aboutsummaryrefslogtreecommitdiff
path: root/reproduce/software/make/python.mk
AgeCommit message (Collapse)AuthorLines
2022-01-21IMPORTANT: Updates to almost all softwareMohammad Akhlaghi-117/+196
This commit primarily affects the configuration step of Maneage'd projects, and in particular, updated versions of the many of the software (see P.S.). So it shouldn't affect your high-level analysis other than the version bumps of the software you use (and the software's possibly improve/changed behavior). The following software (and thus their dependencies) couldn't be updated as described below: - Cryptography: isn't building because it depends on a new setuptools-rust package that has problems (https://savannah.nongnu.org/bugs/index.php?61731), so it has been commented in 'versions.conf'. - SecretStorage: because it depends on Cryptography. - Keyring: because it depends on SecretStorage. - Astroquery: because it depends on Keyring. This is a "squashed" commit after rebasing a development branch of 60 commits corresponding to a roughly two-month time interval. The following people contributed to this branch. - Boudewijn Roukema added all the R software infrastructure and the R packages, as well as greatly helping in fixing many bugs during the update. - Raul Infante-Sainz helped in testing and debugging the build. - Pedram Ashofteh Ardakani found and fixed a bug. - Zahra Sharbaf helped in testing and found several bugs. Below a description of the most noteworthy points is given. - Software tarballs: all updated software now have a unified format tarball (ustar; if not possible, pax) and unified compression (Lzip) in Maneage's software repository in Zenodo (https://doi.org/10.5281/zenodo.3883409). For more on this See https://savannah.nongnu.org/task/?15699 . This won't affect any extra software you would like to add; you can use any format recognized by GNU Tar, and all common compression algorithms. This new requirement is only for software that get merged to the core Maneage branch. - Metastore (and thus libbsd and libmd) moved to highlevel: Metastore (and the packages it depends on) is a high-level product that is only relevant during the project development (like Emacs!): when the user wants the file meta data (like dates) to be unchanged after checking out branches. So it should be considered a high-level software, not basic. Metastore also usually causes many more headaches and error messages, so personally, I have stopped using it! Instead I simply merge my branches in a separate clone, then pull the merge commit: in this way, the files of my project aren't re-written during the checkout phase and therefore their dates are untouched (which can conflict with Make's dates on configuration files). - The un-official cloned version of Flex (2.6.4-91 until this commit) was causing problems in the building of Netpbm, so with this commit, it has been moved back to version 2.6.4. - Netpbm's official page had version 10.73.38 as the latest stable tarball that was just released in late 2021. But I couldn't find our previously-used version 10.86.99 anywhere (to see when it was released and why we used it! Its at last more than one year old!). So the official stable version is being used now. - Improved instructions in 'README.md' for building software environment in a Docker container (while having project source and output data products on the local system; including the usage of the host's '/dev/shm' to speed up temporary operations). - Until now, the convention in Maneage was to put eight SPACE characters before the comment lines within recipes. This was done because by default GNU Emacs (also many other editors) show a TAB as eight characters. However, in other text editors, online browsers, or even the Git diff, a TAB can correspond to a different number of