aboutsummaryrefslogtreecommitdiff
path: root/reproduce/src/make/dependencies.mk
AgeCommit message (Collapse)AuthorLines
2019-02-28Typo correction in libpng installationRaul Infante-Sainz-1/+1
In the libpng installation there was `ilibdir' instead of `ilidir'.
2019-02-28Python installation and related packages have been splitRaul Infante-Sainz-2/+24
Until now the installation of Python and its packages (numpy, astropy, astroquery, etc.) were done in the same `makefile'. With this commit the installation of Python and its packages have been split and now it is independent of the other programs. The installation of all Python packages needs to be written explicitely because pip is not used anymore.
2019-02-20Installed astroquery in the pipelineRaul Infante-Sainz-33/+3
All dependencies for building astroquery package have been done. Until nowthe Python dependencies were built in the same Makefile as the high level libraries and programs. But, because astroquery has many dependencies we split the Python and Python packages installation in a new Makefile. The installation of differents packages are done using Python and not pip, because we found some problems when doing it with pip. Apparently there are some interferences between the packages installed by the pip of the system and the pip installed as part of Python in the pipeline.
2019-02-13Imported recent work on building Python within the pipelineMohammad Akhlaghi-21/+51
Raul Infante-Sainz added the building of Python (along with the Numpy and Astropy packages) into the pipeline. That work is now being merged into the main pipeline branch. There was only this small problem that needed to be fixed: the Python tarball's name after unpacking is actually `Python-X.X.X' (with a captial P), not `python-X.X.X'. This has been corrected with this merge.
2019-02-13Minor cosmetic corrections in software tarball downloading ruleMohammad Akhlaghi-3/+3
The zip program wasn't placed correctly (in alphabetical order) and its URL command had the wrong indentation! Both have no effect at all on the processing and are only cosmetic (to help in readability).
2019-02-13Astropy installed in the pipelineRaul Infante-Sainz-30/+36
Astropy was added and one very important thing is that we have to use the pypi tarball (https://pypi.org/) (which is bootstrapped) and not the github tarball.
2019-02-07Numpy is now in the pipelineRaul Infante-Sainz-3/+20
Python needs some packages to be really useful. Numpy is the most important package for using Python and a lot of other packages depend on it. In this commit we add numpy to the pipeline. The tarball of numpy right now is fossies.
2019-02-07Python is now in the pipelineRaul Infante-Sainz-1/+8
Many projects use Python so it is necessary include it in the pipeline.
2019-02-05Ability to package project into tarball or zip fileMohammad Akhlaghi-9/+34
With this commit, it is now possible to package the project into a tarball or zip file, ready to be distributed to collaborators who only want to modify the final paper (and not do the analysis technicalities), or for uploading to sites like arXiv, or online LaTeX sharing pages.
2019-01-24Updated fork of metastore allows building on macOSMohammad Akhlaghi-3/+19
I recently found another fork of metastore that allows its build on macOS systems (https://github.com/mpctx/metastore). So I forked it into my own fork with several other corrections (mostly cosmetic!), so it is now much better suited for this pipeline. Raul Infante-Sainz has already tested the building of metastore on his macOS. In a previous test, we also noticed that libbsd should not be built on Mac systems, so it is now a conditional prerequisite to metastore.
2019-01-23Removing files ending with a ~ in the git checkout hookMohammad Akhlaghi-3/+4
While editing files, some editors create temporary `~' files that can cause problems in metastore's ability to delete their host directory if its not on the other branch. With this commit, a `find' call was added to the post checkout Git hook to remove such temporary files before metastore is called. Also, some comments were added to both git hooks to make them easier to understand for a beginner.
2019-01-23Corrections in metastore's git hooksMohammad Akhlaghi-1/+1
Two corrections were made in the Git hooks of Metastore. 1) The shebang at the start of the scripts now uses the absolute adress of our installed bash, not the relative `.local/bin/bash'. Note that it is possible to use Git within subdirectories and in that scenario, the `.local' will fail. 2) The `$$user' section was removed from the command to find the user's group. With the user as an argument, `groups' may print the user's name first, then their list of groups. When this happens, the script would be just repeating the user's name. But the raw `groups' command will list the groups of the running user.
