aboutsummaryrefslogtreecommitdiff
path: root/reproduce/software/make
AgeCommit message (Collapse)AuthorLines
2019-05-31Fixing rpath problem in CFITSIO installationRaul Infante-Sainz-12/+12
`cfitsio' was recently updated and it cames up with a problem when trying to build shared libraries (on Mac OS system laptop). This is because the `configure' script for building `cfitsio' include by default `rpath'. With this commit, this issue is fixed by modifying the installation of `cfitsio'. Using `sed', each ocurrence of `@rpath' in `configure' is replaced by `$(ildir)'. Once it has been done, the installation of `cfitsio' goes as normal. In this commit, the version of the `cfitsio' has been also updated to the most recent one.
2019-05-28Corrected typo in Imfit installation, but not working yetRaul Infante-Sainz-1/+1
With this commit, I have corrected a typo in the installation of `imfit'. In principle it is working on Mac OS system but when I tried to install it in GNU/Linux system it crashed. It complains about a problem with the `cfitsio' library: /pathto/libcfitsio.a: error adding symbols: File format not recognized As in the last commits done by Mohammad in the project, `cfitsio' installation has been upgraded and also the installation has been modified, I am going to try this new version. I will also check if it is a problem about dynamic/static library. It also seems that the installation is taking libraries and variables from the host system, so I will check that everything used is from our own programs/libraries.
2019-05-27Added paper citation of ImfitRaul Infante-Sainz-1/+2
Until this commit, `imfit' paper was not included into the acknowledgements. With this commit, a bib tex file for `imfit' has been added. So, now it is properly cited into the final paper.
2019-05-27Added Imfit into the projectRaul Infante-Sainz-0/+30
With this commit, `imfit' has been included into the project. As described in the official webpage (http://www.mpe.mpg.de/~erwin/code/imfit/): Imfit is a program for fitting astronomical images -- especially images of galaxies, though it can in principle be used for fitting other sources. This program uses the `scons' program to build itself (not the traditional GNU `configure' and `make' system). I have tested it by using an example that can be found in the `examples' directory of the decompressed tarball. It works fine without any error on my Mac OS system.
2019-05-27Adding SCons into the projectRaul Infante-Sainz-0/+16
With this commit, SCons has been included into the project. As in the official webpage of this program says: SCons is an Open Source software construction tool—that is, a next-generation build tool. Think of SCons as an improved, cross-platform substitute for the classic Make utility with integrated functionality similar to autoconf/automake and compiler caches such as ccache. In short, SCons is an easier, more reliable and faster way to build software. The motivation for including this software into the project is because there are some software that use this system for the installation. In particular, the necessity of installing it comes from Imfit. This is an astronomical software that uses this system so that is why it has been included into the project. In principle it is simple, and I have tested it on Mac OS sytem without any problem.
2019-05-24PyYAML decompressed tarball directory name fixedRaul Infante-Sainz-1/+1
Until this commit, the name of the decompressed tarball directory of PyYAML Python package was wrong. It has to be `PyYAML-version' instead of `pyyaml-version'. When I run the installation on Mac OS system it went up to the end of the installation with no error. However, when I tried to install it on a GNU/Linux system, it complained about no finding the `pyyaml-version' directory, which is the expected because the name was wrong! With this commit, I have fixed this issue by writting correctly the name of the decompressed tarball directory.
2019-05-24Added PyYAML Python package into the projectRaul Infante-Sainz-0/+12
With this commit, PyYAML Python package has been added into the project. It is widely used in the Python community and the goal is to have human readable configuration files. As in the web page (https://pypi.org/project/PyYAML/) says: YAML is a data serialization format designed for human readability and interaction with scripting languages. PyYAML is a YAML parser and emitter for Python.
2019-05-24Added LibYAML library into the projectRaul Infante-Sainz-0/+5
With this commit, LibYAML library has been added. This library is a prerequisite of the Python package PyYAML, which is widely used in the Python community when configuration scripts are needed.
2019-05-24Shared CFITSIO installation includedMohammad Akhlaghi-2/+3
By default (when you run `make' within CFITSIO), it only builds a static library. So until now, the template would only install a static version of this library. To be more clear about which libraries are used during the linking of programs that use CFITSIO, it would be helpful to have shared library versions also. Also, if the system has problems with static libraries (like macOS systems), then it won't go looking outside the template to link with them (these paths are hardcoded in the linker, which we don't build on macOS and just use the system's tools). With this commit, we are explicity running `make shared' in the CFITSIO installation to have shared CFITSIO also. I also removed the old `static' element (which we don't use anymore in any of the programs and have to remove some time later!).
