Configuration stops if a dependency cannot be built

Until now, we used semicolons in Make's Call function definitions to build
the programs with GNU build system or CMake. Therefore, if any step of the
process failed, the rest would be ignorant to it and pass. Now, we use `&&'
to separate the different processing steps. In this way, we can be sure
that if any of them fails (during configuration, or building for example),
the pipeline will also stop and not continue to the next command (in the
same recipe).

Since the two Make Call functions were identical in the two
`dependencies-basic.mk' and `dependencies.mk', they are now in one file to
be imported in both.

This bug was found by Raul Infante Sainz.

4 files changed, 87 insertions, 43 deletions

diff --git a/reproduce/src/make/dependencies-basic.mk b/reproduce/src/make/dependencies-basic.mk
index dad9c5f..33b682b 100644
--- a/reproduce/src/make/dependencies-basic.mk
+++ b/reproduce/src/make/dependencies-basic.mk
@@ -38,6 +38,7 @@
 
 # Top level environment
 include reproduce/config/pipeline/LOCAL.mk
+include reproduce/src/make/dependencies-build-rules.mk
 include reproduce/config/pipeline/dependency-versions.mk
 
 ddir  = $(BDIR)/dependencies
@@ -67,7 +68,8 @@ $(tarballs): $(tdir)/%:
 	if [ -f $(DEPENDENCIES-DIR)/$* ]; then                            \
 	  cp $(DEPENDENCIES-DIR)/$* $@;                                   \
 	else                                                              \
-	  n=$$(echo $* | sed -e's/[0-9\-]/ /g' -e's/\./ /g'               \
+	  n=$$(echo $* | sed -e's/[0-9\-]/ /g'                            \
+	                     -e's/\./ /g'                                 \
 	               | awk '{print $$1}' );                             \
 	                                                                  \
 	  mergenames=1;                                                   \
@@ -91,20 +93,6 @@ $(tarballs): $(tdir)/%:
 
 
 
-# Build system rules
-# ------------------
-gbuild = cd $(ddir); rm -rf $(2); tar xf $(tdir)/$(1); cd $(2);      \
-         if [ $(3)x = staticx ]; then                                \
-         opts="CFLAGS=--static --disable-shared";                    \
-         fi;                                                         \
-         ./configure $$opts $(4) --prefix=$(idir); make $(5);        \
-         check="$(6)"; if [ x"$$check" != x ]; then $$check; fi;     \
-         make install; cd ..; rm -rf $(2)
-
-
-
-
-
 # GNU Bash
 # --------
 #
@@ -125,4 +113,4 @@ $(ibdir)/bash: $(tdir)/bash-$(bash-version).tar.gz
 # `--disable-load', but unfortunately I don't know any way to fix the
 # second. So, we'll have to build it dynamically for now.
 $(ibdir)/make: $(tdir)/make-$(make-version).tar.gz
-	$(call gbuild,$(subst $(tdir),,$<), make-$(make-version))
+	$(call gbuild,$(subst $(tdir),,$<), make-$(make-version), , , ,)
diff --git a/reproduce/src/make/dependencies-build-rules.mk b/reproduce/src/make/dependencies-build-rules.mk
new file mode 100644
index 0000000..a4d25aa
--- /dev/null
+++ b/reproduce/src/make/dependencies-build-rules.mk
@@ -0,0 +1,80 @@
+# Generic configurable recipes to build packages with GNU Build system or
+# CMake. This is Makefile is not intended to be run directly, it will be
+# imported into `dependencies-basic.mk' and `dependencies.mk'. They should
+# be activated with Make's `Call' function.
+#
+# Original author:
+#     Mohammad Akhlaghi <mohammad@akhlaghi.org>
+# Contributing author(s):
+#     Your name <your@email.address>
+# Copyright (C) 2018, Your Name.
+#
+# This Makefile is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation, either version 3 of the License, or (at your
+# option) any later version.
+#
+# This Makefile is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+# Public License for more details.
+#
+# A copy of the GNU General Public License is available at
+# <http://www.gnu.org/licenses/>.
+
+
+
+
+
+# IMPORTANT note
+# --------------
+#
+# Without using `&&', if a step fails, the process will continue. However,
+# in the `if' statements, we need `;' (particularly between `]' and
+# `then'). So we need to put any necessary checks at the start, then when
+# we start the process, every command will be separated by an `&&'.
+
+
+
+
+
+# GNU Build system
+# ----------------
+#
+# Arguments:
+#  1: Tarball full address.
+#  2: Directory name after unpacking.
+#  3: Set to `static' for a static build.
+#  4: Extra configuration options.
+#  5: Extra options/arguments to pass to Make.
+#  6: Step to run between `make' and `make install': usually `make check'.
+gbuild = if [ $(3)x = staticx ]; then                                   \
+         configopts="CFLAGS=--static --disable-shared";                 \
+         fi;                                                            \
+	 check="$(6)";                                                  \
+	 if [ x"$$check" = x ]; then check="echo Skipping-check"; fi;   \
+	 cd $(ddir) && rm -rf $(2) && tar xf $(tdir)/$(1) && cd $(2) && \
+         ./configure $$configopts $(4) --prefix=$(idir) &&              \
+	 make $(5) &&                                                   \
+	 $$check &&                                                     \
+         make install&&                                                 \
+	 cd ..&& rm -rf $(2)
+
+
+
+
+
+# CMake
+# -----
+cbuild = if [ $(3)x = staticx ]; then                                   \
+	   export CFLAGS="--static $$CFLAGS";                           \
+	   opts="-DBUILD_SHARED_LIBS=OFF";                              \
+	 fi;                                                            \
+	 cd $(ddir) && rm -rf $(2) && tar xf $(tdir)/$(1) && cd $(2) && \
+	 rm -rf my-build && mkdir my-build && cd my-build && opts="" && \
+	 cmake .. $$opts $(4) &&                                        \
+	 cmake --build . &&                                             \
+	 cmake .. -DCMAKE_INSTALL_PREFIX=$(idir) &&                     \
+	 cmake --build . --target install &&                            \
+	 cd ../.. &&                                                    \
+	 rm -rf $(2)
diff --git a/reproduce/src/make/dependencies.mk b/reproduce/src/make/dependencies.mk
index 1e29973..6da554c 100644
--- a/reproduce/src/make/dependencies.mk
+++ b/reproduce/src/make/dependencies.mk
@@ -31,6 +31,7 @@
 
