aboutsummaryrefslogtreecommitdiff
path: root/tex
AgeCommit message (Collapse)AuthorLines
2021-01-07Removed all \new highlights after submission of reviewMohammad Akhlaghi-2/+2
With the submission of the revision (which highlighted all the relevant parts to the points the referees raised in the submitted PDF) it is no longer necessary to highlight these parts. If we get another revision request, we can add new '\new' parts for highlighting.
2021-01-07Minor copyedits in appendices, e.g. parenthesesBoud Roukema-5/+7
This commit makes some minor fixes following the hardwired non-numerical solution to the cross-referencing issue between the main article and the supplement, such as fixing "lineage like lineage" and missing closing parentheses. From Mohammad: while re-basing the commit over the 'master' branch, I also added Boud'd name at the top of the copyright holders of the appendices.
2021-01-05appendix.bbl is now included in make dist tarballMohammad Akhlaghi-1/+1
Since the addition of the appendix bibliography we hadn't checked the 'make dist' command, as a result the PDF couldn't be built. With this commit, in the 'dist' rule, we are now also copying 'appendix.bbl' and the created tarball could build the PDF properly. Also the 'peer-review' directory is now also included in the tarball created by './project make dist'. I also found a small typo in the description of Occam (an 'a' was missing) and fixed it.
2021-01-05Polished main paper and appendices after a full re-readMohammad Akhlaghi-151/+193
In preparation for the submission of the revised manuscript, I went through the full paper and appendices one last time. The second appendix (reviewing existing reproducible solutions) in particular needed some attention because some of the tools weren't properly compared with the criteria. In the paper, I was also able to remove about 30 words, and bring our own count (which is an over-estimation already) to below 6250.
2021-01-04Edits on points raised by RaulMohammad Akhlaghi-10/+12
After his previous two commits, we discussed some of the points and I am making these edits following those. In particular the last statement about Madagascar "could have been more useful..." was changed to simply mention that mixing workflow with analysis is against the modularity principle. We should not judge its usefulness to the community (which is beyond our scope and would need an official survey). A few other minor edits were done here and there to clarify some of the points.
2021-01-04Very minor corrections to the necessity appendixRaul Infante-Sainz-13/+18
With this commit, I have corrected some minor typos of this appendix. They are very minor corrections.
2021-01-04Minor corrections to the existing solutions appendixRaul Infante-Sainz-87/+104
With this commit, I have corrected some minor typos of this appendix. In addition to that, I also put empty lines to separate subsections and subsubsections appropiately.
2021-01-03Spell check on main body and appendicesMohammad Akhlaghi-29/+29
I ran a simple Emacs spell check over the main body and the two appendices. All discovered typos have been fixed.
2021-01-03Minor corrections to the existing tools appendixRaul Infante-Sainz-136/+137
With this commit, I have corrected some minor typos of this appendix. In addition to that, I also put empty lines to separate subsections and subsubsections appropiately (5 lines and 1 line, respectively).
2021-01-03Updated copyrights of project-specific copyrightsMohammad Akhlaghi-6/+6
Having entered 2021, it was necessary to update the years of all the copyright statements.
2021-01-03Imported recent updates in Maneage, minor conflicts fixedMohammad Akhlaghi-5/+5
There were only three very small conflicts that have been fixed.
2021-01-03No links to main body in the appendices in --supplement modeMohammad Akhlaghi-9/+50
Until now, in the appendices we were simply using '\ref' to refer to different parts of the published paper. However, when built in '--supplement' mode, the main body of the paper is a separate PDF and having links to a separate PDF is not impossible, but far too complicated. However, having the links adds to the richness of the text and helps point readers to specific parts of the paper. With this commit, there is a LaTeX conditional anywhere in the appendices that we want to refer the reader to sections/figures in the main body. When building a separate PDF, the resepective section/figure is cited in a descriptive mode (like "Seciton discussing longevity of tools"). However, when the appendices go into the same PDF as the main body, the '\ref's remain.
2021-01-03Added Boud as copyright holder of supplement.texMohammad Akhlaghi-1/+2
Having added/modified text in the supplements, Boud is now a copyright holder of this file too. I also added 2021 to the copyright years of paper.tex and supplement.tex.
