mixed with the language-specific directories. Also, some of the software versions were also updated after some checks with their webpages. This new architecture will allow much more focused work on each part of the pipeline (to install the software and to run them for an analysis).