aboutsummaryrefslogtreecommitdiff
path: root/README.md
AgeCommit message (Collapse)AuthorLines
2018-03-14Some further minor edits to new parts of README.mdMohammad Akhlaghi-14/+16
Going through the text, some further minor edits were made.
2018-03-14Minor edits in README.mdMohammad Akhlaghi-6/+9
Some minor edits to the newly added parts of `README.md'.
2018-03-14Added future plans (and Nix/Guix usage) in README.mdMohammad Akhlaghi-4/+51
A section was added to `README.md' for describing possible future steps that we can take to make this pipeline even more robust. In it, I added a first interesting thing that I think would be really exciting to add, but I don't have time to do now.
2018-03-13Updated link to slidesMohammad Akhlaghi-1/+1
The link to the slides describing the context was the old address (which still works, but is just a symbolic link to the new address). It was thus corrected to point to the proper filename.
2018-03-09Corrected name to new repository addressMohammad Akhlaghi-3/+3
The main online repository name has been changed to `reproducible-paper' from `reproduction-pipeline-template'. So the cloning command in `README.md' had to be corrected.
2018-03-09Minor edits in README.mdMohammad Akhlaghi-5/+6
Some minor corrections were made regarding the output repository.
2018-03-09Minor typo corrected in link in README.mdMohammad Akhlaghi-2/+2
The markup for the link to the final PDF in the `README.md' file was mistakenly written and is now corrected.
2018-03-09Added description of output templateMohammad Akhlaghi-10/+15
A template was made to keep the output of this pipeline as a demonstration and it is now added to the description in `README.md'.
2018-03-09Added tip for pipeline outputsMohammad Akhlaghi-3/+22
While doing my own project (which has grown to a processing time of about half an hour), I felt that it would be very convenient to a record of the outputs at major points also. But we don't want to bloat the pipeline by commiting PDF files or large datasets that get fully changed and are just by-products. So it occurred to me to have a separate pipeline only for outputs and after trying it out, it indeed seemds to be a good solution.
2018-03-04Edits in README.mdMohammad Akhlaghi-10/+9
Some futher edits were made to the paragraph describing the contents of `README.md' for a smoother reading.
2018-03-04Minor correction in README.mdMohammad Akhlaghi-7/+8
After the last commit, another minor correction is implemeneted to further simplify the reading.
2018-03-04Minor edits in README.mdMohammad Akhlaghi-51/+70
I reviewed the first few sections of `README.md' and made some small corrections to make it easier to understand/read.
2018-03-02Small edit in README.mdMohammad Akhlaghi-2/+1
A small edit was made at the start of `README.md' to make it easier to read.
2018-02-28Header for pages, new font and author managementMohammad Akhlaghi-2/+5
The computer modern font that was designed by Donald Knuth and is the default of LaTeX is indeed a very good, elegant and nice font in print. However, most journals choose the roman fonts and thus the computer modern font doesn't (subjectively) fit into the journal format nicely. So the default font of this pipeline's paper now uses LaTeX's `newtx' package for a roman style font. Also, a set of preamble settings were added to allow headers in the pages of the paper to make the result resemble more like a journal paper (familiar to the eye), while also adding important information. A new header was made for this job. This new header now also contains the title and author settings (after all, these are also a type of header). Finally, the LaTeX `authblk' package was used to organize authors and their affiliations.
2018-02-27Minor edits in README.mdMohammad Akhlaghi-4/+4
A few minor corrections were made in `README.md'.
2018-02-27Default PDF now uses PGFPlots and BibLaTeXMohammad Akhlaghi-16/+106
Making plots and including references are integral parts of a scientific paper. Therefore to demonstrate how cleanly they can be used within the pipeline, they are now used to produce the final PDF. To use PGFPlots a random dataset is made (using AWK's random function) and is plotted using PGFPlots. The minimum and maximum values of the dataset are also included in the text to further show how such calculations can go into the macros and text. For the references, the NoiseChisel paper was added as a reference to cite when using this pipeline along with the MUSE UDF paper I, which uses this pipeline for two sections. Following this discussion, citation is also discussed in `README.md` and the NoiseChisel paper is also added as a published work with a reproduction pipeline.
2018-02-27Copyrights and TeX management made more clearMohammad Akhlaghi-4/+13
Until now, the copyright statement was left empty for the users of the pipeline to fill. However, the files have already been created and have an author (or contributing authors) before the user starts using the pipeline. So the original authors of the files are added along with the year. The user can add their own name to the existing files under the "Contributing author" when they start and they will be the "Original author" of the new files they create. Several changes were also made to the TeX management: - LaTeX is run within a `reproduce/build/tex/build' directory now. Not in the top reproduction pipeline directory. This helps keep all the auxiliary TeX files and directories in that directory and keep the top reproduction pipeline directory clean. After the final PDF is built, a copy is put in the top reproduction pipeline directory for easy viewing. - The PGFPlots preamble was also made more useful, allowing the name of the `.tex' file to also be the name of the final plot that is produced. This is a GREAT feature, because without it, the TiKZ externalization would be based on order of the plots within the paper. But now, order is irrelevant and we can even delete the TiKZ files within the processing workhorse-Makefiles so the plots are definitly rebuilt on the next run. - The paper is now in a two-column format to be more similar to published papers. A tip on debugging Make was added to `README.md'.
2018-02-26Typo corrected and minor edit in README.mdMohammad Akhlaghi-8/+8
A typo (" ... followed b checklist ...") was found and corrected in `README.md'. Also, after re-reading the paragraph, it was made slightly more clear with some minor edits in the text.
2018-02-20Added link to slides on this conceptMohammad Akhlaghi-1/+3
I had made some slides for a talk here at Lyon Observatory a little over a week ago and I thought it may be useful to add them in the `README.md' file to help demonstrate the general concept before having to read such long texts. Later, we should be adding some figures to this `README.md' file to make it more easier to understand.
