aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-525/+447
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-04-18Properly adding libiconv to the libraries that libstdc++ links withMohammad Akhlaghi-1/+4
Of the GCC dynamically linked libraries we need to manually add RPATH to all and for `libstdc++' we also need to tell it to link with `libiconv'. Until now, the conditional to check for libstdc++ was not working and thus libiconv wasn't been added to it. With this commit the conditional has been corrected and is now working. Also, to help in reading the logs, an echo statement was added after every call to PatchELF.
2020-04-17Replaced name of directory under akhlaghi.org as backup serverMohammad Akhlaghi-17/+17
Until now, when a the raw tarball of some software wasn't usable, I would put it under my own webpage, or `akhlaghi.org/reproduce-software'. That same address was also used as a backup server. However, now the project has a proper name: Maneage. So I changed the directory on my own server to `akhlaghi.org/maneage-software'. With this commit, this new address has replaced the old one. But to avoid crashes in projects that haven't yet merged with the main Maneage branch, the old `reproduce-software' still works (its actually a symbolic link to the new directory now).
2020-04-17Removed confusing comment in configure.sh, and extra variableMohammad Akhlaghi-12/+2
In the previous commit, we remove the `-static' flag from building PatchELF because it wasn't necessary any more. Howver, the comment for the check still included it and could be confusing. This is corrected with this commit. Also, we don't need the `good_static_libc' variable (that was only defined to pass onto PatchELF). This has also been corrected.
2020-04-17Patchelf is now built dynamicallyMohammad Akhlaghi-11/+2
Until a few commits ago, PatchELF was built statically because it was used to patch `libstdc++' at the end of the GCC building phase, but PatchELF also depends on `libstdc++', so it would crash. However, recently when patching the GCC libraries, we don't directly apply Patchelf to the library, first we copy it to a temporary place, do the patching, then put it in its proper place. So the problem above won't happen any more. With this commit, I am thus removing the static flag from patchelf and letting it built dynamically all the time. The main problem was that some systems don't have a static C++ library, so PatchELF couldn't be built statically. Instead of adding more checks, we just fixed the core foundation of the problem.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-61/+60
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-04-13Configure (TeXLive): year correction also in high-level packagesMohammad Akhlaghi-1/+1
In the previous commit, I removed the year from the basic installation of TeXLive packages, but I forgot to correct this in the high-level TeXLive packages! This is corrected with this commit.
2020-04-13Configure (TeXLive): Year of distribution no longer in directoryMohammad Akhlaghi-13/+11
It is this time of year again: TeXLive has transitioned to its 2020 release and the year is imprinted into the installation directory of TeXLive. Until now, we have had to manually change this year and it caused complications and was very annoying. With this commit, the explicit year has been removed from TeXLive's installation and we now simply put a `maneage' instead of the year. I tried this on another system and it worked nicely. Until the time that we can fully install LaTeX packages from source tarballs, this is the best thing we could do for now.
