aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2019-05-01Corrected typo in netpbm tarball extensionRaul Infante-Sainz-1/+1
In the last imported work about fixing all backslashes, the extension of `netpbm' tarball was not the correct one. Now we are using `.tar.gz' instead of `.tgz'. With this commit, we fix this typo by replacing the `.tgz' by `.tar.gz' in the rule of `netpbm'.
2019-05-01Problem in generic CMake rule correctedMohammad Akhlaghi-5/+9
In the recent correction of backslashes, I had missed adding an `&&' before the `rm' command of the generic CMake building rule (`cbuild' of `build-rules.mk'). With this commit, this has been corrected. A multi-threaded Make was also added to build OpenMPI (which takes long and is often built alone because it takes so long and other things depend on it) and the HDF5 library.
2019-04-30TAB-typo corrected in rule to build SCAMPMohammad Akhlaghi-1/+1
The TAB character wasn't used in the second line of the recipe to build SCAMP. This has been corrected with this commit.
2019-04-30New rule to build Coreutils, it is now built alongMohammad Akhlaghi-85/+108
Recently, after the installation of Coreutils, we added a step to manually run PatchELF over all the contents of the `$(ibdir)'. However, after a fresh test, this method failed: because while PatchELF was updating `mv', another program that was using `mv' couldn't do so and crashed. To fix this problem, Coreutils is now installed in a dummy directory also and the exact files that need `rpath' are identified and PatchELF is run on them (to be clean). Also, higher-level `basic.mk' software (higher-level than Bash), were re-organized so they depend on Coreutils. With this, we are no sure that when Coreutils is being built, it is the only program that is being built and PatchELF won't interfere with any other program. Also, OpenSSL and CMake were set to be bulit in parallel to speed up their build.
2019-04-30Imported some recent/parallel work, conflicts fixedMohammad Akhlaghi-62/+114
Especially because of the new convention regarding backslashes, there were many conflicts that are now fixed. But none were substantial.
2019-04-30End-of-line Backslashs no longer right under each otherMohammad Akhlaghi-792/+795
When we need to quote the new-line character we end the line with a backslash (`\'). Until now, our convention has been to put all such backslashes under each other to help in visual inspection. But this causes a lot of confusion in version control: if only one line's length is larger, the whole block will be marked as changed and thus makes it hard to visually see the actual change. It also makes debuging the code (adding some temporary lines) hard. With this commit, I went through all the files and tried to fix all such cases so only a single white space character is between the last command character and the backslash. Where there was an empty line (ending with a backslash, to help in visually separating the code into blocks), I put the backslash right under the previous line's. This completes task #15259.
2019-04-30Better configure checks to see if GCC can be builtRaul Infante-Sainz-26/+64
Until now, to test if GCC can use `sys/cdefs.h', we were building a small test program using it. But after testing on an Ubuntu 14.04, we noticed that the GCC test during the configure script passes, but GCC still can't be built. After some investigation we noticed its available in other directories, but during the build of GCC, those directories aren't used, and it only assumes it to be under `/usr/include'. So with this commit, we are only checking this particular location for this header, not a test run of GCC. After fixing this, we noticed that GCC's build crashed again because it couldn't link with `libc.a' (or `libc.so'). So we also added a for this library and added a new warning to inform the user what they might be able to do. Finally, we noticed that in one of the last steps of building GCC, we weren't using `&&', but `;', so the GCC name file would be built, even when the GCC build failed.
2019-04-30Running PatchELF on all programs after CoreutilsMohammad Akhlaghi-13/+33
Even though the Coreutils configure script says that it adds `rpath' to its executables, its executables don't have it. As a result, it goes to use the host operating system libraries, causing failures when they don't match with the template. Unfortunately after some tests with the configure script, I couldn't find any way to include `rpath'! Even though `-rpath-link' is present in all linking commands during Coreutils' build, the installed files still don't have it! So I was forced to use PatchELF. However, one problem is that Coreutils installs many programs, not just one like Bash or AWK. As a brute-force solution, with this commit, we are running PatchELF on all the installed programs. It won't hurt those that already have it, but it will fix all those that don't. With this commit, I am also making the following non-related small changes: - In `build-rules.mk', the `&&' characters were placed at the start of the line for better readability. - Bash, Readline and NCURSES are now built in parallel on systems that support it (during `basic.mk').
