aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2019-08-22Adding fpack and funpack in the installation of CFITSIORaul Infante-Sainz-2/+4
Until this commit, `fpack' and `funpack' were not installed by default with the installation of CFITSIO. It is necessary to explicity do a `make fpack' and `make funpack' to have them installed. With this commit, these two programs have been added.
2019-08-22Fixed typo in beautifulsoup4 Python package checksum nameRaul Infante-Sainz-3/+3
Until this commit, the name of the variable for `beautifulsoup4' checksum was wrong, and because of that, it was not able to install it. With this commit, `beautifulsoup-checksum' has been replaced for `beautifulsoup4-checksum' in the `reproduce/software/make/python.mk' Makefile, and the problem has been fixed. This was not noticed previously because this Python package is only installed when some high level programs are requested to be installed. With this commit the version of `imagemagick' program has been also updated because the previous version is not available in the official website anymore.
2019-08-22Imported fix for libgit2 on macOS, no conflictsMohammad Akhlaghi-1/+5
There were no conflicts in this merge.
2019-08-21Using libgit2 implementation of libconv with the option -DUSE_ICONV=OFFRaul Infante-Sainz-1/+5
When trying to install `libgit2' on my macOS system, it complains about not finding `_iconv*' functions! But apparently `libgit2' has its own implementation of `libiconv' that it uses if it can't find `libiconv' on macOS. So, the solution to this problem was to add `-DUSE_ICONV=OFF' to the configuration options of `libgit2'. I reported this issue that now is fixed thanks to the help of Mohammad Akhlaghi.
2019-08-22Paper's title and author information moved to main paper.texMohammad Akhlaghi-18/+24
Until now, the paper's title and author information were set it `tex/src/preamble-header.tex'. But they are actually shown in the final PDF paper and a much better place to keep them is the top-level `paper.tex'. With this commit, the setting of the title and author names has been moved to `paper.tex', just after importing all the preambles. However, the basic package importation and low-level settings are still set in `tex/src/preamble-header.tex', because they are relatively low-level. This task was suggested by Deepak (Indian Institute of Astrophysics).
2019-08-21Gnuastro's configuration file updated for version 0.10Mohammad Akhlaghi-2/+8
Recently the version of Gnuastro in the template was updated to version 0.10. However, I had forgot to update the `gnuastro.conf' file to fit with the necessary new features of this version. The new general Gnuastro configuration file is now added instead. This bug was reported by Deepak.
2019-08-20Corrected typo in README-hacking.mdMohammad Akhlaghi-1/+1
Until now, when describing the sections to remove for customizing a project, I had mistakenly repeated the `%% Start of main body.' statement. With this commit, the second one is changed to `%% End of main body.' This issue was reported by Deepak.
2019-08-18Updated README-hacking.md's checklist for better usabilityMohammad Akhlaghi-126/+166
After the checklist was applied in the 5th Indo-French Astronomy School, we found some cases in the checklist that were extra (and thus had to be removed), or were needed (and thus were added). Also the non-necessary steps for a first commit were moved to a separate/new section in the checklist for the people to add after doing their first commit. Also, the software part of the paper was moved to an appendix.
2019-08-16Libtiff built without JBIG-KIT supportMohammad Akhlaghi-2/+5
Until now, we weren't explicitly telling libtiff to ignore JBIG-KIT. So on some systems, it would try to link withit and would thus fail. With this commit, we have disabled JBIG-KIT support for libtiff. I tried to import it into the template, but it doesn't have use the standard GNU Build system. Maybe later we can add a set of build rules for it, I don't have time now. Also, this problem with libtiff occurred while building Ghostscript. But was fixed after adding this option to libtiff. So libtiff was added as a dependency of Ghostscript. This bug was reported by Sheeraz Ahmad.
2019-08-16OpenSSH privsep-path now set within project's build directoryMohammad Akhlaghi-1/+2
Until now we weren't setting OpenSSH's `privsep-path' configure option. As a result, it would try to use its default (`/var/empty'). Therefore, when the host doesn't have `/var/empty', OpenSSH would crash because of not having permissions to create this directory. With this commit, we are now using OpenSSH's `--with-privsep-path' configure-time option to explicitly use a directory with the project's build directory. This bug was found by Sheeraz Ahmad and Amina Aahil.