2021-01-03Minor copyeditingBoud Roukema-9/+9
This commit does some minor copyediting, especially of the introduction to the supplement. There's no point complaining to the reader about the word limit of the journal: s/he is not interested in that. This is not the right place for discussing journal policy. The need for summarising content and focussing on key elements of a cohesive argument is fundamental in a world of information overload. A&A/MNRAS/ApJ/PRD letters are generally much worse than normal articles in terms of reproducibility because they have to omit so many details that the reader has to read the full articles to really know what is done. But the reality is that letters get read a lot, because they're short and snappy.
2021-01-03Cleaned abstract and Section II to fit word limitMohammad Akhlaghi-1/+2
In the abstract the repeated benefits of Maneage (which are also mentioned in the criteria) were removed to fit into CiSE's online submission guidelines. In Section II (Longevity of existing tools), the paragraph that itemized the following paragrahs as a numbered list has been removed with the sentence that repeatedly states the importance of reproducibility in the sciences and some branches of the industry. With these changes our approximate automatic count has 6277 words. This is still very slightly larger than the 6250 word limit of the journal. However, this count is a definite over-estimation (including many things like page titles and page numberings from the raw PDF to text conversion). So the actual count for the journal publication should be less than this. A few other tiny corrections were made: - The year of the paper and copyright in 'README.md' was set to 2021. The copyright of the rest of the files will be set to 2021 after the next merge with Maneage soon (the years of core infrastructure copyrights has already been corrected there). - Mohammadreza's name was added in 'README.md'. - The line to import the "necessity" appendix has been commented in the version to have the full paper in one PDF (to be upladed to arXiv or Zenodo). - The supplement PDF now starts with '\appendices' so the sections have the same labels as the single-PDF version.
2021-01-03Added abstract for supplementMohammad Akhlaghi-1/+13
Until now the supplement had no introduction for a random reader to see the purpose of this "Web extra" supplement. With this commit, an abstract has been added.
2021-01-02Supplement (containing appendices) optionally built separatelyMohammad Akhlaghi-3/+143
Until now, the build strategy of the paper was to have a single output PDF that either contains (1) the full paper with appendices in the same paper (2) only the main body of the paper with no appencies. But the editor in chief of CiSE recently recommended publishing the appendices as supplements that is a separate PDF (on its webpage). So with this commit, the project can make either (1) a single PDF (containing both the main body and the appendices) that will be published on arXiv and will be the default output (this is the same as before). (2) two PDFs: one that is only the main body of the paper and another that is only the appendices. Since the appendices will be printed as a PDF in any case now, the old '--no-appendix' option has been replaced by '--supplement'. Also, the internal shell/TeX variable 'noappendix' has been renamed to 'separatesupplement'.
2021-01-02Copyright year updated in all source filesMohammad Akhlaghi-9/+9
Having entered 2021, it was necessary to update the copyright years at the top of the source files. We recommend that you do this for all your project-specific source files also.
2020-12-30Each appendix moved to a separate .tex fileMohammad Akhlaghi-0/+1059
As recommended by Lorena Barba (editor in chief of CiSE), we should prepare the appendices as a separate "Supplement" for the journal. But we also want them to be appendices within the paper when built for arXiv. As a first step, with this commit, each appendix has been put in a separate 'tex/src/appendix-*.tex' file and '\input' into the paper. We will then be able to conditionally include them in the PDF or not. Also, as recommended by Lorena, the general "necessity for reproducible research" appendix isn't included (possibly going into the webpage later).
2020-12-29Copyedit on Appendix ABoud Roukema-34/+34
This commit makes many small wording fixes, mainly to Appendix A. It also insert "quotes" around some of the titles fields in 'tex/src/references.tex', since otherwise capitalisation is lost (DNA becomes Dna; 'of Reinhart and Rogoff' becomes 'of reinhart and rogoff'; and so on). I didn't do this for all titles, because some Have All Words Capitalised, which blocks the .bib file from choosing a consistent style.
