aboutsummaryrefslogtreecommitdiff
path: root/reproduce/analysis/make
AgeCommit message (Collapse)AuthorLines
2021-01-09IMPORTANT: analysis outputs written in BDIR/analysisMohammad Akhlaghi-21/+34
Until now, the build directory contained a 'software/' directory (that hosted all the built software), a 'tex/' subdirectory for the final building of the paper, and many other directories containing intermediate/final data of the specific project. But this mixing of built software and data is against our modularity and minimal complexity principles: built software and built data are separate things and keeping them separate will enable many optimizations. With this commit, the build directory of the core Maneage branch will only contain two sub-directories: 'software/' and 'analysis/'. The 'software/' directory has the same contents as before and is not touched in this commit. However, the 'analysis/' directory is new and everything created in the './project make' phase of the project will be created inside of this directory. To facilitate easy access to these top-level built directories, two new variables are defined at the top of 'initialize.mk': 'badir', which is short for "built-analysis directory" and 'bsdir', which is short for "built-software directory". HOW TO IMPLEMENT THIS CHANGE IN YOUR PROJECT. It is easy: simply replace all occurances of '$(BDIR)' in your project's subMakefiles (except the ones below) to '$(badir)'. To confirm if everything is fine before building your project from scratch after merging, you can run the following command to see where 'BDIR' is used and confirm the only remaning cases. $ grep -r BDIR reproduce/analysis/* --> make/verify.mk: innobdir=$$(echo $$infile | sed -e's|$(BDIR)/||g'); \ --> make/initialize.mk:badir=$(BDIR)/analysis --> make/initialize.mk:bsdir=$(BDIR)/software --> make/initialize.mk: $$sys_rm -rf $(BDIR) --> make/top-prepare.mk:all: $(BDIR)/software/preparation-done.mk 'BDIR' should only be present in lines of the files above. If you see '$(BDIR)' used anywhere else, simply change it to '$(badir)'. Ofcourse, if your project assumes BDIR in other contexts, feel free to keep it, it will not conflict. If anything un-expected happens, please post a comment on the link below (you need to be registered on Savannah to post a comment): https://savannah.nongnu.org/task/?15855 One consequence of this change is that the 'analysis/' subdirectory can be optionally mounted on a separate partition. The need for this actually came up for some new users of Maneage in a Docker image. Docker can fix portability problems on systems that we haven't yet supported (even Windows!), or had a chance to fix low-level issues on. However, Docker doesn't have a GUI interface. So to see the built PDF or intermediate data, it was necessary to copy the built data to the host system after every change, which is annoying during working on a project. It would also need two copies of the source: one in the host, one in the container. All these frustrations can be fixed with this new feature. To describe this scenario, README.md now has a new section titled "Only software environment in the Docker image". It explains step-by-step how you can make a Docker image to only host the built software environment. While your project's source, software tarballs and 'BDIR/analysis' directories are on your host operating system. It has been tested before this commit and works very nicely.
2021-01-02./project make: new texclean targetMohammad Akhlaghi-1/+6
Until now there was only a 'clean' (to delete all files created during the 'make' phase) and the 'distclean' (to delete all files during configuration and make). But sometimes we don't want to delete all the files created during the full 'make' phase, we only want to delete the files that were created by LaTeX for building the paper. Witht this commit, a new target has been added for this job. You can now run the following command for this job: ./project make texclean Only the files in '$(BDIR)/tex/build' will be deleted (and the 'tikz' directory under that location is recreated, ready for a future build).
2021-01-02Copyright year updated in all source filesMohammad Akhlaghi-8/+8
Having entered 2021, it was necessary to update the copyright years at the top of the source files. We recommend that you do this for all your project-specific source files also.
2020-12-14Better warnings when maneage branch not present and PDF not builtMohammad Akhlaghi-12/+31
Until now, there was no warning when the 'maneage' branch didn't exist in the Git history. This can happen when you forget to push the 'maneage' branch to a remote for your project, and you later clone your project from that remote (for example on another computer). We use the 'maneage' branch to report the latest commit hash and date in the final paper (which can greatly help future readers). Since we check the 'maneage' branch on every run of './project make' (in 'initialize.mk') this would result in a printed statement like this: fatal: Not a valid object name maneage Also until now, the description of what to do when TeXLive wasn't installed properly wasn't complete: it didn't mention that it is necessary to delete the TeXLive target files. This could confuse users (they would re-run './project configure -e', but with no effect). With this commit, for the 'maneage' branch issue a complete warning will be printed. Telling the user what to do to get the 'maneage' branch (and thus fix this warning). Also, the LaTeX macros that go in the paper are now red when the 'maneage' branch doesn't exist, telling the user to see the printed warning (thus encouraging the user to get the branch). For the TeXLive issue, the necessary commands to run are now also printed in the warning.
