aboutsummaryrefslogtreecommitdiff
path: root/reproduce/analysis
diff options
context:
space:
mode:
authorMohammad Akhlaghi <mohammad@akhlaghi.org>2022-08-25 17:02:29 +0200
committerMohammad Akhlaghi <mohammad@akhlaghi.org>2022-09-02 19:45:31 +0200
commit43186705c89e99fd4dbf5549ad031d27d77dfe6f (patch)
tree284b34727c4124eb1f77e11dce3a92ad682ad273 /reproduce/analysis
parent79ee52ed1e136fbd2592a5c2a058f73024d8b5b0 (diff)
Added server authentication and FITS DATASUM for verficiation
SUMMARY: Nothing special is necessary for your existing projects. This commit just addds two new features (read the commit description for more): 1. To provide a user and password to servers that need authentication before they allow downloading of proprietary data, 2. To use the FITS Standard's DATASUM for file verification (for cases where the file is not static on the server, and is generated upon receiving your download request). Until now, Maneage didn't have any infrastructure for databases that require authentication (through a user or password, when calling 'wget'). Furthermore, when the downloaded file is automatically generated by the server upon request, the server usually adds metadata (like file date, or query number and etc) in the header. Therefore the simple SHA256 checksum of the file would differ on every download! This made it very hard to verify if the data (not headers) are unchanged. With this commit, both these problems have been addressed: - Server authentication: the 'reproduce/software/config/LOCAL.conf' now contains three new variables for this purpose. With them, you can give your username and password, along with the authentication method of the server. The comments on top of these three variables give a full description of their usage. - Verifying only the data in a file (ignoring the headers): The 'reproduce/analysis/config/INPUTS.conf' now accepts two new optional variables for each input file using the FITS standard's DATASUM convention: 'INPUT-%-fitsdatasum' and 'INPUT-%-fitshdu'. If the SHA256 isn't specified for a file, Maneage will use these to verify the file. With the latter, you specify the HDU of the data you want to verify and with the former you give the DATASUM value for that HDU. As the name suggests, this is only valid for FITS files. If we find other formats that support a similar behavior, we can add this feature for those formats also. This is also thoroughly discussed in the comments of 'reproduce/analysis/config/INPUTS.conf'. This commit was done with the help of Pedram Ashofte Ardakani, Sepideh Eskandarlou and Mohammadreza Khellat.
Diffstat (limited to 'reproduce/analysis')
-rw-r--r--reproduce/analysis/config/INPUTS.conf115
-rw-r--r--reproduce/analysis/make/initialize.mk125
2 files changed, 172 insertions, 68 deletions
diff --git a/reproduce/analysis/config/INPUTS.conf b/reproduce/analysis/config/INPUTS.conf
index 75e24de..5970ae3 100644
--- a/reproduce/analysis/config/INPUTS.conf
+++ b/reproduce/analysis/config/INPUTS.conf
@@ -1,9 +1,10 @@
# This project's input file information (metadata).
#
# For each input (external) data file that is used within the project,
-# three variables are suggested here (two of them are mandatory). These
-# variables will be used by 'reproduce/analysis/make/download.mk' to import
-# the dataset into the project (within the build directory):
+# three variables are suggested here (only the verification variable is
+# strictly mandatory). These variables will be used by the download rule of
+# 'reproduce/analysis/make/initialize.mk' to import the dataset into the
+# project (within the build directory):
#
# - If the file already exists locally in '$(INDIR)' (the optional input
# directory that may have been specified at configuration time with
@@ -12,27 +13,53 @@
# files are large.
#
# - If the file doesn't exist in '$(INDIR)', or no input directory was
-# specified at configuration time, then the file is downloaded from a
-# specific URL.
+# specified at configuration time, then the file is downloaded from the
+# specified URL for that dataset.
#
# In both cases, before placing the file (or its link) in the build
-# directory, 'reproduce/analysis/make/download.mk' will check the SHA256
-# checksum of the dataset and if it differs from the pre-defined value (set
-# for that file, here), it will abort (since this is not the intended
-# dataset).
-#
-# Therefore, the two variables specifying the URL and SHA256 checksum of
-# the file are MANDATORY. The third variable (INPUT-%-size) showing the
-# human-readable size of the file (from 'ls -lh') is optional (but
-# recommended: because it gives future scientists to get a feeling of the
-# volume of data they need to input: will become important if the
-# size/number of files is large).
+# directory, the download rule of 'reproduce/analysis/make/initialize.mk'
+# will check the verification of the dataset and if it differs from the
+# pre-defined value (set for that file, here), it will abort (since this is
+# not the intended dataset).