2019-01-22Using fork of metastore to work when getpwuid isn't usableMohammad Akhlaghi-13/+33
After testing the built of Metastore on a server, I noticed that because its `/etc/passwd' doesn't have the list of users, the `getpwuid' call within metastore failed and wouldn't let it finish. So I looked into the code and was able to implement a solution to this problem by adding two options to it for default values for the user and group. Also, file attributes are not necessary in our (current) use case of metastore and caused crashes on our server, so they are also disabled.
2019-01-21Libbsd added as a dependency of MetastoreMohammad Akhlaghi-1/+12
Metastore depends on `bsd/string.h' to work properly (atleast on GNU/Linux systems). The first system I tried building with had that library, so I didn't notice! With this commit, we also build `libbsd' as part of the pipeline. Also, I couldn't find libbsd's version in any of its installed headers, so like Libjpeg, we can't actually check and will directly write our internal version into the paper.
2019-01-21Metastore package now installed to allow keeping file meta-dataMohammad Akhlaghi-9/+30
The pipeline heavily depends on file meta data (and in particular the modification dates), for example the configuration-Makefiles within the pipeline are set as prerequisites to the rules of the pipeline. However, when Git checks out a branch, it doesn't preserve the meta-data of the files unique to that branch (for example program source files or configuration-Makefiles). As a result, the rules that depend on them will be re-done. This is especially troublesome in the scenario of this reproducible paper project because we commonly need to switch between branches (for example to import recent work in the pipeline into the projects). After some searching, I think the Metastore program is the best solution. Metastore is now built as part of the pipeline and through two Git hooks, it is called by Git to store the original meta-data of files into a binary file that is version controlled (and managed by Metastore).
2019-01-20Removed webp and zstd as dependencies of libtiffMohammad Akhlaghi-1/+2
The TIFF library can optionally depend on webp [1] and zstd [2]. But these aren't commonly used in scientific datasets so to avoid a longer build and managing of extra dependencies (atleast for now!), we are disabling them. The problem is that they cause a dependency on the host system and if they are updated/removed, the relevant pipeline programs will crash. [1] https://en.wikipedia.org/wiki/WebP [2] https://en.wikipedia.org/wiki/Zstandard
2019-01-15Many network-related libraries ignored in Wget and cURLMohammad Akhlaghi-4/+25
Wget and cURL depend on many network related libraries by default and if they are present on the host operating system, they will be linked with. This causes problems for the pipeline when these libraries are updated on the host system. With this commit, I went through the configure time options of both Wget and cURL and removed any library that didn't seem related to merely downloading of files (possibly with SSL, because we do build OpenSSL in the pipeline). Also, I noticed a new version of cURL has come, so that is also updated.
2019-01-10cURL added as a dependency of GitMohammad Akhlaghi-1/+2
Git needs cURL in its build. Until now, by chance cURL was always built before Git, but while building this pipeline on a system, Git was built before cURL and we found the problem. I also noticed that we hadn't added `Your name <your@email.address>' to the `for-group' script. This has been corrected now.
2019-01-10ccache ignored and disabledMohammad Akhlaghi-0/+1
ccache is a super annoying program in the context of the reproduction pipeline. On systems that use it, the `gcc' and `g++' that are found in PATH are actually calls to `ccache' (so it can manage their call)! Two steps have been taken to ignore and disable ccache (if it isn't ignored properly!): 1) when making symbolic links to compilers, if a directory containing `ccache' is present in the PATH, it is first removed, then we look for the low-level programs that we won't be building. 2) The `CCACHE_DISABLE' environment variable is set to 1 where necessary (with the other environment variables).
2019-01-02Copyright year updated to 2019Mohammad Akhlaghi-1/+1
Since the current implementation of this pipeline officially started in 2018, all the files only had 2018 in their copyright years. This has now been corrected to 2018-2019.