2019-08-15WCSLIB 6.4 doesn't need explicit link with CFITSIOMohammad Akhlaghi-17/+5
This was a bug in WCSLIB 6.3 that has been fixed in WCSLIB 6.4. From WCSLIB's changelog: "The rule change to the Fortran makefile in v6.3 to add getwcstab_f.o to the sharable library causes it to depend on CFITSIO to resolve fits_get_wcstab(). Hence backed out of that change.". The actual error was like this: Undefined symbols for architecture x86_64: "_fits_read_wcstab", referenced from: _ftwcst_ in getwcstab_f.o "_gFitsFiles", referenced from: _ftwcst_ in getwcstab_f.o ld: symbol(s) not found for architecture x86_64
2019-08-08libnsl, libtirpc and rpcsvc installed as non-used biber dependenciesMohammad Akhlaghi-6/+49
These three libraries are dependencies of Biber, so we will need them later, but since we don't build biber from source now, we can't control what library it links with. With this commit, we have just added their versions, checksum, download URL and build rule incase they are useful in other software. Later, when we build Biber (and Texlive in general) from source, we'll be able to use these.
2019-08-08Corrected typo when fixing libffi's installation directoryMohammad Akhlaghi-1/+1
In the line where we checked if libffi is installed in `lib/' or `lib64/', there was a typo that lead to an incorrect result: we had forgot to add a `-f' to the second check. This is corrected with this commit.
2019-08-08Gnuastro's build: removing the `make check' stepMohammad Akhlaghi-2/+1
Until now, unlike most other programs, in Gnuastro we would run `make check', but this causes a crash on some systems, because of its BuildProgram test: a linking error because the library isn't installed yet. Which is natural in cases like this (and must be corrected in future Gnuastro releases). With this commit, the checks of Gnuastro have been removed.
2019-08-08Static PatchELF only built when static C library existsMohammad Akhlaghi-14/+69
Until now, when building PatchELF, we would always require that it be done statically. However, some systems don't have a static C library available for linking. This cause a crash in the static building of PatchELF. But a static PatchELF is necessary for correcting RPATH in GCC's outputs. With this commit, in the configure script we check if a static C library is linkable for the compiler. If it isn't then `host_cc' will be set to 1 and GCC won't be built. We also pass the result of this test to `basic.mk' (through `good_static_lib'), so if a static C library isn't available, it builds a dynamically linked PatchELF. This bug was reported by Elham Saremi.
2019-08-07Removed temporary files to check Fortarn compilerMohammad Akhlaghi-2/+3
Until now, the Fortran compiler check wouldn't delete the files it creates in the temporary software building directory. With this commit, the cleaning steps have been added.
2019-08-06OpenSSH necessary to use OpenMPIMohammad Akhlaghi-2/+15
Until now, OpenMPI was being installed without any dependency. This was fine because it would indeed build. But the moment you tried loading something that depends on it (for example `mpi4py' through `astropy'), you would get an error complaining that SSH isn't present. With this commit, the pipeline now also installs OpenSSH to solve this problem.
2019-08-05WCSLIB needs -lcfitsio on some systemsMohammad Akhlaghi-1/+13
Until now, we were relying on WCSLIB's internal checking and linking with CFITSIO. But on one macOS system (not others that had no problem!), we noticed that it complains with undefined symbol linking errors to CFITSIO libraries. With this commit, as a fast/ugly solution, we are explicity adding `-lcfitsio' to WCSLIB's `LIBS' variable so all binaries are linked with it automatically. We'll be in touch with the WCSLIB author to see if a better solution can be found.
2019-08-05Libffi builds without Java supportMohammad Akhlaghi-1/+2
Until now, we weren't explicitly disabling Java in the build of libffi because there was no Java platform on the systems we tested. But recently Yahya Sefidbakht report a crash in libffi (reported in bug #56716) because of Java not being compiled properly. Unfortunately libffi doesn't have a configure option to disable Java, but it does have an internal macro (`NO_JAVA_RAW_API'). With this commit, we we defined this macro in the `make' step, and it solved the problem. This fixes bug #56716.