2020-12-28Minor edits, updated citation to published Menke+20 paperMohammad Akhlaghi-4/+5
Some minor edits were made to the paper to shorten it. In particular the example of IPOL was removed from the main body of the paper, and we'll just rely on the more extensive review of IPOL in the appendix. I also updated the referee report to account for the new Appendix A that is just an extended introduction. Also, I noticed that the Menke+20 paper that we replicate here has recently been published in the iScience journal. So its bibliography was updated from the bioarXiv information to the journal information. Also, the number of words (after removing abstract and captions and accounting for figures) is now only printed when the project is built with '--no-appendix'. This was done because this information is extra/annoying/unnecessary for the case where there is an appendix.
2020-12-28The old/long introduction is now an appendix on necessityMohammad Akhlaghi-6/+6
In the first/long draft of this work, we had a good introduction on the necessity of reproducibility. But we were forced to remove it because of word-count limits. Having moved a major portion of the previous work into the appendices, I thought it would be good to put that introduction as a first appendix also, focused on the necessity for reproducibile research.
2020-12-01Imported recent work in Maneage, minor conflicts fixedMohammad Akhlaghi-8/+19
Some minor conflicts that came up during the merge were fixed.
2020-12-01IMPORTANT: organizational improvements in Maneage TeX sourcesMohammad Akhlaghi-159/+173
This only concerns the TeX sources in the default branch. In case you don't use them, there should only be a clean conflict in 'paper.tex' (that is obvious and easy to fix). Conflicts may only happen in some of the 'tex/src/preamble-*.tex' files if you have actually changed them for your project. But generally any conflict that does arise by this commit with your project branch should be very clear and easy to fix and test. In short, from now on things will even be easier: any LaTeX configuration that you want to do for your project can be done in 'tex/src/preamble-project.tex', so you don't have to worry about any other LaTeX preamble file. They are either templates (like the ones for PGFPlots and BibLaTeX) or low-level things directly related to Maneage. Until now, this distinction wasn't too clear. Here is a summary of the improvements: - Two new options to './project make': with '--highlight-new' and '--highlight-notes' it is now possible to activate highlighting on the command-line. Until now, there was a LaTeX macro for this at the start of 'paper.tex' (\highlightchanges). But changing that line would change the Git commit hash, making it hard for the readers to trust that this is the same PDF. With these two new run-time options, the printed commit hash will not changed. - paper.tex: the sentences are formatted as one sentence per line (and one line per sentence). This helps in version controlling narrative and following the changes per sentence. A description of this format (and its advantages) is also included in the default text. - The internal Maneage preambles have been modified: - 'tex/src/preamble-header.tex' and 'tex/src/preamble-style.tex' have been merged into one preamble file called 'tex/src/preamble-maneage-default-style.tex'. This helps a lot in simply removing it when you use a journal style file for example. - Things like the options to highlight parts of the text are now put in a special 'tex/src/preamble-maneage.tex'. This helps highlight that these are Maneage-specific features that are independent of the style used in the paper. - There is a new 'tex/src/preamble-project.tex' that is the place you can add your project-specific customizations.
2020-11-30New tex/src/preamble-maneage.tex for Maneage-only TeX customizationMohammad Akhlaghi-22/+53
Until now, the Maneage-only features of LaTeX where mixed with 'tex/src/preamble-project.tex' (which is reserved for project-specific things). But we want to move the highlighting features (that have started here) into the core Maneage branch, so its best for these Maneage-specific features to be in a Maneage-specific preamble file. With this commit, a hew 'tex/src/preamble-maneage.tex' has been created for this purpose and the highlighting modes have been put in there. In the process, I noticed that 'tex/src/preamble-project.tex' doesn't have a copyright! This has been corrected.
2020-11-27Clickable links in appendicesBoud Roukema-6/+7
This commit makes the numbered links to references such as [13] [14] [15] in the appendices clickable in the pdf. The solution was to call the "\newcites" command from the "multilibs" package *after* loading "hyperref". First do "rm -fv .build/tex/build/*.bbl .build/tex/build/*.aux" and then "./project make" a few times.