2020-12-01Default paper: macros available for date of commits citedMohammad Akhlaghi-1/+5
Until now, Maneage only provided the commit hashes (of the project and Maneage) as LaTeX macros to use in your paper. However, they are too cryptic and not really human friendly (unless you have access to the Git history on a computer). With this commit, to make things easier for the readers, the date of both commits are also available as LaTeX macros for use in the paper. The date of the Maneage commit is also included in the acknowledgements. Also, the paragraph above the acknowledgements has been updated with better explanation on why adding this acknowledgement in the science papers is good/necessary.
2020-12-01IMPORTANT: organizational improvements in Maneage TeX sourcesMohammad Akhlaghi-2/+15
This only concerns the TeX sources in the default branch. In case you don't use them, there should only be a clean conflict in 'paper.tex' (that is obvious and easy to fix). Conflicts may only happen in some of the 'tex/src/preamble-*.tex' files if you have actually changed them for your project. But generally any conflict that does arise by this commit with your project branch should be very clear and easy to fix and test. In short, from now on things will even be easier: any LaTeX configuration that you want to do for your project can be done in 'tex/src/preamble-project.tex', so you don't have to worry about any other LaTeX preamble file. They are either templates (like the ones for PGFPlots and BibLaTeX) or low-level things directly related to Maneage. Until now, this distinction wasn't too clear. Here is a summary of the improvements: - Two new options to './project make': with '--highlight-new' and '--highlight-notes' it is now possible to activate highlighting on the command-line. Until now, there was a LaTeX macro for this at the start of 'paper.tex' (\highlightchanges). But changing that line would change the Git commit hash, making it hard for the readers to trust that this is the same PDF. With these two new run-time options, the printed commit hash will not changed. - paper.tex: the sentences are formatted as one sentence per line (and one line per sentence). This helps in version controlling narrative and following the changes per sentence. A description of this format (and its advantages) is also included in the default text. - The internal Maneage preambles have been modified: - 'tex/src/preamble-header.tex' and 'tex/src/preamble-style.tex' have been merged into one preamble file called 'tex/src/preamble-maneage-default-style.tex'. This helps a lot in simply removing it when you use a journal style file for example. - Things like the options to highlight parts of the text are now put in a special 'tex/src/preamble-maneage.tex'. This helps highlight that these are Maneage-specific features that are independent of the style used in the paper. - There is a new 'tex/src/preamble-project.tex' that is the place you can add your project-specific customizations.
2020-11-15Building final PDF: pdf-build-final has to be given an explicit yesMohammad Akhlaghi-10/+10
Until now, when the 'pdf-build-final' configuration variable (defined in 'reproduce/analysis/config/pdf-build.conf') was given any string a PDF would be built. This was very confusing, because people could put a 'no' and the PDF would still be built! With this commit, only when this variable has a value of 'yes' will the PDF be built. If given any other string (or no string at all), it will not produce a PDF. This issue was reported by Zahra Sharbaf.
2020-10-18Recipes for final initialize and verify targets not on stdoutMohammad Akhlaghi-4/+11
The LaTeX macro files for these two subMakefiles are created on every run of './project make'. So their commands are also printed every time and hardly ever will a normal user want to modify or change these. So to avoid populating the standard output of a Maneaged project with all these extra lines every time (possibly getting mixed with the important analysis or LaTeX outputs), an '@' has been placed at the start of the recipes. With an '@' at the start of the recipe, Make is instructed to not print the commands it wants to run in the standard output.
