aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2020-02-07Edited parts of the textMohammad Akhlaghi-127/+177
While reading over the already written parts (and hopefully complete the paper), they were edited/corrected to be more clear.
2020-02-06Minor edits to various partsMohammad Akhlaghi-73/+136
Some edits were made after rereading of some parts.
2020-02-05Imported Raul's additions to README-hacking.md, no conflictsMohammad Akhlaghi-2/+16
There were no conflicts in this merge.
2020-02-01Better message for analysis when configuration wasn't completeMohammad Akhlaghi-4/+13
Until now, when `./project make' was run after an insuccessful run of `./project configure', it would just say to run `./project configure'. But for a first time user, this could be confusing because when the configuration is done in parallel, the error message can be very high on the command-line outputs and not seen clearly. With this commit, the error message is more complete and describes the problem and what the users should do in which circumstance.
2020-02-01Make called with -k during software buildingMohammad Akhlaghi-2/+2
Until now, Make was just run ordinarily on the two Makefiles of the software building phase. Therefore when there was a problem with one software while building in parallel, Make would only complete the running rules and stop afterwards. But when other rules don't depened on the crashed rule, its a waste of time to stop the whole thing. With this commit, both calls to Make in the `configure.sh' script are done with the `-k' option (or `--keep-going' in GNU Make). With this option, if a rule crashes, the other rules that don't depend on it will also be run. Generally, anything that doesn't depend on the crashed rule will be done. The `-k' option is a POSIX definition in Make, so it is present in most implemenetations (for the call to `basic.mk').
2020-02-01IMPORTANT: reproduce/software/bash renamed to reproduce/software/shellMohammad Akhlaghi-12/+12
Until now the shell scripts in the software building phase were in the `reproduce/software/bash' directory. But given our recent change to a POSIX-only start, the `configure.sh' shell script (which is the main component of this directory) is no longer written with Bash. With this commit, to fix that problem, that directory's name has been changed to `reproduce/software/shell'.
2020-01-31Configure step: compiler checks done before basic settingsMohammad Akhlaghi-421/+413
Until now, the project would first ask for the basic directories, then it would start testing the compiler. But that was problematic because the build directory can come from a previous setting (with `./project configure -e'). Also, it could confuse users to first ask for details, then suddently tell them that you don't have a working C library! We also need to store the CPATH variable in the `LOCAL.conf' because in some cases, the compiler won't work without it. With this commit, the compiler checking has been moved at the start of the configure script. Instead of putting the test program in the build directory, we now make a temporary hidden directory in the source directory and delete that directory as soon as the tests are done. In the process, I also noticed that the copyright year of the two hidden files weren't updated and corrected them.
2020-01-31Architecture-specific C headers on Debian-based OSs now accountedMohammad Akhlaghi-6/+15
Rencely the building of GCC was allowed on Debian-based systems that have their basic C library in architecture-specific directories, like `/usr/lib/x86_64-linux-gnu'. However, these systems also have their headers in non-standard locations, for example `/usr/include/x86_64-linux-gnu' and this caused a crash on a new Ubuntu system. /usr/include/stdio.h:27:10: fatal error: bits/libc-header-start.h: No such file or directory 27 | #include <bits/libc-header-start.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. The reason it didn't cause problems on other Ubuntus that we tested before was historic: In the old days, we would ask Ubuntu systems to install multilib features to have GCC. Because they had installed those features, this problem didn't show up! But this wasn't mandatory! With this commit, the `CPATH' environment variable is set (similar to how `LIBRARY_PATH' was set) and this fixed the problem on a clean Debian virtual machine. This bug was reported by Sebastian Luna Valero.
2020-01-27Moving basic configuration of Git section in README-hacking.mdRaul Infante-Sainz-13/+13
Until this commit, the small section of `README-hacking.md' in which it is explained how to do the first configuration of Git was at the beginning of the section `First custom commit'. However, it is better to have it just before the item `Your first commit' in that section. With this commit, this change has been done. Now the reader has the necessary steps for configuring Git just before it is needed for making the first commit.
