Until now, the Zenodo identifier for the project was for the second arXiv release (after the first referee reports). However, since the paper has been published, it hasn't been updated on arXiv and its necessary to make a "final" arXiv publication. With this commit, a new Zenodo DOI has been reserved for the third release and is now being used.
Until now, Maneage had undergone some updates. With this commit, those updates have been imported and the conflicts that resulted were fixed. They were all cosmetic and had no effect on the analysis. The most significant one was about the change in the format of 'INPUTS.conf'. In the process, I also noticed that the IEEEtran LaTeX package is now called 'ieeetran' (the 'tlmgr' of TeXLive 2022 was failing).
Until now, the './project make clean' command would only clean (remove) the PDF file from the top source directory. However, if a user would run LaTeX outside of Maneage, many extra latex output such as *.aux, *.log, *.synctex and etc would be produced in the top source directory. These files can interfere with './project make'. With this commit, when './project make clean' is run, any possibly existing LaTeX temporary files will also be deleted from the top source directory. This problem was first reported by Matin Torkian.
Until now, one had to follow the instructions from [1] to prepare a
standard software tarball before merging with the low-level
tarballs-software repository [2]. The script only worked for '.tar.gz'
suffix and was only available as a comment on Savannah (in [1]).
With this commit, the script has been imported into Maneage as
'reproduce/software/shell/tarball-prepare.sh' to simplify future software
updates. It work with all supported '.tar.*' suffixes (of the upstream
tarball repository) and will convert the tarballs to Maneage's standard
format. Also, this script has a minimal argument parser and can skip the
tarballs that are already unpacked, allowing faster tests.
This script was used to update the versions of:
Coreutiles 9.0 --> 9.1
Git 2.34 --> 2.36
Emacs 27.2 --> 28.1
The main motive behind this update was Git which announced a vulnerability
issue [3] and suggested an update to the latest version as soon as
possible. More detail is described in this github blog [4], but in summary,
it was a security issue on multi-user systems that has been found and fixed
by Git developers. Since Maneage is often installed on such shared systems,
it was important to make this update. GNU Coreutils and GNU Emacs were also
updated because they are also commonly used.
The following improvements have also done with this commit:
- .gitignore: ignore emacs auto-save files (that end with a '#')
- README-hacking.md: In the checklist for updating the Maneage branch, the
no-longer-necessary '--decorate' option of Git was removed from the
command to check the general branch history.
[1] https://savannah.nongnu.org/task/?15699
[2] https://git.maneage.org/tarballs-software.git/
[3] https://lore.kernel.org/git/xmqqv8veb5i6.fsf@gitster.g/
[4] https://github.blog/2022-04-12-git-security-vulnerability-announced/
Until now, the bibliography was only re-built when 'tex/src/references.tex' was modified. This is useful in many regular cases because building the bibliography can slow down the build and it is in-efficient to built it in every edit of the text of the paper. However, it can be inconvenient when a change in the paper's bibliography is necessary, without actually editing 'references.tex' (for example when you are removing a citation from the text). This happens because Make is only sensitive to file modification time. In this case, Make does not see the need to create a new 'bib' file because the 'tex/src/reference' is not changed, and only the 'paper.tex' is changed. Make is totally 'blind' to the new 'citation' defined in 'paper.tex'. As a workaround, until now users were forced to manually change the 'tex/src/references.tex' file modification date: either by altering the content, or using the 'touch' command. With this commit, the '--refresh-bib' is added to './project' arguments to address this issue. It will just 'touch' the 'tex/src/references.tex' file before calling Make. In effect, this will 'force' Make to create the bibliography file, even if 'tex/src/references.tex' hasn't been updated.
SUMMARY: it is necessary to update your 'INPUTS.conf' and 'download.mk'.