2020-09-24Gnuastro's analysis configuration files removedMohammad Akhlaghi-5/+2
Until now, the core Maneage branch included some configuration files for Gnuastro's programs. This was actually a remnant of the distant past when Maneage didn't actually build its own software and we had to rely on the host's software versions. This file contained the configuration files specific to Gnuastro for this project and also had a feature to avoid checking the host's own configuration files. However, we now build all our software ourselves with fixed configuration files (for the version that is being installed and its version is stored). So those extra configuration files were just extra and caused confusion and problems in some scenarios. With this commit, those extra files are now removed. Also, two small issues are also addressed in parallel with this commit: - When running './project make clean', the 'hardware-parameters.tex' macro file (which is created by './project configure' is not deleted. - The project title is now written into the default output's PDF's properties (through 'hypersetup' in 'tex/src/preamble-header.tex') through the LaTeX macro. All these issues were found and fixed with the help of Samane Raji.
2020-08-27Machine architecture and byte-order available as LaTeX macroMohammadreza Khellat-4/+5
Until now, no machine-related specifications were being documented in the workflow. This information can become helpful when observing differences in the outcome of both software and analysis segments of the workflow by others (some software may behave differently based on host machine). With this commit, the host machine's 'hardware class' and 'byte-order' are collected and now available as LaTeX macros for the authors to use in the paper. Currently it is placed in the acknowledgments, right after mentioning the Maneage commit. Furthermore, the project and configuration scripts are now capable of dealing with input directory names that have SPACE (and other special characters) by putting them inside double-quotes. However, having spaces and metacharacters in the address of the build directory could cause build/install failure for some software source files which are beyond the control of Maneage. So we now check the user's given build directory string, and if the string has any '@', '#', '$', '%', '^', '&', '*', '(', ')', '+', ';', and ' ' (SPACE), it will ask the user to provide a different directory.
2020-08-02initialize.mk: accounting for no maneage branchBoud Roukema-3/+8
One of the LaTeX macros reported by 'initialize.mk' is the git commit hash of the most recent 'maneage' branch that the project has been branched from. However, not all projects will retain the maneage reference. This can happen for example when people don't push the 'maneage' reference to their repository and then clone from their own repository to a second computer. Therefore, until now, in such situations, Maneage would break with an error. With this commit, in such scenarios, a place holder string is used instead, clearly highlighting that there is no 'maneage' reference.
2020-07-21Printing location when downloaded input data checksum is differentBoud Roukema-0/+1
There are many different directory trees involved in Maneage system: the top directory, the 'reproduce/' directory and its sub-directories, '.build/' (that point to a user-defined build area), and a possibly user-defined input directory. Until now, in the case of a download checksum failure, it was not immediately obvious [1] to the user *where* the file with a failed checksum is. To clarify to the user *where* the suspicious file is now located, this commit adds a line to 'reproduce/analysis/make/download.mk' to print out this full path location: '$$unchecked' along with the expected and calculated checksums. [1] Euphemism for me spending lots of time debugging and being confused.
2020-07-20README-hacking.md: clarify Zenodo usage in publication checklistBoud Roukema-2/+2
This commit clarifies the initial usage of Zenodo for reserving a Zenodo identifier and starting an 'unpublished' upload. Some other minor wording changes are done here.
2020-07-20make dist: only archive files that are under version controlBoud Roukema-17/+31
Until this commit, the '$(project-package-contents)' rules in 'reproduce/analysis/make/initialize.mk' included a line to provide all contents, recursively, of the directory 'reproduce/' in the package for further distribution. This could potentially lead to the distribution of private working files that are used during development and not intended for general distribution. With this commit, only those files in 'reproduce/' and 'tex/src' that are under version control are copied to the temporary directory (that is later used for creating an archive). With this change, the archiving commands actually became more clean (we don't have to manually remove 'LOCAL.conf' or other temporary files). Extensive comments have also been added above each step to clarify each step's purpose and method.
2020-07-07Project distribution tarball can account for no PDFs in tex/tikzMohammad Akhlaghi-1/+6
Until now the './project make dist' command implicitly assumed that the 'tex/tikz' directory always contains PDF files (because of the 'cp tex/tikz/*.pdf $$dir/tex/tikz' line). This was annoying for projects that don't use TiKZ or PGFPlots to generate their plots, and they had to manually comment this line. With this commit a check has been placed to see if any PDF files exist in there at all. If there aren't PDF files, the 'cp' command above is ignored.