2019-08-05Backup repository set to http://akhlaghi.org/reproduce-softwareMohammad Akhlaghi-15/+17
Some of the software tarballs are directly available on their webpage (for example due to build problems on systems, where we had to clone the software and build its tarball ourselves until the next release). Until now, only for these software, these tarballs were hosted on `http://akhlaghi.org/src'. But now, I have moved a clone of the software backup repository (including all its software) to `http://akhlaghi.org/reproduce-software'. To be more clear and have a single place for the backup software, the URL of those software has also been updated in the project source.
2019-08-05Gnuastro updated to version 0.10Mohammad Akhlaghi-2/+2
A new version of Gnuastro was recently released with many improvments and bug fixes, so it is updated here too.
2019-08-05Configuration: Checking that C and Fortran compilers workMohammad Akhlaghi-116/+199
Until now, we were just checking for the existance of a C and Fortran compiler. But it can happen that even if they exist, they don't operate properly, for example see some errors that have been reported until now in P.S. (both on different macOS systems). But finding this source after the programs have started is frustrating for the user. With this commit, before we start building anything, we'll check these two compilers with a simple program and see if they can indeed compile, and if their compiled program can run. If it doesn't work an elaborate error message is printed to help the users navigate to a solution. Also, the building of `flock' within `configure.sh' has been moved just before calling `basic.mk'. This was done so any warning/error message is printed before actually building anything. This fixes bug #56715. P.S. The error messages: C compiler ---------- conftest.c:9:19: fatal error: stdio.h: No such file or directory ^ compilation terminated. ---------- Fortran compiler ---------------- dyld: Library not loaded: @rpath/libisl.10.dylib Referenced from: /path/to/anaconda2/gcc/libexec/gcc/x86_64-apple-darwin15.5.0/4.9.3/f951 Reason: image not found gfortran: internal compiler error: Abort trap: 6 ----------------
2019-08-01Updated version of mpi4py doesn't conflict with OpenMPIMohammad Akhlaghi-14/+5
Until now, in version 3.0.1, mpi4py couldn't be built with the most recent version of OpenMPI. However, after trying the next version (3.0.2), I noticed that it builds successfully without a problem.
2019-08-01Git hooks removed after doing a distcleanMohammad Akhlaghi-0/+5
Until now, when you needed to completely clean a project (with `./project make distclean') the Git hooks that are installed during configure time would cause problems when committing (the `pre-commit' hook in particular won't allow you to commit anything!). With this commit, before deleting the software, the template first removes these Git hooks.
2019-08-01Typo in previous commit correctedMohammad Akhlaghi-1/+0
After making the previous commit, I noticed an extra line (redundantly defining a wrong `BASH_ENV') that should have been deleted. It has been corrected.
2019-08-01Bash startup script for every recipeMohammad Akhlaghi-0/+66
Until now the only way to define the environment of the Make recipes was through the exported Make variables (mostly in `initialize.mk' for the analysis steps for example). However, there is only so much you can do with environment variables! In some situations you want slightly more complicated environment control, like setting an alias or running of scripts (things that are commonly done in the `~/.bashrc' file of users to configure their interactive, non-login shells). With this commit, a `reproduce/software/bash/bashrc.sh' has been defined for this job (which is currently empty!). Every major Make step of the project adds this file as the `BASH_ENV' environment variable, so the shell that is created to execute a recipe first executes this file, then the recipe. Each top-level Makefile also defines a `PROJECT_STATUS' environment variable that enables users to limit their envirnoment setup based on the condition it is being setup (in particular in the early phase of `basic.mk', where the user can't make any assumption about the programs and has to write a portable shell script).