characters. In such cases, the Maneage recipes wouldn't look too interesting (the comments and the recipe commands would show a different indentation!). With this commit, all the comment lines in the Makefiles within the core Maneage branch have a hash ('#') as their first character and a TAB as the second. This allows the comment lines in recipes to have the same indentation as code; making the code much more easier to read in a general scenario including a 'git diff' (editor agnostic!). P.S. List of updated software with their old and new versions - Software with no version update are not mentioned. - The old version of newly added software are shown with '--'. Name (Basic) Old version New version ------------ ----------- ----------- Bzip2 1.0.6 1.0.8 CURL 7.71.1 7.79.1 Dash 0.5.10.2 0.5.11.5 File 5.39 5.41 Flock 0.2.3 0.4.0 GNU Bash 5.0.18 5.1.8 GNU Binutils 2.35 2.37 GNU Coreutils 8.32 9.0 GNU GCC 10.2.0 11.2.0 GNU M4 1.4.18 1.4.19 GNU Readline 8.0 8.1.1 GNU Tar 1.32 1.34 GNU Texinfo 6.7 6.8 GNU diffutils 3.7 3.8 GNU findutils 4.7.0 4.8.0 GNU gmp 6.2.0 6.2.1 GNU grep 3.4 3.7 GNU gzip 1.10 1.11 GNU libunistring 0.9.10 1.0 GNU mpc 1.1.0 1.2.1 GNU mpfr 4.0.2 4.1.0 GNU nano 5.2 6.0 GNU ncurses 6.2 6.3 GNU wget 1.20.3 1.21.2 Git 2.28.0 2.34.0 Less 563 590 Libxml2 2.9.9 2.9.12 Lzip 1.22-rc2 1.22 OpenSLL 1.1.1a 3.0.0 Patchelf 0.10 0.13 Perl 5.32.0 5.34.0 Podlators -- 4.14 Name (Highlevel) Old version New version ---------------- ----------- ----------- Apachelog4cxx 0.10.0-603 0.12.1 Astrometry.net 0.80 0.85 Boost 1.73.0 1.77.0 CFITSIO 3.48 4.0.0 Cmake 3.18.1 3.21.4 Eigen 3.3.7 3.4.0 Expat 2.2.9 2.4.1 FFTW 3.3.8 3.3.10 Flex 2.6.4-91 2.6.4 Fontconfig 2.13.1 2.13.94 Freetype 2.10.2 2.11.0 GNU Astronomy Utilities 0.12 0.16.1-e0f1 GNU Autoconf 2.69.200-babc 2.71 GNU Automake 1.16.2 1.16.5 GNU Bison 3.7 3.8.2 GNU Emacs 27.1 27.2 GNU GDB 9.2 11.1 GNU GSL 2.6 2.7 GNU Help2man 1.47.11 1.48.5 Ghostscript 9.52 9.55.0 ICU -- 70.1 ImageMagick 7.0.8-67 7.1.0-13 Libbsd 0.10.0 0.11.3 Libffi 3.2.1 3.4.2 Libgit2 1.0.1 1.3.0 Libidn 1.36 1.38 Libjpeg 9b 9d Libmd -- 1.0.4 Libtiff 4.0.10 4.3.0 Libx11 1.6.9 1.7.2 Libxt 1.2.0 1.2.1 Netpbm 10.86.99 10.73.38 OpenBLAS 0.3.10 0.3.18 OpenMPI 4.0.4 4.1.1 Pixman 0.38.0 0.40.0 Python 3.8.5 3.10.0 R 4.0.2 4.1.2 SWIG 3.0.12 4.0.2 Util-linux 2.35 2.37.2 Util-macros 1.19.2 1.19.3 Valgrind 3.15.0 3.18.1 WCSLIB 7.3 7.7 Xcb-proto 1.14 1.14.1 Xorgproto 2020.1 2021.5 Name (Python) Old version New version ------------- ----------- ----------- Astropy 4.0 5.0 Beautifulsoup4 4.7.1 4.10.0 Beniget -- 0.4.1 Cffi 1.12.2 1.15.0 Cryptography 2.6.1 36.0.1 Cycler 0.10.0 0.11.0+} Cython 0.29.21 0.29.24 Esutil 0.6.4 0.6.9 Extension-helpers -- 0.1 Galsim 2.2.1 2.3.3 Gast -- 0.5.3 Jinja2 -- 3.0.3 MPI4py 3.0.3 3.1.3 Markupsafe -- 2.0.1 Numpy 1.19.1 1.21.3 Packaging -- 21.3 Pillow -- 8.4.0 Ply -- 3.11 Pyerfa -- 2.0.0.1 Pyparsing 2.3.1 3.0.4 Pythran -- 0.11.0 Scipy 1.5.2 1.7.3 Setuptools 41.6.0 58.3.0 Six 1.12.0 1.16.0 Uncertainties 3.1.2 3.1.6 Wheel -- 0.37.0 Name (R) Old version New version -------- ----------- ----------- Cli -- 2.5.0 Colorspace -- 2.0-1 Cowplot -- 1.1.1 Crayon -- 1.4.1 Digest -- 0.6.27 Ellipsis -- 0.3.2 Fansi -- 0.5.0 Farver -- 2.1.0 Ggplot2 -- 3.3.4 Glue -- 1.4.2 GridExtra -- 2.3 Gtable -- 0.3.0 Isoband -- 0.2.4 Labeling -- 0.4.2 Lifecycle -- 1.0.0 Magrittr -- 2.0.1 MASS -- 7.3-54 Mgcv -- 1.8-36 Munsell -- 0.5.0 Pillar -- 1.6.1 R-Pkgconfig -- 2.0.3 R6 -- 2.5.0 RColorBrewer -- 1.1-2 Rlang -- 0.4.11 Scales -- 1.1.1 Tibble -- 3.1.2 Utf8 -- 1.2.1 Vctrs -- 0.3.8 ViridisLite -- 0.4.0 Withr -- 2.4.2
2021-01-02Copyright year updated in all source filesMohammad Akhlaghi-2/+2
Having entered 2021, it was necessary to update the copyright years at the top of the source files. We recommend that you do this for all your project-specific source files also.
2020-08-08IMPORTANT: New software versions (17 basic, 16 high-level and 7 Python)Mohammad Akhlaghi-1/+4
It was a long time that the Maneage software versions hadn't been updated. With this commit, the versions of all basic software were checked and 17 of that had newer versions were updated. Also, 16 high-level programs and libraries were updated as well as 7 Python modules. The full list is available below. Basic Software (affecting all projects) --------------------------------------- bash 5.0.11 -> 5.0.18 binutils 2.32 -> 2.35 coreutils 8.31 -> 8.32 curl 7.65.3 -> 7.71.1 file 5.36 -> 5.39 gawk 5.0.1 -> 5.1.0 gcc 9.2.0 -> 10.2.0 gettext 0.20.2 -> 0.21 git 2.26.2 -> 2.28.0 gmp 6.1.2 -> 6.2.0 grep 3.3 -> 3.4 libbsd 0.9.1 -> 0.10.0 ncurses 6.1 -> 6.2 perl 5.30.0 -> 5.32.0 sed 4.7 -> 4.8 texinfo 6.6 -> 6.7 xz 5.2.4 -> 5.2.5 Custom programs/libraries ------------------------- astrometrynet 0.77 -> 0.80 automake 0.16.1 -> 0.16.2 bison 3.6 -> 3.7 cfitsio 3.47 -> 3.48 cmake 3.17.0 -> 3.18.1 freetype 2.9 -> 2.10.2 gdb 8.3 -> 9.2 ghostscript 9.50 -> 9.52 gnuastro 0.11 -> 0.12 libgit2 0.28.2 -> 1.0.1 libidn 1.35 -> 1.36 openmpi 4.0.1 -> 4.0.4 R 3.6.2 -> 4.0.2 python 3.7.4 -> 3.8.5 wcslib 6.4 -> 7.3 yaml 0.2.2 -> 0.2.5 Python modules -------------- cython 0.29.6 -> 0.29.21 h5py 2.9.0 -> 2.10.0 matplotlib 3.1.1 -> 3.3.0 mpi4py 3.0.2 -> 3.0.3 numpy 1.17.2 -> 1.19.1 pybind11 2.4.3 -> 2.5.0 scipy 1.3.1 -> 1.5.2
2020-07-07Fixed typo that lead to crash when building healpyMarius Peper-1/+1
Until now, if a project needed the healpy software package, Maneage would crash with the following error message (abridged for full name in build directory). This was caused by a typo in the version of 'healpix' (the dependency of 'healpy'). make: *** No rule to make target '.../version-info/proglib/healpix-' With this commit, the typo in line 334 of 'python.mk' is fixed, so that when '$(ipydir)/healpy-$(healpy-version)' gets called it correctly searches for a rule to make '$(ibidir)/healpix-$(healpix-version)'.
2020-06-27IMPORTANT: many improvements to low-level software building phaseMohammad Akhlaghi-530/+399
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause conflicts to your project if you have changed the software building Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and 'python.mk'). If your project has only added analysis, it shouldn't be affected. This is a large commit, involving a long series of corrections in a differnt branch which is now finally being merged into the core Maneage branch. All changes were related and came up naturally as the low-level infrastructure was improved. So separating them in the end for the final merge would have been very time consuming and we are merging them as one commit. In general, the software building Makefiles are now much more easier to read, modify and use, along with several new features that have been added. See below for the full list. - Until now, Maneage needed the host to have a 'make' implementation because Make was necessary to build Lzip. Lzip is then used to uncompress the source of our own GNU Make. However, in the minimalist/slim versions of operating systems (for example used to build Docker images) Make isn't included by default. Since Lzip was the only program before our own GNU Make was installed, we consulting Antonio Diaz Diaz (creator of Lzip) and he kindly added the necessary functionality to a new version of Lzip, which we are using now. Hence we don't need to assume a Make implementation on the host any more. With this commit, Lzip and GNU Make are built without Make, allowing everything else to be safely built with our own custom version of GNU Make and not using the host's 'make' at all. - Until recently (Commit 3d8aa5953c4) GNU Make was built in 'basic.mk'. Therefore 'basic.mk' was written in a way that it can be used with other 'make' implementations also (i.e., important shell commands starting with '&&' and ending in '\' without any comments between them!). Furthermore, to help in style uniformity, the rules in 'high-level.mk' and 'python.mk' also followed a similar structure. But due to the point above, we can now guarantee that GNU Make is used from the very first Makefile, so this hard-to-read structure has been removed in the software build recipes and they are much more readable and edit-friendly now. - Until now, the default backup servers where at some fixed URLs, on our own pages or on Gitlab. But recently we uploaded all the necessary software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is more suitable for this task (it promises longevity, has a fixed DOI, while allowing us to add new content, or new software tarball versions). With this commit, a small script has been written to extract the most recent Zenodo upload link from the Zenodo DOI and use it for downloading the software source codes. - Until now, we primarily used the webpage of each software for downloading its tarball. But this caused many problems: 1) Some of them needed Javascript before the download, 2) Some URLs had a complex dependency on the version number, 3) some servers would be randomly down for maintenance and etc. So thanks to the point above, we now use the Zenodo server as the primary download location. However, if a user wants to use a custom software that is not (yet!) in Zenodo, the download script gives priority to a custom URL that the users can give as Make variables. If that variable is defined, then the script will use that URL before going onto Zenodo. We now have a special place for such URLs: 'reproduce/software/config/urls.conf'. The old URLs (which are a good documentation themselves) are preserved here, but are commented by default. - The software source code downloading and checksum verification step has been moved into a Make function called 'import-source' (defined in the 'build-rules.mk' and loaded in all software Makefiles). Having taken all the low-level steps there, I noticed that there is no more need for having the tarball as a separate target! So with this commit, a single rule is the only place that needs to be edited/added (greatly simplifying the software building Makefiles). - Following task #15272, A new option has been added to the './project' script called '--all-highlevel'. When this option is given, the contents of 'TARGETS.conf' are ignored and all the software in Maneage are built (selected by parsing the 'versions.conf' file). This new option was added to confirm the extensive changes made in all the software building recipes and is great for development/testing purposes. - Many of the software hadn't been tested for a long time! So after using the newly added '--all-highlevel', we noticed that some need to be updated. In general, with this commit, 'libpaper' and 'pcre' were added as new software, and the versions of the following software was updated: 'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in' shell script was added in 'reproduce/software/shell/' which is installed with 'libpaper'. - Even though we intentionally add the necessary flags to add RPATH inside the built executable at compilation time, some software don't do it (different software on different operating systems!). Until now, for historical reasons this check was done in different ways for different software on GNU/Linux sytems. But now it is unified: if 'patchelf' is present we apply it. Because of this, 'patchelf' has been put as a top-level prerequisite, right after Tar and is installed before anything else. - In 'versions.conf', GNU Libtool is recognized as 'libtool', but in 'basic.mk', it was 'glibtool'! This caused many confusions and is corrected with this commit (in 'basic.mk', it is also 'libtool'). - A new argument is added to the './project' script to allow easy loading of the project's shell and environment for fast/temporary testing of things in the same environment as the project. Before activating the project's shell, we completely remove all host environment variables to simulate the project's environment. It can be called with this command: './project shell'. A simple prompt has also been added to highlight that the user is using the Maneage shell!
2020-06-02Core software build before using Make to build other softwareMohammad Akhlaghi-0/+1
Until now, Maneage would only build Flock before building everything else using Make (calling 'basic.mk') in parallel. Flock was necessary to avoid parallel downloads during the building of software (which could cause network problems). But after recently trying Maneage on FreeBSD (which is not yet complete, see bug #58465), we noticed that the BSD implemenation of Make couldn't parse 'basic.mk' (in particular, complaining with the 'ifeq' parts) and its shell also had some peculiarities. It was thus decided to also install our own minimalist shell, Make and compressor program before calling 'basic.mk'. In this way, 'basic.mk' can now assume the same GNU Make features that high-level.mk and python.mk assume. The pre-make building of software is now organized in 'reproduce/software/shell/pre-make-build.sh'. Another nice feature of this commit is for macOS users: until now the default macOS Make had problems for parallel building of software, so 'basic.mk' was built in one thread. But now that we can build the core tools with GNU Make on macOS too, it uses all threads. Furthermore, since we now run 'basic.mk' with GNU Make, we can use '.ONESHELL' and don't have to finish every line of a long rule with a backslash to keep variables and such. Generally, the pre-make software are now organized like this: first we build Lzip before anything else: it is downloaded as a simple '.tar' file that is not compressed (only ~400kb). Once Lzip is built, the pre-make phase continues with building GNU Make, Dash (a minimalist shell) and Flock. All of their tarballs are in '.tar.lz'. Maneage then enters 'basic.mk' and the first program it builds is GNU Gzip (itself packaged as '.tar.lz'). Once Gzip is built, we build all the other compression software (all downloaded as '.tar.gz'). Afterwards, any compression standard for other software is fine because we have it. In the process, a bug related to using backup servers was found in 'reproduce/analysis/bash/download-multi-try' for calling outside of 'basic.mk' and removed Bash-specific features. As a result of that bug-fix, because we now have multiple servers for software tarballs, the backup servers now have their own configuration file in 'reproduce/software/config/servers-backup.conf'. This makes it much easier to maintain the backup server list across the multiple places that we need it. Some other minor fixes: - In building Bzip2, we need to specify 'CC' so it doesn't use 'gcc'. - In building Zip, the 'generic_gcc' Make option caused a crash on FreeBSD (which doesn't have GCC). - We are now using 'uname -s' to specify if we are on a Linux kernel or not, if not, we are still using the old 'on_mac_os' variable. - While I was trying to build on FreeBSD, I noticed some further corrections that could help. For example the 'makelink' Make-function now takes a third argument which can be a different name compared to the actual program (used for examle to make a link to '/usr/bin/cc' from 'gcc'. - Until now we didn't know if the host's Make implementation supports placing a '@' at the start of the recipe (to avoid printing the actual commands to standard output). Especially in the tarball download phase, there are many lines that are printed for each download which was really annoying. We already used '@' in 'high-level.mk' and 'python.mk' before, but now that we also know that 'basic.mk' is called with our custom GNU Make, we can use it at the start for a cleaner stdout. - Until now, WCSLIB assumed a Fortran compiler, but when the user is on a system where we can't install GCC (or has activated the '--host-cc' option), it may not be present and the project shouldn't break because of this. So with this commit, when a Fortran compiler isn't present, WCSLIB will be built with the '--disable-fortran' configuration option. This commit (task #15667) was completed with help/checks by Raul Infante-Sainz and Boud Roukema.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-8/+11
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf
2020-05-06Corrected latex citation of sip_tpv program (no more \ before _)Mohammad Akhlaghi-1/+1
Until now there we had manually inserted a `\' before the `_' of sip_tpv program. However, we also recently added a step in the configure script to add a `\' before every `_' when writing the final LaTeX macro. This was because some C compilers (when the host's is used) have an `_' in their version that we had no control over. With this commit, the `\' is removed from `sip_tpv' in its build-rule and we let the backslash be inserted automatically.
2020-05-06Software are rebuilt automatically with change of versionMohammad Akhlaghi-56/+56
Until now, when you changed the version of a software in an already-built system, its tarball would be downloaded, but it wouldn't actually build. The only way would be to force the build by deleting the main target of that file (under `.local/version-info/TYPE/PROGRAM'). This was because the tarballs were an order-only prerequisite which was implemented some time ago based on some theoretical argument that if the tarball dates changes, the software should not be rebuilt (because we check the checksum). However, the problems this causes are more than those it solves: Users may forget to delete the main target of the program and mistakenly think that they are using the new version. The fact that all the numbers going into the paper also contain this number further hides this. With this commit, tarballs are no longer order-only and any time a version of a software is updated, it will be automatically built and not cause confusion and manual intervention by the users. As a result of this change, I also had to correct the way we find the tarball from the list of prerequisites.
2020-04-27Configuration: improved version separation from tarball nameBoud Roukema-13/+15
Until now, the sed script for determining URL download rules in the three software building Makefiles (`basic.mk', `high-level.mk' and `python.mk') considered package names such as `fftw-3...` and `fftw2-2.1...` to be identical. As the example above shows, this would make it hard to include some software that may hav conflicting non-number names. With this commit, the SED script that is used to separate the version from the tarball name only matches numbers that are after a dash (`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but `fftw-3-...` and `fftw2-2.1...` to be different. As a result of this change, the `elif' check for some of the other programs like `m4', or `help2man' was also corrected in all three Makefiles. While doing this check on all the software, we noticed that `zlib-version' is being repeated two times in `version.conf' so it was removed. It caused no complications, because both were the same number, but could lead to bugs later.
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-11/+8
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-2/+2
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-04-12Configure (numpy): added --std=c99 to CFLAGS to fix errorMohammad Akhlaghi-0/+1
Elham Saremi recently reported the following errors when building Numpy in numpy/core/src/npysort/radixsort.c.src: "error: 'for' loop initial declarations are only allowed in C99 or C11 mode". After some searching, I found Issue 14147[1] on Numpy's main repository about the same problem. As described there, apparently Numpy needs C99 compiler, but doesn't check for it or set it manually (for some strange reason, leaving it to the packagers to check if they want!!!). Any way, after a check with Elham, we were able to fix it by adding the `--std=c99' to CFLAGS of Numpy's build and with this commit, it is now being implemented in the core Maneage to not cause a problem in any other project. [1] https://github.com/numpy/numpy/issues/14147
2020-04-06Astropy now depending on the Expat library to fix internal conflictRaul Infante-Sainz-7/+23
Until now, Astropy was instructed to build its own internal copy of the Expat library. However, with the recent commits before, Maneage now includes an installation of Expat and Astropy can't keep the two (its internal version and the project's version) separate, so they conflict and don't let Astropy get built. With this commit, the problem is fixed by setting the Expat library as an explicit dependency of Astropy and asking Astropy to ignore its internal copy. While doing this, I recognized that it is much easier and elegant to add steps in various stages of the `pybuild' function through hooks instead of variables. So the fifth argument of the `pybuild' function was removed and now it actually checks if hooks are defined as functions and if so, they will be called. The `pyhook_after' function was also implemented in the installation of `pybind11' (which needed it, given that the 5th argument of `pybuild' was removed) and after doing a test-build, I noticed that two lines were not ending with a `\' in `boost' (a dependency of `pybind11'). Commit written originally by Mohammad Akghlaghi
2020-03-20Adding PyYAML, Html5lib, and Beautifulsoup4 as prerequsites of AstropyRaul Infante-Sainz-4/+4
Until this commit, PyYAML was not set as prerequisite of Astropy. This package is an optional dependency of Astropy for some particular functions. However, we have already included PyYAML into this project so it is available. With this commit, PyYAML has been set as a prerequisite of Astropy. In addition to this, Html5lib and Beautifulsoup4 have been also added as prerequsites of Astropy (and removed from Astroquery prerequisites). I noticed that both of them are optional dependencies of Astropy.
2020-03-17Astroquery updated to version 0.4Raul Infante-Sainz-1/+1
In the last update of Astropy to version 4.0 they removed some things that the previous version of Astroquery needs. As a consequence, it is also necessary to update the Astroquery version to be a ble to run with the Astropy 4.0. With this commit, the update of Astroquery to it most recent version (0.4) has been done.
2020-02-11Using backup server when original download server failsMohammad Akhlaghi-1/+1
Until now, the main download script could only check one server for the given URL. However, ultimately the actual server that a file is downloaded from is irrelevant for this project: we actually check its checksum. Especially in the case of software (which are distributed over many servers), this can usually be very annoying: the servers may not properly communicate with the running system and even the 10 trials won't be enough. With this commit, the download script `reproduce/analysis/bash/download-multi-try' can take a new optional argument (a 5th argument). It assumes this argument is a space-separated list of server(s) to use as backup for the original URL. When downloading from the original URL fails, it will look into this list and try downloading the same file from each given server.
2020-01-13Updated verion of Astropy to 4.0 the most recent oneRaul Infante-Sainz-1/+1
Newer versions of Astropy package has been released. With this commit, it has been updated. It has been increased from v3.2.1 to v4.0
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-2/+2
Now that its 2020, its necessary to include this year in the copyright statements.
2019-12-18Removed extra backslash in Jeepney prerequisitesRaul Infante-Sainz-1/+1
An extra backslash in the prerequisites of Jeepney Python package was causing a crash in the installation of that software. With this commit, this problem has been fixed by removing the backslash.
2019-11-08Matplotlib problem on macOS system with GNU GCC fixedMohammad Akhlaghi-0/+6
Until now when building Matplotlib on macOS systems, we were using the default C compiler. However, while Yahya Sefidbakht (previously) and Mahdieh Nabavi (now) were trying to build the template, on their macOS using the GNU Compiler Collection (GCC), we found that Matplotlib needs special macOS headers that GCC doesn't recognize. With this commit, when Matplotlib is being built on macOS systems, it uses `clang' and this fixed the problem (so far checked on Mahdieh's machine).
2019-11-08Minor corrections applied in software buildsMohammad Akhlaghi-2/+2
While working on a different branch to build the GNU C Library, I noticed a few places in the template that need corrections which are now applied: 1. A new-line character after the "C compiler works" notice at the start of the configure script. 2. Removing possible `::' in the `LD_LIBRARY_PATH' definition of `basic.mk'. Note that its not necessary in the other steps because we don't use any outside-defined `LD_LIBRARY_PATH'. 3. Building GMP for C++ and also with `--enable-fat'. 4. Removing the unpacked Perl tarball directory after its installation.
2019-11-06GNU Project Debugger (GDB) and Pexpect can now be builtMohammad Akhlaghi-0/+7
These two packages are necessary to build the GNU C Library.
2019-11-06Perl is now built as a basic dependency of the templateMohammad Akhlaghi-1/+0
Perl is necessary to build Texinfo and later to build LaTeX. Until now we were just using the host operating system's installation of Perl, but in some instances that Perl can be too old and not suppor the features necessary. With this commit, Perl is now built from source during the basic installation step of the template. This was reported by Idafen Santana PĂ©rez, after trying the pipeline on an Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
2019-10-30Tarballs set as order-only prerequisites, not needed for build callsMohammad Akhlaghi-64/+69
Until now, the tarballs were the first normal prerequisite of the software. As a result if their date changed, the whole software would be re-built. However, for tarballs specifically, we actually check their contents with a checksum, so their date is irrelevant (if its newer than the built program, but has the same checksum, there is no need to re-build the software). Also, calling the tarball name as an argument to the building process (for example `gbuild') was redundant. It is now automatically found from the list of order-only prerequisites within `gbuild' and `cbuild' (similar to how it was previously found in the `pybuild' for Python building). A `README.md' file has also been placed in `reproduce/software/make' to help describe the shared properties of the software building Makefiles. This will hopefully grow much larger in the future.
2019-10-29lmfit and its dependencies added, Python tarballs as prerequisiteMohammad Akhlaghi-184/+226
Python's `lmfit' module and all its major dependencies (`asteval', `corner', `emcee' and `uncertainties') have been included in the template. While doing this I noticed that if the tarballs are the last prerequisite of each software building rule, then when building in parallel, the template will immediately start building packages as soon as the first one is downloaded. Not like the current way that it will attempt to download several, then start building. For now, this has been implemented in the Python build rules for all the modules and we'll later do the same for the other programs and libraries. This also motivated a simplification of the `pybuild' function: it now internally looks into the prerequisites and selects the tarball from the prerequisite that is in the tarballs directory. This isn't a problem for the build, but I just don't understand why Python can't recognize the version of `emcee', Python reads the version of `emcee' as `0.0.0'! But it doesn't cause any crash in the build, so for now its fine.
2019-10-28HEALPix, Autoconf and Automake now in libraryMohammad Akhlaghi-0/+10
The tarball of HEALPix includes multiple languages and doesn't include the ready-to-run GNU Build System by default, we actually have to build the `./configure' script for the C/C++ libraries. So it was necessary to also include GNU Autoconf and GNU Automake as prerequisites of HEALPix. However, the official GNU Autoconf tarball (dating from 2012) doesn't build on modern systems, so I just cloned it from its source and bootstrapped it and built its modern tarball which we are using here.
2019-10-24Several more LSST pipeline dependencies are addedMohammad Akhlaghi-13/+99
The following software are added with this commit: eigency, esutil, flake8, future, galsim, lsstdesccoord, pybind11 and pyflakes.
2019-10-24APR, APR Utility, Boost and Eigen are now availableMohammad Akhlaghi-0/+1
As part of an effort to bring in all the dependencies of the LSST Science pipeline (which includes the last commit), these software are now available in the template.
2019-10-01New versions for ImageMagick, Python, Numpy Scipy and MatplotlibMohammad Akhlaghi-5/+8
It was some time since these three software were not updated! With this commit the template now uses the most recent stable release of these packages. Also, the hosting server for ImageMagick was moved to my own webpage because unfortunately ImageMagick removes its tarballs from its own version.
2019-09-06Updated versions of several softwareMohammad Akhlaghi-1/+1
New versions of astropy, bash, cmake, curl, findutils, gawk, gcc, ghostscript, git, make, gsl had recently come so they are updated with this commit. About GNU Findutils and GNU Make: I was bootstrapping (building the tarball of) these two separately separately because their standard tarball release had problems on some systems. Both have been updated now so I am no longer using my own webpage as their main URL. A special note about GNU Make. I just noticed that during bootstrapping, GNU Make would use the fixed version string of `4.2.90' for any commit!!! But fortunately they have officially released their 4.2.90 version, so we are safely using their own webpage. The only difference is the compression format. My old bootstrapped build was `tar.lz', but the standard release is `tar.gz'. Also, all the basic programs (installed in `.local/bin') in `basic.mk' are now existance-only dependencies (after a `|'). Because later programs just use them at a very basic level, so there is no need to rebuild everything when Bash gets updated for example.
2019-08-22Fixed typo in beautifulsoup4 Python package checksum nameRaul Infante-Sainz-1/+1
Until this commit, the name of the variable for `beautifulsoup4' checksum was wrong, and because of that, it was not able to install it. With this commit, `beautifulsoup-checksum' has been replaced for `beautifulsoup4-checksum' in the `reproduce/software/make/python.mk' Makefile, and the problem has been fixed. This was not noticed previously because this Python package is only installed when some high level programs are requested to be installed. With this commit the version of `imagemagick' program has been also updated because the previous version is not available in the official website anymore.
2019-08-08Corrected typo when fixing libffi's installation directoryMohammad Akhlaghi-1/+1
In the line where we checked if libffi is installed in `lib/' or `lib64/', there was a typo that lead to an incorrect result: we had forgot to add a `-f' to the second check. This is corrected with this commit.
2019-08-05Libffi builds without Java supportMohammad Akhlaghi-1/+2
Until now, we weren't explicitly disabling Java in the build of libffi because there was no Java platform on the systems we tested. But recently Yahya Sefidbakht report a crash in libffi (reported in bug #56716) because of Java not being compiled properly. Unfortunately libffi doesn't have a configure option to disable Java, but it does have an internal macro (`NO_JAVA_RAW_API'). With this commit, we we defined this macro in the `make' step, and it solved the problem. This fixes bug #56716.
2019-08-01Updated version of mpi4py doesn't conflict with OpenMPIMohammad Akhlaghi-12/+3
Until now, in version 3.0.1, mpi4py couldn't be built with the most recent version of OpenMPI. However, after trying the next version (3.0.2), I noticed that it builds successfully without a problem.
2019-07-29Checking software tarball checksums before building softwareMohammad Akhlaghi-100/+113
Until now, there was no check on the integrity of the contents of the downloaded/copied software tarballs, we only relied on the tarball name. This could be bad for reproducibility and security, for example on one server the name of a tarball may be the same but with different content. With this commit, the SHA512 checksums of all the software are stored in the newly created `checksums.mk' (similar to how the versions are stored in the `versions.mk'). The resulting variable is then defined for each software and after downloading/copying the file we check to see if the new tarball has the same checksum as the stored value. If it doesn't the script will crash with an error, informing the user of the problem. The only limitation now is a bootstrapping problem: if the host system doesn't already an `sha512sum' executable, we will not do any checksum verification until we install our `sha512sum' (as part of GNU Coreutils). All the tarballs downloaded after GNU Coreutils are built will have their checksums validated. By default almost all GNU/Linux systems will have a usable `sha512sum' (its part of GNU Coreutils after all for a long time: from the Coreutils Changelog file atleast since 2013). This completes task #15347.
2019-07-28Single wrapper instead of old ./configure, Makefile and ./for-groupMohammad Akhlaghi-2/+2
Until now, to work on a project, it was necessary to `./configure' it and build the software. Then we had to run `.local/bin/make' to run the project and do the analysis every time. If the project was a shared project between many users on a large server, it was necessary to call the `./for-group' script. This way of managing the project had a major problem: since the user directly called the lower-level `./configure' or `.local/bin/make' it was not possible to provide high-level control (for example limiting the environment variables). This was especially noticed recently with a bug that was related to environment variables (bug #56682). With this commit, this problem is solved using a single script called `project' in the top directory. To configure and build the project, users can now run these commands: $ ./project configure $ ./project make To work on the project with other users in a group these commands can be used: $ ./project configure --group=GROUPNAME $ ./project make --group=GROUPNAME The old options to both configure and make the project are still valid. Run `./project --help' to see a list. For example: $ ./project configure -e --host-cc $ ./project make -j8 The old `configure' script has been moved to `reproduce/software/bash/configure.sh' and is called by the new `./project' script. The `./project' script now just manages the options, then passes control to the `configure.sh' script. For the "make" step, it also reads the options, then calls Make. So in the lower-level nothing has changed. Only the `./project' script is now the single/direct user interface of the project. On a parallel note: as part of bug #56682, we also found out that on some macOS systems, the `DYLD_LIBRARY_PATH' environment variable has to be set to blank. This is no problem because RPATH is automatically set in macOS and the executables and libraries contain the absolute address of the libraries they should link with. But having `DYLD_LIBRARY_PATH' can conflict with some low-level system libraries and cause very hard to debug linking errors (like that reported in the bug report). This fixes bug #56682.