2020-07-05Removing possibly existing paper.bbl before remaking itMohammad Akhlaghi-0/+6
Until now, when the bibliography file ('paper.bbl') had a LaTeX-related error (for example the journal name was a LaTeX macro that isn't defined), the first 'pdflatex' command that is run before 'biber' would crash, not allowing the project to reach 'biber'. So the user would have to manually remove 'paper.bbl' before running './project make'. With this commit, we remove any possibly existing 'paper.bbl' file before rebuilding it. Generally, this also helps in keeping things clean during the generation of the new bibliography. This bug was found by Mahdieh Nabavi.
2020-07-04Commit hash of Maneage branch used to build project as LaTeX macroMohammad Akhlaghi-0/+6
To help in the documentation, the Git hash of the Maneage branch commit that the project has most recently merged with (or branched from) is now also provided as a LaTeX macro ('\maneageversion'). It is calculated in 'reproduce/analysis/make/initialize.mk' (in the recipe to 'initialize.tex').
2020-07-04Better names and comments in INPUTS.confMohammad Akhlaghi-8/+9
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this very alien to anyone that is not familiar with the history of the Hubble Space Telescope (the camera is no longer used! Its just used here since its one of the standard FITS files from the FITS standard webpage). With this commit the variable names have been modified to be more readable and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf' (describing the purpose of each variable) were edited and made more clear.
2020-06-30The distclean target accounts for non-existance of git hooksMohammad Akhlaghi-1/+1
Until now, when the user wanted to complete remove all built files (including software), the './project make distclean' command would fail if the git hooks weren't installed. They are present when the project's configuration has been successfully finished, but this bug can happen when trying to re-do an incomplete build. With this commit, this is fixed by adding an '-f' has been added before the 'rm' command for the Git hooks.
2020-06-19Removing preparation-done.mk when cleaning by ./project make cleanRaul Infante-Sainz-0/+1
Until this commit, the file `BDIR/software/preparation-done.mk' were not removed when cleaning the project with `./project make clean'. This file is generated in the preparation of the data during the analysis step. However, the cleaning is expected to remove anything generated in the analysis process! Step by step, with the commands: ./project make ---> Will make the preparation and analysis ./project make clean ---> Will remove all analysis outputs (but not `preparation-done.mk') ./project make ---> Won't do the preparation, only analysis! However, in the last step it should do the preparation again, because the input data could have change for any reason. With this commit, the file `BDIR/software/preparation-done.mk' is removed when cleaning the project, and consequently, in the analysis step the input data is prepared.
2020-06-17Security risk of LaTeX's -shell-escape option explained in commentBoud Roukema-0/+9
The 'pdflatex' program is used to build the default Maneage-branch paper. But since the default paper uses PGFPlots to build the figures within LaTeX as an external PDF, PGFPlots requires 'pdflatex' to be called with the '-shell-escape' option. Generally, this option can be considered as a security risk (in particular when 'pdflatex' is being run by an external LaTeX file: a malicious LaTeX writer may embed commands in the LaTeX source that will be executed on the host if this option is present). This is not too serious of an issue in Maneage, because when someone runs Maneage, they intentionally let it run many on their system. Hence if someone wants to exploit a host system, they can add the necessary commands long before 'pdflatex' is run. After all, all commands in Maneage are run with the calling user's permissions, hence they have access to many parts of the user's accounts. If someone is worried about security on a non-trusted Maneage project they should act the same as they do with any software: define a new user for it, and call it with that user (as a weak-level security), or run it in a virtual machine or container. However, since this option has been explicity mentioned as a security risk before, it helps if we have a comment explaining its usage in 'paper.mk'. With this commit, the concerned user will read a brief explanation and can read the brief discussion at [1] and possibly re-open the discussion or propose ways of mitigating the security risk(s). [1] https://savannah.nongnu.org/task/?15694
2020-06-17New target --dist-software to package all necessary software tarballsMohammad Akhlaghi-6/+2
When publishing a project, it is necessary to also publish the source code of all necessary software of the project. We had recently added a new './project make' target called 'dist-software' for this job, but had forgotten to add it in the output of './project --help'! There was also a small bug inside of it that didn't allow the successful copying of the created tarball to the top project directory. With this commit, an explanation for this target has been added in the output of './project --help' and that bug has been fixed.