2020-11-23First draft of all the points addressed by the refereesMohammad Akhlaghi-4/+217
A new directory has been added at the top of the project's source called 'peer-review'. The raw reviews of the paper by the editors and referees has been added there as '1-review.txt'. All the main points raised by the referees have been listed in a numbered list and addressed (mostly) in '1-answers.txt'. The text of the paper now also includes all the implemented answers to the various points.
2020-11-20Highlighting changes can now be toggled at run-timeMohammad Akhlaghi-5/+9
Until now, the core Maneage 'paper.tex' had a '\highlightchanges' macro that defines two LaTeX macros: '\new' and '\tonote'. When '\highlightchanges' was defined, anything that was written within '\new' became dark green (highlighting new things that have been added). Also, anything that was written in '\tonote' was put within a '[]' and became dark red (to show that there is a note here that should be addressed later). When '\highlightchanges' wasn't defined, anything within the '\new' element would be black (like the rest of the text), and the things in '\tonote' would not be shown at all. Commenting the '\newcommand{\highlightchanges}{}' line within 'paper.tex' (to toggle the modes above) would create a different Git hash and has to be committed. But this different commit hash could create a false sense in the reader that other things have also been changed and the only way they could confirm was to actually go and look into the project history (which they will not usually have time to do, and thus won't be able to trust the two modes of the text). Also, the added highlights and the note highlights were bundeled together into one macro, so you couldn't only have one of them. With this commit, the choice of highlighting either one of the two is now done as two new run-time options to the './project' script (which are passed to the Makefiles, and written into the 'project.tex' file which is loaded into 'paper.tex'). In this way, we can generate two PDFs with the same Git commit (project's state): one with the selected highlights and another one without it. This issue actually came up for me while implementing the changes here: we need to submit one PDF to the journal/referees with highlights on the added features. But we also need to submit another PDF to arXiv and Zenodo without any highlights. If the PDFs have different commit hashes, the referees may associate it with other changes in any part of the work. For example https://oadoi.org/10.22541/au.159724632.29528907 that mentions "Another version of the manuscript was published on arXiv: 2006.03018", while the only difference was a few words in the abstract after the journal complained on the abstract word-count of our first submission (where the commit hashes matched with arXiv/Zenodo).
2020-11-15First edits on the newly added appendices in new formMohammad Akhlaghi-12/+11
With the optional appendices added recently to the paper, it was important to go through them and make them more fitting into the paper.
2020-11-04Appendix of long paper added, optionally we can disable itMohammad Akhlaghi-306/+24
Given the referee reports, after discussing with the editors of CiSE, we decided that it is important to include the complete appendix we had before that included a thorough review of existing tools and methods. However, the appendix will not be published in the paper (due to the strict word-count limit). It will only be used in the arXiv/Zenodo versions of the paper. This actually created a technical problem: we want the commit hash of the project source to remain the same when the paper is built with an appendix or without it. To fix this problem the choice of including an appendix has gone into the 'project' script as a run-time option called '--no-appendix'. So by default (when someone just runs './project make'), the PDF will have an appendix, but when we want to submit to the journal, or when the appendix isn't needed for a certain reason, we can use this new option. The appendix also has its own separate bibliography. Some other corrections made in this commit: 1. Some new references were added that had an '_' in their source, they were corrected in 'references.tex'. 2. I noticed that 'preamble-style.tex' is not actually used in this paper, so it has been deleted.
2020-09-24Gnuastro's analysis configuration files removedMohammad Akhlaghi-2/+2
Until now, the core Maneage branch included some configuration files for Gnuastro's programs. This was actually a remnant of the distant past when Maneage didn't actually build its own software and we had to rely on the host's software versions. This file contained the configuration files specific to Gnuastro for this project and also had a feature to avoid checking the host's own configuration files. However, we now build all our software ourselves with fixed configuration files (for the version that is being installed and its version is stored). So those extra configuration files were just extra and caused confusion and problems in some scenarios. With this commit, those extra files are now removed. Also, two small issues are also addressed in parallel with this commit: - When running './project make clean', the 'hardware-parameters.tex' macro file (which is created by './project configure' is not deleted. - The project title is now written into the default output's PDF's properties (through 'hypersetup' in 'tex/src/preamble-header.tex') through the LaTeX macro. All these issues were found and fixed with the help of Samane Raji.
