| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Until now, in order to build Ghostscript, the project used the host's Xorg
libraries. This was because we hadn't yet added the necessary build rules
for them.
With this commit, the instructions to build the necessary Xorg libraries
for Ghostscript have also been added. Also, the shared Ghostscript library
has been built with this commit and two sets of standard fonts are also
included, setting us on the path to build TeXLive from source later.
This task was done with the help and support of Raul Infante-Sainz.
|
|
Until this commit, there was a problem when building Bison in parallel in
macOS systems. With this commit, this problem has been fixed by updating
Bison to its most recent version (3.6).
|
|
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause
conflicts to your project if you have changed the software building
Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and
'python.mk'). If your project has only added analysis, it shouldn't be
affected.
This is a large commit, involving a long series of corrections in a
differnt branch which is now finally being merged into the core Maneage
branch. All changes were related and came up naturally as the low-level
infrastructure was improved. So separating them in the end for the final
merge would have been very time consuming and we are merging them as one
commit.
In general, the software building Makefiles are now much more easier to
read, modify and use, along with several new features that have been
added. See below for the full list.
- Until now, Maneage needed the host to have a 'make' implementation
because Make was necessary to build Lzip. Lzip is then used to
uncompress the source of our own GNU Make. However, in the
minimalist/slim versions of operating systems (for example used to build
Docker images) Make isn't included by default. Since Lzip was the only
program before our own GNU Make was installed, we consulting Antonio
Diaz Diaz (creator of Lzip) and he kindly added the necessary
functionality to a new version of Lzip, which we are using now. Hence we
don't need to assume a Make implementation on the host any more. With
this commit, Lzip and GNU Make are built without Make, allowing
everything else to be safely built with our own custom version of GNU
Make and not using the host's 'make' at all.
- Until recently (Commit 3d8aa5953c4) GNU Make was built in
'basic.mk'. Therefore 'basic.mk' was written in a way that it can be
used with other 'make' implementations also (i.e., important shell
commands starting with '&&' and ending in '\' without any comments
between them!). Furthermore, to help in style uniformity, the rules in
'high-level.mk' and 'python.mk' also followed a similar structure. But
due to the point above, we can now guarantee that GNU Make is used from
the very first Makefile, so this hard-to-read structure has been removed
in the software build recipes and they are much more readable and
edit-friendly now.
- Until now, the default backup servers where at some fixed URLs, on our
own pages or on Gitlab. But recently we uploaded all the necessary
software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is
more suitable for this task (it promises longevity, has a fixed DOI,
while allowing us to add new content, or new software tarball
versions). With this commit, a small script has been written to extract
the most recent Zenodo upload link from the Zenodo DOI and use it for
downloading the software source codes.
- Until now, we primarily used the webpage of each software for
downloading its tarball. But this caused many problems: 1) Some of them
needed Javascript before the download, 2) Some URLs had a complex
dependency on the version number, 3) some servers would be randomly down
for maintenance and etc. So thanks to the point above, we now use the
Zenodo server as the primary download location. However, if a user wants
to use a custom software that is not (yet!) in Zenodo, the download
script gives priority to a custom URL that the users can give as Make
variables. If that variable is defined, then the script will use that
URL before going onto Zenodo. We now have a special place for such URLs:
'reproduce/software/config/urls.conf'. The old URLs (which are a good
documentation themselves) are preserved here, but are commented by
default.
- The software source code downloading and checksum verification step has
been moved into a Make function called 'import-source' (defined in the
'build-rules.mk' and loaded in all software Makefiles). Having taken all
the low-level steps there, I noticed that there is no more need for
having the tarball as a separate target! So with this commit, a single
rule is the only place that needs to be edited/added (greatly
simplifying the software building Makefiles).
- Following task #15272, A new option has been added to the './project'
script called '--all-highlevel'. When this option is given, the contents
of 'TARGETS.conf' are ignored and all the software in Maneage are built
(selected by parsing the 'versions.conf' file). This new option was
added to confirm the extensive changes made in all the software building
recipes and is great for development/testing purposes.
- Many of the software hadn't been tested for a long time! So after using
the newly added '--all-highlevel', we noticed that some need to be
updated. In general, with this commit, 'libpaper' and 'pcre' were added
as new software, and the versions of the following software was updated:
'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in'
shell script was added in 'reproduce/software/shell/' which is installed
with 'libpaper'.