2020-06-10IMPORTANT: bug fix in default data download script of download.mkMohammad Akhlaghi-11/+15
Summary of possible semantic conflicts 1. The recipe to download input datasets has been modified. You have to re-set the old 'origname' variable to 'localname' (to avoid confusion) and the default dataset URL should now be complete (including the actual filename). See the newly added descriptions in 'INPUTS.conf' for more on this. Until now, when the dataset was already present on the host system, a link couldn't be made to it, causing the project to crash in the checksum phase. This has been fixed with properly naming the main variable as 'localname' to avoid the confusion that caused it. Some other problems have been fixed in this recipe in the meantime: - When the checksum is different, the expected and calculated checksums are printed. - In the default paper, we now print the full URL of the dataset, not just the server, so the checksum of the 'download.tex' step has been updated.
2020-06-09Minor edit printing arXiv URL in plain text metadataMohammad Akhlaghi-1/+1
Until now, in the 'print-copyright' function of 'initialize.mk' (that prints a fixed set of common meta necessary in plain-text files), we were simply printing this line: # Pre-print server: arXiv:1234.56789 But given that all the other elements are click-able URLs, it now prints: # Pre-print server: https://arxiv.org/abs/1234.56789
2020-06-06IMPORTANT: Added publication checklist, improved relevant infrastructureMohammad Akhlaghi-66/+216
Possible semantic conflicts (that may not show up as Git conflicts but may cause a crash in your project after the merge): 1) The project title (and other basic metadata) should be set in 'reproduce/analysis/conf/metadata.conf'. Please include this file in your merge (if it is ignored because of '.gitattributes'!). 2) Consider importing the changes in 'initialize.mk' and 'verify.mk' (if you have added all analysis Makefiles to the '.gitattributes' file (thus not merging any change in them with your branch). For example with this command: git diff master...maneage -- reproduce/analysis/make/initialize.mk 3) The old 'verify-txt-no-comments-leading-space' function has been replaced by 'verify-txt-no-comments-no-space'. The new function will also remove all white-space characters between the columns (not just white space characters at the start of the line). Thus the resulting check won't involve spacing between columns. A common set of steps are always necessary to prepare a project for publication. Until now, we would simply look at previous submissions and try to follow them, but that was prone to errors and could cause confusion. The internal infrastructure also didn't have some useful features to make good publication possible. Now that the submission of a paper fully devoted to the founding criteria of Maneage is complete (arXiv:2006.03018), it was time to formalize the necessary steps for easier submission of a project using Maneage and implement some low-level features that can make things easier. With this commit a first draft of the publication checklist has been added to 'README-hacking.md', it was tested in the submission of arXiv:2006.03018 and zenodo.3872248. To help guide users on implementing the good practices for output datasets, the outputs of the default project shown in the paper now use the new features). After reading the checklist, please inspect these. Some other relevant changes in this commit: - The publication involves a copy of the necessary software tarballs. Hence a new target ('dist-software') was also added to package all the project's software tarballs in one tarball for easy distribution. - A new 'dist-lzip' target has been defined for those who want to distribute an Lzip-compressed tarball. - The '\includetikz' LaTeX macro now has a second argument to allow configuring the '\includegraphics' call when the plot should not be built, but just imported.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-65/+89
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf
2020-04-26Corrected Gnuastro configuration directory in initialize.mkZahra Sharbaf-1/+1
Recently (in Commit 8eb0892e) the Gnuastro configuration files moved under "reproduce/analysis/config/gnuastro" directory (before that they were in `reproduce/software/config/gnuastro)'. But this hadn't been reflected in it the variable that defines this directory in `initialize.mk'. With this commit, the address of the Gnuastro configuration files directory is corrected, allowing Gnuastro programs to operate properly when it is used.
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-83/+65
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-4/+4
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-04-13Configure (TeXLive): Year of distribution no longer in directoryMohammad Akhlaghi-1/+1
It is this time of year again: TeXLive has transitioned to its 2020 release and the year is imprinted into the installation directory of TeXLive. Until now, we have had to manually change this year and it caused complications and was very annoying. With this commit, the explicit year has been removed from TeXLive's installation and we now simply put a `maneage' instead of the year. I tried this on another system and it worked nicely. Until the time that we can fully install LaTeX packages from source tarballs, this is the best thing we could do for now.