2018-02-20Minor edits in design summary of README.mdMohammad Akhlaghi-11/+12
The points were made more clear.
2018-02-20Minor corrections and edits made in README.mdMohammad Akhlaghi-47/+92
The published works using the pipeline now have a separate section for them selves in the introduction and some of the explanation was made more clear.
2018-02-20Pipeline architecture described in README.mdMohammad Akhlaghi-3/+108
`README.md' didn't contain a general description of the pipeline's design architecture. So a few paragraphs have been added to help someone new to it to understand it better.
2018-02-20Necessary programs checked at configure timeMohammad Akhlaghi-7/+31
The mandatory and optional (for example downloader) dependencies are now checked at configure time so users can know what they may be missing before the processing starts. Since its recommended to be run in parallel, it can be hard to find what you are missing after running the pipeline. As part of these checks, the program to use for downloading is now also set at configure time, it is only used as a pre-defined (in `LOCAL.mk') variable during Make's processing. A small title was also added to discus the pipeline architecture that will be filled in the next commit.
2018-02-19Minor edits in README.mdMohammad Akhlaghi-9/+18
A few other minor corrections were applied to the text to be more clear.
2018-02-19Minor edits in README.mdMohammad Akhlaghi-10/+12
Some minor edits and a spellcheck were made in the text to make it easier to understand/read.
2018-02-19Added tips section on version control with taggingMohammad Akhlaghi-8/+37
In the "Tips" section of `README.md', a section on version control was added and a first tip regarding tags was added to guide (new) users on how to effectively define and use tags. As a result, in the checklist, adding a `v0' tag is now also suggested. Some minor typos were also fixed.
2018-02-15Gnuastro's memory mapping is now a local variableMohammad Akhlaghi-8/+14
As described in the commens above `MINMAPSIZE' of `LOCAL.mk.in', the amount of memory to map to HDD/SSD or keep in RAM is a local issue and not relevant to the pipeline's results. So it is now defined in a `gnuastro-local.conf' file. To keep the Makefiles clean, this file is created by the `./configure' script. To do this cleanly, the `./configure' script was also almost fully re-written with better functionality now.
2018-02-14Sanity checks added, local settings now in LOCAL.mk.inMohammad Akhlaghi-18/+18
The choice of whether or not to make a PDF is now also a local system issue, not a general pipeline issue. So it has been put in the new `LOCAL.mk.in' file which replaces the old `DIRECTORIES.mk.in'. All local settings (things that when changed should not be version-controlled) should be defined in this file. A sanity check was added to find if `./configure' has been run before `make' or not (using the `LOCAL.mk' file which is an output of the configuration step). If `LOCAL.mk' doesn't exist, an error will be printed informing the user that `./configure' needs to be run first. The configure script also provides more clear and hopefully better information on its purpose and what must be done. Since `make clean', it is executed even when `./configure' hasn't been run, it will only delete the build directory and its contents when local configuration has been done. A `distclean' target was also added which will first "clean" the pipeline, then delete the `LOCAL.mk.in' file. To allow rules like `make' to be run even if `BDIR' isn't defined (`./configure' hasn't been run yet), a fake `BDIR' is defined in such cases.
2018-02-10Minor typo corrections in README.mdMohammad Akhlaghi-21/+22
While going over parts of the text, some minor typos were found and corrected.
2018-02-10Corrected tips title to be more clearMohammad Akhlaghi-6/+6
The title "Tips on using the pipeline" was a little generic and could be confused with people who want to reproduce the result, not the designers of the pipeline. So it was changed to "Tips on expanding this template (designing your pipeline)". Some minor edits were also made to its first paragraph.
2018-02-08Minor typos corrected in README.mdMohammad Akhlaghi-70/+75
Some minor typos were found and corrected. In other cases, the text was slightly edited to be more clear.
2018-02-08Instructions to delete README.md before startingMohammad Akhlaghi-0/+5
`README.md' is for this pipeline, not the research project that is using it. Therefore it might be confused with the `README' that is devoted to the research project. So in the checklist, a point was added to delete this file before making the first new commit.
2018-02-08Basic titles now corrected after copyright in README.mdMohammad Akhlaghi-18/+16
The basic title, short description and author section of the checklist was moved immediately after copyright because it is more related to it. The description of Gnuastro is now before `README' because the user will confront Gnuastro in `README' and this will provide a good introduction on what to do with it.
2018-02-08Moved creation of a new Git repo to the end of the checklistMohammad Akhlaghi-23/+30
The creation of a new Git repo is now moved to the end of the checklist. It was not in place as the third step before. Now, the user makes all the standard changes and just before they start going into the details of their research, they define their new repository.
2018-02-08Minor edits in README.mdMohammad Akhlaghi-4/+7
The description of adding a title and authors was made slightly more clear.
2018-02-08Adding title and description also mentioned in README.mdMohammad Akhlaghi-1/+22
The first commit didn't have an explanation on correcting the title of the project in the final PDF or the top-level Makefile, so a pointer was added to the list. Also, some extra dependencies were removed from `README' and its paragraphs were scaled to the new width of 75 characters that is defined in `.dir-locals.el' (for Emacs settings, taken from Gnuastro).
2018-02-07First commit to the reproduction pipeline templateMohammad Akhlaghi-0/+400
Let's start working on this pipeline independently with this first commit. It is based on my previous experiences, but I had never made a skeleton of a pipeline before, it was always within a working analysis. But now that the pipeline has a separate repository for its self, we will be able to work on it and use it as a base for future work and modify it to make it even better. Hopefully in time (and with the help of others), it will grow and become much more robust and useful.