2020-08-20Data lineage and replicated plot in one rowMohammad Akhlaghi-31/+261
Until now, the replicated plot had the width of the full page and the data lineage graph was under it. Together they were covering more than half of the height of the page! But the plot showing the number of papers with tools really doesn't have too much detail, and all the space was being wasted. With this commit, the plot is now much much thinner and the data lineage graph has been fitted to the right of it.
2020-08-20Imported recent updates in Maneage, minor conflicts fixedMohammad Akhlaghi-0/+12
Some very minor conflicts came up and were easily corrected. They were mostly in parts that are also shared with the demonstration in the core Maneage branch.
2020-07-04Better names and comments in INPUTS.confMohammad Akhlaghi-1/+1
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this very alien to anyone that is not familiar with the history of the Hubble Space Telescope (the camera is no longer used! Its just used here since its one of the standard FITS files from the FITS standard webpage). With this commit the variable names have been modified to be more readable and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf' (describing the purpose of each variable) were edited and made more clear.
2020-07-04Citing Maneage paper in acknowledgmentsMohammad Akhlaghi-1/+1
In the previous commit, the modified abstract of the acknowledgments only included the URL of Maneage, but its more formal to cite the Maneage paper, the URL is already present in the paper.
2020-06-18Better step-by-step implementation of the data-lineage figureMohammad Akhlaghi-104/+87
Until now, the data-lineage figure's step-by-step feature (using the macros defined at the top) didn't correspond to the new format! It was still based on the purely-hypothetical format, while the boxes and their contents had changed. With this commit, they macros and corresponding parts that they create have been updated to represent the step-by-step data lineage of this paper. Also, in the "tools-per-year" plot, the green line was brought ontop of the histogram to be more clear (especially when transparency isn't implemented properly in the conversion).
2020-06-17Better color for project branch in branching figureMohammad Akhlaghi-1/+1
Until now the color for the branching figure'e "project" branch was too close to the Derved project branch. With this commit, I am using a slightly darker shade of brown that is sufficiently differnet from the core Maneage branch and the derived project branch.
2020-06-16Acknowledged contributions of Marios KarouzosMohammad Akhlaghi-28/+29
Marios had read the first draft of the paper (Commit f990bba) and provided valuable feedback (shown below) that ultimately helped in the current version. But because of all the work that was necessary in those days, I forgot to actually thank him in the acknowledgment, while I had implemented most of his thoughts. Following Marios' thoughts on the Git branching figure, with this commit, I am also adding a few sentences at the end of the caption with a very rough summary of Git. I also changed the branch commit-colors to shades of brown (incrementally becoming lighter as higher-level branches are shown) to avoid the confusion with the blue and green signs within the schematic papers shown in the figure. Marios' comments (April 28th, 2020, on Commit f990bba) ------------------------------------------------------ I think the structure of the paper is more or less fine. There are two places that I thought could be improved: 1) Section 3 (Principles) was somewhat confusing to me in the way that it was structured. I think the main source of confusion is the mixing of what Maeage is about and what other programs have done. I would suggest to separate the two. I would have short intro for the section, similar to what you have now. However, I would suggest to highlight the underlying goals motivating the principles that follow: reproducibility, open science, something else? Then I would go into the details of the seven principles. Some of the principles are less clear to me than others. For example, why is simplicity a guiding principle? Then some other principles appear to be related, for example modularity, minimal complexity and scalability to my eyes are not necessarily separate. Finally, I would separate the comparison with other software and either dedicate a section to that somewhere toward the end of the paper (perhaps a subsection for section 5) or at least condense it and put it as a closing paragraph for Section 3. As it is now I think it draws focus from Maneage and also includes some repetitions. 2) Section 4 (Maneage) was at times confusing because it is written, I think in part as a demonstration of Maneage (i.e., including examples that showed how Maneage was used to write this or other papers) and a manual/description of the software. I wonder whether these two aspects can be more cleanly separated. Perhaps it would be possible to first have a section 4 where each of the modules/units of Maneage are listed and explained and then have the following section discuss a working example of Maneage using this or another paper. 3) I found Figure 7 [the git branching figure] and its explanation not very intuitive. This probably has to do with my zero knowledge of github and how versioning there works, but perhaps the description can be a bit more "user friendly" even for those who are not familiar with the tool. 4) I find Section 6 to be rather inconsequential. It does not add anything and it more or less is just a summary of what was discussed. I would personally remove it and include a very short summary of the ideals/principles/goals of Maneage at the beginning of Section 5, before the discussion.