2019-05-22TeXLive and Ghostscript also added as dependencies of MatplotlibMohammad Akhlaghi-0/+2
Matplotlib can optionally use LaTeX and Ghostscript as dependencies to render text with LaTeX. Since we already have their build rules, with this commit, they have been added as its prerequisites.
2019-05-21ImageMagick put as prerequisite of MatplotlibRaul Infante-Sainz-0/+1
With this commit, ImageMagick program has been set as prerequisite of Matplotlib Python package. Since some submodules of Matplotlib rely on ImageMagick programs (for example, those to make image animations), and now we have ImageMagick into the project, it is good to install ImageMagick when Matplotlib is requested to be installed.
2019-05-21ImageMagick is now included into the projectRaul Infante-Sainz-0/+12
With this commit, ImageMagick software has been added into the project. This software is useful to deal and treat images from the command line. Since it is widely used and a lot of other programs rely on it, it is worth to have it into the project.
2019-05-09Typo, space instead of TAB, corrected in recipe of MetastoreMohammad Akhlaghi-27/+27
In the previous commits where Metastore's recipe was updated, all the `TAB's in the recipe were saved as spaces just before the commit (due to a copying and pasting from the terminal, not the text editor). With this commit, I am correcting this.
2019-05-09Metastore Git hooks properly written after its installationMohammad Akhlaghi-35/+34
Until now, in the recipe to build Metastore, we would store the current directory in a `current_dir' Bash variable before running `gbuild' to build Metastore. However, in this Makefile, we aren't using `.ONESHELL'. As a result, each un-quoted new-line character creates a new shell and the `current_dir' variable that we used afterwards was empty! This happened because until recently, Metastore was being built in `high-level.mk' (where `.ONESHELL' is activated, because we are using GNU Make to call that Makefile). But in `basic.mk', we are using the host's Make, which may not be GNU Make, so we can't use any GNU-only features. Also, this error was hard to notice, because we weren't using `&&' before writing the final target of Metastore! With this commit, both this issues are addressed: all the lines in the recipe are now quoted in the end with a backslash, and the steps before making the target are separated by `&&', not `;' (which doesn't cause a crash if the command fails). This fixes bug #56295.
2019-05-09Removed extra Binutils from GCC's prerequisitesMohammad Akhlaghi-1/+0
Until this commit, Binutils was brough up as a GCC prerequisite two times: Once as a special (`host_cc') dependency (for when we want to build GCC), another time as a dependency in every build. The first one is now obsolete: on MacOS systems where we don't build Binutils, we define its symbolic links in the same recipe. With this commit, we remove the first one, so Binutils is always a dependency of GCC.
2019-05-06Imported work on X window system for netpbm, no conflictsMohammad Akhlaghi-1/+1
There weren't any conflicts in this merge.
2019-05-06Disabled X Window System in netpbm installation for GNU/Linux systemsRaul Infante-Sainz-1/+1
Until this commit, we were installing `netpbm' without disabling the X Windows System in GNU/Linux. That is the default option in the configure step of `netpbm'. However, we are not installing the necessary libraries (X11) and headers for that. As a consecuence, when testing in a system where we don't have these libraries/headers (Ubuntu 14.04), it crashes. With this commit, we disable the X Windows System option in `netpbm' by giving the answer `none' to one of the last answers to that question in the configure step.
2019-05-05Upgraded to GCC 9.1Mohammad Akhlaghi-26/+27
GCC 9.1 was just released and includes many new optimization features that can benefit projects in this template also. Also, the build directory of GCC has been moved inside the unpacked directory (similar to all the other programs). As a result, while GCC is being built, the `.build/software/build-tmp' directory will only have one directory for GCC. Until now, there was one `gcc-build' directory and one unpacked tarball.
2019-05-01Disabled X Window System in Cairo installationRaul Infante-Sainz-1/+2
Until this commit, we were installing `cairo' without disabling the X Windows System. That is the default option in the configure step of `cairo'. However, we are not installing the necessaries libraries (X11) and headers for that. As a consecuence, when testing in a system where we don't have these libraries/headers (Ubuntu 14.04), it crashes. With this commit, we disable the X Windows System option in `cairo' configure step by setting the option `--with-x=no'.