2018-12-31Updated Gzip and Gnuastro versions to standard buildsMohammad Akhlaghi-1/+1
Both Gzip and Gnuastro were being bootstrapped personally from their Git repository until now. But fortunately a new release of both came out last week and so to make things standard we are now using their standard tarballs. I also noticed that we weren't checking the version of Gzip or mentioning it in the acknowledgement section. This was also corrected.
2018-12-18Forced linking of bin/sh and verbose Make in GitMohammad Akhlaghi-2/+3
While checking the build of the previous commit, a failure happened when linking `reproduce/build/dependencies/installed/bin/sh' with the built Bash (because the symbolic link already existed!). So a `-f' flag was added to `ln' to just change it without complaining. I also noticed that the Git build was also not in verbose mode. So this has also been corrected.
2018-12-13Fixed numthreads in dependencies alsoMohammad Akhlaghi-4/+4
Some problems with using the number of threads in dependency building were fixed.
2018-12-05CFITSIO configure script looks for our build of cURL on Mac OSMohammad Akhlaghi-3/+20
On Mac OS systems, CFITSIO doesn't use path to find the `curl-config' program (used by to give the library header and linking options), but uses an absolute path. Therefore the only way we can ask CFITSIO to look into our build of cURL is to manually change that absolute address. Also, since all the libraries are now linked dynamically, we don't need the extra linking flags when building WCSLIB (so it finds CFITSIO).
2018-12-05Forgotten line break comment addedMohammad Akhlaghi-6/+4
Mac OS's `install_name_tool' program's command is broken up into two lines, but I had forgotten to add a line-break so the command would fail. I didn't notice it myself because this error only shows up on Mac OS systems that actually need to parse it.
2018-12-04Shared library absolute address fixed in Libgit2 and WCSLIB on Mac OSMohammad Akhlaghi-21/+52
The build systems of Libgit2 and WCSLIB on Mac OS does not account for installation in non-standard addresses: `Libgit2' keeps the absolute address of its build directory (not the installation directory) and WCSLIB doesn't write any absolute address at all (so the system uses the first one it finds). To address these issues, we are now using Mac OS's `install_name_tool' program to fix the absolute path within the installed shared library. Since the version of the library is actually present in its shared library name, in `dependency-versions.mk' we have also separated these two libraries so later when their version is changed, we are careful in correcting the shared library name also.
2018-12-03Gnuastro's dependencies fully sorted by build timeMohammad Akhlaghi-4/+9
In the previous commit, I forgot to actually add some changes to the staging area before committing an pushing. So some of the changes discussed in the previous commit and now commited.
2018-12-03Gnuastro's dependencies sorted by length of buildMohammad Akhlaghi-1/+1
Make builds the dependencies of each package based on the order in the prerequisites list. So when building in parallel, it can greatly help the over-all build speed if larger packages are built first. Therefore the three larger Gnuastro dependencies are now placed at earlier places of the prerequisites.
2018-12-03Preference for shared library linkingMohammad Akhlaghi-20/+43
Some high-level programs like Wget and cURL need to be built in shared mode because they also include dynamic loading of libraries. Therefore, if we only build the lower-level libraries in static mode, our own build will be ignored and they will go and find the system's shared libraries to link with. Because of this, for now, we have manually set the `static_build' variable in the configure script to `no'. Also, if the downloader fails, we'll delete the output (an empty file in the case of Wget) because it interefers with a target definition.
2018-12-02Wget and OpenSSL now installed as a basic dependencyMohammad Akhlaghi-44/+26
The TeX Live installer needs Wget to operate smoothly, especially on recent Mac OS systems that don't have Wget pre-installed. Also, it would be good for the pipeline to have its own downloader. So with this commit, the pipeline also installs Wget and OpenSSL which is a dependency. Many other small changes/fixes were done in this process.
2018-12-01Improved TeXLive installation checksMohammad Akhlaghi-25/+47
Thanks to the check by Cristina Martínez, some corrections were made when we attempt to download and install TeXLive. Further checks and corrections will be in due time.
