aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2019-07-24libgit2 updated to version 0.28.2, from 0.26.0Mohammad Akhlaghi-3/+3
More than two releases and bug fixes have been made to libgit2. So we are now using a more recent version in the template.
2019-07-24Temporary software building done in shared memory if availableMohammad Akhlaghi-6/+46
Until now, the template would unpack the software and build them directly in the build directory of each project. After installation, the whole unpacked directory is deleted. However, building the software involves the reading and writing of millions of files, so on the long run, it can be bad for the non-volatile memory (HDDs or SSDs), it can also be slightly slow. To fix this, if the system has a shared-memory directory (commonly named `/dev/shm'), we can do the temporary building of the software there. The great thing about this unique directory is that it is actually in the RAM, not on the HDD/SSD. This can slightly improve the speed (not much probably), but more importantly it will not do any long-term harm to the host's HDDs/SSDs. With this commit, when there is a shared memory directory mounted in `/dev/shm', and it has enough space (currently set to 2GB), the `./configure' script will make `.build/software/build-tmp' as a symbolic link to a fixed directory there. Otherwise, it will just build it as a directory in the project's shared directory. The structure has been defined in such a way that we can later easily add different standard shared-memory locations (for different operating systems). This completes task #15336.
2019-07-15Minor corrections in configure and high-levelMohammad Akhlaghi-5/+10
Configure script: when `texlive-ready-tlmgr' is not created, it is similar to not having installed TeXLive. A check was added so in this scenario the `./configure' script doesn't crash. high-level.mk: `cairo' and `pixman' are now installed in parallel and with `V=1' (so the full compilation and linking command is printed).
2019-07-08Corrected typo in the installation of libgit2Mohammad Akhlaghi-1/+1
In one of the last few commits, the commands in the recipe of libgit2 was merged with `&&' so it stops if anything fails. But I had forgot to add a `;' at the end of the `install_name_tool' command. This is corrected with this commit.
2019-07-08Rpath in libstdc++ and passing host_cc to high-levelMohammad Akhlaghi-2/+3
Until this commit, the addion of `-liconv' to `CXXFLAGS' in `high-level.mk' dependend on `host_cc', but I had forgot that `host_cc' isn't defined for `high-level.mk'. It is now defined for this Makefile also in the configure script. Also, the Standard C++ library depends on `libgcc_s.so.1', so after building GCC, it was necessary to add Rpath to it.
2019-07-07Minor corrections in high-level programsMohammad Akhlaghi-23/+24
While doing a clean build, several issues were found in the pipeline and corrected. The main issue was that with the recent installation of `libiconv', the GCC standard C++ library depends on `libiconv', so we need to explicity add an `-liconv' to any C++ compilation. The other corrected points are: - The C++ compiler is now explicitly defined in `CXX'. - libgit2 and WCSLIB's recipes weren't using `&&' between statements, so if there was an error, it would still build the target! - The CMake bootstrapping script now builds much faster in parallel.
2019-07-07Texinfo installed as a dependency of M4Mohammad Akhlaghi-7/+19
While testing on a system with no Texinfo, we noticed that M4 depends on Texinfo. To fix this problem, with this commit, it is now included in the pipeline. While doing a clean build, a few minor issues were also found and corrected in the other rules.
2019-07-07Compiler checks added to the configure scriptMohammad Akhlaghi-0/+77
To build the software, we need a C/C++ compiler. But until now at configure time there was no check on this. As a result, when the system didn't have them, the user would only learn in a crash of the programs. With this commit, some checks have been added at configure time to do basic checks and inform the user if necessary.
2019-07-07Commit message format tip added to README-hacking.mdMohammad Akhlaghi-0/+16
Until now there was no guideline in `README-hacking.md' to describe/suggest a good format for commit messages. With this commit a point has been added in the "Tips" section to help new developers contribute more smoothly. The necessity of this paragraph was pointed out by Mohammad-reza Khellat.
2019-07-07FFTW single-precision library builtMohammad Akhlaghi-8/+7
Until now, we were using the `--enable-single' configure-time option of FFTW to build its single-precision library. The reason was that according to the output of `./configure --help', this was equivalent to `--enable-float'. However, the single precision library wasn't being built. As a result, on systems that already had it, SExtractor would use the system's library and on other systems, it would simply not pass the configure step. With this commit, we are now using `--enable-float' which fixes this problem and installs the `libfftw3f*' libraries (showing that it is not equal to `--enable-single'!). Also, some optimization flags were added to hopefully make it faster. This issue was found thanks to Zahra Sharbaf and Hamed Altafi. This fixes bug #56588.
2019-07-07Using fixed TeX Live repositoryMohammad Akhlaghi-2/+14
Until now, we were letting the TeXLive installer use the default CTAN-chosen mirror based on the host. But in many cases, this is not efficient and sometimes those servers don't work. With this commit, we manually set the server to use (`rit.edu'), which is relatively fast and up to date. In this way, until we build TeXLive from source, every user will be using the same CTAN mirror.
2019-07-04Configuring wget without libiconvMohammad Akhlaghi-0/+4
On some Fedora systems, Wget's build conflicts with libiconv. With this commit, we use Wget's `--without-libiconv-prefix' configure option so it will be built without an outside libiconv.
2019-07-04libffi always installed in the lib directoryMohammad Akhlaghi-1/+11
On some Fedora systems, libffi installs under `lib64', not `lib'. As a result, Python's Setuptools can't find it and will not built (complaining about not finding the `_ctypes' module). With this commit, we fix this problem by explicitly putting a copy of libffi's installed libraries within the `lib' directory. This issue was found while testing the pipeline with Elham Saremi and Hamed Altafi.
2019-07-04C and Fortran compiler environment set in high-level.mkMohammad Akhlaghi-0/+2
Until now, we weren't explicitly setting the C and Fortran compiler environment variables (`CC' and `F77'). As a result, if the user's system had already set them, there would be a problem (and the system's compilers would be used). With this commit, we are explicitly setting these two environment variables at the start of `high-level.mk'. This bug was found after a discussion with Elham Saremi.
2019-06-30Removing libiconv before building pkg-configMohammad Akhlaghi-0/+8
An existing `libiconv' can cause a conflict with `pkg-config', this is why `libiconv' depends on `pkg-config'. On a clean build, `pkg-config' is built first. But when we don't have a clean build (and `libiconv' exists) there will be a problem. With this commit, before re-building `pkg-config', we'll remove any possibly existing installation of `libiconv'.
2019-06-29Imported recent correction from Pierre Gajda, no conflictsMohammad Akhlaghi-1/+1
There was only a conflict with `.file-metadata'.
2019-06-29Added citation for TIDES, sorted progs alphabeticallyMohammad Akhlaghi-113/+152
While reviewing Prasenjit's commits, I noticed that we had forgot to add the citation for TIDES, also to make things clear, the program/library build rules are now sorted alphabetically. Finally, I noticed that after building the TiKZ PDF figures, it is crashing (like on Prasenjit's computer). After looking around, I noticed its because we were setting the of the `TEXINPUTS' environment variable to be the installed TeX Live directory (which was ultimately redundant because by default TeX will look into where it was installed). The important thing is just that we remove any possible value the host system has, not to set new directories.
2019-06-28Fixed a conflict with libiconv and pkg-configPierre Gajda-1/+1
Libiconv has to be installed before pkg-config otherwise there would be a compilation error: gconvert.c:61:2: error: #error GNU libiconv not in use but included iconv.h is from libiconv 61 | #error GNU libiconv not in use but included iconv.h is from libiconv
2019-06-28tides library addedPrasenjit Saha-2/+12
TIDES is an ODE integrator with multiple-precision arithmetic.
2019-06-28Corrections to basic buildPrasenjit Saha-4/+6
Several corrections were necessary in the basic build: 1) the version of GCC on some systems includes an `_' which would cause a crash when building the PDF. 2) libcharset had to be manually added to the Git build.
2019-06-28Libiconv built as a dependency of GitMohammad Akhlaghi-16/+24
Prasenjit Saha reported that while building on a macOS, Git complained about not finding `libiconv' functions. Therefore with this commit, `libiconv' is also built as a dependency of Git. Also, since the build of Binutils (and the subsequent GCC) doesn't depend on the exact versions of the other basic software, they are set as existance-only prerequsites (ignoring their timestamps). This is done to avoid re-building when it is not needed.
2019-06-20Removed old comment above Gnuastro's build ruleMohammad Akhlaghi-5/+0
The comment above Gnuastro's build rule is not longer relevant, so it has been removed.
2019-06-14Minor correction in README-hacking.md for better web-renderingMohammad Akhlaghi-5/+5
The new command-box wasn't being rendered properly, so another correction is made here. I also added the prompt `$' sign in another box of commands.
2019-06-14Minor correction is code demonstration in previous commitMohammad Akhlaghi-1/+2
After checking the previous commit on Gitlab (to see how it is rendered), I noticed that the code has come in the same line, not as a sperate box. Hopefully this commit will fix it.
2019-06-14Software building status check tip added to README-hacking.mdMohammad Akhlaghi-0/+18
It is useful to visually see how the building of software is progressing when running configure. I have been using a simple Bash `while' loop for this, so I added it in the `README-hacking.md' to be useful for others too.
2019-06-14Binutils is built alone, before GCCMohammad Akhlaghi-40/+55
Until now, on GNU/Linux systems, GNU Binutils was built in parallel with other programs. As a result, the moment that the Binutils executables (most importantly `ld') are being installed, if another program is using them, we can have a crash. For some reason, this crash doesn't happen on Fedora or Arch Linux, but on some Debian-based distors, it causes the following crash when we are building Git (which happened to be built while Binuntils is being installed): credential-cache--daemon.o: file not recognized: File format not recognized In a following run of `./configure' (when Binutils has been installed), Git will build and install successfully. To fix this problem, with this commit, all basic programs are now a prerequisite of Binutils and Binutils is the sole prerequisite of GCC (which is the final target of `basic.mk'). Also, the GCC configure options were re-ordered to be easier to read (the `--with-*' options under each other, the `--enable-*' options under each other and so on).
2019-06-13Metastore now has rpathMohammad Akhlaghi-10/+16
Until now we hadn't noticed that Metastore's build doesn't include an `rpath'. As a result I got a crash during a Git commit. With this commit, on GNU/Linux systems, we now add rpath to the installed Metastore executable. During the build, I also cleaned up the Metastore build recipe to be more clear and readable (in particular we only check the user name and group name when metastore is actually built).
2019-06-13Permission flags of top.mk set to 644 like others, not 755Mohammad Akhlaghi-0/+0
Until now, for some reason, the permission flags of `top.mk' were 755 (good for an executable), not 644 (which is what they should be for a plain text file that is run by another program). This is corrected with this commit.
2019-06-12Imported recent work on Imfit, minor conflicts fixedMohammad Akhlaghi-11/+124
The recent work by Raul to import Imfit is now merged into the master branch. Only a few minor conflicts came up due to the update with CFITSIO (that Raul also done in parallel on this branch).
2019-06-12Imfit and libcurl: manually adding rpath on GNU/Linux systemsRaul Infante-Sainz-5/+18
While trying to debug the installation of Imfit, we found out that libcurl doesn't have rpath and is thus linking with the host system's libraries. So rpath is now manually added to the build of libcurl. We also found out that Imfit executables don't have rpath, so it was added to them too.
2019-06-10TeXlive: allows for updating itself and removes old version fileMohammad Akhlaghi-1/+10
Until now, TeXlive would only attempt to download/update LaTeX packages, but after some time, it will be necessary for it to update itself. When this happens, it complains about running it with `update --self'. To fix this problem, before installing/updating the LaTeX packages, we will first update tlmgr in any case. Also, we weren't removing the TeXlive package version file before appending the values to it. So it was just repeating the packages every time it was updated. With this commit, it is being removed on every new build. Finally, the version of Git was updated to its most recent version.
2019-05-31Modified Imfit installation to not consider default and host pathsRaul Infante-Sainz-8/+15
Until this commit, 'imfit' was installed using proper flags in order to use our own libraries. However, it looks first of all to the default system. As a consecuence, `imfit' program was linked to the host system libraries, even when we told to use our own libraries!! With this commit, the installation of `imfit' has been modified in order to remove the default paths already set in the `SConstruct' script. By doing this, only our paths are take into account for compiling the program. It has been tested on Mac OS laptop and it works fine. Test on GNU/Linux systems remain before merge into the main project branch.