2020-04-12Configure (numpy): added --std=c99 to CFLAGS to fix errorMohammad Akhlaghi-0/+1
Elham Saremi recently reported the following errors when building Numpy in numpy/core/src/npysort/radixsort.c.src: "error: 'for' loop initial declarations are only allowed in C99 or C11 mode". After some searching, I found Issue 14147[1] on Numpy's main repository about the same problem. As described there, apparently Numpy needs C99 compiler, but doesn't check for it or set it manually (for some strange reason, leaving it to the packagers to check if they want!!!). Any way, after a check with Elham, we were able to fix it by adding the `--std=c99' to CFLAGS of Numpy's build and with this commit, it is now being implemented in the core Maneage to not cause a problem in any other project. [1] https://github.com/numpy/numpy/issues/14147
2020-04-06Astropy now depending on the Expat library to fix internal conflictRaul Infante-Sainz-10/+26
Until now, Astropy was instructed to build its own internal copy of the Expat library. However, with the recent commits before, Maneage now includes an installation of Expat and Astropy can't keep the two (its internal version and the project's version) separate, so they conflict and don't let Astropy get built. With this commit, the problem is fixed by setting the Expat library as an explicit dependency of Astropy and asking Astropy to ignore its internal copy. While doing this, I recognized that it is much easier and elegant to add steps in various stages of the `pybuild' function through hooks instead of variables. So the fifth argument of the `pybuild' function was removed and now it actually checks if hooks are defined as functions and if so, they will be called. The `pyhook_after' function was also implemented in the installation of `pybind11' (which needed it, given that the 5th argument of `pybuild' was removed) and after doing a test-build, I noticed that two lines were not ending with a `\' in `boost' (a dependency of `pybind11'). Commit written originally by Mohammad Akghlaghi
2020-04-05Commenting version numbers with an underscore for LaTeXRaul Infante-Sainz-1/+3
Until now we would simply return the version numbers as they were written into the separate files and situations can happen where the version numbers contain an underscore (`_'). However, this character is a methematical character in LaTeX, causing LaTeX to complain and abort. With this commit, a step has been added at the end of the configure script to convert any possible `_' to `\_'. Once it is commented (a backslash is put behind it), the underscore will be printed as it is in the final PDF. This commit was originally written by Mohammad Akhlaghi
2020-04-05The build of M4 and XLSX I/O on macOS has been fixedRaul Infante-Sainz-6/+37
Until now, the M4 that was built on macOS had internal problems (as discussed in #1): it would simply print `Abort trap: 6' in the output and abort. After looking at the build of Homebrew, I noticed that they apply a patch (correct one line) to fix this problem. To be able to apply that patch on macOS systems, I had fully open up the build recipe of M4 and atleast on the testing system, it was built successfully. Also, after successfully building M4, and thus Autoconf and thus Minizip, we were able to build XLSX I/O on a macOS and found out that the internal library's full address wasn't being put in the libraries and executables. With this commit, we now use macOS's `install_name_tool' to correct the positions of the two `libxlsxio_*' libraries in all its executables. This commit was originally written by Mohammad Akhlaghi
2020-04-05Including version number of Minizip in its installation targetRaul Infante-Sainz-1/+1
Until this commit, only the word `Minizip' was written into the Minizip installation target (without the version number of Minizip). With this commit, this minor bug has been fixed by using the appropiate Make variable: `$(minizip-version)'.
2020-04-05Building Minizip 1.x instead of Minizip 2.xRaul Infante-Sainz-17/+67
Minizip is a dependency of XLSX I/O and until now, I was just using the most recent version I found (2.9.2), but XLSX I/O is written for the Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my computer!!! I think XLSX I/O's CMake is instructed to look into system directories by default when it doesn't find the directories in the given places. And because I had installed Minizip on my operating system, it did't complain. Upon trying the build on their systems, Yahya, Raul and Zahra reported a failure in the build of XLSX I/O which was due the to the problem above (we were installing the wrong version of Minizip!). With this commit, this has been fixed by installing the 1.x series of Minizip (whish is actually installed within zlib!). This commit was original done by Mohammad Akhlaghi.
2020-04-03CMake updated to version 3.17.0Raul Infante-Sainz-2/+2
With this commit, CMake has been updated to its most recent version. This upgrade has been done because in the installation of XLSX I/O on macOS laptop, it crashes complaining about C compiler "not able to compile a simple test program". After a fast search, I found it could be possible to just use the most recent version of CMake to solve the problem. But it didn't work. In any case, it is good to have the most recent version of CMake included.
2020-04-02Imported two recent minor corrections, no conflictsMohammad Akhlaghi-2/+2
There weren't any conflicts in this merge.
2020-04-01Added a README.md file under the top-level tex/ directoryMohammad Akhlaghi-0/+59
The subdirectories here (and the fact that they may be symbolic links) may be confusing for some early project users, so a `README.md' file was added there describing them and when they are links, when directories and when some may not yet exist.
2020-04-01Corrected reference for Infante-Sainz+2020 in README-hacking.mdRaul Infante-Sainz-1/+1
Until this commit, the year of this paper was 2019 and the linking url was the temporal one. However, the final official publication year is 2020. With this commit, the year and the url have been changed to the final ones.