2018-11-30Downloading TeX Live tarball in general download ruleMohammad Akhlaghi-29/+26
Until now, we were downloading TeX Live's tarball within the same rule that unpacked it. But this causes problems for situations were it cannot be downloaded within the pipeline (and manually placed in the tarball directory). So now, the TeX Live downloader is treated like all the other downloaders.
2018-11-30Setting libgit2 to build statically in any caseMohammad Akhlaghi-1/+8
On the Libgit2 webpage, it has recommended to build it statically on Mac systems. By default we are doing this on Linux systems, but the `-static' flag failed on Mac. But apparently CMake might be able to deal with the issue in a different way.
2018-11-29Optional rpath link option, CMake search path set, static WCSLIBMohammad Akhlaghi-4/+6
Thanks to a test build on Raul Infante Sainz's Mac OS computer, we were able to address some issues and will be trying them after this commit: a) The LLVM linker on that computer didn't recognize `-rpath-link'! So at configure time we now check for it and only include it when the linker recognizes it. b) CMake corrections: 1) `CMAKE_LIBRARY_PATH' is now defined so CMake can look in our custom directory to find the necessary libraries. 2) To build and install the CMake built programs, we now simply use `make' and `make install'. c) To avoid particular linking problems with WCSLIB (which has special problems compared to other libraries), we are now deleting the shared library version (both on GNU and Mac systems).
2018-11-29Ignoring building of GCC for pipelineMohammad Akhlaghi-10/+14
GNU Binutils (which provides the GNU Linker) is not ported to Mac OS systems. GCC also takes a very long time to build, and if we are to still have linking problems with LLVM's linker, it would be better to just ignore GCC also and use the system's C compiler and linker together. So for the time being, GCC isn't a main target of the basic dependencies and won't be installed. But we have kept the rules that were checked on a GNU/Linux operating system.
2018-11-29GCC is now installed by the pipelineMohammad Akhlaghi-31/+30
The pipeline now installs GCC and all its necessary prerequisites.
2018-11-28Changed -rpath to -rpath-link for LLVMMohammad Akhlaghi-1/+2
The linker of LLVM version 10.0.0 (clang-1000.11.45.5) doesn't recognize the `-rpath' linker option! After some searching, apparently it does recognize `-rpath-link' so we are testing with that now.
2018-11-28Better control of shared library linkingMohammad Akhlaghi-13/+17
Until now we weren't explicity writing the full path of the dynamic libraries necessary for linking a program. But now with `-Wl,-rpath=$(ildir)' we ensure that the linker keeps the address of the dynamic libraries necessary for linking at linking time, not running time. Also, `pkg-config' is also built when preparing the basics. Several other minor corrections were made thanks to the great help of Raúl Infante Sainz.
2018-11-26High-level dependencies build without system's PATHMohammad Akhlaghi-27/+11
The high-level dependencies are now built without having access to the system's PATH. To do this, all the necessary software that we aren't building ourselves are now brought into the installed `bin/' directory using a symbolic link to the corresponding software on the host. To do this, it was also necessary to increase the number of basic/low-level packages that we are building, and add several more (Diffutils and Findutils). With this process in place, we now have a list of the exact software packages that we are not building our selves, enabling easy building of all such dependencies in the future.
2018-11-25Pipeline now downloads and uses an input datasetMohammad Akhlaghi-1/+6
In most analysis situations (except for simulations), an input dataset is necessary, but that part of the pipeline was just left out and a general `SURVEY' variable was set and never used. So with this commit, we actually use a sample FITS file from the FITS standard webpage, show it (as well as its histogram) and do some basic calculations on it. This preparation of the input datasets is done in a generic way to enable easy addition of more datasets if necessary.
2018-11-22Ghostscript was updated to version 9.26Mohammad Akhlaghi-1/+1
A new version of the ghostscript package is now available, so the used version in the pipeline (previously 9.25) has been incremented to 9.26.