2020-02-29IMPORTANT: re-preparation can only be done with --prepare-redoMohammad Akhlaghi-13/+2
Until now, the preparation phase was always executed before the final build phase when running `./project make'. But when it becomes necessary, project preparation can be slow and will un-necessarily slow down the project while the project is growing (focus is on the analysis that is done after preparation). With this commit, preparation will be done automatically the first time that the project is run (`.build/software/preparation-done.mk' doesn't exist). However, after preperation is complete once, future runs of `./project make' won't do preparation any more (by calling `top-prepare.mk'). They will directly call `top-make.mk' for the analysis. To manually invoke preparation after the first attempt, the `./project make' script should be run with the new `--prepare-redo' option. Also, since the preparation phase is now automatically done before the analysis phase, the long notice that describes running `./project make' at the end of the preparation phase has been removed in `top-prepare.mk'. It now just prints a short line, saying the preparation has been complete. Finally, when the project has not been run with the proper group configuration, it ends with an `exit 1' so the main `./project' script doesn't proceed any further.
2020-02-20Preparation phase: prepare.tex not needed to finish preparationMohammad Akhlaghi-1/+3
Until now, the final preparation target of the preparation phase depended on all the `$(makesrc)' files. This caused a problem because we were telling it to also depend on `prepare.tex' (which is the same file that is being built). With this commit, we are applying the same solution we have already done in `paper.mk' (for `paper.tex'): we are removing `prepare' from the list of prerequisites. This bug was found by Zahra Sharbaf.
2020-02-01IMPORTANT: reproduce/software/bash renamed to reproduce/software/shellMohammad Akhlaghi-2/+2
Until now the shell scripts in the software building phase were in the `reproduce/software/bash' directory. But given our recent change to a POSIX-only start, the `configure.sh' shell script (which is the main component of this directory) is no longer written with Bash. With this commit, to fix that problem, that directory's name has been changed to `reproduce/software/shell'.
2020-01-31Configure step: compiler checks done before basic settingsMohammad Akhlaghi-0/+6
Until now, the project would first ask for the basic directories, then it would start testing the compiler. But that was problematic because the build directory can come from a previous setting (with `./project configure -e'). Also, it could confuse users to first ask for details, then suddently tell them that you don't have a working C library! We also need to store the CPATH variable in the `LOCAL.conf' because in some cases, the compiler won't work without it. With this commit, the compiler checking has been moved at the start of the configure script. Instead of putting the test program in the build directory, we now make a temporary hidden directory in the source directory and delete that directory as soon as the tests are done. In the process, I also noticed that the copyright year of the two hidden files weren't updated and corrected them.
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-18/+20
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-18README-hacking.md: edits and corrections for easier customizationMohammad Akhlaghi-2/+2
The checklist descriptions were slightly edited to be more clear. Also, while following them, I noticed that while removing the "delete-me" parts on `verify.mk', would cause an error: the `if [ $$m == delete-me ];' statement we were saying to delete cause an error because `elif' was the first statement Bash would see. So with this commit, the `download' conditional (which isn't instructed to be deleted) was set to be the top (with an `if') and the `delete-me' conditional now has an `elif'.
2020-01-01Verification function checks if file existsMohammad Akhlaghi-3/+13
Until now, if the file to be verified didn't exist, a different checksum would be generated, and it would stop, but it wasn't immediately clear if the differing checksum is because the file doesn't exist at all! With this commit, before calculating the checksum, we first make sure if the file exists. If it doesn't exist an explicit error is printed and thus will help the project editor to find the cause of the problem.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-22/+143
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-7/+7
Now that its 2020, its necessary to include this year in the copyright statements.
2019-11-29Download links directly to actual file if it exists in INDIRMohammad Akhlaghi-2/+8
Until now, when an input dataset already exists in `INDIR', the template would just make a symbolic link to it in the build directory. However, in many cases, the files in INDIR will actually be links to other locations on the filesystem and some programs have problems following too many links. With this commit, the template is now using the `readlink' program (part of GNU Coreutils) to follow a possible link and point the link in the build directory directly to an actual non-link file.