#
+# Verification (two modes)
+# ------------------------
+# - SHA256 checksum. This will check the full contents of the file, and
+# is generic to any data format. However, if the server inserts custom
+# headers like the query date or query code and etc, this form of
+# validation is not useful: because every download will have different
+# headers. In such cases, you should use the other verification methods
+# below. In other words, this method is only good for files that are
+# "static" on the server (and left there unchanged). If the file is
+# generated at request time, the server usually inserts custom run-time
+# dependent headers; making it impossible to verify with an SHA
+# checksum of the whole file.
+# - The FITS Standard's 'DATASUM' (which will only check the data, not
+# the headers). According to the FITS standard, this sum ignores all
+# headers, and is only calculated on a HDU's data. By default, this
+# will require Gnuastro (which can easily calculate and return the
+# value on the command-line), and it assumes HDU number 1 (counting
+# from 0). You can modify the defaults by modifying the rule in
+# 'reproduce/analysis/make/initialize.mk'.
+#
+# Automatic writing of verification
+# ---------------------------------
+# In case you would like Maneage to find the checksum upon downloading, put
+# the string '--auto-replace--' instead of a checksum. This can be helpful
+# for large datasets; where downloading only for adding the checksum is not
+# easy/possible and can be buggy. In this scenario, upon downloading the
+# file its checksum will be calculated and will be replaced with the
+# '--auto-replace--' in this file. But since this file is under version
+# control, be sure to commit all the updated checksums after your downloads
+# are finished!
+#
+# Variable description
+# --------------------
# The naming convension is critical for the input files to be properly
-# imported into the project. In the patterns below, the '%' is the full
-# file name (including its suffix): for example in the demo input of this
-# file in the 'maneage' branch, we have 'INPUT-wfpc2.fits-sha256':
-# therefore, the input file (within the project's '$(indir)') is called
+# imported into Maneage. In the patterns below, the '%' is the full file
+# name (including its suffix): for example in the demo input of this file
+# in the 'maneage' branch, we have 'INPUT-wfpc2.fits-sha256': therefore,
+# the input file (within the project's '$(indir)') is called
# 'wfpc2.fits'. This allows you to simply set '$(indir)/wfpc2.fits' as the
# pre-requisite of any recipe that needs the input file: you will rarely
# (if at all!) need to use these variables directly.
@@ -40,23 +67,17 @@
# INPUT-%-sha256: The sha256 checksum of the file. You can generate the
# SHA256 checksum of a file with the 'sha256sum FILENAME'
# command (where 'FILENAME' is the name of your
-# file). this is very important for an automatic
-# verification of the file: that it hasn't changed
-# between different runs of the project (locally or in
-# the URL). There are more robust checksum algorithms
-# like the 'SHA' standards.
-#
-# AUTOMATIC CHEKSUM CALCULATION: In case you would like
-# Maneage to find the checksum upon downloading, put the
-# string '--auto-replace--' instead of a checksum. This
-# can be helpful for large datasets; where downloading
-# only for adding the checksum is not easy/possible and
-# can be buggy. In this scenario, upon downloading the
-# file its checksum will be calculated and will be
-# replaced with the '--auto-replace--' in this file. But
-# since this file is under version control, be sure to
-# commit all the updated checksums after your downloads
-# are finished!
+# file). Don't use this if you give the 'fitsdatasum'
+# keyvalue.
+#
+# INPUT-%-fitsdatasum: The FITS standard DATASUM value for HDU number 1
+# of the FITS file (counting from 0). Don't use this
+# if you give the 'sha256' keyword.
+#
+# INPUT-%-fitshdu: The HDU identifier (counter from 0, or name) to use
+# for the verification. This is only relevant in the
+# 'fitsdatasum' verification method and optional (if not
+# given, HDU number 1 is used; counting from 0).
#
# INPUT-%-url: The URL to download the file if it is not available
# locally. It can happen that during the first phases of
@@ -70,6 +91,13 @@
# good feeling of the necessary network and storage
# capacity that is necessary to start the project.
#
+# Therefore, the the verification variable is MANDATORY in any case. The
+# variable with a URL is only necessary if you do not have the file
+# locally. However, The size variable is optional (but recommended: because
+# it gives future scientists a feeling of the volume of data they need to
+# input to run your project: will become important if the size/number of
+# files is large).
+#
# The input dataset's name (that goes into the '%') can be different from
# the URL's file name (last component of the URL, after the last '/'). Just
# note that it is assumed that the local copy (outside of your project) is
@@ -87,7 +115,18 @@
-# Demo dataset used in the histogram plot (remove when customizing).
+# Demo dataset used in the histogram plot
+# ---------------------------------------
+#
+# Remove this part while you are entering your project's datasets.
+#
+# Since the demonstration dataset is a FITS file, we have also added the
+# two '$(INPUT-%-fits*)' variables as a demonstration. But they are
+# commented because the SHA256 method is also possible for this file (its
+# not generated on the server at query time; it is a static file on the
+# server).