2019-07-31GCC: libstdc++ has a link to libiconvMohammad Akhlaghi-0/+1
After adding the libiconv library to the template, the C++ library uses three of its functions (`libiconv', `libiconv_open' and `libiconv_close'). However, it doesn't explicity link with it inside its shared library! I tried by exporting `LIBS=-liconv' before the GCC configure script but it crashed as soon as it went on to the second GCC building stage (because this environment variable was no longer present there). I also tried adding the C++ configure option of `--enable-cstdio' to the GCC configure options (so it doesn't use iconv according to the manual), but it made no change. With this commit, as a brute-force solution, `patchelf --add-needed' is run on the installed `libstdc++.so', so `libiconv.so' is explicitly included inside the `libstdc++' shared library. This bug was found by Roberto Baena Galle while trying to load Matplotlib (which needed the C++ library). This fixes bug #56702.
2019-07-29Checking software tarball checksums before building softwareMohammad Akhlaghi-245/+472
Until now, there was no check on the integrity of the contents of the downloaded/copied software tarballs, we only relied on the tarball name. This could be bad for reproducibility and security, for example on one server the name of a tarball may be the same but with different content. With this commit, the SHA512 checksums of all the software are stored in the newly created `checksums.mk' (similar to how the versions are stored in the `versions.mk'). The resulting variable is then defined for each software and after downloading/copying the file we check to see if the new tarball has the same checksum as the stored value. If it doesn't the script will crash with an error, informing the user of the problem. The only limitation now is a bootstrapping problem: if the host system doesn't already an `sha512sum' executable, we will not do any checksum verification until we install our `sha512sum' (as part of GNU Coreutils). All the tarballs downloaded after GNU Coreutils are built will have their checksums validated. By default almost all GNU/Linux systems will have a usable `sha512sum' (its part of GNU Coreutils after all for a long time: from the Coreutils Changelog file atleast since 2013). This completes task #15347.
2019-07-29Added explanation on .file-metadata within README-hacking.mdMohammad Akhlaghi-0/+36
Until now there was no clear explanation on `.file-metadata' within the project. But since it sometimes appears in the Git changed files and its binary, it was necessary to add a short explanation to inform users. With this commit a section has been added to the "Project architecture" section of `README-hacking.md' to give some context on what it is and how to deal with it. This was suggested by Hamed Altafi.
2019-07-29Tip added at initial configuration notice on how to see progressMohammad Akhlaghi-0/+10
The configuration step (building all the ncessary software) can take some time. It is natual for the user to want to see how the build is going (which software is being built at every moment). So far, we have only put a "Inspecting status" section in `README-hacking.md' that describes a solution, but some early users may not have read it yet. With this commit a short tip was added in the initial installation notice to inform the user of this very useful command.
2019-07-28Corrected typo in environment before running makeMohammad Akhlaghi-4/+4
We recently moved the system's `rm' program absolute address to a shell variable that is found during the `./project' script. But I had forgot to account for the difference between the Make and Bash variable naming differences. I had also forgot to add a value to the HOME variable. With this commit both are corrected: the system's `rm' path is now called `sys_rm' and the HOME variable is set.
2019-07-28Single wrapper instead of old ./configure, Makefile and ./for-groupMohammad Akhlaghi-440/+479
Until now, to work on a project, it was necessary to `./configure' it and build the software. Then we had to run `.local/bin/make' to run the project and do the analysis every time. If the project was a shared project between many users on a large server, it was necessary to call the `./for-group' script. This way of managing the project had a major problem: since the user directly called the lower-level `./configure' or `.local/bin/make' it was not possible to provide high-level control (for example limiting the environment variables). This was especially noticed recently with a bug that was related to environment variables (bug #56682). With this commit, this problem is solved using a single script called `project' in the top directory. To configure and build the project, users can now run these commands: $ ./project configure $ ./project make To work on the project with other users in a group these commands can be used: $ ./project configure --group=GROUPNAME $ ./project make --group=GROUPNAME The old options to both configure and make the project are still valid. Run `./project --help' to see a list. For example: $ ./project configure -e --host-cc $ ./project make -j8 The old `configure' script has been moved to `reproduce/software/bash/configure.sh' and is called by the new `./project' script. The `./project' script now just manages the options, then passes control to the `configure.sh' script. For the "make" step, it also reads the options, then calls Make. So in the lower-level nothing has changed. Only the `./project' script is now the single/direct user interface of the project. On a parallel note: as part of bug #56682, we also found out that on some macOS systems, the `DYLD_LIBRARY_PATH' environment variable has to be set to blank. This is no problem because RPATH is automatically set in macOS and the executables and libraries contain the absolute address of the libraries they should link with. But having `DYLD_LIBRARY_PATH' can conflict with some low-level system libraries and cause very hard to debug linking errors (like that reported in the bug report). This fixes bug #56682.