2019-10-31Minor corrections in distribution and autoconf prerequisite of automakeMohammad Akhlaghi-0/+1
Some minor corrections were made in the template: - When making the distribution, `.swp' files (created by Vim) are also removed. - Autoconf is set as a prerequisite of Automake I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball needs some patches, so I have just left it half done until someone actually needs it and we apply the patch.
2019-10-19Minor improvments in packaging of project with make distMohammad Akhlaghi-12/+14
The steps to package the project have been made slightly more clear and also the temporary directory that is created for packaging is deleted after the tarball is made.
2019-10-11Properly working make clean when in group modeMohammad Akhlaghi-3/+4
Until now, when you ran `make clean', all the directories under `$(BDIR)/tex/' would be deleted except for `macros' and `build'. This was good for the single-user mode. But in group mode, this would delete the user-specific TeX build directory because its called `build-USER', not `build'. With this commit, to fix the problem, we define the new `texbtopdir' and based on the group condition, and use that to specify which directory to not delete.
2019-10-01Minor corrections in configure and prepare phaseMohammad Akhlaghi-10/+10
Since ImageMagick can take long to build, we are now building it in parallel. Also, the part where we replace an `_' with `\_' in the software version at the end of the configure script was removed. It is more clear/readable that the actual rule that includes such a name deals with the underline (as is the case for `sip_tpv' which already dealt with it). Finally, I noticed that the checks at the start of `top-prepare' were missing new-lines. I had forgot that the Make single-shell variable isn't activated in this stage yet.
2019-10-01Infrastructure to keep preparation resultsMohammad Akhlaghi-17/+50
A special directory is now defined in `initialize.mk' that can be used in both the preparation and build phases. Also, the contents of prepared results can now be conditionally read during `./project make'.
2019-10-01Preparation phase added before final buildingMohammad Akhlaghi-0/+126
In many real-world scenarios, `./project make' can really benefit from having some basic information about the data before being run. For example when quering a server. If we know how many datasets were downloaded and their general properties, it can greatly optmize the process when we are designing the solution to be run in `./project make'. Therefore with this commit, a new phase has been added to the template's design: `./project prepare'. In the raw template this is empty, because the simple analysis done in the template doesn't warrant it. But everything is ready for projects using the template to add preparation phases prior to the analysis.
2019-09-26Working project when downloaded from arXivMohammad Akhlaghi-2/+4
Until now, we were assuming that the users would just clone the project in Git. But after submitting arXiv:1909.11230, and trying to build directly from the arXiv source, I noticed several problems that wouldn't allow users to build it automatically. So I tried the build step by step and was able to find a fix for the several issues that came up. The scripting parts of the fix were primarily related to the fact that the unpacked arXiv tarball isn't under version control, so some checks had to be put there. Also, we wanted to make it easy to remove the extra files, so an extra `--clean-texdit' option was added to `./project'. Finally, some manual corrections were necessary (prior to running `./project', which are now described in `README.md'. Most of the later steps can be automated and we should do it later, I just don't have enough time now.
2019-09-25Won't copy previous distribution builds in new distributionMohammad Akhlaghi-1/+1
Until now, the pipeline was instructed to only ignore the current temporary project distribution directory. So if there were directories from previous builds, they were wrongly included in the current tarball. With this commit, we don't just ignore the directory of the current distribution, but generally, all directories starting with `paper-v*'.
2019-09-16Git checksum printed even when on a tagMohammad Akhlaghi-2/+2
Until now, when the commit was tagged, `git describe' would just print the tag and no longer the commit checksum. This is bad because the checksum is a much more robust way to confirm the point in history. With this commit the `--long' option has been added to `git describe' to fix this issue. From now on, when we are on a tag, it will print the tag followed by a `-0-' and the first characters of the checksum.
2019-09-16Distribution tarball now builds in arXivMohammad Akhlaghi-8/+25
`./project make dist' will package all the LaTeX-specific files (and analysis source files) into one `tar.gz' file that is ready to upload to servers like arXiv. However, it wasn't updated for some time, so running it would complain about not having a `configure' script in the top of the project. With this commit, it now works with the new file-structure of the project and also copies all the BibLaTeX source files and `paper.bbl' into the top tarball directory, which allows arXiv to build the paper as intended. The output of `./project make dist' has been uploaded and tested on arXiv and it is built by arXiv perfectly. Also, a short description of all the special `make' targets was added to the output of `./project --help'.