2020-04-01Removed multiple tabs in MissFITS tarball definitionRaul Infante-Sainz-1/+1
With this commit, multiples tabs in the definition of MissFITS tarball have been removed. Now they are white spaces.
2020-03-20Adding PyYAML, Html5lib, and Beautifulsoup4 as prerequsites of AstropyRaul Infante-Sainz-4/+4
Until this commit, PyYAML was not set as prerequisite of Astropy. This package is an optional dependency of Astropy for some particular functions. However, we have already included PyYAML into this project so it is available. With this commit, PyYAML has been set as a prerequisite of Astropy. In addition to this, Html5lib and Beautifulsoup4 have been also added as prerequsites of Astropy (and removed from Astroquery prerequisites). I noticed that both of them are optional dependencies of Astropy.
2020-03-17Astroquery updated to version 0.4Raul Infante-Sainz-3/+3
In the last update of Astropy to version 4.0 they removed some things that the previous version of Astroquery needs. As a consequence, it is also necessary to update the Astroquery version to be a ble to run with the Astropy 4.0. With this commit, the update of Astroquery to it most recent version (0.4) has been done.
2020-02-29IMPORTANT: re-preparation can only be done with --prepare-redoMohammad Akhlaghi-18/+21
Until now, the preparation phase was always executed before the final build phase when running `./project make'. But when it becomes necessary, project preparation can be slow and will un-necessarily slow down the project while the project is growing (focus is on the analysis that is done after preparation). With this commit, preparation will be done automatically the first time that the project is run (`.build/software/preparation-done.mk' doesn't exist). However, after preperation is complete once, future runs of `./project make' won't do preparation any more (by calling `top-prepare.mk'). They will directly call `top-make.mk' for the analysis. To manually invoke preparation after the first attempt, the `./project make' script should be run with the new `--prepare-redo' option. Also, since the preparation phase is now automatically done before the analysis phase, the long notice that describes running `./project make' at the end of the preparation phase has been removed in `top-prepare.mk'. It now just prints a short line, saying the preparation has been complete. Finally, when the project has not been run with the proper group configuration, it ends with an `exit 1' so the main `./project' script doesn't proceed any further.
2020-02-24MissFITS is now added to the templateSurena Fatemi-1/+28
MissFITS is package for manipulating FITS files. I added it as my first commit to the project for educational purposes.
2020-02-20Preparation phase: prepare.tex not needed to finish preparationMohammad Akhlaghi-1/+3
Until now, the final preparation target of the preparation phase depended on all the `$(makesrc)' files. This caused a problem because we were telling it to also depend on `prepare.tex' (which is the same file that is being built). With this commit, we are applying the same solution we have already done in `paper.mk' (for `paper.tex'): we are removing `prepare' from the list of prerequisites. This bug was found by Zahra Sharbaf.
2020-02-19Building of GCC now only done when /dev/shm has more than 10GB freeMohammad Akhlaghi-4/+21
Until now, like all software on GNU/Linux systems GCC would be built in RAM (to speed up the build slightly and also not put too much stress on the HDDs/SSDs). But some systems don't have enough RAM for building GCC and will complain and crash. With this commit, we have added a check on the amount of free space in the `build_tmp' directory (which will be `/dev/shm' on GNU/Linux systems). If the amount of free space isn't more than 10GB, then GCC won't be built there and a temporary directory will be built under the `$(BDIR)/software' directory for it. This bug was found by Zahra Sharbaf. This fixes bug #57853.
2020-02-18README-hacking.md: corrected typo in project commandMohammad Akhlaghi-1/+1
I had forgot to add a `./' before the call to `project' for the `--check-config'.
2020-02-16XLSX I/O installed with its two dependencies: expat and minizipMohammad Akhlaghi-0/+38
XLSX I/O is a very simple and fast program and library for reading and writing `.xls' and `.xlsx' files (mainly used by Microsoft Excel) to CSV files. It has two separate executables that can be called for an Excel file and will output a CSV plain text file that can then be used within the pipeline with more standard tools.
2020-02-13Corrected version of Texinfo when reportingMohammad Akhlaghi-1/+1
Until now we were mistakenly reporting the version of SED instead of Texinfo. With this commit, we corrected it! This was reported by Raul Infante Sainz.
2020-02-13Adding a link to the *crt*.o files in the local install directoryMohammad Akhlaghi-1/+17
Until now, we defined `LIBRARY_PATH' to fix the problem of the `ld' linker of Binutils needing several `*crt*.o' files to run. However, some software (for example ImageMagick) over-write `LIBRARY_PATH', therefore there is no other way than to put a link to these necessary files in our local build directory. With this commit, we fixed the problem by putting a link to the system's relevant files in the local library directory. This fixed the problem with ImageMagick. Later, when we build the GNU C Library in the project, we should remove this step. This bug reported by Raul Castellanos Sanchez.
2020-02-11Configure script won't crash without Fortran compiler, only a warningMohammad Akhlaghi-27/+46
Until now, when a Fortran compiler didn't exist on the host operating system, the configure script would crash with a warning. But some projects may not need Fortran, so this is just an extra/annoying crash! With this commit, it will still print the warning, but instead of a crash, it will just sleep for some seconds, then continue. Later, when if a software needs Fortran, it's building will crash, but atleast the user was warned. In the future, we should add a step to check on the necessary software and see if Fortran is necessary for the project or not. The project configuration should indeed crash if Fortran is necessary, but we should tell the user that software XXXX needs Fortran so we can't continue without a Fortran compiler. Also, a small sentence ("Project's configuration will continue in XXXX seconds.") was added after all the warnings that won't cause a crash, so user's don't think its a crash.
2020-02-11Using backup server when original download server failsMohammad Akhlaghi-7/+40
Until now, the main download script could only check one server for the given URL. However, ultimately the actual server that a file is downloaded from is irrelevant for this project: we actually check its checksum. Especially in the case of software (which are distributed over many servers), this can usually be very annoying: the servers may not properly communicate with the running system and even the 10 trials won't be enough. With this commit, the download script `reproduce/analysis/bash/download-multi-try' can take a new optional argument (a 5th argument). It assumes this argument is a space-separated list of server(s) to use as backup for the original URL. When downloading from the original URL fails, it will look into this list and try downloading the same file from each given server.
2020-02-05Imported Raul's additions to README-hacking.md, no conflictsMohammad Akhlaghi-2/+16
There were no conflicts in this merge.
2020-02-01Better message for analysis when configuration wasn't completeMohammad Akhlaghi-4/+13
Until now, when `./project make' was run after an insuccessful run of `./project configure', it would just say to run `./project configure'. But for a first time user, this could be confusing because when the configuration is done in parallel, the error message can be very high on the command-line outputs and not seen clearly. With this commit, the error message is more complete and describes the problem and what the users should do in which circumstance.
2020-02-01Make called with -k during software buildingMohammad Akhlaghi-2/+2
Until now, Make was just run ordinarily on the two Makefiles of the software building phase. Therefore when there was a problem with one software while building in parallel, Make would only complete the running rules and stop afterwards. But when other rules don't depened on the crashed rule, its a waste of time to stop the whole thing. With this commit, both calls to Make in the `configure.sh' script are done with the `-k' option (or `--keep-going' in GNU Make). With this option, if a rule crashes, the other rules that don't depend on it will also be run. Generally, anything that doesn't depend on the crashed rule will be done. The `-k' option is a POSIX definition in Make, so it is present in most implemenetations (for the call to `basic.mk').
2020-02-01IMPORTANT: reproduce/software/bash renamed to reproduce/software/shellMohammad Akhlaghi-12/+12
Until now the shell scripts in the software building phase were in the `reproduce/software/bash' directory. But given our recent change to a POSIX-only start, the `configure.sh' shell script (which is the main component of this directory) is no longer written with Bash. With this commit, to fix that problem, that directory's name has been changed to `reproduce/software/shell'.
2020-01-31Configure step: compiler checks done before basic settingsMohammad Akhlaghi-421/+413
Until now, the project would first ask for the basic directories, then it would start testing the compiler. But that was problematic because the build directory can come from a previous setting (with `./project configure -e'). Also, it could confuse users to first ask for details, then suddently tell them that you don't have a working C library! We also need to store the CPATH variable in the `LOCAL.conf' because in some cases, the compiler won't work without it. With this commit, the compiler checking has been moved at the start of the configure script. Instead of putting the test program in the build directory, we now make a temporary hidden directory in the source directory and delete that directory as soon as the tests are done. In the process, I also noticed that the copyright year of the two hidden files weren't updated and corrected them.
2020-01-31Architecture-specific C headers on Debian-based OSs now accountedMohammad Akhlaghi-6/+15
Rencely the building of GCC was allowed on Debian-based systems that have their basic C library in architecture-specific directories, like `/usr/lib/x86_64-linux-gnu'. However, these systems also have their headers in non-standard locations, for example `/usr/include/x86_64-linux-gnu' and this caused a crash on a new Ubuntu system. /usr/include/stdio.h:27:10: fatal error: bits/libc-header-start.h: No such file or directory 27 | #include <bits/libc-header-start.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. The reason it didn't cause problems on other Ubuntus that we tested before was historic: In the old days, we would ask Ubuntu systems to install multilib features to have GCC. Because they had installed those features, this problem didn't show up! But this wasn't mandatory! With this commit, the `CPATH' environment variable is set (similar to how `LIBRARY_PATH' was set) and this fixed the problem on a clean Debian virtual machine. This bug was reported by Sebastian Luna Valero.
2020-01-27Moving basic configuration of Git section in README-hacking.mdRaul Infante-Sainz-13/+13
Until this commit, the small section of `README-hacking.md' in which it is explained how to do the first configuration of Git was at the beginning of the section `First custom commit'. However, it is better to have it just before the item `Your first commit' in that section. With this commit, this change has been done. Now the reader has the necessary steps for configuring Git just before it is needed for making the first commit.
2020-01-27Initial scripts compatible with Dash (minimalistic POSIX)Mohammad Akhlaghi-40/+52
Until now, the initial project scripts were primarily tested with GNU Bash. But Bash is not generally available on all systems (it has many features beyond POSIX). Because of this, effectively we were imposing the requirement on the user that they must have Bash installed. We recently started this with setting the shebang of `project' and `reproduce/software/bash/configure.sh' to `/bin/sh'. After doing so, Raul and Gaspar reported an error on their systems. To fix the problem, I installed Dash (a minimalist POSIX-compliant shell) on my computer and temporarily set the shebangs to `/bin/dash', ran the project configuration step and fixed all issues that came up. With this commit, it can go all the way to building GCC on my system's Dash. After this stage (when `high-level.mk' is called), there is no problem, because we have our own version of GNU Bash and that installed version is used. Probably some more issues still remain and will hopefully be found in the future. While doing this, I also noticed the following two minor issues: - The `./project configure' option `--input-dir' was not recognized because it was mistakenly checking `--inputdir'. It has been corrected. - The test C programs now use the `<<EOF' method instead of `echo'. - In `basic.mk', the extra space between `syspath' and `:=' was removed (it was an ancient relic!).
2020-01-23Hashbangs of project and configure.sh set to /bin/shMohammad Akhlaghi-2/+2
Until now, the hashbang of these two shell scripts was set to `/bin/bash', hence assuming that GNU Bash exists on the host system! But this is an extra requirement on the host operating system and these two scripts should be written such that they operate on a POSIX shell (the generic `/bin/sh' which can point to any shell program). With this commit this has been implemented! We may confront some errors as the system is run on other systems, but we should fix such errors and work hard to make these two scripts as POSIX-compatible as possible (runnable on any shell, so as not to force users to install Bash before running the project). This completes Task #15525.