2019-07-04libffi always installed in the lib directoryMohammad Akhlaghi-1/+11
On some Fedora systems, libffi installs under `lib64', not `lib'. As a result, Python's Setuptools can't find it and will not built (complaining about not finding the `_ctypes' module). With this commit, we fix this problem by explicitly putting a copy of libffi's installed libraries within the `lib' directory. This issue was found while testing the pipeline with Elham Saremi and Hamed Altafi.
2019-05-24PyYAML decompressed tarball directory name fixedRaul Infante-Sainz-1/+1
Until this commit, the name of the decompressed tarball directory of PyYAML Python package was wrong. It has to be `PyYAML-version' instead of `pyyaml-version'. When I run the installation on Mac OS system it went up to the end of the installation with no error. However, when I tried to install it on a GNU/Linux system, it complained about no finding the `pyyaml-version' directory, which is the expected because the name was wrong! With this commit, I have fixed this issue by writting correctly the name of the decompressed tarball directory.
2019-05-24Added PyYAML Python package into the projectRaul Infante-Sainz-0/+12
With this commit, PyYAML Python package has been added into the project. It is widely used in the Python community and the goal is to have human readable configuration files. As in the web page (https://pypi.org/project/PyYAML/) says: YAML is a data serialization format designed for human readability and interaction with scripting languages. PyYAML is a YAML parser and emitter for Python.
2019-05-22TeXLive and Ghostscript also added as dependencies of MatplotlibMohammad Akhlaghi-0/+2
Matplotlib can optionally use LaTeX and Ghostscript as dependencies to render text with LaTeX. Since we already have their build rules, with this commit, they have been added as its prerequisites.
2019-05-21ImageMagick put as prerequisite of MatplotlibRaul Infante-Sainz-0/+1
With this commit, ImageMagick program has been set as prerequisite of Matplotlib Python package. Since some submodules of Matplotlib rely on ImageMagick programs (for example, those to make image animations), and now we have ImageMagick into the project, it is good to install ImageMagick when Matplotlib is requested to be installed.
2019-04-30Imported some recent/parallel work, conflicts fixedMohammad Akhlaghi-3/+6
Especially because of the new convention regarding backslashes, there were many conflicts that are now fixed. But none were substantial.
2019-04-30End-of-line Backslashs no longer right under each otherMohammad Akhlaghi-133/+133
When we need to quote the new-line character we end the line with a backslash (`\'). Until now, our convention has been to put all such backslashes under each other to help in visual inspection. But this causes a lot of confusion in version control: if only one line's length is larger, the whole block will be marked as changed and thus makes it hard to visually see the actual change. It also makes debuging the code (adding some temporary lines) hard. With this commit, I went through all the files and tried to fix all such cases so only a single white space character is between the last command character and the backslash. Where there was an empty line (ending with a backslash, to help in visually separating the code into blocks), I put the backslash right under the previous line's. This completes task #15259.
2019-04-29Added numpy and six as prerequisites of h5pyRaul Infante-Sainz-2/+4
Until now, we were missing `numpy' and `six' as prerequisites of `h5py'. Because we did the configure step with all cores, `numpy' and `six' allways were built before `h5py' with any crash. However, in a single thread configure run we noticed that we were missing these two dependencies. With this commit, we fix this issue by setting `numpy' and `six' as prerequisites of `h5py'.
2019-04-29Modified sip_tpv Python package prerequisitesRaul Infante-Sainz-1/+2
Until this commit, the prerequisites of `sip_tpv' were `mpmath' and `sympy'. However, the real prerequisites of `sip_tpv' are `astropy', `numpy' and `sympy'. With this commit, we fix this issue, and now `mpmath' is only a prerequisite of `sympy'.
2019-04-24Added paper citation of sip_tpv Python packageRaul Infante-Sainz-4/+6
Until now, we were not citing the paper of `sip_tpv' package. With this commit, we have been fix this issue.
2019-04-23Python package sip_tpv added into the templateRaul Infante-Sainz-0/+8
With this commit, we add `sip_tpv' Python package into the template. This is a small package to convert SIP distorsion coefficients into PV distorsion coefficients, and the other way around. This package is useful in a astronomical context, specially when `swarp' is going to be used in order to resample images. The reason is that `swarp' only can understand PV distorsion coefficients.
2019-04-23Python package SymPy added into the templateRaul Infante-Sainz-5/+5
With this commit, we add `sympy' Python package into the template. This is a package to do symbolic mathematics. The motivation is that it is a prerequisite of `sip_tpv' Python package, which is useful to convert SIP distorsion coefficients into PV coefficients (in the context of astronomical images). However, the availability of `sympy' in the template will be useful for anyone interested in this package.
2019-04-23Python package mpmath added into the templateRaul Infante-Sainz-0/+16
With this commit, we add `mpmath' Python package into the template. This package is a prerequisite of `sympy', a package to do symbolic mathematics. The motivation of adding this package is because it is a dependency of `sympy', which is more widely used into the Python science community.