- Even though we intentionally add the necessary flags to add RPATH inside
the built executable at compilation time, some software don't do it
(different software on different operating systems!). Until now, for
historical reasons this check was done in different ways for different
software on GNU/Linux sytems. But now it is unified: if 'patchelf' is
present we apply it. Because of this, 'patchelf' has been put as a
top-level prerequisite, right after Tar and is installed before anything
else.
- In 'versions.conf', GNU Libtool is recognized as 'libtool', but in
'basic.mk', it was 'glibtool'! This caused many confusions and is
corrected with this commit (in 'basic.mk', it is also 'libtool').
- A new argument is added to the './project' script to allow easy loading
of the project's shell and environment for fast/temporary testing of
things in the same environment as the project. Before activating the
project's shell, we completely remove all host environment variables to
simulate the project's environment. It can be called with this command:
'./project shell'. A simple prompt has also been added to highlight that
the user is using the Maneage shell!
|
|
Until this commit, the file `BDIR/software/preparation-done.mk' were not
removed when cleaning the project with `./project make clean'. This file
is generated in the preparation of the data during the analysis step.
However, the cleaning is expected to remove anything generated in the
analysis process! Step by step, with the commands:
./project make ---> Will make the preparation and analysis
./project make clean ---> Will remove all analysis outputs (but
not `preparation-done.mk')
./project make ---> Won't do the preparation, only analysis!
However, in the last step it should do the preparation again, because
the input data could have change for any reason. With this commit, the
file `BDIR/software/preparation-done.mk' is removed when cleaning the
project, and consequently, in the analysis step the input data is
prepared.
|
|
In Commit 105467fe6402 (Software tarballs are downloaded even if not
built), we introduced tests to download the tarballs of software even if
they don't need to be built on the respective host. However some small
typos in the checks existed that could cause a crash on macOS. In
particular in the building of PatchELF and libbsd we had forgot to add the
necessary 'x' before the 'yes' in the conditional to check if a we are on
macOS or not.
With this commit these two checks have been corrected. Also, in the
building of 'isl' and 'mpc', we now check for 'host_cc' (signifying that
the user wants to use their host C compiler for the high-level step)
instead of 'on_mac_os'. The reason is that even on non-macOS systems, a
user may not want to build the C compiler from scratch and use the
'--host-cc' option. In such cases, they don't need to compile 'isl' and
'mpc'.
|
|
With this commit, Maneage now includes instructions to build the memory
tracing tool Valgrind and the program 'patch' (to apply corrections/patches
in text files and in particular the sources of programs).
For this version of Valgrind, some patches were necessary for an interface
with OpenMPI 2.x (which is the case now). Also note that this version of
Valgrind's checks can fail with GCC 10.1.x (when using '--host-cc'), and
the failures aren't due to internal problems but due to how the tests are
designed (https://bugs.gentoo.org/707598). So currently if any of
Valgrind's checks fail, Maneage still assumes that Valgrind was built and
installed successfully.
While testing on macOS, we noticed that it needs the macOS-specific 'mig'
program which we can't build in Maneage. DESCRIPTION: The mig command
invokes the Mach Interface Generator to generate Remote Procedure Call
(RPC) code for client-server style Mach IPC from specification files. So a
symbolic link to the system's 'mig' is now added to the project's programs
on macOS systems.
This commit's build of Patch and Valgrind has been tested on two GNU/Linux
distributions (Debian and ArchLinux) as well as macOS.
Work on this commit started by Boud Roukema, but also involved tests and
corrections by Mohammad Akhlaghi and Raul Infante-Sainz.
|
|
Until now Maneage used the host's GNU Gettext if it was present. Gettext is
a relatively low-level software that enables programs to print messages in
different languages based on the host environment. Even though it has not
direct effect on the running of the software for Maneage and the lanugage
environment in Maneage is pre-determined, it is necessary to have it
because if the basic programs see it in the host they will link with it and
will have problems if/when the host's Gettext is updated.
With this commit (which is actually a squashed rebase of 9 commits by Raul
and Mohammad), Gettext and its two extra dependencies (libxml2 and
libunistring) are now installed within Maneage as a basic software and
built before GNU Bash. As a result, all programs built afterwards will
successfully link with our own internal version of Gettext and
libraries. To get this working, some of the basic software dependencies had
to updated and re-ordered and it has been tested in both GNU/Linux and
macoS.