2020-06-14Better comments for the top macros of paper.texMohammad Akhlaghi-20/+0
The default 'paper.tex' starts by defining some macros and comments describing them. Until now, the text was not too clear and could be confusing for someone that is not at all familiar with Maneage. With this commit, the comments have been edited to be more clear for a first-time reader. For example they all start with FULL CAPS summaries. Two other small things were corrected in 'tex/src/preamble-necessary.tex': - Until now 'project.tex' was included in this preamble. However, because of its importance in Maneage, and prominent place in the demonstration plot of the paper introducing Maneage, it is now included directly in 'paper.tex'. This also allows users to safely ignore/delete this preamble file if their LaTeX style is different. - I noticed that some macros for some astronomical software names from the very first commits in Maneage were still present here! They are no longer used, so they have been removed.
2020-06-13Custom-built EPS icons in branching figureMarjan Akbari-432/+2270
Until now, we were using three EPS (created from SVG) that were downloaded from https://www.flaticon.com. Therefore it was necessary to acknowledge the creators and put a link to the webpage. This consumed space in the caption and decreased the originality of the plot. Another problem was that the "collaboration" icon (with three people in it) had arrows, and some of those arrows pointed downwards, make ambiguity in relation to the top-ward arrows under the commits. With this commit, three alternative icons are added that I made from scratch, using Inkscape. The collaboration icon now is two figures and two speech-bubbles, without any arrows.
2020-06-10Updated text of default paper.tex, putting more recent examplesMohammad Akhlaghi-22/+78
The text of the default paper hadn't been changed for a very long time! In this time, three papers using Maneage have been published (which can be very good as an example), Maneage also now has a webpage! With these commit these examples and the webpage have been added and generally it was also polished a little to hopefully be more useful.
2020-06-07Added SoftwareHeritage link, minor typo corrections and clarificationsMohammad Akhlaghi-0/+0
The git history of the project is now archived on SoftwareHeritage and a link to it as was added in the "Reproducible supplement" tag just under the abstract. Also, some corrections were also made in the text. In particular, the part explaining the separation of software and data reproducibility was slightly clarified to be more clear
2020-06-06IMPORTANT: Added publication checklist, improved relevant infrastructureMohammad Akhlaghi-10/+21
Possible semantic conflicts (that may not show up as Git conflicts but may cause a crash in your project after the merge): 1) The project title (and other basic metadata) should be set in 'reproduce/analysis/conf/metadata.conf'. Please include this file in your merge (if it is ignored because of '.gitattributes'!). 2) Consider importing the changes in 'initialize.mk' and 'verify.mk' (if you have added all analysis Makefiles to the '.gitattributes' file (thus not merging any change in them with your branch). For example with this command: git diff master...maneage -- reproduce/analysis/make/initialize.mk 3) The old 'verify-txt-no-comments-leading-space' function has been replaced by 'verify-txt-no-comments-no-space'. The new function will also remove all white-space characters between the columns (not just white space characters at the start of the line). Thus the resulting check won't involve spacing between columns. A common set of steps are always necessary to prepare a project for publication. Until now, we would simply look at previous submissions and try to follow them, but that was prone to errors and could cause confusion. The internal infrastructure also didn't have some useful features to make good publication possible. Now that the submission of a paper fully devoted to the founding criteria of Maneage is complete (arXiv:2006.03018), it was time to formalize the necessary steps for easier submission of a project using Maneage and implement some low-level features that can make things easier. With this commit a first draft of the publication checklist has been added to 'README-hacking.md', it was tested in the submission of arXiv:2006.03018 and zenodo.3872248. To help guide users on implementing the good practices for output datasets, the outputs of the default project shown in the paper now use the new features). After reading the checklist, please inspect these. Some other relevant changes in this commit: - The publication involves a copy of the necessary software tarballs. Hence a new target ('dist-software') was also added to package all the project's software tarballs in one tarball for easy distribution. - A new 'dist-lzip' target has been defined for those who want to distribute an Lzip-compressed tarball. - The '\includetikz' LaTeX macro now has a second argument to allow configuring the '\includegraphics' call when the plot should not be built, but just imported.