2019-04-29Added M4 as prerequisite of GMPRaul Infante-Sainz-1/+2
Until this commit, `m4' was not a prerequisite of `gmp'. However, during a test in Ubuntu 14.04 using one single core in the configure step, it crashed complaining about not having `m4' installed. With this commit, we set `m4' as a prerequisite of `gmp'.
2019-04-29Corrected spaces/TAB in some rulesRaul Infante-Sainz-61/+61
In some rules there were some spaces when we should use TAB, and also the other way around. We were using TAB instead using spaces. With this commit, we fix that spaces/TAB in the necessary rules.
2019-04-29Added numpy and six as prerequisites of h5pyRaul Infante-Sainz-2/+4
Until now, we were missing `numpy' and `six' as prerequisites of `h5py'. Because we did the configure step with all cores, `numpy' and `six' allways were built before `h5py' with any crash. However, in a single thread configure run we noticed that we were missing these two dependencies. With this commit, we fix this issue by setting `numpy' and `six' as prerequisites of `h5py'.
2019-04-29Modified copyright information of some filesRaul Infante-Sainz-0/+4
With this commit, the copyright information of some files have been modify in order to include the work of Raul Infante-Sainz.
2019-04-29Modified sip_tpv Python package prerequisitesRaul Infante-Sainz-1/+2
Until this commit, the prerequisites of `sip_tpv' were `mpmath' and `sympy'. However, the real prerequisites of `sip_tpv' are `astropy', `numpy' and `sympy'. With this commit, we fix this issue, and now `mpmath' is only a prerequisite of `sympy'.
2019-04-29Fixed a few architecture remnants in initialize.mkMohammad Akhlaghi-33/+3
In a few cases, `reproduce/analysis/make/initialize.mk' still assumed the old architecture. With this commit, they have been corrected.
2019-04-27Astrometry-net installation modified to avoid two reporting stepsRaul Infante-Sainz-0/+8
Until this commit, we had a problem in the installation of Astrometry-net in Mac OS systems. During the runing of the Makefile, it stopped at the reporting stage because it tried to do a couple of steps that in Mac OS are not possible: $ cat /proc/cpuinfo $ free The reason is that `/proc/cpuinfo' and `free' doesn't exist in Mac OS. With this commit, we override these two steps. Since they are only for reporting, they are not mandatory. So, we avoid doing them by using `sed' before running the Makefile.
2019-04-27Libpng updated (version 1.6.37)Raul Infante-Sainz-3/+1
Until this commit, we were using `libpng' version 1.4.22 (out dated). The reason is that with `libpng` versions > 1.5, there was some problems with `netpbm'. But we have update `netpbm' version and now there is no conflict betweem them. With this commit, we increase the version of `libpng' to have the most recent one.
2019-04-27Modified netpbm installation answers for Mac OS systemsRaul Infante-Sainz-8/+8
Until now, we installed `netpbm' by setting the default paths to libraries and headers. That worked fine for GNU/Linux systems, however, in Mac OS systems we have to explicity say to `netpbm' questions what are the paths to the libraries and headers. We found this problem because we tried to run `solve-field' to obtain the astrometry of some images, and then it goes to use `pnmfile', a program that failed because it was not properly linked with `libnetpmb'. With this commit, we fix this problem by answering properly the questions in the configure step of `netpbm' and setting explicity where we want to place the libraries and headers. With this commit, we also update `netpbm' version. To do that, we have to download the last version, for which it doesn't exist a tarball. So, we built this tarball and put it in the Mohammad's webpage.
2019-04-27Lack of semicolons in Binutils installation rule for Mac OS fixedRaul Infante-Sainz-7/+7
Until this commit, in Mac OS we were installing `binutils' as symbolic links of various programs (`as', `ar', `ld', `nm',` ps' and `ranlib'). However, there was a missing semicolon at the end of each line. As a consecuence, the installation of `binutils' on Mac OS systems failed. With this commit, we fix this problem by typing a semicolon at the end of each makelink line.