Some other minor issues that are fixed with this commit
- Until this commit, when TeX was not installed, the warning message
saying how to run the configure step in order to re-configure the
project was not showing the option `-e'. However, the use of this option
is more convenient than entering the top-build directory and etc every
time. So with this commit, the warning message has been changed in order
use the option `-e' in the re-configure of the project.
- Until now, on macOS systems, Bash was not linking with our internally
built `libncurses'. With this commit, this has been fixed by setting
`--withcurses=yes' for Bash's configure script.
|
|
Until now, Astropy was instructed to build its own internal copy of the
Expat library. However, with the recent commits before, Maneage now
includes an installation of Expat and Astropy can't keep the two (its
internal version and the project's version) separate, so they conflict and
don't let Astropy get built.
With this commit, the problem is fixed by setting the Expat library as an
explicit dependency of Astropy and asking Astropy to ignore its internal
copy.
While doing this, I recognized that it is much easier and elegant to add
steps in various stages of the `pybuild' function through hooks instead of
variables. So the fifth argument of the `pybuild' function was removed and
now it actually checks if hooks are defined as functions and if so, they
will be called.
The `pyhook_after' function was also implemented in the installation of
`pybind11' (which needed it, given that the 5th argument of `pybuild' was
removed) and after doing a test-build, I noticed that two lines were not
ending with a `\' in `boost' (a dependency of `pybind11').
Commit written originally by Mohammad Akghlaghi
|
|
Until now we would simply return the version numbers as they were written
into the separate files and situations can happen where the version numbers
contain an underscore (`_'). However, this character is a methematical
character in LaTeX, causing LaTeX to complain and abort.
With this commit, a step has been added at the end of the configure script
to convert any possible `_' to `\_'. Once it is commented (a backslash is
put behind it), the underscore will be printed as it is in the final PDF.
This commit was originally written by Mohammad Akhlaghi
|
|
Until now, the M4 that was built on macOS had internal problems (as
discussed in #1): it would simply print `Abort trap: 6' in the output and
abort. After looking at the build of Homebrew, I noticed that they apply a
patch (correct one line) to fix this problem. To be able to apply that
patch on macOS systems, I had fully open up the build recipe of M4 and
atleast on the testing system, it was built successfully.
Also, after successfully building M4, and thus Autoconf and thus Minizip,
we were able to build XLSX I/O on a macOS and found out that the internal
library's full address wasn't being put in the libraries and
executables. With this commit, we now use macOS's `install_name_tool' to
correct the positions of the two `libxlsxio_*' libraries in all its
executables.
This commit was originally written by Mohammad Akhlaghi
|
|
Until this commit, only the word `Minizip' was written into the Minizip
installation target (without the version number of Minizip). With this
commit, this minor bug has been fixed by using the appropiate Make
variable: `$(minizip-version)'.
|
|
Minizip is a dependency of XLSX I/O and until now, I was just using the
most recent version I found (2.9.2), but XLSX I/O is written for the
Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my
computer!!! I think XLSX I/O's CMake is instructed to look into system
directories by default when it doesn't find the directories in the given
places. And because I had installed Minizip on my operating system, it
did't complain.
Upon trying the build on their systems, Yahya, Raul and Zahra reported a
failure in the build of XLSX I/O which was due the to the problem above (we
were installing the wrong version of Minizip!).
With this commit, this has been fixed by installing the 1.x series of
Minizip (whish is actually installed within zlib!).
This commit was original done by Mohammad Akhlaghi.
|
|
With this commit, CMake has been updated to its most recent version.
This upgrade has been done because in the installation of XLSX I/O on
macOS laptop, it crashes complaining about C compiler "not able to
compile a simple test program". After a fast search, I found it could be
possible to just use the most recent version of CMake to solve the
problem. But it didn't work. In any case, it is good to have the most
recent version of CMake included.
|
|
Until this commit, the year of this paper was 2019 and the linking url
was the temporal one. However, the final official publication year is
2020. With this commit, the year and the url have been changed to the
final ones.
|
|
With this commit, multiples tabs in the definition of MissFITS tarball
have been removed. Now they are white spaces.
|
|
Until this commit, PyYAML was not set as prerequisite of Astropy. This
package is an optional dependency of Astropy for some particular
functions. However, we have already included PyYAML into this project so
it is available. With this commit, PyYAML has been set as a prerequisite
of Astropy.
