Reproducible source for XXXXXXXXXXXXXXXXX ------------------------------------------------------------------------- Copyright (C) 2018-2020 Mohammad Akhlaghi \ See the end of the file for license conditions. This is the reproducible project source for the paper titled "**XXX XXXXX XXXXXX**", by XXXXX XXXXXX, YYYYYY YYYYY and ZZZZZZ ZZZZZ that is published in XXXXX XXXXX. To reproduce the results and final paper, the only dependency is a minimal Unix-based building environment including a C and C++ compiler (already available on your system if you have ever built and installed a software from source) and a downloader (Wget or cURL). Note that **Git is not mandatory**: if you don't have Git to run the first command below, go to the URL given in the command on your browser, and download the project's source (there is a button to download a compressed tarball of the project). If you have received this source from arXiv or Zenodo (without any `.git` directory inside), please see the "Building project tarball" section below. ```shell $ git clone XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX $ cd XXXXXXXXXXXXXXXXXX $ ./project configure $ ./project make ``` This paper is made reproducible using Maneage (MANaging data linEAGE). To learn more about its purpose, principles and technicalities, please see `README-hacking.md`, or the Maneage webpage at https://maneage.org. ### Building the project This project was designed to have as few dependencies as possible without requiring root/administrator permissions. 1. Necessary dependencies: 1.1: Minimal software building tools like C compiler, Make, and other tools found on any Unix-like operating system (GNU/Linux, BSD, Mac OS, and others). All necessary dependencies will be built from source (for use only within this project) by the `./project configure` script (next step). 1.2: (OPTIONAL) Tarball of dependencies. If they are already present (in a directory given at configuration time), they will be used. Otherwise, a downloader (`wget` or `curl`) will be necessary to download any necessary tarball. The necessary tarballs are also collected in the archived project on [https://doi.org/10.5281/zenodo.XXXXXXX](XXXXXXX). Just unpack that tarball and you should see all the tarballs of this project's software. When `./project configure` asks for the "software tarball directory", give the address of the unpacked directory that has all the tarballs. [[TO AUTHORS: UPLOAD THE SOFTWARE TARBALLS WITH YOUR DATA AND PROJECT SOURCE TO ZENODO OR OTHER SIMILAR SERVICES. THEN ADD THE DOI/LINK HERE. DON'T FORGET THAT THE SOFTWARE ARE A CRITICAL PART OF YOUR WORK'S REPRODUCIBILITY.]] 2. Configure the environment (top-level directories in particular) and build all the necessary software for use in the next step. It is recommended to set directories outside the current directory. Please read the description of each necessary input clearly and set the best value. Note that the configure script also downloads, builds and locally installs (only for this project, no root privileges necessary) many programs (project dependencies). So it may take a while to complete. ```shell $ ./project configure ``` 3. Run the following command to reproduce all the analysis and build the final `paper.pdf` on `8` threads. If your CPU has a different number of threads, change the number (you can see the number of threads available to your operating system by running `./.local/bin/nproc`) ```shell $ ./project make -j8 ``` ### Building project tarball (possibly from arXiv) If the paper is also published on arXiv, it is highly likely that the authors also uploaded/published the full project there along with the LaTeX sources. If you have downloaded (or plan to download) this source from arXiv, some minor extra steps are necessary as listed below. This is because this tarball is mainly tailored to automatic creation of the final PDF without using Maneage (only calling LaTeX, not using the './project' command)! You can directly run 'latex' on this directory and the paper will be built with no analysis (all necessary built products are already included in the tarball). One important feature of the tarball is that it has an extra `Makefile` to allow easy building of the PDF paper without worring about the exact LaTeX and bibliography software commands. #### Only building PDF using tarball (no analysis) 1. If you got the tarball from arXiv and the arXiv code for the paper is 1234.56789, then the downloaded source will be called `1234.56789` (no suffix). However, it is actually a `.tar.gz` file. So take these steps to unpack it to see its contents. ```shell $ arxiv=1234.56789 $ mv $arxiv $arxiv.tar.gz $ mkdir $arxiv $ cd $arxiv $ tar xf ../$arxiv.tar.gz ``` 2. No matter how you got the tarball, if you just want to build the PDF paper, simply run the command below. Note that this won't actually install any software or do any analysis, it will just use your host operating system (assuming you already have a LaTeX installation and all the necessary LaTeX packages) to build the PDF using the already-present plots data. ```shell $ make # Build PDF in tarball without doing analysis ``` 3. If you want to re-build the figures from scratch, you need to make the following corrections to the paper's main LaTeX source (`paper.tex`): uncomment (remove the starting `%`) the line containing `\newcommand{\makepdf}{}`, see the comments above it for more. #### Building full project from tarball (custom software and analysis) As described above, the tarball is mainly geared to only building the final PDF. A few small tweaks are necessary to build the full project from scratch (download necessary software and data, build them and run the analysis and finally create the final paper). 