| Age | Commit message (Collapse) | Author | Lines |
|---|
|
To have better control over the build, GNU Binutils, Bzip2, GNU Gzip, and
XZ Utils have also been added to the pipeline. Some other minor cleanups
and fixes were also implemented throughout the process.
|
|
Until now, when a package was to be built statically, we were adding the
`--static' option to `CFLAGS'. This was the wrong place to put it! It
should be in the linking step (thus `LDFLAGS'). Also, based on Bash's
configure script, we are now using the more generic form of `-static'
(single dash, not double dash).
On the other hand, the `--disable-shared' option isn't available in many of
the packages and it is highly redundant with the `-static' option, so it
has been removed to avoid an extra warning in such packages.
|
|
To ensure the easy unpacking and building of the programs, Lzip and Tar are
now also build during the initial setup phase.
Some minor corrections were also applied to make things cleaner and
smoother.
|
|
Until now, we used semicolons in Make's Call function definitions to build
the programs with GNU build system or CMake. Therefore, if any step of the
process failed, the rest would be ignorant to it and pass. Now, we use `&&'
to separate the different processing steps. In this way, we can be sure
that if any of them fails (during configuration, or building for example),
the pipeline will also stop and not continue to the next command (in the
same recipe).
Since the two Make Call functions were identical in the two
`dependencies-basic.mk' and `dependencies.mk', they are now in one file to
be imported in both.
This bug was found by Raul Infante Sainz.
|
|
After a test by Raúl Infante Sainz, we found out that the configure script
and the Make script for Bash and Make are making too many assumptions on
more recent versions of both. As a result, it couldn't be built.
Therefore, the `configure' script was modified to not use more recent tools
like `readlink' (to find the absolute address of a relative one). It was
also re-organized to not have to read the configuration parameters from a
text file. The parameters are directly read from the command-line and are
written into the proper file afterwards. This removes the need to opening a
text editor by the user (which also caused problems on Raúl's system).
To fix the Make version issue, the building of Bash and Make are now done
in a new Makefile (`reproduce/src/make/dependencies-basic.mk'). This file
doesn't make many of the assumptions that were made in
`dependencies.mk'. So it should hopefully work on any version of Make.
To help in debugging, for now, the Makefile of configure, are asked to work
on one thread (the `-j' option is commented in the `configure'). But after
checks, we'll fix this.
|
|
All the libraries that define their version string as a macro in their
headers are now also checked in `reproduce/src/make/initialize.mk'.
Also, the CFITSIO tarball now follows the same versioning style as the rest
of the tarballs: a script is added to convert the version string into what
is included in the tarball.
|
|
The version of all programs is now checked in
`reproduce/make/src/initialize.mk' and the pipeline won't complete if any
of the program versions change from those listed in
`reproduce/config/pipeline/dependency-versions.mk'.
Since the pipeline is systematically checking all program versions, we
don't need Gnuastro's `--onlyversion' option any more. So it (and all
references to it) have been removed.
|
|
The system's environment is now removed from the internal processing of the
pipeline, except for LaTeX.
|
|
We were mistakenly using GSL's name for the unpacked tarball.
|
|
During the configuration step several new programs that were necessary for
a more complete controlled environment are now also downloaded and built
statically.
|
|
The host web address of most of the necessary packages was blank (filled
with `WWWWWWWWWWWWWWWW' as a place holder). They now point to the correct
webpages.
|
|
To enable easy/proper reproduction of results, all the high-level
dependencies are now built within the pipeline and installed in a fixed
directory that is added to the PATH of the Makefile. This includes GNU Bash
and GNU Make, which are then used to run the pipeline.
The `./configure' script will first build Bash and Make within itself, then
it will build
All the dependencies are also built to be static. So after they are built,
changing of the system's low-level libraries (like C library) won't change
the tarballs.
Currently the C library and C compiler aren't built within the pipeline,
but we'll hopefully add them to the build process also.
With this change, we now have full control of the shell and Make that will
be used in the pipeline, so we can safely remove some of the generalities
we had before.
|
|
While trying the checklist, I noticed that I had forgot to add my name
after the copyright year and that `reproduce/src/make/paper.mk' still had
my own name on it, the copyright notice also said `script' instead of
`Makefile' which is now corrected.
|
|
To be more generic (and avoid listing file names in `README.md'), a command
is now used to find the files where the name has to be added to the
copyright notice. Also, I noticed that `reproduce/src/make/paper.mk' lacked
a placeholder name/email, so one was added.
|
|
Different implementations of AWK may use different random number
generators, so even setting the seed will not ensure a reproducible
result. Because of this, the random plot may be different when the
pipeline runs on different systems and this can confuse early users
(its contrary to the exact reproducibility that is the whole purpose
of this pipeline).