In addition to this, Html5lib and Beautifulsoup4 have been also added as
prerequsites of Astropy (and removed from Astroquery prerequisites). I
noticed that both of them are optional dependencies of Astropy.
|
|
In the last update of Astropy to version 4.0 they removed some things
that the previous version of Astroquery needs. As a consequence, it is
also necessary to update the Astroquery version to be a ble to run with
the Astropy 4.0. With this commit, the update of Astroquery to it most
recent version (0.4) has been done.
|
|
Until this commit, the small section of `README-hacking.md' in which it
is explained how to do the first configuration of Git was at the
beginning of the section `First custom commit'. However, it is better to
have it just before the item `Your first commit' in that section. With
this commit, this change has been done. Now the reader has the necessary
steps for configuring Git just before it is needed for making the first
commit.
|
|
Since I (Raul) did some changes (and I hope to do more :-)) in the
`README-hacking.md', I am adding my information at the beginning of this
file.
|
|
Until this commit, we were asuming that Git was already properly
configured. However, in order to be as complete as possible, it would
be good if the basic commands to configure Git were in the
`README-hacking.md'. With this commit, a small paragraph has been added
in order to have the basic Git configuration commands (i.e. to configure
the name, email, and favorite text editor).
|
|
The "SDSS extended PSFs" paper was already included as an example of
papers wich uses this template. However, the reference was the arXiv
one. With this commit, since the paper has been finally published, it
has been added the final reference to the journal.
|
|
Until this commit, the checking of X11 installation done to ensure that
it is already available in the host system was crashing in macOS
systems. The reason is that the place of the X11 libraries use to be
`/opt/X11/lib' in macOS systems. With this commit, this issue has been
fixed by adding this directory to the LDFLAGS.
|
|
Newer versions of Astropy package has been released. With this commit,
it has been updated. It has been increased from v3.2.1 to v4.0
|
|
Until this commit, the number `2' was missing in the checksum variable
name of that library. It was `libxml-checksum' but it should be
`libxml2-checksum'. With this commit, this issue has been fixed.
|
|
An extra backslash in the prerequisites of Jeepney Python package was
causing a crash in the installation of that software. With this commit,
this problem has been fixed by removing the backslash.
|
|
These two packages are necessary to build the GNU C Library.
|
|
Perl is necessary to build Texinfo and later to build LaTeX. Until now we
were just using the host operating system's installation of Perl, but in
some instances that Perl can be too old and not suppor the features
necessary. With this commit, Perl is now built from source during the basic
installation step of the template.
This was reported by Idafen Santana Pérez, after trying the pipeline on an
Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
|
|
Raul's paper (that uses this template) was just published on arXiv today
(congratulations Raul!). So it has been added to the list of papers using
this template.
|
|
Since we got the RDA Adoption grant, it was necessary to add it in the
acknowledgements.
|
|
When building the log4cxx tarball from its Git history, I noticed that
files with very long names are not packaged by tar (because by default
Automake uses the ancient v7 tar format that only supports file names less
than 99 characters).
So I build the tarball with the `tar-ustar' option to Automake (by
modifying the log4cxx source) and the resulting tarball was able to compile
and run successfully. This has been described above the rule to build
log4cxx and I also sent an email to their developing mailing list to inform
them of this problem. If they address it, I will remove the note on the
necessary corrections.
|
|
Some minor corrections were made in the template:
- When making the distribution, `.swp' files (created by Vim) are also
removed.
- Autoconf is set as a prerequisite of Automake
I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball
needs some patches, so I have just left it half done until someone actually
needs it and we apply the patch.
|
|
Since adding this new step, I had forgot to mention it in the checklist of
`README-hacking.md'. It is added with this commit.
|
|
Until now, the tarballs were the first normal prerequisite of the
software. As a result if their date changed, the whole software would be
re-built. However, for tarballs specifically, we actually check their
contents with a checksum, so their date is irrelevant (if its newer than
the built program, but has the same checksum, there is no need to re-build
the software).
Also, calling the tarball name as an argument to the building process (for
example `gbuild') was redundant. It is now automatically found from the
list of order-only prerequisites within `gbuild' and `cbuild' (similar to
how it was previously found in the `pybuild' for Python building).