2019-05-01Corrected typo in netpbm tarball extensionRaul Infante-Sainz-1/+1
In the last imported work about fixing all backslashes, the extension of `netpbm' tarball was not the correct one. Now we are using `.tar.gz' instead of `.tgz'. With this commit, we fix this typo by replacing the `.tgz' by `.tar.gz' in the rule of `netpbm'.
2019-05-01Problem in generic CMake rule correctedMohammad Akhlaghi-5/+9
In the recent correction of backslashes, I had missed adding an `&&' before the `rm' command of the generic CMake building rule (`cbuild' of `build-rules.mk'). With this commit, this has been corrected. A multi-threaded Make was also added to build OpenMPI (which takes long and is often built alone because it takes so long and other things depend on it) and the HDF5 library.
2019-04-30TAB-typo corrected in rule to build SCAMPMohammad Akhlaghi-1/+1
The TAB character wasn't used in the second line of the recipe to build SCAMP. This has been corrected with this commit.
2019-04-30New rule to build Coreutils, it is now built alongMohammad Akhlaghi-85/+108
Recently, after the installation of Coreutils, we added a step to manually run PatchELF over all the contents of the `$(ibdir)'. However, after a fresh test, this method failed: because while PatchELF was updating `mv', another program that was using `mv' couldn't do so and crashed. To fix this problem, Coreutils is now installed in a dummy directory also and the exact files that need `rpath' are identified and PatchELF is run on them (to be clean). Also, higher-level `basic.mk' software (higher-level than Bash), were re-organized so they depend on Coreutils. With this, we are no sure that when Coreutils is being built, it is the only program that is being built and PatchELF won't interfere with any other program. Also, OpenSSL and CMake were set to be bulit in parallel to speed up their build.
2019-04-30Imported some recent/parallel work, conflicts fixedMohammad Akhlaghi-34/+46
Especially because of the new convention regarding backslashes, there were many conflicts that are now fixed. But none were substantial.
2019-04-30End-of-line Backslashs no longer right under each otherMohammad Akhlaghi-756/+759
When we need to quote the new-line character we end the line with a backslash (`\'). Until now, our convention has been to put all such backslashes under each other to help in visual inspection. But this causes a lot of confusion in version control: if only one line's length is larger, the whole block will be marked as changed and thus makes it hard to visually see the actual change. It also makes debuging the code (adding some temporary lines) hard. With this commit, I went through all the files and tried to fix all such cases so only a single white space character is between the last command character and the backslash. Where there was an empty line (ending with a backslash, to help in visually separating the code into blocks), I put the backslash right under the previous line's. This completes task #15259.
2019-04-30Better configure checks to see if GCC can be builtRaul Infante-Sainz-2/+2
Until now, to test if GCC can use `sys/cdefs.h', we were building a small test program using it. But after testing on an Ubuntu 14.04, we noticed that the GCC test during the configure script passes, but GCC still can't be built. After some investigation we noticed its available in other directories, but during the build of GCC, those directories aren't used, and it only assumes it to be under `/usr/include'. So with this commit, we are only checking this particular location for this header, not a test run of GCC. After fixing this, we noticed that GCC's build crashed again because it couldn't link with `libc.a' (or `libc.so'). So we also added a for this library and added a new warning to inform the user what they might be able to do. Finally, we noticed that in one of the last steps of building GCC, we weren't using `&&', but `;', so the GCC name file would be built, even when the GCC build failed.
2019-04-30Running PatchELF on all programs after CoreutilsMohammad Akhlaghi-13/+33
Even though the Coreutils configure script says that it adds `rpath' to its executables, its executables don't have it. As a result, it goes to use the host operating system libraries, causing failures when they don't match with the template. Unfortunately after some tests with the configure script, I couldn't find any way to include `rpath'! Even though `-rpath-link' is present in all linking commands during Coreutils' build, the installed files still don't have it! So I was forced to use PatchELF. However, one problem is that Coreutils installs many programs, not just one like Bash or AWK. As a brute-force solution, with this commit, we are running PatchELF on all the installed programs. It won't hurt those that already have it, but it will fix all those that don't. With this commit, I am also making the following non-related small changes: - In `build-rules.mk', the `&&' characters were placed at the start of the line for better readability. - Bash, Readline and NCURSES are now built in parallel on systems that support it (during `basic.mk').
2019-04-29Added M4 as prerequisite of GMPRaul Infante-Sainz-1/+2
Until this commit, `m4' was not a prerequisite of `gmp'. However, during a test in Ubuntu 14.04 using one single core in the configure step, it crashed complaining about not having `m4' installed. With this commit, we set `m4' as a prerequisite of `gmp'.