2019-04-25Added --enable-single option in FFTW installationRaul Infante-Sainz-1/+1
Until this commit, FFTW was installed by default, without the single precission option. However, when installing `sextractor' in a new system we found an error in the installation complaining about not having single precission files of FFTW. More explicity the error was: "FFTW single precision library files not found in [...]". With this commit, we fix this problem by passing the option `--enable-single' in the installation of FFTW.
2019-04-24Added copyright notice for sip_tpv.texMohammad Akhlaghi-1/+7
The BibTeX data for `sip_tpv' didn't have a copyright notice, so one was added for it.
2019-04-24Imported work on mpmath, SymPy and sip_tpv, no conflictsMohammad Akhlaghi-0/+68
There wasn't any conflict in this merge.
2019-04-24Added paper citation of sip_tpv Python packageRaul Infante-Sainz-4/+22
Until now, we were not citing the paper of `sip_tpv' package. With this commit, we have been fix this issue.
2019-04-24Removed sip_tpv from TARGETS, now it is an optional packageRaul Infante-Sainz-1/+1
With this commit, we let the Python package `sip_tpv' to be optional in order to not install it by default. It is a very specific package and I forgot to remove it from `TARGETS.mk' in the previous commit.
2019-04-23Python package sip_tpv added into the templateRaul Infante-Sainz-1/+10
With this commit, we add `sip_tpv' Python package into the template. This is a small package to convert SIP distorsion coefficients into PV distorsion coefficients, and the other way around. This package is useful in a astronomical context, specially when `swarp' is going to be used in order to resample images. The reason is that `swarp' only can understand PV distorsion coefficients.
2019-04-23Python package SymPy added into the templateRaul Infante-Sainz-6/+29
With this commit, we add `sympy' Python package into the template. This is a package to do symbolic mathematics. The motivation is that it is a prerequisite of `sip_tpv' Python package, which is useful to convert SIP distorsion coefficients into PV coefficients (in the context of astronomical images). However, the availability of `sympy' in the template will be useful for anyone interested in this package.
2019-04-23Python package mpmath added into the templateRaul Infante-Sainz-1/+19
With this commit, we add `mpmath' Python package into the template. This package is a prerequisite of `sympy', a package to do symbolic mathematics. The motivation of adding this package is because it is a dependency of `sympy', which is more widely used into the Python science community.
2019-04-23Bash updated with patched tarball (version 5.0.7)Mohammad Akhlaghi-5/+27
Until now we were using the official tarball of GNU Bash. However, Bash is distributed using patches, not a public version controlled history. So to implement newer features of Bash, its necessary to apply those patches and make the tarball ourselves. With this commit, we have done just that: we used the 7 patches that have been released since version 5.0.0 and made a tarball to use for this template. The instructions on how to make the patched tarball are also given above the Bash build rule.
2019-04-23Awk, coreutils and sed are now prerequisites of metastoreRaul Infante-Sainz-2/+9
Until now, `metastore' did not depend on the necessaries programs that we use to install it (`awk', `coreutils' and `sed'). They are not official dependencies of `metastore', but we need them to install it. With this commit, we put these programs as prerequisites of `metastore' in order to be able to install it without any problem.
2019-04-22High-level software now specified in TARGETS.mkMohammad Akhlaghi-207/+259
Until now, to specify which high-level software you want the project to contain, it was necessary to go into the `high-level.mk' Makefile that is complicated and can create bugs. With this commit, a new `reproduce/software/config/installation/TARGETS.mk' file has been created that is easily/cleanly in charge of documenting the final high-level software that must be built for the project. Also, until now, FFTW was set as a dependency of Numpy while we couldn't actually get Numpy to use it! It was just there for future reference and to justify its build rule. But now that many software won't be built and there is no problem with having rules even though a project might not use them, it has been removed.