Until now, adding an input file involved several steps that needed manual
(and inconvenient!) intervention: for every file, you needed to define four
variables in 'INPUTS.conf', and in 'reproduce/analysis/make/download.mk'
you had to use a (complex for large number of files) shell 'if/elif/else'
condition to link the names of the input files to those variables. Besides
inconvenience, this could cause bugs (typos!). Furthermore, a basic MD5
checksum was used for verifying the files.
With this commit, a new structure has been defined for 'INPUTS.conf' that
(thanks to some pretty useful GNU Make features), removes the need for
users to manually edit 'reproduce/analysis/make/download.mk', and reduces
the number of variables necessary for each file to three (from
four). Furthermore, we now use the SHA256 checksum for input data
validation.
Regarding the trick used in 'INPUTS.conf' (form the newly added description
in 'download.mk'): In GNU Make, '.VARIABLES' "... expands to a list of the
names of all global variables defined so far" (from the "Other Special
Variables" section of the GNU Make manual). Assuming that the pattern
'INPUT-%-sha256' is only used for input files, we find all the variables
that contain the input file names (the '%' is the filename). Finally, using
the pattern-substitution function ('patsubst'), we remove the fixed string
at the start and end of the variable name.
Steps you need to take:
- INPUTS.conf: translate your old format to the new format (after
carefully reading the description in the comments at the start of the
file). After applying the new standards, you don't need to use the
variables of 'INPUTS.conf' directly in your Makefiles! For example if
one of your input datasets is called 'abc.fits', the checksum variable
will be 'INPUT-abc.fits-sha256' and in your high-level Makefiles, you
can simply set '$(indir)/abc.fits' as a prerequisite (like you probably
did already).
- reproduce/analysis/make/download.mk: for the definition and rule of
'inputdatasets', simply use the Maneage branch, and remove anything you
had added in your project.
In the process, I also noticed that 'README-hacking.md' still referred to
'master' as the main project branch, while we have used 'main' in the paper
(and is the common convention with Git).
Until now, the definition of the prepare directory was wrong (not in the 'analysis' directory of the build directory). I noticed this after an update of the Maneage branch of one project that requires the prepare step. With this commit, this problem has been fixed.
Until now, the 'double dash' (i.e. \texttt{--}) in the default 'paper.tex'
would only print one (longer) dash in the output pdf.
With this commit, the double dashes are replaced with '-{}-' in the LaTeX
source as a workaround suggested by Stefan Kottwitz in [1].
[1] https://latex.org/forum/viewtopic.php?f=44&t=4670&start=0
This commit primarily affects the configuration step of Maneage'd projects,
and in particular, updated versions of the many of the software (see
P.S.). So it shouldn't affect your high-level analysis other than the
version bumps of the software you use (and the software's possibly
improve/changed behavior).
The following software (and thus their dependencies) couldn't be updated as
described below:
- Cryptography: isn't building because it depends on a new
setuptools-rust package that has problems
(https://savannah.nongnu.org/bugs/index.php?61731), so it has been
commented in 'versions.conf'.
- SecretStorage: because it depends on Cryptography.
- Keyring: because it depends on SecretStorage.
- Astroquery: because it depends on Keyring.
This is a "squashed" commit after rebasing a development branch of 60
commits corresponding to a roughly two-month time interval. The following
people contributed to this branch.
- Boudewijn Roukema added all the R software infrastructure and the R
packages, as well as greatly helping in fixing many bugs during the
update.
- Raul Infante-Sainz helped in testing and debugging the build.
- Pedram Ashofteh Ardakani found and fixed a bug.
- Zahra Sharbaf helped in testing and found several bugs.
Below a description of the most noteworthy points is given.
- Software tarballs: all updated software now have a unified format
tarball (ustar; if not possible, pax) and unified compression (Lzip) in
Maneage's software repository in Zenodo
(https://doi.org/10.5281/zenodo.3883409). For more on this See
https://savannah.nongnu.org/task/?15699 . This won't affect any extra
software you would like to add; you can use any format recognized by
GNU Tar, and all common compression algorithms. This new requirement is
only for software that get merged to the core Maneage branch.