2019-04-29Corrected spaces/TAB in some rulesRaul Infante-Sainz-61/+61
In some rules there were some spaces when we should use TAB, and also the other way around. We were using TAB instead using spaces. With this commit, we fix that spaces/TAB in the necessary rules.
2019-04-29Added numpy and six as prerequisites of h5pyRaul Infante-Sainz-2/+4
Until now, we were missing `numpy' and `six' as prerequisites of `h5py'. Because we did the configure step with all cores, `numpy' and `six' allways were built before `h5py' with any crash. However, in a single thread configure run we noticed that we were missing these two dependencies. With this commit, we fix this issue by setting `numpy' and `six' as prerequisites of `h5py'.
2019-04-29Modified copyright information of some filesRaul Infante-Sainz-0/+2
With this commit, the copyright information of some files have been modify in order to include the work of Raul Infante-Sainz.
2019-04-29Modified sip_tpv Python package prerequisitesRaul Infante-Sainz-1/+2
Until this commit, the prerequisites of `sip_tpv' were `mpmath' and `sympy'. However, the real prerequisites of `sip_tpv' are `astropy', `numpy' and `sympy'. With this commit, we fix this issue, and now `mpmath' is only a prerequisite of `sympy'.
2019-04-27Astrometry-net installation modified to avoid two reporting stepsRaul Infante-Sainz-0/+8
Until this commit, we had a problem in the installation of Astrometry-net in Mac OS systems. During the runing of the Makefile, it stopped at the reporting stage because it tried to do a couple of steps that in Mac OS are not possible: $ cat /proc/cpuinfo $ free The reason is that `/proc/cpuinfo' and `free' doesn't exist in Mac OS. With this commit, we override these two steps. Since they are only for reporting, they are not mandatory. So, we avoid doing them by using `sed' before running the Makefile.
2019-04-27Modified netpbm installation answers for Mac OS systemsRaul Infante-Sainz-6/+4
Until now, we installed `netpbm' by setting the default paths to libraries and headers. That worked fine for GNU/Linux systems, however, in Mac OS systems we have to explicity say to `netpbm' questions what are the paths to the libraries and headers. We found this problem because we tried to run `solve-field' to obtain the astrometry of some images, and then it goes to use `pnmfile', a program that failed because it was not properly linked with `libnetpmb'. With this commit, we fix this problem by answering properly the questions in the configure step of `netpbm' and setting explicity where we want to place the libraries and headers. With this commit, we also update `netpbm' version. To do that, we have to download the last version, for which it doesn't exist a tarball. So, we built this tarball and put it in the Mohammad's webpage.
2019-04-27Lack of semicolons in Binutils installation rule for Mac OS fixedRaul Infante-Sainz-7/+7
Until this commit, in Mac OS we were installing `binutils' as symbolic links of various programs (`as', `ar', `ld', `nm',` ps' and `ranlib'). However, there was a missing semicolon at the end of each line. As a consecuence, the installation of `binutils' on Mac OS systems failed. With this commit, we fix this problem by typing a semicolon at the end of each makelink line.
2019-04-25Added --enable-single option in FFTW installationRaul Infante-Sainz-1/+1
Until this commit, FFTW was installed by default, without the single precission option. However, when installing `sextractor' in a new system we found an error in the installation complaining about not having single precission files of FFTW. More explicity the error was: "FFTW single precision library files not found in [...]". With this commit, we fix this problem by passing the option `--enable-single' in the installation of FFTW.
2019-04-24Imported work on mpmath, SymPy and sip_tpv, no conflictsMohammad Akhlaghi-0/+26
There wasn't any conflict in this merge.
2019-04-24Added paper citation of sip_tpv Python packageRaul Infante-Sainz-4/+6
Until now, we were not citing the paper of `sip_tpv' package. With this commit, we have been fix this issue.
2019-04-23Python package sip_tpv added into the templateRaul Infante-Sainz-0/+8
With this commit, we add `sip_tpv' Python package into the template. This is a small package to convert SIP distorsion coefficients into PV distorsion coefficients, and the other way around. This package is useful in a astronomical context, specially when `swarp' is going to be used in order to resample images. The reason is that `swarp' only can understand PV distorsion coefficients.
2019-04-23Python package SymPy added into the templateRaul Infante-Sainz-5/+5
With this commit, we add `sympy' Python package into the template. This is a package to do symbolic mathematics. The motivation is that it is a prerequisite of `sip_tpv' Python package, which is useful to convert SIP distorsion coefficients into PV coefficients (in the context of astronomical images). However, the availability of `sympy' in the template will be useful for anyone interested in this package.
