Maneage'd AASTeX for American Astronomical Society journals

Until now, the core Maneage branch was very generic and customizing for
each separate journal required some time to prepare the LaTeX style.

With this commit, a first attempt at customization of Maneage for the LaTeX
styles of the AAS journals (AASTeX) has been implemented.

1 files changed, 50 insertions, 26 deletions

diff --git a/reproduce/analysis/make/initialize.mk b/reproduce/analysis/make/initialize.mk
index 9e8db4a..bce828a 100644
--- a/reproduce/analysis/make/initialize.mk
+++ b/reproduce/analysis/make/initialize.mk
@@ -49,7 +49,9 @@ installdir  = $(bsdir)/installed
 bashdir     = reproduce/analysis/bash
 pconfdir    = reproduce/analysis/config
 
-
+# Project-specific directories.
+figdir      = $(texdir)/figures
+$(figdir):; mkdir $@
 
 
 
@@ -248,7 +250,8 @@ project-package-contents = $(texdir)/$(project-package-name)
 # the project version which may change between two separate runs, even when
 # no file actually differs.
 .PHONY: all clean dist dist-zip dist-lzip texclean distclean \
-        $(project-package-contents) $(mtexdir)/initialize.tex
+        $(project-package-contents) $(mtexdir)/initialize.tex \
+        dist-singledir-onlypaper
 
 texclean:
 	rm -f *.pdf
@@ -313,7 +316,8 @@ $(project-package-contents): paper.pdf | $(texdir)
 	printf "\tpdflatex -shell-escape -halt-on-error paper\n" >> $$m
 	echo   "paper.bbl: tex/src/references.tex"               >> $$m
 	printf "\tpdflatex -shell-escape -halt-on-error paper\n" >> $$m
-	printf "\tbiber paper\n"                                 >> $$m
+	printf "\tbibtex paper\n"                                >> $$m
+	printf "\tpdflatex -shell-escape -halt-on-error paper\n" >> $$m
 	echo   ".PHONY: clean"                                   >> $$m
 	echo   "clean:"                                          >> $$m
 	printf "\trm -f *.aux *.auxlock *.bbl *.bcf\n"           >> $$m
@@ -367,21 +371,9 @@ $(project-package-contents): paper.pdf | $(texdir)
 	  cp tex/tikz/*.pdf $$dir/tex/tikz
 	fi
 
-#	When submitting to places like arXiv, they will just run LaTeX once
-#	and won't run 'biber'. So we need to also keep the '.bbl' file into
-#	the distributing tarball. However, BibLaTeX is particularly
-#	sensitive to versioning (a '.bbl' file has to be read by the same
-#	BibLaTeX version that created it). This is hard to do with
-#	non-up-to-date places like arXiv. Therefore, we thus just copy the
-#	whole of BibLaTeX's source (the version we are using) into the top
-#	tarball directory. In this way, arXiv's LaTeX engine will use the
-#	same BibLaTeX version to interpret the '.bbl' file. TIP: you can
-#	use the same strategy for other LaTeX packages that may cause
-#	problems on the arXiv server.
+#	The 'bbl' file is produced by BibTeX; and having it allows the user
+#	of the tarball to not have to re-create the bibliography.
 	cp tex/build/build/paper.bbl $$dir/
-	tltopdir=.local/texlive/maneage/texmf-dist/tex/latex
-	find $$tltopdir/biblatex/ -maxdepth 1 -type f -print0 \
-	     | xargs -0 cp -t $$dir
 
 #	Just in case the package users want to rebuild some of the figures
 #	(manually un-comment the 'makepdf' command we commented above),
@@ -393,7 +385,7 @@ $(project-package-contents): paper.pdf | $(texdir)
 #	PROJECT SPECIFIC
 #	----------------
 #	Put any project-specific distribution steps here.
-
+	cp tex/src/aasjournal.bst tex/src/aastex631.cls $$dir/
 #	----------------
 
 #	Clean temporary files that may have been created by text editors.
@@ -437,6 +429,42 @@ dist-software:
 	cd $(curdir)
 	mv $(bsdir)/$$dirname.tar.gz ./
 
+# Build a distribution directory with all the files in a single directory.
+dist-singledir-onlypaper:
+
+#	Set the output directory and if it exists delete it (so we can
+#	start with a clean directory).
+	outdir=$(badir)/dist-single-directory
+	if [ -d $$outdir ]; then rm -r $$outdir; fi
+	mkdir $$outdir
+
+#	Copy all the necessary files into the output directory.
+	cp paper.tex \
+	   tex/tikz/*.pdf \
+	   tex/src/aastex631.cls \
+	   tex/build/build/paper.bbl \
+	   tex/build/macros/project.tex \
+	   tex/src/preamble-maneage.tex \
+	   tex/src/preamble-project.tex \
+	   tex/src/preamble-pgfplots.tex \
+	   $$outdir/
+
+#	Copy all the macros from 'project.tex' into the output directory.
+	macros=$$(sed -e's|\\input{||' -e's|}||' \
+	              tex/build/macros/project.tex)
+	for m in $$macros; do cp $$m $$outdir/; done
+
+#	Correct the contents of the files.
+	sed -i -e's|\\newcommand{\\makepdf}{}|%\\newcommand{\\makepdf}{}|' \
+	       -e's|tex/src/preamble-maneage.tex|preamble-maneage.tex|' \
+	       -e's|tex/src/preamble-project.tex|preamble-project.tex|' \
+	       -e's|tex/build/macros/project.tex|project.tex|' \
+	       $$outdir/paper.tex
+	sed -i -e's|tex/src/preamble-pgfplots.tex|preamble-pgfplots.tex|' \
+	       $$outdir/preamble-project.tex
+	sed -i -e's|tex/build/macros/||' $$outdir/project.tex
+	sed -i -e's|tex/tikz/||' $$outdir/preamble-pgfplots.tex
+
 
 
 
@@ -685,6 +713,10 @@ $(mtexdir)/initialize.tex: | $(mtexdir)
 	echo "\newcommand{\projectgitrepo}{$(metadata-git-repository)}" >> $@
 	echo "\newcommand{\projectcopyrightowner}{$(metadata-copyright-owner)}" >> $@
 
+#	Gnuastro's version
+	v=$$(asttable --version | awk 'NR==1{print $$NF}')
+	echo "\newcommand{\gnuastroversion}{$$v}" >> $@
+
 #	Calculate the latest Maneage commit used to build this project:
 #	  - The project may not have the 'maneage' branch (for example
 #	    after cloning from a fork that didn't include it!). In this
@@ -714,11 +746,3 @@ $(mtexdir)/initialize.tex: | $(mtexdir)
 	fi
 	echo "\newcommand{\maneagedate}{$$d}" >> $@
 	echo "\newcommand{\maneageversion}{$$v}" >> $@
-
-#	----------------- delete the lines below this -------------------
-#	These lines are only intended for the default template's output, to
-#	demonstrate that is it important to put links in the PDF (for
-#	showing where your input data came from). Remove these lines as
-#	part of the initial customization of Maneage for your project.
-	echo "\\newcommand{\\wfpctwourl}{$(INPUT-wfpc2.fits-url)}" >> $@
-#	----------------- delete the lines above this -------------------