2019-04-22Git, Metastore, cURL and Libbsd moved to basic softwareMohammad Akhlaghi-119/+126
Git and Metastore are very basic and fundamental tools for the template, so to keep things clean (let the `high-level.mk' software only represent optional software in the template), these two software (and their dependencies: `cURL' and `Libbsd') will now be built in `basic.mk'.
2019-04-22Imported recent work on several astronomy packagesMohammad Akhlaghi-30/+286
With this commit, Raul's work on the installation of several astronomy software is implemented in the main template.
2019-04-22Removed ATLAS as a prerequisite of ScampRaul Infante-Sainz-4/+12
Until this commit, ATLAS was a prerequisite of Scamp. The documentation says that. However, we have been able to install Scamp without having ATLAS installed. As a consecuence, ATLAS does not have to be a prerequisite of Scamp anymore. With this commit, we remove ATLAS as prerequisite of Scamp. We also put available software in the template as optional because not all people are going to use these software.
2019-04-22SCAMP and cdsclient have been added into the projectRaul Infante-Sainz-5/+64
With this commit, we add SCAMP into the project. This program is part of the Astromatic software and the main purpose is to make the fine astrometry and the distorsion correction astronomical images. In principle, SCAMP needs ATLAS library to be able to work (that is what the documentation says). However, we had some problems with ATLAS libraries on Mac OS system, and due to that, we set the option `--enable-openblas' in the configure step. By doing that, we are be able to install SCAMP with no problems. One dependency of SCAMP is `cdsclient', it has been also added with this commit. The `cdsclient' package is a set of C and shell routines which can be built on Unix stations or PCs running Linux, which once compiled allow to query some databases located at CDS or on mirrors over the network.
2019-04-17SExtractor is now included into the projectRaul Infante-Sainz-1/+37
With this commit, we add SExtractor to be installed into the project. It is a widely used program to detect object and build catalogues from astronomical images. We had some problems when installing it because it could not link with some ATLAS libraries. But, since we have OpenBLAS installed, we can use it to override the problem with ATLAS.
2019-04-17Corrected bibtex entry for Astrometry-net and SwarpRaul Infante-Sainz-13/+12
Until now, there were erros in the citation of Astrometry-net and Scamp papers. With this commit, we fix these problems. The Swarp bibtex has also been modify to follow the stetic of the citation style we have right now in the project. We also added the `dependency-bib.tex' as a prerequisite of `paper.bbl'.
2019-04-17SWarp is now into the pipelineRaul Infante-Sainz-42/+66
SWarp resamples and co-adds together FITS images using any arbitrary astrometric projection defined in the WCS standard. It is a very useful program for astronomy and that is why we added it to the pipeline. With this commit, we also cite the paper for Astrometry-net that until now was missing.
2019-04-16Binutils is built on GNU/Linux as GCC dependency, not in MAC OSRaul Infante-Sainz-0/+2
Until this commit, we didn't install Binutils. However, we need `strip' for installing Netpbm, and `strip' is part of the Binutil software. With this commit, we include Binutils as a dependency of GCC for GNU/Linux systems. For Mac OS systems we create a symbolic link to `strip' just after the generation of the symbolic link to `gcc'.
2019-04-16Typo corrections in Astrometry-net dependency rulesRaul Infante-Sainz-14/+14
Due to the copy/paste of rules from other files, in some rules there were some spaces insteand of tab. There were also a lack of semicolon in the building of CC, and bad extensions in various tarballs. With this commit, all of these typos have been fixed.
2019-04-16Astrometry-net and all its dependencies are now in the projectRaul Infante-Sainz-6/+72
With this commit, we include Astrometry-net software and one remaining dependency of it (Swig). In principle it should work as far as we tested all of this software in GNU/Linux, but we need to test also in Mac OS. As a result, this commit is just for setting all the rules and dependencies, but more tests are necessaries to ensure it works properly, specially in Mac OS systems.
