diff options
Diffstat (limited to 'reproduce')
| -rw-r--r-- | reproduce/config/pipeline/dependency-texlive.mk | 14 | ||||
| -rw-r--r-- | reproduce/config/pipeline/dependency-versions.mk | 1 | ||||
| -rw-r--r-- | reproduce/src/make/Top-Makefile | 25 | ||||
| -rw-r--r-- | reproduce/src/make/dependencies-basic.mk | 11 | ||||
| -rw-r--r-- | reproduce/src/make/dependencies.mk | 90 | ||||
| -rw-r--r-- | reproduce/src/make/initialize.mk | 6 | ||||
| -rw-r--r-- | reproduce/src/make/paper.mk | 6 |
7 files changed, 117 insertions, 36 deletions
diff --git a/reproduce/config/pipeline/dependency-texlive.mk b/reproduce/config/pipeline/dependency-texlive.mk new file mode 100644 index 0000000..9d7365f --- /dev/null +++ b/reproduce/config/pipeline/dependency-texlive.mk @@ -0,0 +1,14 @@ +# Necessary packages to install in TeX Live. +# +# If any extra TeX package is necessary to build your paper, just add its +# name to this variable (you can check in `ctan.org' to find the official +# name). +# +# Note on `tex' and `fancyhdr': These two packages are installed along with +# the basic installation scheme that we used to install tlmgr, they will be +# ignored in the `tlmgr install' command, but will be used later when we +# want their versions. +texlive-packages = tex fancyhdr ec newtx fontaxes xkeyval etoolbox xcolor \ + setspace caption footmisc datetime fmtcount titlesec \ + preprint ulem biblatex biber logreq pgf pgfplots fp \ + courier tex-gyre txfonts times diff --git a/reproduce/config/pipeline/dependency-versions.mk b/reproduce/config/pipeline/dependency-versions.mk index c123f55..07f755c 100644 --- a/reproduce/config/pipeline/dependency-versions.mk +++ b/reproduce/config/pipeline/dependency-versions.mk @@ -17,6 +17,7 @@ lzip-version = 1.20 make-version = 4.2.90 sed-version = 4.5 tar-version = 1.30 +which-version = 2.21 xz-version = 5.2.4 # Libraries diff --git a/reproduce/src/make/Top-Makefile b/reproduce/src/make/Top-Makefile index 5d94766..abd0f45 100644 --- a/reproduce/src/make/Top-Makefile +++ b/reproduce/src/make/Top-Makefile @@ -92,17 +92,20 @@ tex/pipeline.tex: $(foreach f, initialize \ delete-me \ , $(mtexdir)/$(f).tex) - # If no PDF is requested, then just exit here. -ifeq ($(pdf-build-final),) - @echo - @echo - @echo "-----" - @echo "Everything is OK until this point, but not building PDF." - @echo "To do so, give a value to the 'pdf-build-final' variable." - @echo "It is defined in 'reproduce/config/pipeline/pdf-build.mk'." - @echo - @exit 1 -endif + # If no PDF is requested, or if LaTeX isn't available, don't + # continue to building LaTeX. + @if ! latex --version &> /dev/null || [ x$(pdf-build-final) = x ]; then + echo + echo "-----" + echo "The processing has COMPLETED SUCCESSFULLY! But we won't be" + echo "building the final LaTeX-built PDF." + echo + echo "To do so, make sure you have LaTeX within the pipeline and" + echo "give a value to the 'pdf-build-final' variable. It is defined" + echo "in 'reproduce/config/pipeline/pdf-build.mk'." + echo + exit 1 + fi # Merge all the TeX macros that are prepared for building the PDF. @cat $(mtexdir)/*.tex > $@ diff --git a/reproduce/src/make/dependencies-basic.mk b/reproduce/src/make/dependencies-basic.mk index 45a4192..dcc0b59 100644 --- a/reproduce/src/make/dependencies-basic.mk +++ b/reproduce/src/make/dependencies-basic.mk @@ -92,6 +92,7 @@ tarballs = $(foreach t, bash-$(bash-version).tar.gz \ lzip-$(lzip-version).tar.gz \ make-$(make-version).tar.lz \ tar-$(tar-version).tar.gz \ + which-$(which-version).tar.gz \ xz-$(xz-version).tar.gz \ zlib-$(zlib-version).tar.gz \ , $(tdir)/$(t) ) @@ -111,6 +112,7 @@ $(tarballs): $(tdir)/%: elif [ $$n = lzip ]; then w=http://download.savannah.gnu.org/releases/lzip; \ elif [ $$n = make ]; then w=http://akhlaghi.org/src; \ elif [ $$n = tar ]; then