aboutsummaryrefslogtreecommitdiff
path: root/reproduce/analysis
diff options
context:
space:
mode:
Diffstat (limited to 'reproduce/analysis')
-rw-r--r--reproduce/analysis/config/gnuastro/astbuildprog.conf16
-rw-r--r--reproduce/analysis/config/gnuastro/astconvertt.conf33
-rw-r--r--reproduce/analysis/config/gnuastro/aststatistics.conf36
-rw-r--r--reproduce/analysis/config/gnuastro/gnuastro.conf43
-rw-r--r--reproduce/analysis/make/initialize.mk4
-rw-r--r--reproduce/analysis/make/top-make.mk2
-rw-r--r--reproduce/analysis/make/top-prepare.mk2
7 files changed, 132 insertions, 4 deletions
diff --git a/reproduce/analysis/config/gnuastro/astbuildprog.conf b/reproduce/analysis/config/gnuastro/astbuildprog.conf
new file mode 100644
index 0000000..7adb4d1
--- /dev/null
+++ b/reproduce/analysis/config/gnuastro/astbuildprog.conf
@@ -0,0 +1,16 @@
+# BuildProgram's configuration file depends on the build and is installed
+# along with the rest of Gnuastro. So we'll set any specific configuration
+# we want here, then import those.
+#
+# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and
+# this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+# To keep the program's compiled excutable file, comment this line.
+deletecompiled 1
+
+# Import the built configuration file
+config .local/etc/astbuildprog.conf \ No newline at end of file
diff --git a/reproduce/analysis/config/gnuastro/astconvertt.conf b/reproduce/analysis/config/gnuastro/astconvertt.conf
new file mode 100644
index 0000000..770ac39
--- /dev/null
+++ b/reproduce/analysis/config/gnuastro/astconvertt.conf
@@ -0,0 +1,33 @@
+# Default parameters (System) for ConvertType.
+# ConvertType is part of GNU Astronomy Utitlies.
+#
+# Use the long option name of each parameter followed by a value. The name
+# and value should be separated by atleast one white-space character (for
+# example ` '[space], or tab). Lines starting with `#' are ignored.
+#
+# For more information, please run these commands:
+#
+# $ astconvertt --help # Full list of options, short doc.
+# $ astconvertt -P # Print all options and used values.
+# $ info astconvertt # All options and input/output.
+# $ info gnuastro "Configuration files" # How to use configuration files.
+#
+# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and
+# this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+# Input:
+
+# Output:
+ quality 100
+ widthincm 10.0
+ borderwidth 1
+ output jpg
+
+# Flux:
+ invert 0
+
+# Common options
diff --git a/reproduce/analysis/config/gnuastro/aststatistics.conf b/reproduce/analysis/config/gnuastro/aststatistics.conf
new file mode 100644
index 0000000..90f985d
--- /dev/null
+++ b/reproduce/analysis/config/gnuastro/aststatistics.conf
@@ -0,0 +1,36 @@
+# Default parameters (System) for Statistics.
+# Statistics is part of GNU Astronomy Utitlies.
+#
+# Use the long option name of each parameter followed by a value. The name
+# and value should be separated by atleast one white-space character (for
+# example ` '[space], or tab). Lines starting with `#' are ignored.
+#
+# For more information, please run these commands:
+#
+# $ aststatistics --help # Full list of options, short doc.
+# $ aststatistics -P # Print all options and used values.
+# $ info aststatistics # All options and input/output.
+# $ info gnuastro "Configuration files" # How to use configuration files.
+#
+# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and
+# this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+# Input image:
+
+# Sky and its STD settings
+ khdu 1
+ meanmedqdiff 0.005
+ outliersigma 10
+ outliersclip 3,0.2
+ smoothwidth 3
+ sclipparams 3,0.1
+
+# Histogram and CFP settings
+ numasciibins 70
+ asciiheight 10
+ numbins 100
+ mirrordist 1.5
diff --git a/reproduce/analysis/config/gnuastro/gnuastro.conf b/reproduce/analysis/config/gnuastro/gnuastro.conf
new file mode 100644
index 0000000..82cb100
--- /dev/null
+++ b/reproduce/analysis/config/gnuastro/gnuastro.conf
@@ -0,0 +1,43 @@
+# Default values for the common options to all the programs in GNU
+# Astronomy Utitlies.
+#
+# IMPORTANT NOTE: The `lastconfig' option is very important in a
+# reproducible environment. Because we don't want any of Gnuastro's
+# programs to go into an un-controlled environment (user or system wide
+# configuration files).
+#
+# The rest of this configuration file is taken from the default Gnuastro
+# configuration from its source (`bin/gnuastro.conf').
+#
+# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org>
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and
+# this notice are preserved. This file is offered as-is, without any
+# warranty.
+
+# Local project settings (`config' has to be before `lastconfig').
+ config .gnuastro/gnuastro-local.conf
+ lastconfig 1
+
+# Input:
+ hdu 1
+ ignorecase 1
+ searchin name
+ stdintimeout 100000
+
+# Tessellation
+ tilesize 30,30
+ numchannels 1,1
+ remainderfrac 0.1
+ workoverch 0
+ interpmetric radial
+ interpnumngb 9
+ interponlyblank 0
+
+# Output:
+ tableformat fits-binary
+
+# Operating mode
+ quietmmap 0
+ minmapsize 2000000000
diff --git a/reproduce/analysis/make/initialize.mk b/reproduce/analysis/make/initialize.mk
index 3af0012..d8a8b73 100644
--- a/reproduce/analysis/make/initialize.mk
+++ b/reproduce/analysis/make/initialize.mk
@@ -308,8 +308,8 @@ $(packagecontents): paper.pdf | $(texdir)
# have this machine's local settings and are irrelevant for anyone
# else.
rm -rf $$dir/tex/build/build*
- rm $$dir/reproduce/software/config/installation/LOCAL.conf
- rm $$dir/reproduce/software/config/gnuastro/gnuastro-local.conf
+ rm $$dir/reproduce/software/config/LOCAL.conf
+ rm $$dir/reproduce/analysis/config/gnuastro/gnuastro-local.conf
# When submitting to places like arXiv, they will just run LaTeX
# once and won't run `biber'. So we need to also keep the `.bbl'
diff --git a/reproduce/analysis/make/top-make.mk b/reproduce/analysis/make/top-make.mk
index 6c940b8..43e88b2 100644
--- a/reproduce/analysis/make/top-make.mk
+++ b/reproduce/analysis/make/top-make.mk
@@ -21,7 +21,7 @@
# Load the local configuration (created after running
# `./project configure').
-include reproduce/software/config/installation/LOCAL.conf
+include reproduce/software/config/LOCAL.conf
diff --git a/reproduce/analysis/make/top-prepare.mk b/reproduce/analysis/make/top-prepare.mk
index 1778c6b..be7482c 100644
--- a/reproduce/analysis/make/top-prepare.mk
+++ b/reproduce/analysis/make/top-prepare.mk
@@ -25,7 +25,7 @@
# Load the local configuration (created after running
# `./project configure').
-include reproduce/software/config/installation/LOCAL.conf
+include reproduce/software/config/LOCAL.conf