1. If you got the tarball from arXiv, before following the standard procedure of projects described at the top of the file above (using the `./project` script), its necessary to set its executable flag because arXiv removes the executable flag from the files (for its own security). ```shell $ chmod +x project ``` 2. Make the following changes in two of the LaTeX files so LaTeX attempts to build the figures from scratch (to make the tarball; it was configured to avoid building the figures, just using the ones that came with the tarball). - `paper.tex`: uncomment (remove the starting `%`) of the line containing `\newcommand{\makepdf}{}`, see the comments above it for more. - `tex/src/preamble-pgfplots.tex`: set the `tikzsetexternalprefix` variable value to `tikz/`, so it looks like this: `\tikzsetexternalprefix{tikz/}`. 3. Remove extra files. In order to make sure arXiv can build the paper (resolve conflicts due to different versions of LaTeX packages), it is sometimes necessary to copy raw LaTeX package files in the tarball uploaded to arXiv. Later, we will implement a feature to automatically delete these extra files, but for now, the project's top directory should only have the following contents (where `reproduce` and `tex` are directories). You can safely remove any other file/directory. ```shell $ ls COPYING paper.tex project README-hacking.md README.md reproduce/ tex/ ``` ### Building in Docker containers Docker containers are a common way to build projects in an independent filesystem, and an almost independent operating system. Containers thus allow using GNU/Linux operating systems within proprietary operating systems like macOS or Windows. But without the overhead and huge file size of virtual machines. Furthermore containers allow easy movement of built projects from one system to another without rebuilding. Just note that Docker images are large binary files (+1 Gigabytes) and may not be usable in the future (for example with new Docker versions not reading old images). Containers are thus good for temporary/testing phases of a project, but shouldn't be what you archive! Hence if you want to save and move your maneaged project within a Docker image, be sure to commit all your project's source files and push them to your external Git repository (you can do these within the Docker image as explained below). This way, you can always recreate the container with future technologies too. Generally, if you are developing within a container, its good practice to recreate it from scratch every once in a while, to make sure you haven't forgot to include parts of your work in your project's version-controlled source. #### Dockerfile for a Maneaged project, and building a Docker image Below is a series of recommendations on the various components of a `Dockerfile` optimized to store the *built state of a maneaged project* as a Docker image. Each component is also accompanied with explanations. Simply copy the code blocks under each item into a plain-text file called `Dockerfile`, in the same order of the items. Don't forget to implement the suggested corrections (in particular step 4). **NOTE: Internet for TeXLive installation:** If you have the project software tarballs and input data (optional features described below) you can disable internet. In this situation, the configuration and analysis will be exactly reproduced, the final LaTeX macros will be created, and all results will be verified successfully. However, no final `paper.pdf` will be created to visualize/combine everything in one easy-to-read file. Until [task 15267](https://savannah.nongnu.org/task/?15267) is complete, we need internet to install TeXLive packages (using TeXLive's own package manager `tlmgr`) in the `./project configure` phase. This won't stop the configuration, and it will finish successfully (since all the analysis can still be reproduced). We are working on completing this task as soon as possible, but until then, if you want to disable internet *and* you want to build the final PDF, please disable internet after the configuration phase. Note that only the necessary TeXLive packages are installed (~350 MB), not the full TeXLive collection! 1. **Choose the base operating system:** The first step is to select the operating system that will be used in the docker image. Note that your choice of operating system also determines the commands of the next step to install core software. ```shell FROM debian:stable-slim ``` 2. **Maneage dependencies:** By default the "slim" versions of the operating systems don't contain a compiler, so you need to use the selected operating system's package manager to import them. You can optionally install two other programs: 1) To inspect/edit the project's source files later, install your favorite text editor. 