 # Top level environment
 include reproduce/config/pipeline/LOCAL.mk
+include reproduce/src/make/dependencies-build-rules.mk
 include reproduce/config/pipeline/dependency-versions.mk
 
 ddir  = $(BDIR)/dependencies
@@ -148,32 +149,6 @@ $(tarballs): $(tdir)/%:
 
 
 
-# Build system rules
-# ------------------
-gbuild = cd $(ddir); rm -rf $(2); tar xf $(tdir)/$(1); cd $(2);      \
-         if [ $(3)x = staticx ]; then                                \
-         opts="CFLAGS=--static --disable-shared";                    \
-         fi;                                                         \
-         ./configure $$opts $(4) --prefix=$(idir); make $(5);        \
-         check="$(6)"; if [ x"$$check" != x ]; then $$check; fi;     \
-         make install; cd ..; rm -rf $(2)
-
-
-cbuild = cd $(ddir); rm -rf $(2); tar xf $(tdir)/$(1); cd $(2);      \
-	 rm -rf my-build; mkdir my-build; cd my-build; opts="";      \
-	 if [ $(3)x = staticx ]; then                                \
-	   export CFLAGS="--static $$CFLAGS";                        \
-	   opts="-DBUILD_SHARED_LIBS=OFF";                           \
-	 fi;                                                         \
-	 cmake .. $$opts $(4);                                       \
-	 cmake --build .;                                            \
-	 cmake .. -DCMAKE_INSTALL_PREFIX=$(idir);                    \
-	 cmake --build . --target install; cd ../..; rm -rf $(2)
-
-
-
-
-
 # Libraries
 # ---------
 $(ildir)/libcfitsio.a: $(tdir)/cfitsio-$(cfitsio-version).tar.gz         \
diff --git a/reproduce/src/make/initialize.mk b/reproduce/src/make/initialize.mk
index 563462f..d0f69a3 100644
--- a/reproduce/src/make/initialize.mk
+++ b/reproduce/src/make/initialize.mk
@@ -139,7 +139,8 @@ distclean: clean
         # `rm' program. So for this recipe, we'll use the host system's
         # `rm', not our own.
 	$(sys-rm) -rf $(BDIR) reproduce/build
-	$(sys-rm) -f Makefile $(pconfdir)/LOCAL.mk .gnuastro .local
+	$(sys-rm) -f Makefile .gnuastro .local
+	$(sys-rm) -f $(pconfdir)/LOCAL.mk $(gconfdir)/gnuastro-local.conf