2020-06-04Scale element in includegraphics for roughly similar-sized figuresMohammad Akhlaghi-6/+8
Until now, when the figures were built directly from EPS ('\newcommand{\makepdf}{}' was commented), they would take the full line-width becoming a little too large! I noticed this after letting arXiv build the PDF. With this commit, the 'includetikz' tool takes a second argument to be a parameter given to 'includegraphics' (which is scale in this case).
2020-06-04Verification activated, README added, Proper metadata in plot dataMohammad Akhlaghi-3/+3
All the steps following the to-be-added (in 'README-hacking.md') publication checklist prior to the final check from new clone have been added: - 'README.md' file has been set. - "Reproducible supplement" was added just above the keywords, pointing to Zenodo. - A link to the to-be-uploaded data underlying the plot was added in the caption of the tools-per-year plot. - A new meta-data configuration file was added to store basic project metadata to be used throughout the project. This will later be taken into Maneage. For examle the project title is now stored here and written into the paper's LaTeX source and output datasets automatically. - Verification was activated and plot's data and LaTeX macro files are now automatically verified. - A complete metadata was added for the data underlying the plot. - A generic function was added in 'initialize.mk' that will automatically write project info and copyright in all plain-text outputs.
2020-06-03Imported recent updated in Maneage, minor conflict fixedMohammad Akhlaghi-8/+12
The minor conflict was with 'reproduce/software/make/high-level.mk', and in particular because we implemented the fix to Maneage's Task #15664 in this project first. After it was moved to the main Maneage branch some minor stylistic corrections were done to it, thus causing the conflict. To resolve the conflict, I simply imported the full Maneage version of the file with this command: git checkout maneage -- reproduce/software/make/high-level.mk The other conflicts were due to the deleted files (that were resolved as described in 'README-hacking.md') and the LaTeX files that I had told '.gitattributes' to ignore from the Maneage branch.
2020-05-29Reproducible research based on open-access papersBoud Roukema-2/+2491
Publishing a paper on reproducible research without making it easy for readers to read the references would defeat the point. Of course we have to make some compromises with some journals' reluctance to shift towards the free world, but to satisfy scientific ethics, we should at least provide clickable URLs to the references, preferably to the ArXiv version if available [1], and also to the DOI, again, preferably to an open-access version of the URL if available. I was not able to fully get this done in the .bst file, so there's an sed/tr hack done to the .bbl file in `reproduce/analysis/make/paper.mk` to tidy up commas and spaces. This commit also reverts some of the hacks in the Akhlaghi IAU Symposium `tex/src/references.tex` entry, to match the improved .bst file, `tex/src/IEEEtran_openaccess.bst`, provided here with a different name to the original, in order to satisfy the LaTeX licence. [1] https://cosmo.torun.pl/blog/arXiv_refs
2020-05-29Added top-make.mk as a listing for demonstration, minor editsMohammad Akhlaghi-0/+2
To help show the simplicity of 'top-make.mk', it was included as a listing. I also went over some of Boud's corrections and made small edits. In particular: - The '\label' and '\ref' to a section were removed. I done this after inspecting some of their recent papers and noticing that they generally have a simple flow, without such redirections. - In the part about the RDA adoption grant, I moved the "from the researcher perspective" to the end. Because Austin+2017 is mainly focused on data-center management, not the researcher's. They do touch upon researcher solutions that can help data-base managers, but not directly the researchers. In effect with this grant, they acknowledged that our researcher-focused solution confirms with their criteria for data-base management.
2020-05-23Corrected name of produced demonstration tableMohammad Akhlaghi-2/+2
In order to correspond to the updated datalineage plot, the name of the plotted columns was changed to 'columns.txt', but I had forgot to update it in the LaTeX source and since the old file still remained I hadn't noticed. This was found by Boud and corrected.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-52/+79
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf