| Age | Commit message (Collapse) | Author | Lines |
|---|
|
On some Fedora systems, Wget's build conflicts with libiconv.
With this commit, we use Wget's `--without-libiconv-prefix' configure
option so it will be built without an outside libiconv.
|
|
An existing `libiconv' can cause a conflict with `pkg-config', this is why
`libiconv' depends on `pkg-config'. On a clean build, `pkg-config' is built
first. But when we don't have a clean build (and `libiconv' exists) there
will be a problem.
With this commit, before re-building `pkg-config', we'll remove any
possibly existing installation of `libiconv'.
|
|
There was only a conflict with `.file-metadata'.
|
|
While reviewing Prasenjit's commits, I noticed that we had forgot to add
the citation for TIDES, also to make things clear, the program/library
build rules are now sorted alphabetically.
Finally, I noticed that after building the TiKZ PDF figures, it is crashing
(like on Prasenjit's computer). After looking around, I noticed its because
we were setting the of the `TEXINPUTS' environment variable to be the
installed TeX Live directory (which was ultimately redundant because by
default TeX will look into where it was installed). The important thing is
just that we remove any possible value the host system has, not to set new
directories.
|
|
Libiconv has to be installed before pkg-config otherwise there
would be a compilation error:
gconvert.c:61:2: error: #error GNU libiconv not in use but included
iconv.h is from libiconv
61 | #error GNU libiconv not in use but included iconv.h is from
libiconv
|
|
Several corrections were necessary in the basic build: 1) the
version of GCC on some systems includes an `_' which would cause
a crash when building the PDF. 2) libcharset had to be manually
added to the Git build.
|
|
Prasenjit Saha reported that while building on a macOS, Git complained
about not finding `libiconv' functions. Therefore with this commit,
`libiconv' is also built as a dependency of Git.
Also, since the build of Binutils (and the subsequent GCC) doesn't depend
on the exact versions of the other basic software, they are set as
existance-only prerequsites (ignoring their timestamps). This is done to
avoid re-building when it is not needed.
|
|
Until now, on GNU/Linux systems, GNU Binutils was built in parallel with
other programs. As a result, the moment that the Binutils executables (most
importantly `ld') are being installed, if another program is using them, we
can have a crash.
For some reason, this crash doesn't happen on Fedora or Arch Linux, but on
some Debian-based distors, it causes the following crash when we are
building Git (which happened to be built while Binuntils is being
installed):
credential-cache--daemon.o: file not recognized: File format not recognized
In a following run of `./configure' (when Binutils has been installed), Git
will build and install successfully.
To fix this problem, with this commit, all basic programs are now a
prerequisite of Binutils and Binutils is the sole prerequisite of GCC
(which is the final target of `basic.mk').
Also, the GCC configure options were re-ordered to be easier to read (the
`--with-*' options under each other, the `--enable-*' options under each
other and so on).
|
|
Until now we hadn't noticed that Metastore's build doesn't include an
`rpath'. As a result I got a crash during a Git commit.
With this commit, on GNU/Linux systems, we now add rpath to the installed
Metastore executable. During the build, I also cleaned up the Metastore
build recipe to be more clear and readable (in particular we only check the
user name and group name when metastore is actually built).
|
|
The recent work by Raul to import Imfit is now merged into the master
branch. Only a few minor conflicts came up due to the update with CFITSIO
(that Raul also done in parallel on this branch).
|
|
While trying to debug the installation of Imfit, we found out
that libcurl doesn't have rpath and is thus linking with the
host system's libraries. So rpath is now manually added to the
build of libcurl. We also found out that Imfit executables
don't have rpath, so it was added to them too.
|
|
In the previous commits where Metastore's recipe was updated, all the
`TAB's in the recipe were saved as spaces just before the commit (due to a
copying and pasting from the terminal, not the text editor). With this
commit, I am correcting this.
|
|
Until now, in the recipe to build Metastore, we would store the current
directory in a `current_dir' Bash variable before running `gbuild' to build
Metastore. However, in this Makefile, we aren't using `.ONESHELL'. As a
result, each un-quoted new-line character creates a new shell and the
`current_dir' variable that we used afterwards was empty!
This happened because until recently, Metastore was being built in
`high-level.mk' (where `.ONESHELL' is activated, because we are using GNU
Make to call that Makefile). But in `basic.mk', we are using the host's
Make, which may not be GNU Make, so we can't use any GNU-only features.
Also, this error was hard to notice, because we weren't using `&&' before
writing the final target of Metastore!
With this commit, both this issues are addressed: all the lines in the
recipe are now quoted in the end with a backslash, and the steps before
making the target are separated by `&&', not `;' (which doesn't cause a
crash if the command fails).
This fixes bug #56295.
|
|
Until this commit, Binutils was brough up as a GCC prerequisite two times:
Once as a special (`host_cc') dependency (for when we want to build GCC),
another time as a dependency in every build. The first one is now obsolete:
on MacOS systems where we don't build Binutils, we define its symbolic
links in the same recipe.
With this commit, we remove the first one, so Binutils is always a
dependency of GCC.
|
|
GCC 9.1 was just released and includes many new optimization features that
can benefit projects in this template also.
Also, the build directory of GCC has been moved inside the unpacked
directory (similar to all the other programs). As a result, while GCC is
being built, the `.build/software/build-tmp' directory will only have one
directory for GCC. Until now, there was one `gcc-build' directory and one
unpacked tarball.
|
|
Recently, after the installation of Coreutils, we added a step to manually
run PatchELF over all the contents of the `$(ibdir)'. However, after a
fresh test, this method failed: because while PatchELF was updating `mv',
another program that was using `mv' couldn't do so and crashed.
To fix this problem, Coreutils is now installed in a dummy directory also
and the exact files that need `rpath' are identified and PatchELF is run on
them (to be clean). Also, higher-level `basic.mk' software (higher-level
than Bash), were re-organized so they depend on Coreutils. With this, we
are no sure that when Coreutils is being built, it is the only program that
is being built and PatchELF won't interfere with any other program.
Also, OpenSSL and CMake were set to be bulit in parallel to speed up their
build.
|
|
Especially because of the new convention regarding backslashes, there were
many conflicts that are now fixed. But none were substantial.
|
|
When we need to quote the new-line character we end the line with a
backslash (`\'). Until now, our convention has been to put all such
backslashes under each other to help in visual inspection.
But this causes a lot of confusion in version control: if only one line's
length is larger, the whole block will be marked as changed and thus makes
it hard to visually see the actual change. It also makes debuging the code
(adding some temporary lines) hard.
With this commit, I went through all the files and tried to fix all such
cases so only a single white space character is between the last command
character and the backslash. Where there was an empty line (ending with a
backslash, to help in visually separating the code into blocks), I put the
backslash right under the previous line's.
This completes task #15259.
|
|
Until now, to test if GCC can use `sys/cdefs.h', we were building
a small test program using it. But after testing on an Ubuntu 14.04,
we noticed that the GCC test during the configure script passes, but
GCC still can't be built. After some investigation we noticed its
available in other directories, but during the build of GCC, those
directories aren't used, and it only assumes it to be under
`/usr/include'. So with this commit, we are only checking this
particular location for this header, not a test run of GCC.
After fixing this, we noticed that GCC's build crashed again because
it couldn't link with `libc.a' (or `libc.so'). So we also added a
for this library and added a new warning to inform the user what they
might be able to do.
Finally, we noticed that in one of the last steps of building GCC,
we weren't using `&&', but `;', so the GCC name file would be
built, even when the GCC build failed.
|
|
Even though the Coreutils configure script says that it adds `rpath' to its
executables, its executables don't have it. As a result, it goes to use the
host operating system libraries, causing failures when they don't match
with the template.
Unfortunately after some tests with the configure script, I couldn't find
any way to include `rpath'! Even though `-rpath-link' is present in all
linking commands during Coreutils' build, the installed files still don't
have it!
So I was forced to use PatchELF. However, one problem is that Coreutils
installs many programs, not just one like Bash or AWK.
As a brute-force solution, with this commit, we are running PatchELF on all
the installed programs. It won't hurt those that already have it, but it
will fix all those that don't.
With this commit, I am also making the following non-related small changes:
- In `build-rules.mk', the `&&' characters were placed at the start of the
line for better readability.
- Bash, Readline and NCURSES are now built in parallel on systems that
support it (during `basic.mk').
|
|
Until this commit, `m4' was not a prerequisite of `gmp'. However, during
a test in Ubuntu 14.04 using one single core in the configure step, it
crashed complaining about not having `m4' installed.
With this commit, we set `m4' as a prerequisite of `gmp'.
|
|
With this commit, the copyright information of some files have been
modify in order to include the work of Raul Infante-Sainz.
|
|
Until this commit, in Mac OS we were installing `binutils' as symbolic
links of various programs (`as', `ar', `ld', `nm',` ps' and `ranlib').
However, there was a missing semicolon at the end of each line. As a
consecuence, the installation of `binutils' on Mac OS systems failed.
With this commit, we fix this problem by typing a semicolon at the end
of each makelink line.
|
|
Until now we were using the official tarball of GNU Bash. However, Bash is
distributed using patches, not a public version controlled history. So to
implement newer features of Bash, its necessary to apply those patches and
make the tarball ourselves.
With this commit, we have done just that: we used the 7 patches that have
been released since version 5.0.0 and made a tarball to use for this
template. The instructions on how to make the patched tarball are also
given above the Bash build rule.
|
|
Until now, `metastore' did not depend on the necessaries programs that
we use to install it (`awk', `coreutils' and `sed'). They are not
official dependencies of `metastore', but we need them to install it.
With this commit, we put these programs as prerequisites of `metastore'
in order to be able to install it without any problem.
|
|
Until now, to specify which high-level software you want the project to
contain, it was necessary to go into the `high-level.mk' Makefile that is
complicated and can create bugs.
With this commit, a new `reproduce/software/config/installation/TARGETS.mk'
file has been created that is easily/cleanly in charge of documenting the
final high-level software that must be built for the project.
Also, until now, FFTW was set as a dependency of Numpy while we couldn't
actually get Numpy to use it! It was just there for future reference and to
justify its build rule. But now that many software won't be built and there
is no problem with having rules even though a project might not use them,
it has been removed.
|
|
Git and Metastore are very basic and fundamental tools for the template, so
to keep things clean (let the `high-level.mk' software only represent
optional software in the template), these two software (and their
dependencies: `cURL' and `Libbsd') will now be built in `basic.mk'.
|
|
Until this commit, we didn't install Binutils. However, we need `strip'
for installing Netpbm, and `strip' is part of the Binutil software.
With this commit, we include Binutils as a dependency of GCC for
GNU/Linux systems. For Mac OS systems we create a symbolic link to
`strip' just after the generation of the symbolic link to `gcc'.
|
|
Due to the copy/paste of rules from other files, in some rules there
were some spaces insteand of tab. There were also a lack of semicolon in
the building of CC, and bad extensions in various tarballs.
With this commit, all of these typos have been fixed.
|
|
Until now, we did not have CC. This is an obsolete way of calling C
Compiler, nowadays it is GCC. However, there could be some software
that is still using this convention (for example, `netpbm').
With this commit, we make the symbolic link `cc' pointing to the
installed `gcc'.
|
|
Until now, the software building and analysis steps of the pipeline were
intertwined. However, these steps (of how to build a software, and how to
use it) are logically completely independent.
Therefore with this commit, the pipeline now has a new architecture
(particularly in the `reproduce' directory) to emphasize this distinction:
The `reproduce' directory now has the two `software' and `analysis'
subdirectories and the respective parts of the previous architecture have
been broken up between these two based on their function. There is also no
more `src' directory. The `config' directory for software and analysis is
now mixed with the language-specific directories.
Also, some of the software versions were also updated after some checks
with their webpages.
This new architecture will allow much more focused work on each part of the
pipeline (to install the software and to run them for an analysis).
|