2020-01-27Initial scripts compatible with Dash (minimalistic POSIX)Mohammad Akhlaghi-40/+52
Until now, the initial project scripts were primarily tested with GNU Bash. But Bash is not generally available on all systems (it has many features beyond POSIX). Because of this, effectively we were imposing the requirement on the user that they must have Bash installed. We recently started this with setting the shebang of `project' and `reproduce/software/bash/configure.sh' to `/bin/sh'. After doing so, Raul and Gaspar reported an error on their systems. To fix the problem, I installed Dash (a minimalist POSIX-compliant shell) on my computer and temporarily set the shebangs to `/bin/dash', ran the project configuration step and fixed all issues that came up. With this commit, it can go all the way to building GCC on my system's Dash. After this stage (when `high-level.mk' is called), there is no problem, because we have our own version of GNU Bash and that installed version is used. Probably some more issues still remain and will hopefully be found in the future. While doing this, I also noticed the following two minor issues: - The `./project configure' option `--input-dir' was not recognized because it was mistakenly checking `--inputdir'. It has been corrected. - The test C programs now use the `<<EOF' method instead of `echo'. - In `basic.mk', the extra space between `syspath' and `:=' was removed (it was an ancient relic!).
2020-01-27Analysis phase description started with Final paper and verificationMohammad Akhlaghi-54/+157
With this commit, the general outline of the analysis phase is given, as well as a description of the LaTeX macros and their relation to the paper and thier verification. Also, the data-lineage figure was updated to have references.tex also and some resizing of the folders in file-architecture to be more clear.
2020-01-26General project structure and configuration describedMohammad Akhlaghi-344/+669
In the last few days I have been writing these two sections in the middle of other work. But I am making this commit because it has already become a lot! I am now going onto the description of `./project make'.
2020-01-23Hashbangs of project and configure.sh set to /bin/shMohammad Akhlaghi-2/+2
Until now, the hashbang of these two shell scripts was set to `/bin/bash', hence assuming that GNU Bash exists on the host system! But this is an extra requirement on the host operating system and these two scripts should be written such that they operate on a POSIX shell (the generic `/bin/sh' which can point to any shell program). With this commit this has been implemented! We may confront some errors as the system is run on other systems, but we should fix such errors and work hard to make these two scripts as POSIX-compatible as possible (runnable on any shell, so as not to force users to install Bash before running the project). This completes Task #15525.
2020-01-23IMPORTANT: Project preparation is now also done with project makeMohammad Akhlaghi-98/+37
Until now, the main commands to run the project were these: `./project configure' (to build the software), `./project prepare' (to possibly arrange input datasets and build special configuration Makefiles) and finally `./project make' to run the project. The main logic behind the "prepare" phase `top-prepare.mk' is to build configuration files that can be fed into the "make" step and optimize its operation. For example when the total number of necessary inputs for the majority of the analysis is not as large as the total number of inputs. With "prepare" (when necessary), you go through the raw inputs, select the ones that are necessary for the rest of the project. The output of `top-prepare.mk' is a configuration file (a Make variable) that keeps the IDs (numbers, names, etc). That configuration file would then be used in the `top-make.mk' to identify the lower level targets and allow optimal project organization and management. But the last two are both part of the analysis, and while they indeed need different calls to Make to be executed, many projects don't actually need a preparation phase: ultimately, its an implementation choice by the project developers and doesn't concern the project users (or the developers when they are running it). To avoid confusing the users, or simply annoying them when a projet doesn't need it, with this commit, the top-level `top-prepare.mk' and `top-make.mk' Makefiles are called with the single `./project make' command and `./project prepare' has been dropped. I noticed this while writing the paper on this system.
2020-01-22Adding Raul as contributor of README-hacking.mdRaul Infante-Sainz-1/+2
Since I (Raul) did some changes (and I hope to do more :-)) in the `README-hacking.md', I am adding my information at the beginning of this file.