2018-11-21Changing of README files in checklistMohammad Akhlaghi-1/+0
When you point to this project, the `README.md' file is the default file that opens on GitLab and other online git repositories. Since a reproduction pipeline project is different from the actual pipeline, its best for the default text that opens to describe the paper, not the pipeline. The old `README.md' is also kept, but its now called `REAME-pipeline.md'.
2018-11-20Configure script passes if TeX Live was not finalizedMohammad Akhlaghi-55/+67
When there is a problem in creating the final TeX Live installation, the previous version of the pipeline would not understand and just finish! We would later have problems in building the paper. So the following series of steps were taken: to keep the recipes in a shorter and easier to understand way, the steps to install TeX Live are now one rule (that produce `.local/bin/texlive-ready-tlmgr' when its successful), and the steps to install the necessary packages are in another rule (that produce `.local/bin/texlive-ready' when its successful). When control comes back inside configure, if `.local/bin/texlive-ready' isn't there (something failed during the TeX Live installation, or building packages), then the whole TeX Live installation directory (`.local/texlive') will be deleted along with the two output files. This will help ensure that future steps can check the availablility of a working TeX Live in the pipeline.
2018-11-20Not including system's libraries in high-level dependenciesMohammad Akhlaghi-4/+7
The system's libraries are no longer used in building the higher-level dependencies. Also, thanks to Raul Infante Sainz, we found out that Bash's build script was still removing the extra directory information (not good!).
2018-11-20GNU Coreutils now built in basic dependenciesMohammad Akhlaghi-29/+17
GNU Coreutils are basic programs that can help in the configuration of higher-level programs. Because of that, it was a dependency of almost all software built in `dependencies.mk'. To make things more clear, easier to read and faster (when building in parallel), the building of Coreutils is now moved to the `dependencies-basic.mk' rules. There, it is built along-side Bash. Since `dependenceis-basic.mk' is run and completed before `dependencies.mk', with this, we can be sure that Coreutils is present by the time we want to build the higher-level programs. Also, Zlib is now added as a dependency of Git also (it is necessary for its build).
2018-11-19Libtool set as Gnuastro dependencyMohammad Akhlaghi-2/+3
Until now, we were building Libtool as a high-level `top-level-programs' software. But all tools that use the `./configure' script already have a version of Libtool in them. So ultimately the `libtool' in the PATH is not used. However, in the case of Gnuastro, we need libtool for running BulidProgram. So in effect, its a dependency of Gnuastro.
2018-11-19Removed GNU Binutils, CMake's built with its own bootstrapMohammad Akhlaghi-66/+106
When the C compiler is not GNU GCC, linking with GNU Binutils is going to cause problems. So until the time that we can include GCC into this pipeline, its best to avoid Binutils also. Also, for building CMake, we were relying on an installed CMake, but now, we are using its own `./bootstrap' script, so it can be built even if the host system doesn't have CMake. Also, for TeX Live, we are now setting a custom file as main target to avoid complications with symbolic links as targets in Make. Finally, when the user says they don't want to re-write an existing configuration file, no extra notices will be printed and the configure script will immediately start building programs.
2018-11-18Updated README and README.md for new dependency building featuresMohammad Akhlaghi-1/+1
The two README files have been updated to explain the new feature of downloading and building dependencies.
2018-11-18Pipeline also installs TeX live and necessary packagesMohammad Akhlaghi-18/+72
Since the final product of the pipeline is a LaTeX-created PDF file, it was necessary to also have LaTeX within the pipeline. With this commit, TeX Live is also built as part of the configuration and all the necessary packages to build the PDF are also installed and mentioned in the paper along with their versions.
2018-11-17TeX Live also built within the pipeline (no extra packages yet)Mohammad Akhlaghi-2/+22
TeX Live is now also downloaded and built by the reproduction pipeline. Currently on the basic (TeX and LaTeX) source is built but no extra packages, so the PDF building will fail. We'll add them in the next commit.
generated by cgit v1.2.1 (git 2.18.0) at 2024-12-23 15:02:43 +0000