INPUT-wfpc2.fits-size = 62K
INPUT-wfpc2.fits-url = https://fits.gsfc.nasa.gov/samples/WFPC2ASSNu5780205bx.fits
INPUT-wfpc2.fits-sha256 = 9851bc2bf9a42008ea606ec532d04900b60865daaff2f233e5c8565dac56ad5f
+#INPUT-wfpc2.fits-fitshdu = 0
+#INPUT-wfpc2.fits-fitsdatasum = 2218330266
diff --git a/reproduce/analysis/make/initialize.mk b/reproduce/analysis/make/initialize.mk
index eb5f2ff..7314184 100644
--- a/reproduce/analysis/make/initialize.mk
+++ b/reproduce/analysis/make/initialize.mk
@@ -63,15 +63,18 @@ pconfdir = reproduce/analysis/config
# loaded.
#
# If your project doesn't need any preparation, you can ignore this.
+#
+# The '-' behind the include commands is used for adding the files only if
+# it is possible (they exist). This is necessary because sometimes the user
+# will have only '*.conf' or '*.mk' files, or with 'make clean' (where the
+# preparation Makefile may call initialize.mk before the main
+# 'top-make.mk'). If the '-' is not used, Make will complain about not
+# finding these files.
ifeq (x$(project-phase),xprepare)
$(prepdir):; mkdir $@
else
-include $(bsdir)/preparation-done.mk
+-include $(bsdir)/preparation-done.mk
ifeq (x$(include-prepare-results),xyes)
-# The '-' behind the include is The '-' is used for adding the files only
-# if it is possible (they exist). This is necessary because sometimes the
-# user will have only '*.conf' or '*.mk' files. So, if the '-' is not used,
-# Make will complain about not finding these files.
-include $(prepdir)/*.mk $(prepdir)/*.conf
endif
endif
@@ -227,7 +230,7 @@ project-commit-hash := $(shell \
export LD_LIBRARY_PATH="$(installdir)/lib"; \
echo $$($(installdir)/bin/git describe --dirty --always --long); \
else echo NOGIT; fi)
-project-package-name := maneaged-$(project-commit-hash)
+project-package-name = maneaged-$(project-commit-hash)
project-package-contents = $(texdir)/$(project-package-name)
@@ -438,13 +441,15 @@ dist-software:
-# Download input data
-# --------------------
+# Import input data
+# -----------------
#
-# 'reproduce/analysis/config/INPUTS.conf' contains the input dataset
-# properties. In most cases, you will not need to edit this rule. Simply
-# follow the instructions of 'INPUTS.conf' and set the variables names
-# according to the described standards and everything should be fine.
+# The list files to be imported (downloaded from a server, or linked from a
+# local location), are listed in 'reproduce/analysis/config/INPUTS.conf'
+# along with their URLs and verification checksums. In most cases, you will
+# not need to edit this rule. Simply follow the instructions at the top of
+# 'INPUTS.conf' and set the variables names according to the described
+# standards and everything should be fine.
#
# TECHNICAL NOTE on the '$(foreach, n ...)' loop of 'inputdatasets': we are
# using several (relatively complex!) features particular to Make: In GNU
@@ -465,16 +470,60 @@ dist-software:
# progress at every moment.
$(indir):; mkdir $@
downloadwrapper = $(bashdir)/download-multi-try
-inputdatasets = $(foreach i, \
- $(patsubst INPUT-%-sha256,%, \
- $(filter INPUT-%-sha256,$(.VARIABLES))), \
- $(indir)/$(i))
+inputdatasets := $(foreach i, \
+ $(patsubst INPUT-%-sha256,%, \
+ $(filter INPUT-%-sha256,$(.VARIABLES))) \
+ $(patsubst INPUT-%-fitsdatasum,%, \
+ $(filter INPUT-%-fitsdatasum,$(.VARIABLES))), \
+ $(indir)/$(i))
$(inputdatasets): $(indir)/%: | $(indir) $(lockdir)
-# Set the necessary parameters for this input file as shell variables
-# (to help in readability).
- url=$(INPUT-$*-url)
- sha=$(INPUT-$*-sha256)
+# Starting rule with '@': In case there is a username or password
+# given for the database, we don't want the values to be printed in
+# the terminal as the pipeline is running. We are therefore starting
+# this recipe with an '@' (so Make doesn't print the used
+# commands). To help the user know what is happening (in case they
+# can't tell from the Wget outputs), we'll just start the recipe with
+# a notice on what is being imported.