2019-05-31Building single and double precission float libraries of FFTWRaul Infante-Sainz-1/+9
Until this commit, `fftw' was building single precission float library because `scamp' had problem on using the default double precission library. However,`imfit' and maybe other programs will use double precission float libraries. With this commit, `fftw' installation is done twice in order to build single and double precission float libraries. It does not complain and goes up to the end without crashing. However, more tests are needed in order to ensure that there is not problem on having both libraries because in principle, they share the same header file and that could cause problems.
2019-05-31Fixing rpath problem in CFITSIO installationRaul Infante-Sainz-13/+13
`cfitsio' was recently updated and it cames up with a problem when trying to build shared libraries (on Mac OS system laptop). This is because the `configure' script for building `cfitsio' include by default `rpath'. With this commit, this issue is fixed by modifying the installation of `cfitsio'. Using `sed', each ocurrence of `@rpath' in `configure' is replaced by `$(ildir)'. Once it has been done, the installation of `cfitsio' goes as normal. In this commit, the version of the `cfitsio' has been also updated to the most recent one.
2019-05-28Corrected typo in Imfit installation, but not working yetRaul Infante-Sainz-1/+1
With this commit, I have corrected a typo in the installation of `imfit'. In principle it is working on Mac OS system but when I tried to install it in GNU/Linux system it crashed. It complains about a problem with the `cfitsio' library: /pathto/libcfitsio.a: error adding symbols: File format not recognized As in the last commits done by Mohammad in the project, `cfitsio' installation has been upgraded and also the installation has been modified, I am going to try this new version. I will also check if it is a problem about dynamic/static library. It also seems that the installation is taking libraries and variables from the host system, so I will check that everything used is from our own programs/libraries.
2019-05-27Software: CFITSIO 3.47, implemented many common standardsMohammad Akhlaghi-31/+6
Until now, CFITSIO had several peculiar features which needed special attention: 1) Its tarball didn't have a `.' in the version name and would sometimes have extra `0's. 2) When unpacked it was just `cfitsio'. 3) It hard coded the directory to search for cURL library. All of these forced us to do a lot of extra steps for CFITSIO. So I got in touch with them and fortunately they were very open to correcting these issues and with version 3.47 all such issues have been addressed in the tarball. Thanks to these changes, with this commit, CFITSIO's build rule is now very similar to many other programs. I also noticed that it has an optional `--with-bz2' feature to enable unpacking `.fits.bz2' files. So this feature is also added.
2019-05-27Added paper citation of ImfitRaul Infante-Sainz-1/+26
Until this commit, `imfit' paper was not included into the acknowledgements. With this commit, a bib tex file for `imfit' has been added. So, now it is properly cited into the final paper.
2019-05-27Added Imfit into the projectRaul Infante-Sainz-1/+32
With this commit, `imfit' has been included into the project. As described in the official webpage (http://www.mpe.mpg.de/~erwin/code/imfit/): Imfit is a program for fitting astronomical images -- especially images of galaxies, though it can in principle be used for fitting other sources. This program uses the `scons' program to build itself (not the traditional GNU `configure' and `make' system). I have tested it by using an example that can be found in the `examples' directory of the decompressed tarball. It works fine without any error on my Mac OS system.
2019-05-27Adding SCons into the projectRaul Infante-Sainz-1/+18
With this commit, SCons has been included into the project. As in the official webpage of this program says: SCons is an Open Source software construction tool—that is, a next-generation build tool. Think of SCons as an improved, cross-platform substitute for the classic Make utility with integrated functionality similar to autoconf/automake and compiler caches such as ccache. In short, SCons is an easier, more reliable and faster way to build software. The motivation for including this software into the project is because there are some software that use this system for the installation. In particular, the necessity of installing it comes from Imfit. This is an astronomical software that uses this system so that is why it has been included into the project. In principle it is simple, and I have tested it on Mac OS sytem without any problem.