2019-07-27DYLD_LIBRARY_PATH also fixed for macOS systemsMohammad Akhlaghi-23/+26
Until now we were only setting the `LD_LIBRARY_PATH' environment variable for GNU/Linux systems. But macOS systems use the `DYLD_LIBRARY_PATH'. With this commit, for better control over the environment, we are also fixing `DYLD_LIBRARY_PATH' in all the places that we are setting the general environment variables.
2019-07-26Better explanation of suggested commit messages in REAME-hacking.mdMohammad Akhlaghi-19/+25
Until now the description of the commit message guidelines wasn't clear enough and could cause confusion, in particular because it didn't describe why some basic formatting issues are mandatory. With this commit, it is explained that the main reason we require contributors for follow this format is "consistency" within the project. Also generally it was edited to become more elaborate and explain the points more clearly. I also ran a spell check over the whole file and fixed a few typos. This correction was suggested by Mohammad-reza Khellat.
2019-07-26PatchELF built statically and updatedMohammad Akhlaghi-2/+8
Until now, like all other software, PatchELF would install with dynamic linking. However, PatchELF links with `libstdc++' so on one system, I noticed that PatchELF gives a segmentation fault and corrupts `libstdc++' while correcting its RPATH (after installing GCC). The solution is to build PatchELF statically. With this commit, we force PatchELF to be built statically (it only installs on GNU/Linux systems anyway, so there is no problem with static linking on macOS). This solved the problem on that system. While looking at its documentation, I also noticed that a new version of PatchELF has been released after almost three years, so it has been updated in the template also. This fixes bug #56673.
2019-07-25Updated version of WCSLIB to 6.3, previously 6.2Mohammad Akhlaghi-3/+3
Some bugs have been fixed in the new version of WCSLIB, so it has been updated in the template.
2019-07-25Corrected preparation to build software in shared memoryMohammad Akhlaghi-22/+25
The previous implementation of using shared memory to build software was edited to be more clear and less prone to errors.
2019-07-24libgit2 updated to version 0.28.2, from 0.26.0Mohammad Akhlaghi-3/+3
More than two releases and bug fixes have been made to libgit2. So we are now using a more recent version in the template.
2019-07-24Temporary software building done in shared memory if availableMohammad Akhlaghi-6/+46
Until now, the template would unpack the software and build them directly in the build directory of each project. After installation, the whole unpacked directory is deleted. However, building the software involves the reading and writing of millions of files, so on the long run, it can be bad for the non-volatile memory (HDDs or SSDs), it can also be slightly slow. To fix this, if the system has a shared-memory directory (commonly named `/dev/shm'), we can do the temporary building of the software there. The great thing about this unique directory is that it is actually in the RAM, not on the HDD/SSD. This can slightly improve the speed (not much probably), but more importantly it will not do any long-term harm to the host's HDDs/SSDs. With this commit, when there is a shared memory directory mounted in `/dev/shm', and it has enough space (currently set to 2GB), the `./configure' script will make `.build/software/build-tmp' as a symbolic link to a fixed directory there. Otherwise, it will just build it as a directory in the project's shared directory. The structure has been defined in such a way that we can later easily add different standard shared-memory locations (for different operating systems). This completes task #15336.
2019-07-15Minor corrections in configure and high-levelMohammad Akhlaghi-5/+10
Configure script: when `texlive-ready-tlmgr' is not created, it is similar to not having installed TeXLive. A check was added so in this scenario the `./configure' script doesn't crash. high-level.mk: `cairo' and `pixman' are now installed in parallel and with `V=1' (so the full compilation and linking command is printed).