2020-01-22Adding basic configuration of Git in README-hacking.mdRaul Infante-Sainz-1/+14
Until this commit, we were asuming that Git was already properly configured. However, in order to be as complete as possible, it would be good if the basic commands to configure Git were in the `README-hacking.md'. With this commit, a small paragraph has been added in order to have the basic Git configuration commands (i.e. to configure the name, email, and favorite text editor).
2020-01-22Better explanation for missing static C libraryMohammad Akhlaghi-12/+22
Until now, the explanation for a missing static C library didn't actually guide the users to look above and see the error message! So with this commit, I edited it a little to be more clear (and mention to look above). Also, I noticed that on Amazon AWS systems, the static C library is installed as a separate package, so to help the users, I added the necessary command and some better explanation.
2020-01-22Perl is now a dependency of Coreutils, LD_LIBRARY_PATH in basic.mkMohammad Akhlaghi-67/+80
Until now Perl was built after Coreutils, but I recently noticed that Coreutils actually uses Perl while creating its manpages. So it is now built before Coreutils. Also, while testing on an Amazon AWS EC2 server, we noticed that Coreutils can't build its man page for `md5sum'. The problem was found to be due to the fact that until now, we weren't actually setting LD_LIBRARY_PATH to our installed library path in `basic.mk'. Therefore, it would crash because the server had an older version of OpenSSL than the one that the template's Coreutils was built with. In the meantime (while addressing the issues above, because we only had one thread on the AWS server) I also noticed a few programs that were using a summarize compilation command (that just prints `CC xxx.c' instead of the whole command) so I fixed them by adding `V=1'. This bug was found by Idafen Santana PĂ©rez.
2020-01-20New rendering of the file architecture plotMohammad Akhlaghi-193/+109
Until now the file architecture plot at the directories ontop of the top-level files. This made it hard to visually identify the top-level files. They are not placed ontop of the sub-directories and some space is added to highlight the files in the top-level directory and those in the subdirectories. Two other changes were made: - The symbolic links created in the top source directory are also shown. - The coding of this figure was made much more elegant by defining a PGFPlots node class and just changing the things that are direrent between each directory.
2020-01-20Added figure showing project's file structureMohammad Akhlaghi-92/+364
It was a little hard to describe the file structure so instead of using a standard listing as most papers do, I thought of showing the file and directory structure as boxes within each other (modeled on the Gnome disk-utility). Some other polishing was done throughout the paper also.
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-87/+85
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-19GNU Make updated to version 4.3Mohammad Akhlaghi-3/+3
GNU Make 4.3 was just announced, so I have updated it here is well. This was important because until now the installable version was in alpha-mode (4.2.90), now its a stable version.
2020-01-19New --check-config option to ./project to check software build statusMohammad Akhlaghi-31/+56
Until now, it was necessry to run a long `while true' loop to see what is currently being built at configure time. So with this commit, a new `--checkconfig' option has been added to `./project' that can be called to run that loop and make it easier to check.
2020-01-19Corrected typo in last commit (forgetting \ at end of line)Mohammad Akhlaghi-1/+1
In the previous commmit, I had forgot to add a `\' after the newly added `sys_library_path' variable to the `high-level.mk' call.
2020-01-19LIBRARY_PATH is set accordingly based on the hostMohammad Akhlaghi-20/+58
Until now, GCC wouldn't build properly on Debian-based operating systems because `ld' needed to link with several necessary C library features like `crti.o' and `crtn.o' (this is an `ld' issue, not GCC). The solution is to add the directory containing them to `LIBRARY_PATH'. In the previous commit, I actually searched for these files, but while testing on another system, I noticed that it can be problematic (other architectures may exist). With this commit, we are actually finding the build architecture of the running GCC (which is the same as the `ld') and using that to fix a fixed directory to `LIBRARY_PATH'.
2020-01-19Better search for static C library at start of configurationMohammad Akhlaghi-108/+75
Until now, to see if a working static C library and `sys/cdefs.h' exist, we were checking absolute locations like `/usr/include/sys/cdefs.h' or `/usr/lib/libc.a' and `/usr/lib64/libc.a'. But this is not robust because on different systems, they can be in different locations. With this commit, we actually use `find' to find the location of `libc.a' and use that to add elements to CPPFLAGS and LDFLAGS. This should fix the problem on systems that have them on non-standard locations.