2019-05-24PyYAML decompressed tarball directory name fixedRaul Infante-Sainz-1/+1
Until this commit, the name of the decompressed tarball directory of PyYAML Python package was wrong. It has to be `PyYAML-version' instead of `pyyaml-version'. When I run the installation on Mac OS system it went up to the end of the installation with no error. However, when I tried to install it on a GNU/Linux system, it complained about no finding the `pyyaml-version' directory, which is the expected because the name was wrong! With this commit, I have fixed this issue by writting correctly the name of the decompressed tarball directory.
2019-05-24Added PyYAML Python package into the projectRaul Infante-Sainz-0/+13
With this commit, PyYAML Python package has been added into the project. It is widely used in the Python community and the goal is to have human readable configuration files. As in the web page (https://pypi.org/project/PyYAML/) says: YAML is a data serialization format designed for human readability and interaction with scripting languages. PyYAML is a YAML parser and emitter for Python.
2019-05-24Added LibYAML library into the projectRaul Infante-Sainz-0/+6
With this commit, LibYAML library has been added. This library is a prerequisite of the Python package PyYAML, which is widely used in the Python community when configuration scripts are needed.
2019-05-24Shared CFITSIO installation includedMohammad Akhlaghi-2/+3
By default (when you run `make' within CFITSIO), it only builds a static library. So until now, the template would only install a static version of this library. To be more clear about which libraries are used during the linking of programs that use CFITSIO, it would be helpful to have shared library versions also. Also, if the system has problems with static libraries (like macOS systems), then it won't go looking outside the template to link with them (these paths are hardcoded in the linker, which we don't build on macOS and just use the system's tools). With this commit, we are explicity running `make shared' in the CFITSIO installation to have shared CFITSIO also. I also removed the old `static' element (which we don't use anymore in any of the programs and have to remove some time later!).
2019-05-22Removing extra spaces in variable definition in configure scriptRaul Infante-Sainz-2/+2
With this commit, extra spaces in the definition of two variables in the `configure' script have been removed. Since they are defined in a `shell' context (not in `make'), variable assignation is not allow to have any space at both sides of the `=' character. I detected these typos when trying to run `./configure' in a particular project.
2019-05-22TeXLive and Ghostscript also added as dependencies of MatplotlibMohammad Akhlaghi-0/+2
Matplotlib can optionally use LaTeX and Ghostscript as dependencies to render text with LaTeX. Since we already have their build rules, with this commit, they have been added as its prerequisites.
2019-05-21Imported Matplotlib installation, no conflictsMohammad Akhlaghi-0/+14
There weren't any conflicts in this merge.
2019-05-21README-hacking.md: corrected typoMohammad Akhlaghi-1/+1
A title in the checklist was mistakenly using "project" (customized template) instead of "template".
2019-05-21ImageMagick put as prerequisite of MatplotlibRaul Infante-Sainz-0/+1
With this commit, ImageMagick program has been set as prerequisite of Matplotlib Python package. Since some submodules of Matplotlib rely on ImageMagick programs (for example, those to make image animations), and now we have ImageMagick into the project, it is good to install ImageMagick when Matplotlib is requested to be installed.
2019-05-21ImageMagick is now included into the projectRaul Infante-Sainz-0/+13
With this commit, ImageMagick software has been added into the project. This software is useful to deal and treat images from the command line. Since it is widely used and a lot of other programs rely on it, it is worth to have it into the project.
2019-05-21Source directory links to build directory all managed in configureMohammad Akhlaghi-18/+53
Until now, the `tex/build' symbolic link was put in the clone/source tree when the build-directory's `tex' directory was being built. Thanks to Roberto Baena, we just found a bug because of this behavior: when a second group member is trying to build the pipeline, since the build directory's `tex' directory already exists, no `tex/build' will be put in their clone/source directory. As a result, the PDF building will crash. To fix this (and keep things organized), the two `tex/build' and `tex/tikz' links (to the build directory) are now built in the configure step while it is building all the top-level directories. They are no longer built within the Makefiles. Also, a comment was added on top of every directory built during the configuration phase to be clear. This fixes bug #56362.