- Metastore (and thus libbsd and libmd) moved to highlevel: Metastore
(and the packages it depends on) is a high-level product that is only
relevant during the project development (like Emacs!): when the user
wants the file meta data (like dates) to be unchanged after checking
out branches. So it should be considered a high-level software, not
basic. Metastore also usually causes many more headaches and error
messages, so personally, I have stopped using it! Instead I simply
merge my branches in a separate clone, then pull the merge commit: in
this way, the files of my project aren't re-written during the checkout
phase and therefore their dates are untouched (which can conflict with
Make's dates on configuration files).
- The un-official cloned version of Flex (2.6.4-91 until this commit) was
causing problems in the building of Netpbm, so with this commit, it has
been moved back to version 2.6.4.
- Netpbm's official page had version 10.73.38 as the latest stable
tarball that was just released in late 2021. But I couldn't find our
previously-used version 10.86.99 anywhere (to see when it was released
and why we used it! Its at last more than one year old!). So the
official stable version is being used now.
- Improved instructions in 'README.md' for building software environment
in a Docker container (while having project source and output data
products on the local system; including the usage of the host's
'/dev/shm' to speed up temporary operations).
- Until now, the convention in Maneage was to put eight SPACE characters
before the comment lines within recipes. This was done because by
default GNU Emacs (also many other editors) show a TAB as eight
characters. However, in other text editors, online browsers, or even
the Git diff, a TAB can correspond to a different number of
characters. In such cases, the Maneage recipes wouldn't look too
interesting (the comments and the recipe commands would show a
different indentation!).
With this commit, all the comment lines in the Makefiles within the
core Maneage branch have a hash ('#') as their first character and a
TAB as the second. This allows the comment lines in recipes to have the
same indentation as code; making the code much more easier to read in a
general scenario including a 'git diff' (editor agnostic!).
P.S. List of updated software with their old and new versions
- Software with no version update are not mentioned.
- The old version of newly added software are shown with '--'.
Name (Basic) Old version New version
------------ ----------- -----------
Bzip2 1.0.6 1.0.8
CURL 7.71.1 7.79.1
Dash 0.5.10.2 0.5.11.5
File 5.39 5.41
Flock 0.2.3 0.4.0
GNU Bash 5.0.18 5.1.8
GNU Binutils 2.35 2.37
GNU Coreutils 8.32 9.0
GNU GCC 10.2.0 11.2.0
GNU M4 1.4.18 1.4.19
GNU Readline 8.0 8.1.1
GNU Tar 1.32 1.34
GNU Texinfo 6.7 6.8
GNU diffutils 3.7 3.8
GNU findutils 4.7.0 4.8.0