2019-04-16Netpbm and its dependencies are now includedRaul Infante-Sainz-13/+55
With this commit, the installation of `netpbm' has been included. This software has a crazy dialogue installation that we override by giving to it the answers (they differs on GNU/Linux and Mac OS systems). `libxml2' also has been built (a remaining dependency of `netpbm'). In this commit, `libpng' version has been downgraded because it is required by `netpbm'. The motivation of installing `netpbm' is that it is a dependency of Astrometry-net software.
2019-04-16CC symbolic link to GCC built after GCC installationRaul Infante-Sainz-0/+2
Until now, we did not have CC. This is an obsolete way of calling C Compiler, nowadays it is GCC. However, there could be some software that is still using this convention (for example, `netpbm'). With this commit, we make the symbolic link `cc' pointing to the installed `gcc'.
2019-04-16Cairo library and its dependency Pixman, are now includedRaul Infante-Sainz-1/+18
In this commit we add Cairo library. The motivation of including this library is because it is a dependency of Astrometry-net (which is a common software used in astronomy projects). In principle it will not be build by default by de pipeline, but we will keep the rule just in case it is needed. Pixman is another library which is a prerequisite of Cairo, it is also built with this commit.
2019-04-16Symbolic link to Python created, using `python' instead of `pythonX'Raul Infante-Sainz-9/+10
Until this commit, we were using `python3' when calling Python (because we were using Python version 3.6.8). This will force us to change the name in the future. For example, when `python4' were available and into the pipeline. With this commit, at the end of the Python installation it creates a symbolic link to the Python bin executable with the new name `python'. As a consecuence, whatever version of Python was installed, into the project we will use allways `python' to invoke it.
2019-04-15Minor typo corrections in README-hacking.mdMohammad Akhlaghi-3/+7
In two places, I had mistakenly put a <'> instead of a <`>, causing bad highlighting in the markdown rendering. They have been corrected. Also, one long line in was broken up into several.
2019-04-15Correction in customization checklistMohammad Akhlaghi-22/+22
Until now, the customization checklist of `README-hacking.md' had the same name for the base template's remote and branch. This was confusing and would cause Git to print a warning. With this commit, like before, the template's remote is now called `template-origin', and `template' is only the branch name.
2019-04-15Template's main branch is now masterMohammad Akhlaghi-25/+44
Until now, the main template branch was called `template'. However, the standard Git convention is that the main branch of a project be called `master'. Many systems rely on this default and it is also easier for new users (who have been accustomed to this convention). So with this commit, the main template branch is `master', but in `README-hacking.mk', we instruct the users on how to rename it to `template' as part of their customization. This is infact better, because when we are actually developing the template in a separate fork, we can refer/use the `master' branch like any other project. And when we are working on a project that uses this template, we will be referring to the main template branch as `template'.
2019-04-15New architecture to separate software-building and analysis stepsMohammad Akhlaghi-360/+429
Until now, the software building and analysis steps of the pipeline were intertwined. However, these steps (of how to build a software, and how to use it) are logically completely independent. Therefore with this commit, the pipeline now has a new architecture (particularly in the `reproduce' directory) to emphasize this distinction: The `reproduce' directory now has the two `software' and `analysis' subdirectories and the respective parts of the previous architecture have been broken up between these two based on their function. There is also no more `src' directory. The `config' directory for software and analysis is now mixed with the language-specific directories. Also, some of the software versions were also updated after some checks with their webpages. This new architecture will allow much more focused work on each part of the pipeline (to install the software and to run them for an analysis).
2019-04-14Replaced all occurances of pipeline in textMohammad Akhlaghi-472/+457
All occurances of "pipeline" have been chanaged to "project" or "template" withint the text (comments, READMEs, and comments) of the template. The main template branch is now also named `template'. This was all because `pipeline' is too generic and couldn't be distinguished from the base, and customized project.
2019-04-14Corrected copyright information for .file-metadataMohammad Akhlaghi-1/+2
Since `.file-metadata' is a binary file, we can't include a copyright inside of it so we have to use `README.md' to mention its copyright and license notice. However, this was not done clearly and is now corrected.
2019-04-14Added citation for FFTWMohammad Akhlaghi-1/+21
Until now we weren't including the citation for FFTW (one of the template's optional packages). With this commit, it is added.