diff options
Diffstat (limited to 'reproduce/software/bash')
| -rwxr-xr-x | reproduce/software/bash/bashrc.sh | 45 | ||||
| -rwxr-xr-x | reproduce/software/bash/configure.sh | 1407 | ||||
| -rwxr-xr-x | reproduce/software/bash/git-post-checkout | 66 | ||||
| -rwxr-xr-x | reproduce/software/bash/git-pre-commit | 83 |
4 files changed, 0 insertions, 1601 deletions
diff --git a/reproduce/software/bash/bashrc.sh b/reproduce/software/bash/bashrc.sh deleted file mode 100755 index b2a151f..0000000 --- a/reproduce/software/bash/bashrc.sh +++ /dev/null @@ -1,45 +0,0 @@ -# Bash startup file for better control of project environment. -# -# To have better control over the environment of each analysis step (Make -# recipe), besides having environment variables (directly included from -# Make), it may also be useful to have a Bash startup file (this file). All -# of the Makefiles set this file as the `BASH_ENV' environment variable, so -# it is loaded into all the Make recipes within the project. -# -# The special `PROJECT_STATUS' environment variable is defined in every -# top-level Makefile of the project. It defines the the state of the Make -# that is calling this script. It can have three values: -# -# configure_basic -# --------------- -# When doing basic configuration, therefore the executed steps cannot -# make any assumptions about the version of Bash (or any other -# program). Therefore it is important for any step in this step to be -# highly portable. -# -# configure_highlevel -# ------------------- -# When building the higher-level programs, so the versions of the -# most basic tools are set and you may safely assume certain -# features. -# -# make -# ---- -# When doing the project's analysis: all software have known -# versions. -# -# -# Copyright (C) 2019-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org> -# -# This script is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This script is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# A copy of the GNU General Public License is available at -# <http://www.gnu.org/licenses/>. diff --git a/reproduce/software/bash/configure.sh b/reproduce/software/bash/configure.sh deleted file mode 100755 index a6fbc4e..0000000 --- a/reproduce/software/bash/configure.sh +++ /dev/null @@ -1,1407 +0,0 @@ -#! /bin/sh -# -# Necessary preparations/configurations for the reproducible project. -# -# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org> -# -# This script is free software: you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the -# Free Software Foundation, either version 3 of the License, or (at your -# option) any later version. -# -# This script is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -# Public License for more details. -# -# A copy of the GNU General Public License is available at -# <http://www.gnu.org/licenses/>. - - -# Script settings -# --------------- -# Stop the script if there are any errors. -set -e - - - - - -# Internal directories -# -------------------- -# -# These are defined to help make this script more readable. -topdir=$(pwd) -optionaldir="/optional/path" -adir=reproduce/analysis/config -cdir=reproduce/software/config - -sbdir=$cdir/installation - -pconf=$sbdir/LOCAL.conf -ptconf=$sbdir/LOCAL_tmp.conf -poconf=$sbdir/LOCAL_old.conf -depverfile=$cdir/installation/versions.conf -depshafile=$cdir/installation/checksums.conf -# --------- Delete for no Gnuastro --------- -glconf=$cdir/gnuastro/gnuastro-local.conf -# ------------------------------------------ - - - - - -# Notice for top of generated files -# --------------------------------- -# -# In case someone opens the files output from the configuration scripts in -# a text editor and wants to edit them, it is important to let them know -# that their changes are not going to be permenant. -create_file_with_notice () -{ - if echo "# IMPORTANT: file can be RE-WRITTEN after './project configure'" > "$1" - then - echo "#" >> "$1" - echo "# This file was created during configuration" >> "$1" - echo "# ('./project configure'). Therefore, it is not under" >> "$1" - echo "# version control and any manual changes to it will be" >> "$1" - echo "# over-written if the project re-configured." >> "$1" - echo "#" >> "$1" - else - echo; echo "Can't write to $1"; echo; - exit 1 - fi -} - - - - - -# Get absolute address -# -------------------- -# -# Since the build directory will go into a symbolic link, we want it to be -# an absolute address. With this function we can make