The plot is just a simple X^2 plot, showing the squared value of the X
axis on the Y axis. It is very simple, but atleast it will be
identical on all systems. Also, there may be too many complicated
things in the pipeline already for an early user, and its just a
demonstration, so the easier/simpler, the better.
|
|
While we had set the default Makefile SHELL to be bash, we weren't
actually checking if `bash' is available on the system. With this
commit, it is also checked at configure time.
|
|
The comments needed to be corrected to fit and explain the new logic (LaTeX
being run within another directory).
|
|
Making plots and including references are integral parts of a scientific
paper. Therefore to demonstrate how cleanly they can be used within the
pipeline, they are now used to produce the final PDF.
To use PGFPlots a random dataset is made (using AWK's random function) and
is plotted using PGFPlots. The minimum and maximum values of the dataset
are also included in the text to further show how such calculations can go
into the macros and text.
For the references, the NoiseChisel paper was added as a reference to cite
when using this pipeline along with the MUSE UDF paper I, which uses this
pipeline for two sections. Following this discussion, citation is also
discussed in `README.md` and the NoiseChisel paper is also added as a
published work with a reproduction pipeline.
|
|
Until now, the copyright statement was left empty for the users of the
pipeline to fill. However, the files have already been created and have an
author (or contributing authors) before the user starts using the
pipeline. So the original authors of the files are added along with the
year. The user can add their own name to the existing files under the
"Contributing author" when they start and they will be the "Original
author" of the new files they create.
Several changes were also made to the TeX management:
- LaTeX is run within a `reproduce/build/tex/build' directory now. Not in
the top reproduction pipeline directory. This helps keep all the
auxiliary TeX files and directories in that directory and keep the top
reproduction pipeline directory clean. After the final PDF is built, a
copy is put in the top reproduction pipeline directory for easy viewing.
- The PGFPlots preamble was also made more useful, allowing the name of
the `.tex' file to also be the name of the final plot that is
produced. This is a GREAT feature, because without it, the TiKZ
externalization would be based on order of the plots within the
paper. But now, order is irrelevant and we can even delete the TiKZ
files within the processing workhorse-Makefiles so the plots are
definitly rebuilt on the next run.
- The paper is now in a two-column format to be more similar to published
papers.
A tip on debugging Make was added to `README.md'.
|
|
The mandatory and optional (for example downloader) dependencies are now
checked at configure time so users can know what they may be missing before
the processing starts. Since its recommended to be run in parallel, it can
be hard to find what you are missing after running the pipeline. As part of
these checks, the program to use for downloading is now also set at
configure time, it is only used as a pre-defined (in `LOCAL.mk') variable
during Make's processing.
A small title was also added to discus the pipeline architecture that will
be filled in the next commit.
|
|
As described in the commens above `MINMAPSIZE' of `LOCAL.mk.in', the amount
of memory to map to HDD/SSD or keep in RAM is a local issue and not
relevant to the pipeline's results. So it is now defined in a
`gnuastro-local.conf' file.
To keep the Makefiles clean, this file is created by the `./configure'
script. To do this cleanly, the `./configure' script was also almost fully
re-written with better functionality now.
|
|
Until now, Gnuastro's `mmap' files were included in the `rm' commands of
`clean*' rules two times. But by setting `clean-mmap' as a dependency of
`clean', it is now only necessary to have them in the Makefile once. This
also makes the code much more cleaner.
|
|
Managing this symbolic link as a prerequisite that may or maynot be defined
just made the code too dirty. It is almost always needed, so it is now a
super-high-level prerequisite (first dependency of the `all' target, even
before the final PDF). In this way, we can be sure it is always built and
that nothing else depends on it.
If the user doesn't want it, they can simply remove it from the top
`Makefile'.
|
|
The choice of whether or not to make a PDF is now also a local system
issue, not a general pipeline issue. So it has been put in the new
`LOCAL.mk.in' file which replaces the old `DIRECTORIES.mk.in'. All local
settings (things that when changed should not be version-controlled) should
be defined in this file.
A sanity check was added to find if `./configure' has been run before
`make' or not (using the `LOCAL.mk' file which is an output of the
configuration step). If `LOCAL.mk' doesn't exist, an error will be printed
informing the user that `./configure' needs to be run first.
The configure script also provides more clear and hopefully better
information on its purpose and what must be done.
Since `make clean', it is executed even when `./configure' hasn't been run,
it will only delete the build directory and its contents when local
configuration has been done.
A `distclean' target was also added which will first "clean" the pipeline,
then delete the `LOCAL.mk.in' file.
To allow rules like `make' to be run even if `BDIR' isn't defined
(`./configure' hasn't been run yet), a fake `BDIR' is defined in such
cases.
|
|
Recently the filename keeping TeX macros for the versions was changed from
`versions.tex' to `initialization.tex' (since it also contained the build
directory). However, it was forgotten to correct the change of name in the
`.PHONY' targets, so it was not being rebuilt every time. This is corrected
now.
|
|
Let's start working on this pipeline independently with this first
commit. It is based on my previous experiences, but I had never made a
skeleton of a pipeline before, it was always within a working analysis.
But now that the pipeline has a separate repository for its self, we will
be able to work on it and use it as a base for future work and modify it to
make it even better. Hopefully in time (and with the help of others), it
will grow and become much more robust and useful.
|