2020-01-18TeXLive version printing updated to include revisionMohammad Akhlaghi-7/+26
Until now, when find the versions of the TeXLive packages, we would assume that `cat-date' is always present (because some packages don't have a version!). However, apparently an update has been made in the TeXLive Manager (`tlmgr') and `cat-date' is no longer present! As a result, none of the TeXLive packages were being printed. With this commit, it now assumes that `revision' is always present for every package, but it also attempts to read `cat-date' (for backwards compatability). When `cat-version' isn't present, it will try printing `revision' and if that is also not present, it will print the date.
2020-01-18Raw draft (until now as a separate repository) importedMohammad Akhlaghi-411/+3663
Until now, I was writing the paper without the template. But we will soon be adding a tutorial to the template, and I thought it will be good to have an example demonstration here too. So I just brought the hole project into the template structure, allowing us to add the template analysis later when its ready, and also allowing us to easily reproduce this paper ofcourse (without having to worry about the host's TeXLive installation.
2020-01-18First set of customizations doneMohammad Akhlaghi-352/+11
The unnecessary parts were removed and the project now runs.
2020-01-18Added mweights as a TeXLive packageMohammad Akhlaghi-1/+2
After a new rebuild of the project, I noticed that we now need to also build the `mweights' package.
2020-01-18README-hacking.md: edits and corrections for easier customizationMohammad Akhlaghi-10/+12
The checklist descriptions were slightly edited to be more clear. Also, while following them, I noticed that while removing the "delete-me" parts on `verify.mk', would cause an error: the `if [ $$m == delete-me ];' statement we were saying to delete cause an error because `elif' was the first statement Bash would see. So with this commit, the `download' conditional (which isn't instructed to be deleted) was set to be the top (with an `if') and the `delete-me' conditional now has an `elif'.
2020-01-17README-hacking.md: script to list installed programs before configureMohammad Akhlaghi-10/+18
Until now, the small one-line script that lists programs was introduced in the checklist after running `./project configure'. But people would mostly miss it because they would wait until the configuration is complete. With this commit, that point has been put above the `./project configure' step. Readers are instructed to open a new terminal and run that script, then go to the next step so they see the directories get filled actively. It will also help them understand what is going on.
2020-01-13Minor corrections in referencing Infante-Sainz+2019Mohammad Akhlaghi-6/+5
Until now the actual journal webpage was used for Raul's paper. However, the journal webpage needs authorized access for people to read it, therefore its will be inaccessible for many people. A better and more well known place for the paper (atleast in astronomy) is the ADS link. In the ADS link, if someone has access to the journal, they will get the journal's version and if not, they will get the arXiv version. It also has a common BibTeX export tool for all journals. We had also done this for the other papers in that list. With this commit, I thus changed the URL for the paper, and also removed the "issue" number (4 in this case), since that is mostly irrelevant, only the volume and page numbers are usually used for the other papers too.
2020-01-13Added Infante-Sainz et al. 2019 as most recent paper using this templateRaul Infante-Sainz-3/+4
The "SDSS extended PSFs" paper was already included as an example of papers wich uses this template. However, the reference was the arXiv one. With this commit, since the paper has been finally published, it has been added the final reference to the journal.
2020-01-13Adding X11 libraries path to LDFLAGS in Ghostscript installationRaul Infante-Sainz-1/+4
Until this commit, the checking of X11 installation done to ensure that it is already available in the host system was crashing in macOS systems. The reason is that the place of the X11 libraries use to be `/opt/X11/lib' in macOS systems. With this commit, this issue has been fixed by adding this directory to the LDFLAGS.