sure of that. -absolute_dir () -{ - if stat "$1" 1> /dev/null; then - echo "$(cd "$(dirname "$1")" && pwd )/$(basename "$1")" - else - exit 1; - fi -} - - - - - -# Check for C/C++ compilers -# ------------------------- -# -# To build the software, we'll need some basic tools (the compilers in -# particular) to be present. -hascc=0; -if type cc > /dev/null 2>/dev/null; then - if type c++ > /dev/null 2>/dev/null; then export CC=cc; hascc=1; fi -else - if type gcc > /dev/null 2>/dev/null; then - if type g++ > /dev/null 2>/dev/null; then export CC=gcc; hascc=1; fi - else - if type clang > /dev/null 2>/dev/null; then - if type clang++ > /dev/null 2>/dev/null; then export CC=clang; hascc=1; fi - fi - fi -fi -if [ $hascc = 0 ]; then - cat <<EOF -______________________________________________________ -!!!!!!! C/C++ Compiler NOT FOUND !!!!!!! - -To build the project's software, the host system needs to have basic C and -C++ compilers. The executables that were checked are 'cc', 'gcc' and -'clang' for a C compiler, and 'c++', 'g++' and 'clang++' for a C++ -compiler. If you have a relevant compiler that is not checked, please get -in touch with us (with the form below) so we add it: - - https://savannah.nongnu.org/support/?func=additem&group=reproduce -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - exit 1 -fi - - - - - -# Special directory for compiler testing -# -------------------------------------- -# -# This directory will be deleted when the compiler testing is finished. -compilertestdir=.compiler_test_dir_please_delete -if ! [ -d $compilertestdir ]; then mkdir $compilertestdir; fi - - - - - -# Check C compiler -# ---------------- -gcc_works=0 -testprog=$compilertestdir/test -testsource=$compilertestdir/test.c -echo; echo; echo "Checking host C compiler..."; -cat > $testsource <<EOF -#include <stdio.h> -#include <stdlib.h> -int main(void){printf("...C compiler works.\n"); - return EXIT_SUCCESS;} -EOF -if $CC $testsource -o$testprog && $testprog; then - rm $testsource $testprog -else - rm $testsource - cat <<EOF - -______________________________________________________ -!!!!!!! C compiler doesn't work !!!!!!! - -Host C compiler ('gcc') can't build a simple program. - -A working C compiler is necessary for building the project's software. -Please use the error message above to find a good solution and re-run the -project configuration. - -If you can't find a solution, please send the error message above to the -link below and we'll try to help - -https://savannah.nongnu.org/support/?func=additem&group=reproduce - -TIP: Once you find the solution, you can use the '-e' option to use -existing configuration: - - $ ./project configure -e - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - exit 1 -fi - - - - - -# See if the linker accepts -Wl,-rpath-link -# ----------------------------------------- -# -# `-rpath-link' is used to write the information of the linked shared -# library into the shared object (library or program). But some versions of -# LLVM's linker don't accept it an can cause problems. -cat > $testsource <<EOF -#include <stdio.h> -#include <stdlib.h> -int main(void) {return EXIT_SUCCESS;} -EOF -if $CC $testsource -o$testprog -Wl,-rpath-link 2>/dev/null > /dev/null; then - export rpath_command="-Wl,-rpath-link=$instdir/lib" -else - export rpath_command="" -fi -rm -f $testprog $testsource - - - - - -# See if we need the dynamic-linker (-ldl) -# ---------------------------------------- -# -# Some programs (like Wget) need dynamic loading (using `libdl'). On -# GNU/Linux systems, we'll need the `-ldl' flag to link such programs. But -# Mac OS doesn't need any explicit linking. So we'll check here to see if -# it is present (thus necessary) or not. -cat > $testsource <<EOF -#include <stdio.h> -#include <dlfcn.h> -int -main(void) { - void *handle=dlopen ("/lib/CEDD_LIB.so.6", RTLD_LAZY); - return 0; -} -EOF -if $CC $testsource -o$testprog 2>/dev/null > /dev/null; then - needs_ldl=no; -else - needs_ldl=yes; -fi -rm -f $testprog $testsource - - - - - -# See if the C compiler can build static libraries -# ------------------------------------------------ - -# We are manually only working with shared libraries: because some -# high-level programs like Wget and cURL need dynamic linking and if we -# build the libraries statically, our own builds will be ignored and these -# programs will go and find their necessary libraries on the host system. -# -# Another good advantage of shared libraries is that