w=http://ftp.gnu.org/gnu/tar; \ + elif [ $$n = which ]; then w=http://ftp.gnu.org/gnu/which; \ elif [ $$n = xz ]; then w=http://tukaani.org/xz; \ elif [ $$n = zlib ]; then w=http://www.zlib.net; \ else \ @@ -218,6 +220,14 @@ $(ibdir)/tar: $(tdir)/tar-$(tar-version).tar.gz \ +# GNU Which: +$(ibdir)/which: $(tdir)/which-$(which-version).tar.gz + $(call gbuild,$(subst $(tdir)/,,$<), which-$(which-version), static) + + + + + # GNU Make: Unfortunately it needs dynamic linking in two instances: when # loading objects (dynamically linked libraries), or when using the # `getpwnam' function (for tilde expansion). The first can be disabled with @@ -233,6 +243,7 @@ $(ibdir)/make: $(tdir)/make-$(make-version).tar.lz \ # GNU Bash $(ibdir)/bash: $(tdir)/bash-$(bash-version).tar.gz \ + $(ibdir)/which \ $(ibdir)/make ifeq ($(static_build),yes) $(call gbuild,$(subst $(tdir)/,,$<), bash-$(bash-version), , \ diff --git a/reproduce/src/make/dependencies.mk b/reproduce/src/make/dependencies.mk index 70b0a9e..fe5fb19 100644 --- a/reproduce/src/make/dependencies.mk +++ b/reproduce/src/make/dependencies.mk @@ -32,6 +32,7 @@ # Top level environment include reproduce/config/pipeline/LOCAL.mk include reproduce/src/make/dependencies-build-rules.mk +include reproduce/config/pipeline/dependency-texlive.mk include reproduce/config/pipeline/dependency-versions.mk ddir = $(BDIR)/dependencies @@ -42,7 +43,7 @@ ildir = $(BDIR)/dependencies/installed/lib # Define the top-level programs to build (installed in `.local/bin', so for # Coreutils, only one of its executables is enough). -top-level-programs = ls gawk gs grep libtool sed git tex astnoisechisel +top-level-programs = ls gawk gs grep libtool sed git latex astnoisechisel all: $(foreach p, $(top-level-programs), $(ibdir)/$(p)) # Other basic environment settings. @@ -226,7 +227,7 @@ $(ibdir)/gs: $(tdir)/ghostscript-$(ghostscript-version).tar.gz \ $(call gbuild,$(subst $(tdir)/,,$<), ghostscript-$(ghostscript-version)) $(ibdir)/git: $(tdir)/git-$(git-version).tar.xz \ - $(ibdir)/ls + $(ibdir)/ls $(call gbuild,$(subst $(tdir)/,,$<), git-$(git-version), static) $(ibdir)/astnoisechisel: $(tdir)/gnuastro-$(gnuastro-version).tar.lz \ @@ -242,21 +243,74 @@ $(ibdir)/astnoisechisel: $(tdir)/gnuastro-$(gnuastro-version).tar.lz \ static, --enable-static=yes --enable-shared=no, -j8, \ make check -j8) -$(ibdir)/tex: - - # First we'll download the tarball. Note that since the most recent - # installer is downloaded by day, the installer's version is hard - # to configure at this stage. - #wget -O$(tdir)/install-tl-unx.tar.gz \ - # http://mirror.ctan.org/systems/texlive/tlnet/install-tl-unx.tar.gz +$(ibdir)/latex: reproduce/config/pipeline/dependency-texlive.mk - # Unpack, enter the directory and run the installer. + # We'll need the current directory later down. topdir=$$(pwd) - cd $(ddir) - tar xf $(tdir)/install-tl-unx.tar.gz - cd install-tl-* - sed -e's|@installdir[@]|$(idir)|g' -e's|@topdir[@]|'"$$topdir"'|g' \ - $$topdir/reproduce/config/pipeline/texlive.conf > texlive.conf - ./install-tl --profile=texlive.conf - cd .. - rm -rf install-tl-* + + # First, if necessary, we'll download the tarball. Note that since + # a new version of the installer is created every day, the + # installer's version is hard to configure at this stage and is + # mostly irrelevant. + if $(ibdir)/tlmgr --version &> /dev/null; then + echo "TeX Live manager ('tlmgr') is already installed." + else + if wget -O$(tdir)/install-tl-unx.tar.gz \ + http://mirror.ctan.org/systems/texlive/tlnet/install-tl-unx.tar.gz + then + # Unpack, enter the directory, and do a basic installation. + cd $(ddir) + rm -rf install-tl-* + tar xf $(tdir)/install-tl-unx.tar.gz + cd install-tl-* + sed -e's|@installdir[@]|$(idir)|g' -e's|@topdir[@]|'"$$topdir"'|g' \ + $$topdir/reproduce/config/pipeline/texlive.conf > texlive.conf + ./install-tl --profile=texlive.conf + cd .. + rm -rf install-tl-* + + # Put a symbolic link of the TeX Live executables in + # `ibdir'. For `latex' do a copy, because it is the target of + # this rule and it won't cause problems. + ln -fs $(idir)/texlive/20*/bin/*/* $(ibdir)/ + rm $@ + cp $(idir)/texlive/20*/bin/*/latex $@ + else + echo "Not able to download TeX Live installer" > $@ + fi + fi + + # In scenarios like having no internet on the first run, its + # possible to get to this point without actually having `tlmgr' + # ready for usage. Since the pipeline can still do its processing + # without building the final PDF, we don't want to stop the build. + if $(ibdir)/tlmgr --version &> /dev/null; then + + # Install all the extra necessary packages. If LaTeX complains + # about not finding a package, simply run the following command + # to find which package its in, then add it to the + # `texlive-packages' variable. + # + # tlmgr info XXXXXX.sty + tlmgr install $(texlive-packages) + + # Make a symbolic link of all the TeX Live executables in the bin + # directory so we don't have to modify `PATH'. + ln -fs $(idir)/texlive/20*/bin/*/* $(ibdir)/ + + # Get all the necessary versions. + tv=$(ddir)/texlive-versions.tex + texlive=$$(pdflatex --version | awk 'NR==1' | sed 's/.*(\(.*\))/\1/' \ + | awk '{print $$NF}'); + echo "\newcommand{\\texliveversion}{$$texlive}" > $$tv + + # LaTeX Package versions. + tlmgr info $(texlive-packages) --only-installed | awk \ + '$$1=="package:" {version=0; \ + if($$NF=="tex-gyre") name="texgyre"; \ + else name=$$NF} \ + $$1=="cat-version:" {version=$$NF} \ + $$1=="cat-date:" {if(version==0) version=$$2; \ + printf("\\newcommand{\\tex%sversion}{%s}\n",\ + name, version)}' >> $$tv + fi diff --git a/reproduce/src/make/initialize.mk b/reproduce/src/make/initialize.mk index 943efdd..9639c79 100644 --- a/reproduce/src/make/initialize.mk +++ b/reproduce/src/make/initialize.mk @@ -72,10 +72,10 @@ curdir := $(shell echo $$(pwd)) .ONESHELL: .SHELLFLAGS = -ec SHELL := .local/bin/bash +PATH := $(curdir)/.local/bin LD_LIBRARY_PATH := $(curdir)/.local/lib LDFLAGS := -L$(curdir)/.local/lib CPPFLAGS := -I$(curdir)/.local/include -PATH := $(curdir)/.local/bin:$(shell ls -d $$(pwd)/.local/texlive/2018/bin/*) @@ -208,6 +208,7 @@ $(mtexdir)/initialize.tex: | $(mtexdir) $(call pvcheck, make, $(make-version), GNU Make, makeversion) $(call pvcheck, sed, $(sed-version), GNU SED, sedversion) $(call pvcheck, tar, $(tar-version), GNU Tar, tarversion) + $(call pvcheck, which, $(which-version), GNU Which, whichversion) $(call pvcheck, xz, $(xz-version), XZ Utils, xzversion) # Bzip2 prints its version in standard error, not standard output! @@ -233,3 +234,6 @@ $(mtexdir)/initialize.tex: | $(mtexdir) $(call lvcheck, wcslib/wcsconfig.h, $(wcslib-version), WCSLIB, \ wcslibversion) $(call lvcheck, zlib.h, $(zlib-version), zlib, zlibversion) + + # TeX versions + cat $(BDIR)/dependencies/texlive-versions.tex >> $@ diff --git a/reproduce/src/make/paper.mk b/reproduce/src/make/paper.mk index aec29c7..79d7722 100644 --- a/reproduce/src/make/paper.mk +++ b/reproduce/src/make/paper.mk @@ -38,9 +38,6 @@ $(texbdir)/paper.bbl: tex/references.tex \ | $(tikzdir) $(texbdir) tex/pipeline.tex - # To find LaTeX (which currently isn't internally installed). - #PATH=$(sys-path) - # We'll run LaTeX first to generate the `.bcf' file (necessary for # `biber') and then run `biber' to generate the `.bbl' file. p=$$(pwd); @@ -64,9 +61,6 @@ $(texbdir)/paper.bbl: tex/references.tex \ paper.pdf: tex/pipeline.tex paper.tex $(texbdir)/paper.bbl \ | $(tikzdir) $(texbdir) - # To find LaTeX (which currently isn't internally installed). - #PATH=$(sys-path) - # Go into the top TeX build directory and make the paper. p=$$(pwd) export TEXINPUTS=$$p:$$TEXINPUTS |