2019-04-23Python package mpmath added into the templateRaul Infante-Sainz-0/+16
With this commit, we add `mpmath' Python package into the template. This package is a prerequisite of `sympy', a package to do symbolic mathematics. The motivation of adding this package is because it is a dependency of `sympy', which is more widely used into the Python science community.
2019-04-23Bash updated with patched tarball (version 5.0.7)Mohammad Akhlaghi-3/+25
Until now we were using the official tarball of GNU Bash. However, Bash is distributed using patches, not a public version controlled history. So to implement newer features of Bash, its necessary to apply those patches and make the tarball ourselves. With this commit, we have done just that: we used the 7 patches that have been released since version 5.0.0 and made a tarball to use for this template. The instructions on how to make the patched tarball are also given above the Bash build rule.
2019-04-23Awk, coreutils and sed are now prerequisites of metastoreRaul Infante-Sainz-2/+9
Until now, `metastore' did not depend on the necessaries programs that we use to install it (`awk', `coreutils' and `sed'). They are not official dependencies of `metastore', but we need them to install it. With this commit, we put these programs as prerequisites of `metastore' in order to be able to install it without any problem.
2019-04-22High-level software now specified in TARGETS.mkMohammad Akhlaghi-135/+122
Until now, to specify which high-level software you want the project to contain, it was necessary to go into the `high-level.mk' Makefile that is complicated and can create bugs. With this commit, a new `reproduce/software/config/installation/TARGETS.mk' file has been created that is easily/cleanly in charge of documenting the final high-level software that must be built for the project. Also, until now, FFTW was set as a dependency of Numpy while we couldn't actually get Numpy to use it! It was just there for future reference and to justify its build rule. But now that many software won't be built and there is no problem with having rules even though a project might not use them, it has been removed.
2019-04-22Git, Metastore, cURL and Libbsd moved to basic softwareMohammad Akhlaghi-119/+126
Git and Metastore are very basic and fundamental tools for the template, so to keep things clean (let the `high-level.mk' software only represent optional software in the template), these two software (and their dependencies: `cURL' and `Libbsd') will now be built in `basic.mk'.
2019-04-22Removed ATLAS as a prerequisite of ScampRaul Infante-Sainz-4/+12
Until this commit, ATLAS was a prerequisite of Scamp. The documentation says that. However, we have been able to install Scamp without having ATLAS installed. As a consecuence, ATLAS does not have to be a prerequisite of Scamp anymore. With this commit, we remove ATLAS as prerequisite of Scamp. We also put available software in the template as optional because not all people are going to use these software.
2019-04-22SCAMP and cdsclient have been added into the projectRaul Infante-Sainz-5/+44
With this commit, we add SCAMP into the project. This program is part of the Astromatic software and the main purpose is to make the fine astrometry and the distorsion correction astronomical images. In principle, SCAMP needs ATLAS library to be able to work (that is what the documentation says). However, we had some problems with ATLAS libraries on Mac OS system, and due to that, we set the option `--enable-openblas' in the configure step. By doing that, we are be able to install SCAMP with no problems. One dependency of SCAMP is `cdsclient', it has been also added with this commit. The `cdsclient' package is a set of C and shell routines which can be built on Unix stations or PCs running Linux, which once compiled allow to query some databases located at CDS or on mirrors over the network.
2019-04-17SExtractor is now included into the projectRaul Infante-Sainz-1/+18
With this commit, we add SExtractor to be installed into the project. It is a widely used program to detect object and build catalogues from astronomical images. We had some problems when installing it because it could not link with some ATLAS libraries. But, since we have OpenBLAS installed, we can use it to override the problem with ATLAS.
2019-04-17SWarp is now into the pipelineRaul Infante-Sainz-16/+25
SWarp resamples and co-adds together FITS images using any arbitrary astrometric projection defined in the WCS standard. It is a very useful program for astronomy and that is why we added it to the pipeline. With this commit, we also cite the paper for Astrometry-net that until now was missing.
2019-04-16Binutils is built on GNU/Linux as GCC dependency, not in MAC OSRaul Infante-Sainz-0/+2
Until this commit, we didn't install Binutils. However, we need `strip' for installing Netpbm, and `strip' is part of the Binutil software. With this commit, we include Binutils as a dependency of GCC for GNU/Linux systems. For Mac OS systems we create a symbolic link to `strip' just after the generation of the symbolic link to `gcc'.