+ @echo "Importing $@"
+
+# If a username or password has been provided, add them to the WGET
+# command. The two variables are defined in the local configuation
+# file 'reproduce/software/config/LOCAL.conf' that is not under
+# version control. Different servers may use different authentication
+# formats. If the default one doesn't work for your server, comment
+# it and uncomment the one that works. If your serve needs a
+# different kind of authentication format, please add it yourself. In
+# case you need a new format, we encourage you to send the format to
+# us using the link below:
+# https://savannah.nongnu.org/support/?group=reproduce&func=additem
+ authopt=""
+ if [ x"$(DATABASEAUTHTYPE)" != x ]; then
+ case "$(DATABASEAUTHTYPE)" in
+
+# Format: '--user=XXXX --password=YYYY'
+ userpass)
+ if [ x'$(DATABASEUSER)' != x ]; then
+ authopt="--user='$(DATABASEUSER)'"; fi
+ if [ x'$(DATABASEPASS)' != x ]; then
+ authopt="$$authopt --password='$(DATABASEPASS)'"; fi
+ ;;
+
+# Format: --post-data 'username=XXXX&password=YYYY'
+ postdata)
+ if [ x'$(DATABASEUSER)' != x ]; then
+ authopt="--post-data 'username=$(DATABASEUSER)"; fi
+ if [ x'$(DATABASEPASS)' != x ]; then
+ authopt="$$authopt""&password=$(DATABASEPASS)'";
+ else authopt="$$authopt'" # To close the single quote
+ fi
+ ;;
+
+# Unrecognized format.
+ *)
+ echo "Maneage: 'DATABASEAUTHTYPE' format not recognized! Please see the description of this variable in 'reproduce/software/config/LOCAL.conf' for the acceptable values."; exit 1;;
+ esac
+ fi
# Download (or make the link to) the input dataset. If the file
# exists in 'INDIR', it may be a symbolic link to some other place in
@@ -488,13 +537,29 @@ $(inputdatasets): $(indir)/%: | $(indir) $(lockdir)
ln -fs $$(readlink -f $(INDIR)/$*) $$unchecked
else
touch $(lockdir)/download
- $(downloadwrapper) "wget --no-use-server-timestamps -O" \
- $(lockdir)/download $$url $$unchecked
+ $(downloadwrapper) "wget $$authopt --no-use-server-timestamps -O" \
+ $(lockdir)/download $(INPUT-$*-url) $$unchecked
+ fi
+
+# Set the checksum related variables.
+ if [ x"$(INPUT-$*-sha256)" != x ]; then
+ suffix=sha256
+ sumin=$(INPUT-$*-sha256)
+ verifname="SHA256 checksum"
+ sum=$$(sha256sum $$unchecked | awk '{print $$1}')
+ elif [ x"$(INPUT-$*-fitsdatasum)" != x ]; then
+ suffix=fitsdatasum
+ sumin=$(INPUT-$*-fitsdatasum)
+ verifname="FITS standard DATASUM"
+ if [ x"$(INPUT-$*-fitshdu)" = x ]; then hdu=1;
+ else hdu="$(INPUT-$*-fitshdu)"; fi
+ sum=$$(astfits $$unchecked -h$$hdu --datasum | awk '{print $$1}')
+ else
+ echo "$@: checksum for verifyication not recognized!"; exit 1
fi
-# Check the checksum to see if this is the proper dataset.
- sum=$$(sha256sum $$unchecked | awk '{print $$1}')
- if [ $$sum = $$sha ]; then
+# Verify the input.
+ if [ $$sum = $$sumin ]; then
mv $$unchecked $@
echo "Integrity confirmed, using $@ in this project."
@@ -502,11 +567,11 @@ $(inputdatasets): $(indir)/%: | $(indir) $(lockdir)
else
# The user has asked to update the checksum in 'INPUTS.conf'.
- if [ $$sha = "--auto-replace--" ]; then
+ if [ $$sumin = "--auto-replace--" ]; then
# Put the updated 'INPUTS.conf' in a temporary file.
inputstmp=$@.inputs
- awk '{if($$1 == "INPUT-$*-sha256") \
+ awk '{if($$1 == "INPUT-$*-'$$suffix'") \
$$3="'$$sum'"; print}' \
$(pconfdir)/INPUTS.conf > $$inputstmp
@@ -520,10 +585,10 @@ $(inputdatasets): $(indir)/%: | $(indir) $(lockdir)
# Error on non-matching checksums.
else
echo; echo;
- echo "Wrong SHA256 checksum for input file '$*':"
+ echo "Wrong $$verifname for input file '$*':"
echo " File location: $$unchecked"; \
- echo " Expected SHA256 checksum: $$sha"; \
- echo " Calculated SHA256 checksum: $$sum"; \
+ echo " Expected $$verifname: $$sumin"; \
+ echo " Calculated $$verifname: $$sum"; \
echo; exit 1
fi
fi