2) If you don't have the project's software tarballs, and want the project to download them automatically, you also need a downloader. ```shell # C and C++ compiler. RUN apt-get update && apt-get install -y gcc g++ # Uncomment this to add a text editor (to modify source files later). #RUN apt-get install -y nano # Uncomment this if you don't have 'software-XXXX.tar.gz' #RUN apt-get install -y wget ``` 3. **Define a user:** Some core software packages will complain if you try to install them as the default (root) user. Generally, it is also good practice to avoid being the root user. After building the Docker image, you can always run it as root with this command: `docker run -u 0 -it XXXXXXX` (where `XXXXXXX` is the image identifier). Hence with the commands below we define a `maneager` user and activate it for the next steps. ```shell RUN useradd -ms /bin/sh maneager USER maneager WORKDIR /home/maneager ``` 4. **Copy project files into the container:** these commands make the following assumptions: * The project's source is in the `maneaged/` sub-directory and this directory is in the same directory as the `Dockerfile`. The source can either be from cloned from Git (highly recommended!) or from a tarball. Both are described above (note that arXiv's tarball needs to be corrected as mentioned above). * (OPTIONAL) By default the project's necessary software source tarballs will be downloaded when necessary during the `./project configure` phase. But if you already have the sources, its better to use them and not waste network traffic (and resulting carbon footprint!). Maneaged projects usually come with a `software-XXXX.tar.gz` file that is published on Zenodo (link above). If you have this file, put it in the same directory as your `Dockerfile` and include the relevant lines below. * (OPTIONAL) The project's input data. The `INPUT-FILES` depends on the project, please look into the project's `reproduce/analysis/config/INPUTS.conf` for the URLs and the file names of input data. Similar to the software source files mentioned above, if you don't have them, the project will attempt to download its necessary data automatically in the `./project make` phase. ```shell # Make the project's build directory and copy the project source RUN mkdir build COPY --chown=maneager:maneager ./maneaged /home/maneager/source # Optional (for software) COPY --chown=maneager:maneager ./software-XXXX.tar.gz /home/maneager/ RUN tar xf software-XXXX.tar.gz && mv software-XXXX software && rm software-XXXX.tar.gz # Optional (for data) RUN mkdir data COPY --chown=maneager:maneager ./INPUT-FILES /home/maneager/data ``` 5. **Configure the project:** With this line, the Docker image will configure the project (build all its necessary software). This will usually take about an hour on an 8-core system. You can also optionally avoid putting this step (and the next) in the `Dockerfile` and simply execute them in the Docker image in interactive mode (as explained in the sub-section below, in this case don't forget to preserve the build container after you are done). ```shell # Configure project (build full software environment). RUN cd /home/maneager/source \ && ./project configure --build-dir=/home/maneager/build \ --software-dir=/home/maneager/software \ --input-dir=/home/maneager/data ``` 6. **Project's analysis:** With this line, the Docker image will do the project's analysis and produce the final `paper.pdf`. The time it takes for this step to finish, and the storage/memory requirements highly depend on the particular project. ```shell # Run the project's analysis RUN cd /home/maneager/source && ./project make ``` 7. **Build the Docker image:** The `Dockerfile` is now ready! In the terminal, go to its directory and run the command below to build the Docker image. Just set a `NAME` for your project and note that Docker only runs as root. ```shell docker build -t NAME ./ ``` #### Interactive tests on built container If you later want to start a container with the built image and enter it in interactive mode (for example for temporary tests), please run the following command. Just replace `NAME` with the same name you specified when building the project. You can always exit the container with the `exit` command (note that all your changes will be discarded once you exit, see below if you want to preserve your changes after you exit). ```shell docker run -it NAME ``` #### Running your own project's shell for same analysis environment The default operating system only has minimal features: not having many of the tools you are accustomed to in your daily command-line operations. But your maneaged project has a very complete (for the project!) environment which is fully built and ready to use interactively with the commands below. For example the project also builds Git within itself, as well as many other high-level tools that are used in your project and aren't present in the container's operating system. ```shell # Once you are in the docker container cd source ./project shell ``` #### Preserving the state of a built container All interactive changes in a container will be deleted as soon as you exit it. THIS IS A VERY GOOD FEATURE IN GENERAL! If you want to make persistent changes, you should do it in the project's plain-text source and commit them into your project's online Git repository. As described in the Docker introduction above, we strongly recommend to **not rely on a built container for archival purposes**. But for temporary tests it is sometimes good to preserve the state of an interactive container. To do this, you need to `commit` the container (and thus save it as a Docker "image"). To do this, while the container is still running, open another terminal and run these commands: ```shell # These two commands should be done in another terminal docker container list # Get 'XXXXXXX' of your desired container from the first column above. # Give the new image a name by replacing 'NEW-IMAGE-NAME'. docker commit XXXXXXX NEW-IMAGE-NAME ``` ### Copyright information This file and `.file-metadata` (a binary file, used by Metastore to store file dates when doing Git checkouts) are part of the reproducible project mentioned above and share the same copyright notice (at the start of this file) and license notice (below). This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This project is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this project. If not, see .