2019-07-08Corrected typo in the installation of libgit2Mohammad Akhlaghi-1/+1
In one of the last few commits, the commands in the recipe of libgit2 was merged with `&&' so it stops if anything fails. But I had forgot to add a `;' at the end of the `install_name_tool' command. This is corrected with this commit.
2019-07-08Rpath in libstdc++ and passing host_cc to high-levelMohammad Akhlaghi-2/+3
Until this commit, the addion of `-liconv' to `CXXFLAGS' in `high-level.mk' dependend on `host_cc', but I had forgot that `host_cc' isn't defined for `high-level.mk'. It is now defined for this Makefile also in the configure script. Also, the Standard C++ library depends on `libgcc_s.so.1', so after building GCC, it was necessary to add Rpath to it.
2019-07-07Minor corrections in high-level programsMohammad Akhlaghi-23/+24
While doing a clean build, several issues were found in the pipeline and corrected. The main issue was that with the recent installation of `libiconv', the GCC standard C++ library depends on `libiconv', so we need to explicity add an `-liconv' to any C++ compilation. The other corrected points are: - The C++ compiler is now explicitly defined in `CXX'. - libgit2 and WCSLIB's recipes weren't using `&&' between statements, so if there was an error, it would still build the target! - The CMake bootstrapping script now builds much faster in parallel.
2019-07-07Texinfo installed as a dependency of M4Mohammad Akhlaghi-7/+19
While testing on a system with no Texinfo, we noticed that M4 depends on Texinfo. To fix this problem, with this commit, it is now included in the pipeline. While doing a clean build, a few minor issues were also found and corrected in the other rules.
2019-07-07Compiler checks added to the configure scriptMohammad Akhlaghi-0/+77
To build the software, we need a C/C++ compiler. But until now at configure time there was no check on this. As a result, when the system didn't have them, the user would only learn in a crash of the programs. With this commit, some checks have been added at configure time to do basic checks and inform the user if necessary.
2019-07-07Commit message format tip added to README-hacking.mdMohammad Akhlaghi-0/+16
Until now there was no guideline in `README-hacking.md' to describe/suggest a good format for commit messages. With this commit a point has been added in the "Tips" section to help new developers contribute more smoothly. The necessity of this paragraph was pointed out by Mohammad-reza Khellat.
2019-07-07FFTW single-precision library builtMohammad Akhlaghi-8/+7
Until now, we were using the `--enable-single' configure-time option of FFTW to build its single-precision library. The reason was that according to the output of `./configure --help', this was equivalent to `--enable-float'. However, the single precision library wasn't being built. As a result, on systems that already had it, SExtractor would use the system's library and on other systems, it would simply not pass the configure step. With this commit, we are now using `--enable-float' which fixes this problem and installs the `libfftw3f*' libraries (showing that it is not equal to `--enable-single'!). Also, some optimization flags were added to hopefully make it faster. This issue was found thanks to Zahra Sharbaf and Hamed Altafi. This fixes bug #56588.
2019-07-07Using fixed TeX Live repositoryMohammad Akhlaghi-2/+14
Until now, we were letting the TeXLive installer use the default CTAN-chosen mirror based on the host. But in many cases, this is not efficient and sometimes those servers don't work. With this commit, we manually set the server to use (`rit.edu'), which is relatively fast and up to date. In this way, until we build TeXLive from source, every user will be using the same CTAN mirror.
2019-07-04Configuring wget without libiconvMohammad Akhlaghi-0/+4
On some Fedora systems, Wget's build conflicts with libiconv. With this commit, we use Wget's `--without-libiconv-prefix' configure option so it will be built without an outside libiconv.
2019-07-04libffi always installed in the lib directoryMohammad Akhlaghi-1/+11
On some Fedora systems, libffi installs under `lib64', not `lib'. As a result, Python's Setuptools can't find it and will not built (complaining about not finding the `_ctypes' module). With this commit, we fix this problem by explicitly putting a copy of libffi's installed libraries within the `lib' directory. This issue was found while testing the pipeline with Elham Saremi and Hamed Altafi.