2020-01-23IMPORTANT: Project preparation is now also done with project makeMohammad Akhlaghi-98/+37
Until now, the main commands to run the project were these: `./project configure' (to build the software), `./project prepare' (to possibly arrange input datasets and build special configuration Makefiles) and finally `./project make' to run the project. The main logic behind the "prepare" phase `top-prepare.mk' is to build configuration files that can be fed into the "make" step and optimize its operation. For example when the total number of necessary inputs for the majority of the analysis is not as large as the total number of inputs. With "prepare" (when necessary), you go through the raw inputs, select the ones that are necessary for the rest of the project. The output of `top-prepare.mk' is a configuration file (a Make variable) that keeps the IDs (numbers, names, etc). That configuration file would then be used in the `top-make.mk' to identify the lower level targets and allow optimal project organization and management. But the last two are both part of the analysis, and while they indeed need different calls to Make to be executed, many projects don't actually need a preparation phase: ultimately, its an implementation choice by the project developers and doesn't concern the project users (or the developers when they are running it). To avoid confusing the users, or simply annoying them when a projet doesn't need it, with this commit, the top-level `top-prepare.mk' and `top-make.mk' Makefiles are called with the single `./project make' command and `./project prepare' has been dropped. I noticed this while writing the paper on this system.
2020-01-22Adding Raul as contributor of README-hacking.mdRaul Infante-Sainz-1/+2
Since I (Raul) did some changes (and I hope to do more :-)) in the `README-hacking.md', I am adding my information at the beginning of this file.
2020-01-22Adding basic configuration of Git in README-hacking.mdRaul Infante-Sainz-1/+14
Until this commit, we were asuming that Git was already properly configured. However, in order to be as complete as possible, it would be good if the basic commands to configure Git were in the `README-hacking.md'. With this commit, a small paragraph has been added in order to have the basic Git configuration commands (i.e. to configure the name, email, and favorite text editor).
2020-01-22Better explanation for missing static C libraryMohammad Akhlaghi-12/+22
Until now, the explanation for a missing static C library didn't actually guide the users to look above and see the error message! So with this commit, I edited it a little to be more clear (and mention to look above). Also, I noticed that on Amazon AWS systems, the static C library is installed as a separate package, so to help the users, I added the necessary command and some better explanation.
2020-01-22Perl is now a dependency of Coreutils, LD_LIBRARY_PATH in basic.mkMohammad Akhlaghi-67/+80
Until now Perl was built after Coreutils, but I recently noticed that Coreutils actually uses Perl while creating its manpages. So it is now built before Coreutils. Also, while testing on an Amazon AWS EC2 server, we noticed that Coreutils can't build its man page for `md5sum'. The problem was found to be due to the fact that until now, we weren't actually setting LD_LIBRARY_PATH to our installed library path in `basic.mk'. Therefore, it would crash because the server had an older version of OpenSSL than the one that the template's Coreutils was built with. In the meantime (while addressing the issues above, because we only had one thread on the AWS server) I also noticed a few programs that were using a summarize compilation command (that just prints `CC xxx.c' instead of the whole command) so I fixed them by adding `V=1'. This bug was found by Idafen Santana PĂ©rez.
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-87/+85
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-19GNU Make updated to version 4.3Mohammad Akhlaghi-3/+3
GNU Make 4.3 was just announced, so I have updated it here is well. This was important because until now the installable version was in alpha-mode (4.2.90), now its a stable version.
2020-01-19New --check-config option to ./project to check software build statusMohammad Akhlaghi-31/+56
Until now, it was necessry to run a long `while true' loop to see what is currently being built at configure time. So with this commit, a new `--checkconfig' option has been added to `./project' that can be called to run that loop and make it easier to check.
2020-01-19Corrected typo in last commit (forgetting \ at end of line)Mohammad Akhlaghi-1/+1
In the previous commmit, I had forgot to add a `\' after the newly added `sys_library_path' variable to the `high-level.mk' call.
2020-01-19LIBRARY_PATH is set accordingly based on the hostMohammad Akhlaghi-20/+58
Until now, GCC wouldn't build properly on Debian-based operating systems because `ld' needed to link with several necessary C library features like `crti.o' and `crtn.o' (this is an `ld' issue, not GCC). The solution is to add the directory containing them to `LIBRARY_PATH'. In the previous commit, I actually searched for these files, but while testing on another system, I noticed that it can be problematic (other architectures may exist). With this commit, we are actually finding the build architecture of the running GCC (which is the same as the `ld') and using that to fix a fixed directory to `LIBRARY_PATH'.