2020-01-13Updated verion of Astropy to 4.0 the most recent oneRaul Infante-Sainz-3/+3
Newer versions of Astropy package has been released. With this commit, it has been updated. It has been increased from v3.2.1 to v4.0
2020-01-11Corrected markdown code notations in one README.mdMohammad Akhlaghi-4/+4
In markdown, to specify that part of the text should be shown as code we need to put it between two `. But in `reproduce/software/make/README.md', the code parts started with ` and finished in ' (like the file name above). With this commit, this has been corrected and it will display properly on web browsers.
2020-01-01Verification function checks if file existsMohammad Akhlaghi-8/+20
Until now, if the file to be verified didn't exist, a different checksum would be generated, and it would stop, but it wasn't immediately clear if the differing checksum is because the file doesn't exist at all! With this commit, before calculating the checksum, we first make sure if the file exists. If it doesn't exist an explicit error is printed and thus will help the project editor to find the cause of the problem.
2020-01-01Minor corrections in `README-hacking.md' after verificationMohammad Akhlaghi-4/+7
In the previous commit, I had forgot to update a small part in the checklist (when modifying `top-make.mk') which is now corrected. I also added a few sentences in the description of how to customize the verification to make it easier to understand.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-32/+198
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01README-hacking.md checklist now also ignores changes in paper.texMohammad Akhlaghi-7/+12
In the previous commit, we added the files to ignore from the template branch, but only the files that had been deleted. With this commit, `paper.tex' is also added to the files that must be ignored from the template branch (the file remains in the project, but in the template branch, its contents are just dummy place-holders).
2020-01-01Added step README-hacking's checklist to avoid merging dummy filesMohammad Akhlaghi-0/+15
During the checklist we guide the user to delete the dummy `delete-me*' files from their custom branch. Later, if the dummy files are updated in the template's master branch, if the user merges with the template branch, these files will be written back into their project! This is very annoying! With this commit, a step was added in the `README-hacking.md' checklist, just after deleting the dummy files to avoid this problem using the `.gitattributes' file, telling Git to keep the changes as implemented in the merging branch (`ours').
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-70/+70
Now that its 2020, its necessary to include this year in the copyright statements.
2019-12-18Fixing Libxml2 checksum variable nameRaul Infante-Sainz-1/+1
Until this commit, the number `2' was missing in the checksum variable name of that library. It was `libxml-checksum' but it should be `libxml2-checksum'. With this commit, this issue has been fixed.
2019-12-18Removed extra backslash in Jeepney prerequisitesRaul Infante-Sainz-1/+1
An extra backslash in the prerequisites of Jeepney Python package was causing a crash in the installation of that software. With this commit, this problem has been fixed by removing the backslash.
2019-12-14R explicitly built without support for OpenMPMohammad Akhlaghi-1/+2
OpenMP takes a LONG TIME to build, so to keep things reproducible we are explicitly disabling OpenMP, if a user needs OpenMP, its trivial to just add it as a prerequisite of R. The problem is that in some scenarios (based on other dependencies and when they were built in the build directory), OpenMP may be present when R is being installed and in other it may not. We don't want the result to be different between the two builds.
2019-12-14Core R package is now in templateMohammad Akhlaghi-0/+16
With this commit, we now have the core R interpretter within the template. We should later include instructions to install R packages (possibly in a separate top-level Makefile like Python).
2019-12-13Necessary TeXLive packages installed: pdfescape letltxmacro bitsetMohammad Akhlaghi-1/+1
Recent builds of the template need these three packages to build the PDF. This was reported by Hamed Altafi.
2019-12-04Added pdftexmcds to the TeXlive packages to installMohammad Akhlaghi-1/+1
Until now we weren't including this package, but Alberto Madrigal recently reported that his build of the template failed because it needed it. With this commit, it is now being installed with the template.
2019-12-04Perl built without -shared on macOSMohammad Akhlaghi-1/+11
Until now, while building Perl, the `-Dlddlflags="-shared $$LDFLAGS"' option was being used for all systems. However, this caused `symbol(s) not found for architecture x86_64' problems on macOS systems. With this commit, this configure option is only passed for GNU/Linux systems. With it, Perl can be built nicely on both GNU/Linux and macOS.