GNU gmp 6.2.0 6.2.1
GNU grep 3.4 3.7
GNU gzip 1.10 1.11
GNU libunistring 0.9.10 1.0
GNU mpc 1.1.0 1.2.1
GNU mpfr 4.0.2 4.1.0
GNU nano 5.2 6.0
GNU ncurses 6.2 6.3
GNU wget 1.20.3 1.21.2
Git 2.28.0 2.34.0
Less 563 590
Libxml2 2.9.9 2.9.12
Lzip 1.22-rc2 1.22
OpenSLL 1.1.1a 3.0.0
Patchelf 0.10 0.13
Perl 5.32.0 5.34.0
Podlators -- 4.14
Name (Highlevel) Old version New version
---------------- ----------- -----------
Apachelog4cxx 0.10.0-603 0.12.1
Astrometry.net 0.80 0.85
Boost 1.73.0 1.77.0
CFITSIO 3.48 4.0.0
Cmake 3.18.1 3.21.4
Eigen 3.3.7 3.4.0
Expat 2.2.9 2.4.1
FFTW 3.3.8 3.3.10
Flex 2.6.4-91 2.6.4
Fontconfig 2.13.1 2.13.94
Freetype 2.10.2 2.11.0
GNU Astronomy Utilities 0.12 0.16.1-e0f1
GNU Autoconf 2.69.200-babc 2.71
GNU Automake 1.16.2 1.16.5
GNU Bison 3.7 3.8.2
GNU Emacs 27.1 27.2
GNU GDB 9.2 11.1
GNU GSL 2.6 2.7
GNU Help2man 1.47.11 1.48.5
Ghostscript 9.52 9.55.0
ICU -- 70.1
ImageMagick 7.0.8-67 7.1.0-13
Libbsd 0.10.0 0.11.3
Libffi 3.2.1 3.4.2
Libgit2 1.0.1 1.3.0
Libidn 1.36 1.38
Libjpeg 9b 9d
Libmd -- 1.0.4
Libtiff 4.0.10 4.3.0
Libx11 1.6.9 1.7.2
Libxt 1.2.0 1.2.1
Netpbm 10.86.99 10.73.38
OpenBLAS 0.3.10 0.3.18
OpenMPI 4.0.4 4.1.1
Pixman 0.38.0 0.40.0
Python 3.8.5 3.10.0
R 4.0.2 4.1.2
SWIG 3.0.12 4.0.2
Util-linux 2.35 2.37.2
Util-macros 1.19.2 1.19.3
Valgrind 3.15.0 3.18.1
WCSLIB 7.3 7.7
Xcb-proto 1.14 1.14.1
Xorgproto 2020.1 2021.5
Name (Python) Old version New version
------------- ----------- -----------
Astropy 4.0 5.0
Beautifulsoup4 4.7.1 4.10.0
Beniget -- 0.4.1
Cffi 1.12.2 1.15.0
Cryptography 2.6.1 36.0.1
Cycler 0.10.0 0.11.0+}
Cython 0.29.21 0.29.24
Esutil 0.6.4 0.6.9
Extension-helpers -- 0.1
Galsim 2.2.1 2.3.3
Gast -- 0.5.3
Jinja2 -- 3.0.3
MPI4py 3.0.3 3.1.3
Markupsafe -- 2.0.1
Numpy 1.19.1 1.21.3
Packaging -- 21.3
Pillow -- 8.4.0
Ply -- 3.11
Pyerfa -- 2.0.0.1
Pyparsing 2.3.1 3.0.4
Pythran -- 0.11.0
Scipy 1.5.2 1.7.3
Setuptools 41.6.0 58.3.0
Six 1.12.0 1.16.0
Uncertainties 3.1.2 3.1.6
Wheel -- 0.37.0
Name (R) Old version New version
-------- ----------- -----------
Cli -- 2.5.0
Colorspace -- 2.0-1
Cowplot -- 1.1.1
Crayon -- 1.4.1
Digest -- 0.6.27
Ellipsis -- 0.3.2
Fansi -- 0.5.0
Farver -- 2.1.0
Ggplot2 -- 3.3.4
Glue -- 1.4.2
GridExtra -- 2.3
Gtable -- 0.3.0
Isoband -- 0.2.4
Labeling -- 0.4.2
Lifecycle -- 1.0.0
Magrittr -- 2.0.1
MASS -- 7.3-54
Mgcv -- 1.8-36
Munsell -- 0.5.0
Pillar -- 1.6.1
R-Pkgconfig -- 2.0.3
R6 -- 2.5.0
RColorBrewer -- 1.1-2
Rlang -- 0.4.11
Scales -- 1.1.1
Tibble -- 3.1.2
Utf8 -- 1.2.1
Vctrs -- 0.3.8
ViridisLite -- 0.4.0
Withr -- 2.4.2
As part of Commit 87b510bc, an Emacs spell check was run on the paper. However, during the process, the Jupyter add-on name 'nbextensions' was mistakenly "corrected" to "extension's"! With this commit, it has been corrected to its correct name. The commit message was edited to add more clarity/context, also Florian's name has been added in the acknowledgments by Mohammad.