A `README.md' file has also been placed in `reproduce/software/make' to
help describe the shared properties of the software building
Makefiles. This will hopefully grow much larger in the future.
|
|
Python's `lmfit' module and all its major dependencies (`asteval',
`corner', `emcee' and `uncertainties') have been included in the template.
While doing this I noticed that if the tarballs are the last prerequisite
of each software building rule, then when building in parallel, the
template will immediately start building packages as soon as the first one
is downloaded. Not like the current way that it will attempt to download
several, then start building. For now, this has been implemented in the
Python build rules for all the modules and we'll later do the same for the
other programs and libraries. This also motivated a simplification of the
`pybuild' function: it now internally looks into the prerequisites and
selects the tarball from the prerequisite that is in the tarballs
directory.
This isn't a problem for the build, but I just don't understand why Python
can't recognize the version of `emcee', Python reads the version of `emcee'
as `0.0.0'! But it doesn't cause any crash in the build, so for now its
fine.
|
|
The part on using shared memory was edited for a few things that weren't
clear.
|
|
Some typos were fixed.
|
|
The edits help it be more clear, and remind the reader to delete any
remaining file in the RAM in the end.
|
|
When you are working with large files and there is some good RAM in the
system (large/powerful computers), it is beneficial to work in the shared
memory directory and not the actual persistent storage (like HDD or
SSD).
With this commit, a fully working demo has been added to
`README-hacking.md' (under the tips of "Make programming") to show how to
effectively work in situations like this.
|
|
The tarball of HEALPix includes multiple languages and doesn't include the
ready-to-run GNU Build System by default, we actually have to build the
`./configure' script for the C/C++ libraries. So it was necessary to also
include GNU Autoconf and GNU Automake as prerequisites of HEALPix.
However, the official GNU Autoconf tarball (dating from 2012) doesn't build
on modern systems, so I just cloned it from its source and bootstrapped it
and built its modern tarball which we are using here.
|
|
The following software are added with this commit: eigency, esutil, flake8,
future, galsim, lsstdesccoord, pybind11 and pyflakes.
|
|
As part of an effort to bring in all the dependencies of the LSST Science
pipeline (which includes the last commit), these software are now available
in the template.
|
|
With this commit these three software packages are now installable with
this template.
|
|
The steps to package the project have been made slightly more clear and
also the temporary directory that is created for packaging is deleted after
the tarball is made.
|
|
Until now, when you ran `make clean', all the directories under
`$(BDIR)/tex/' would be deleted except for `macros' and `build'. This was
good for the single-user mode. But in group mode, this would delete the
user-specific TeX build directory because its called `build-USER', not
`build'.
With this commit, to fix the problem, we define the new `texbtopdir' and
based on the group condition, and use that to specify which directory to
not delete.
|
|
Carlos Morales Socorro reported that his LaTeX build was missing the
`trimspaces' package, so it is now included in the pipeline.
|
|
Until now, some software were using the depreciated ADS URL
(`http://adsabs.harvard.edu....') and some were using the modern one
(`http://ui.adsabs.harvard.edu').
With this commit, to be consistent they all link to the modern URL.
|
|
Until now, this script would always only work with a file-lock. But in some
scenarios, we might want to download in parallel. For example when the
system has multiple ports to the internet.
With this commit, we have added this feature: when the lockfile name is
`nolock', it won't lock and will download in parallel.
|
|
Since ImageMagick can take long to build, we are now building it in
parallel. Also, the part where we replace an `_' with `\_' in the software
version at the end of the configure script was removed. It is more
clear/readable that the actual rule that includes such a name deals with
the underline (as is the case for `sip_tpv' which already dealt with it).
Finally, I noticed that the checks at the start of `top-prepare' were
missing new-lines. I had forgot that the Make single-shell variable isn't
activated in this stage yet.
|
|
A special directory is now defined in `initialize.mk' that can be used in
both the preparation and build phases. Also, the contents of prepared
results can now be conditionally read during `./project make'.
|
|
In many real-world scenarios, `./project make' can really benefit from
having some basic information about the data before being run. For example
when quering a server. If we know how many datasets were downloaded and
their general properties, it can greatly optmize the process when we are
designing the solution to be run in `./project make'.
Therefore with this commit, a new phase has been added to the template's
design: `./project prepare'. In the raw template this is empty, because the
simple analysis done in the template doesn't warrant it. But everything is
ready for projects using the template to add preparation phases prior to
the analysis.
|