we can actually use -# the shared library tool of the system (`ldd' with GNU C Library) and see -# exactly where each linked library comes from. But in static building, -# unless you follow the build closely, its not easy to see if the source of -# the library came from the system or our build. -static_build=no - - - - - -# If we are on a Mac OS system -# ---------------------------- -# -# For the time being, we'll use the existance of `otool' to see if we are -# on a Mac OS system or not. Some tools (for example OpenSSL) need to know -# this. -# -# On Mac OS, the building of GCC crashes sometimes while building libiberty -# with CLang's `g++'. Until we find a solution, we'll just use the host's C -# compiler. -if type otool > /dev/null 2>/dev/null; then - host_cc=1 - on_mac_os=yes -else - host_cc=0 - on_mac_os=no -fi - - - - - -# Necessary C library element positions -# ------------------------------------- -# -# On some systems (in particular Debian-based OSs), the static C library -# and necessary headers in a non-standard place, and we can't build GCC. So -# we need to find them first. The `sys/cdefs.h' header is also in a -# similarly different location. -sys_cpath="" -sys_library_path="" -if [ x"$$on_mac_os" != xyes ]; then - - # Get the GCC target name of the compiler, when its given, special - # C libraries and headers are in a sub-directory of the host. - gcctarget=$(gcc -v 2>&1 \ - | tr ' ' '\n' \ - | awk '/\-\-target/' \ - | sed -e's/\-\-target=//') - if [ x"$gcctarget" != x ]; then - if [ -f /usr/lib/$gcctarget/libc.a ]; then - export sys_library_path=/usr/lib/$gcctarget - export sys_cpath=/usr/include/$gcctarget - fi - fi - - # For a check: - #echo "sys_library_path: $sys_library_path" - #echo "sys_cpath: $sys_cpath" -fi - - - - - -# See if a link-able static C library exists -# ------------------------------------------ -# -# After building GCC, we must use PatchELF to correct its RPATHs. However, -# PatchELF links internally with `libstdc++'. So a dynamicly linked -# PatchELF cannot be used to correct the links to `libstdc++' in general -# (on some systems this causes no problem, but on others it doesn't!). -# -# However, to build a Static PatchELF, we need to be able to link with the -# static C library, which is not always available on some GNU/Linux -# systems. Therefore we need to check this here. If we can't build a static -# PatchELF, we won't build any GCC either. -if [ x"$host_cc" = x0 ]; then - echo; echo; echo "Checking if static C library is available..."; - cat > $testsource <<EOF -#include <stdio.h> -#include <stdlib.h> -#include <sys/cdefs.h> -int main(void){printf("...yes\n"); - return EXIT_SUCCESS;} -EOF - cc_call="$CC $testsource $CPPFLAGS $LDFLAGS -o$testprog -static -lc" - if $cc_call && $testprog; then - gccwarning=0 - good_static_libc=1 - rm $testsource $testprog - else - echo; echo "Compilation command:"; echo "$cc_call" - good_static_libc=0 - rm $testsource - gccwarning=1 - host_cc=1 - cat <<EOF - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!! Warning !!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -The 'sys/cdefs.h' header cannot be included, or a usable static C library -('libc.a', in any directory) cannot be used with the current settings of -this system. SEE THE ERROR MESSAGE ABOVE. - -Because of this, we can't build GCC. You either 1) don't have them, or 2) -the default system environment aren't enough to find them. - -1) If you don't have them, your operating system provides them as separate -packages that you must manually install. Please look into your operating -system documentation or contact someone familiar with it. For example on -some Redhat-based GNU/Linux distributions, the static C library package can -be installed with this command: - - $ sudo yum install glibc-static - -2) If you have 'libc.a' and 'sys/cdefs.h', but in a non-standard location (for -example in '/PATH/TO/STATIC/LIBC/libc.a' and -'/PATH/TO/SYS/CDEFS_H/sys/cdefs.h'), please run the commands below, then -re-configure the project to fix this problem. - - $ export LDFLAGS="-L/PATH/TO/STATIC/LIBC \$LDFLAGS" - $ export CPPFLAGS="-I/PATH/TO/SYS/CDEFS_H \$LDFLAGS" - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - fi -fi - -# Print a warning if GCC is not meant to be built. -if [ x"$gccwarning" = x1 ]; then - cat <<EOF - -PLEASE SEE THE WARNINGS ABOVE. - -Since GCC is pretty low-level, this configuration script will continue in 5 -seconds and use your system's C compiler (it won't build a custom GCC). But -please consider installing the necessary package(s) to complete your C -compiler, then re-run './project configure'. - -EOF - sleep 5 -fi - - - - - -# Fortran compiler -# ---------------- -# -# If GCC is ultimately build within the project, the user won't need to -# have a fortran compiler, we'll build it internally for high-level -# programs. However, when the host C compiler is to be used, the user needs -# to have a Fortran compiler available. -if [ $host_cc = 1 ]; then - - # See if a Fortran compiler exists. - hasfc=0; - if type gfortran > /dev/null 2>/dev/null; then hasfc=1; fi - if [ $hasfc = 0 ]; then - cat <<EOF -______________________________________________________ -!!!!!!! Fortran Compiler NOT FOUND !!!!!!! - -Because the project won't be building its own GCC (which includes a Fortran -compiler), you need to have a Fortran compiler available. Fortran is -commonly necessary for many lower-level scientific programs. Currently we -search for 'gfortran'. If you have a Fortran compiler that is not checked, -please get in touch with us (with the form below) so we add it: - - https://savannah.nongnu.org/support/?func=additem&group=reproduce - -Note: GCC will not be built because you are either using the '--host-cc' -option, or you are using an operating system that currently has bugs when -building GCC. -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - exit 1 - fi - - # See if the Fortran compiler works - testsource=$compilertestdir/test.f - echo; echo; echo "Checking host Fortran compiler..."; - echo " PRINT *, \"... Fortran Compiler works.\"" > $testsource - echo " END" >> $testsource - if gfortran $testsource -o$testprog && $testprog; then - rm $testsource $testprog - else - rm $testsource - cat <<EOF - -______________________________________________________ -!!!!!!! Fortran compiler doesn't work !!!!!!! - -Host Fortran compiler ('gfortran') can't build a simple program. - -A working Fortran compiler is necessary for building some of the project's -software. Please use the error message above to find a good solution and -re-run the project configuration. - -If you can't find a solution, please send the error message above to the -link below and we'll try to help - -https://savannah.nongnu.org/support/?func=additem&group=reproduce - -TIP: Once you find the solution, you can use the '-e' option to use -existing configuration: - - $ ./project configure -e - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - exit 1 - fi -fi - - - - - -# Delete the compiler testing directory -# ------------------------------------- -# -# This directory was made above to make sure the necessary compilers can be -# run. -rm -rf $compilertestdir - - - - - -# Inform the user -# --------------- -# -# Print some basic information so the user gets a feeling of what is going -# on and is prepared on what will happen next. -cat <<EOF - ------------------------------ -Project's local configuration ------------------------------ - -Local configuration includes things like top-level directories, or -processing steps. It is STRONGLY recommended to read the comments, and set -the best values for your system (where necessary). - -EOF - - - - - -# What to do with possibly existing configuration file -# ---------------------------------------------------- -# -# `LOCAL.conf' is the top-most local configuration for the project. If it -# already exists when this script is run, we'll make a copy of it as backup -# (for example the user might have ran `./project configure' by mistake). -printnotice=yes -rewritepconfig=yes -rewritegconfig=yes -if [ -f $pconf ] || [ -f $glconf ]; then - if [ $existing_conf = 1 ]; then - printnotice=no - if [ -f $pconf ]; then rewritepconfig=no; fi - if [ -f $glconf ]; then rewritegconfig=no; fi - fi -fi - - - - -# Make sure the group permissions satisfy the previous configuration (if it -# exists and we don't want to re-write it). -if [ $rewritepconfig = no ]; then - oldgroupname=$(awk '/GROUP-NAME/ {print $3; exit 0}' $pconf) - if [ "x$oldgroupname" = "x$reproducible_paper_group_name" ]; then - just_a_place_holder_to_avoid_not_equal_test=1; - else - echo "-----------------------------" - echo "!!!!!!!! ERROR !!!!!!!!" - echo "-----------------------------" - if [ "x$oldgroupname" = x ]; then - status="NOT configured for groups" - confcommand="./project configure" - else - status="configured for '$oldgroupname' group" - confcommand="./project configure --group=$oldgroupname" - fi - echo "Project was previously $status!" - echo "Either enable re-write of this configuration file," - echo "or re-run this configuration like this:" - echo - echo " $confcommand"; echo - exit 1 - fi -fi - - - - - -# Identify the downloader tool -# ---------------------------- -# -# After this script finishes, we will have both Wget and cURL for -# downloading any necessary dataset during the processing. However, to -# complete the configuration, we may also need to download the source code -# of some necessary software packages (including the downloaders). So we -# need to check the host's available tool for downloading at this step. -if [ $rewritepconfig = yes ]; then - if type wget > /dev/null 2>/dev/null; then - name=$(which wget) - - # By default Wget keeps the remote file's timestamp, so we'll have - # to disable it manually. - downloader="$name --no-use-server-timestamps -O"; - elif type curl > /dev/null 2>/dev/null; then - name=$(which curl) - - # - cURL doesn't keep the remote file's timestamp by default. - # - With the `-L' option, we tell cURL to follow redirects. - downloader="$name -L -o" - else - cat <<EOF - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!! Warning !!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -Couldn't find GNU Wget, or cURL on this system. These programs are used for -downloading necessary programs and data if they aren't already present (in -directories that you can specify with this configure script). Therefore if -the necessary files are not present, the project will crash. - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - downloader="no-downloader-found" - fi; -fi - - - - - -# Build directory -# --------------- -if [ $rewritepconfig = yes ]; then - cat <<EOF - -=============== -Build directory -=============== - -The project's "source" (this directory) and "build" directories are treated -separately. This greatly helps in managing the many intermediate files that -are created during the build. The intermediate build files don't need to be -archived or backed up: you can always re-build them with the contents of -the source directory. The build directory also needs a relatively large -amount of free space (atleast serveral Giga-bytes), while the source -directory (all plain text) will usually be a mega-byte or less. - -'.build' (a symbolic link to the build directory) will also be created -during this configuration. It can help encourage you to set the actual -build directory in a very different address from this one (one that can be -deleted and has large volume), while having easy access to it from here. - ---- CAUTION --- -Do not choose any directory under the top source directory (this -directory). The build directory cannot be a subdirectory of the source. ---------------- - -EOF - bdir= - currentdir=$(pwd) - junkname=pure-junk-974adfkj38 - while [ x$bdir = x ] - do - # Ask the user (if not already set on the command-line). - if [ x"$build_dir" = x ]; then - read -p"Please enter the top build directory: " build_dir - fi - - # If it exists, see if we can write in it. If not, try making it. - if [ -d $build_dir ]; then - if mkdir $build_dir/$junkname 2> /dev/null; then - instring="the already existing" - bdir=$(absolute_dir $build_dir) - rm -rf $build_dir/$junkname - else - echo " -- Can't write in '$build_dir'"; echo - fi - else - if mkdir $build_dir 2> /dev/null; then - instring="the newly created" - bdir=$(absolute_dir $build_dir) - else - echo " -- Can't create '$build_dir'"; echo - fi - fi - - # If its given, make sure it isn't a subdirectory of the source - # directory. - if ! [ x"$bdir" = x ]; then - echo "Given build directory: $bdir" - if echo "$bdir/" \ - | grep '^'$currentdir 2> /dev/null > /dev/null; then - - # If it was newly created, it will be empty, so delete it. - if ! [ "$(ls -A $bdir)" ]; then rm --dir $bdir; fi - - # Inform the user that this is not acceptable and reset `bdir'. - bdir= - echo " -- The build-directory cannot be under the source-directory." - echo " Please specify another build-directory that is outside of the source." - echo "" - else - echo " -- Build directory set to ($instring): '$bdir'" - fi - fi - - # Reset `build_dir' to blank, so it continues asking when the - # previous value wasn't usable. - build_dir= - done -fi - - - - - -# Input directory -# --------------- -if [ x"$input_dir" = x ]; then - indir=$optionaldir -else - indir=$input_dir -fi -wfpc2name=$(awk '!/^#/ && $1=="WFPC2IMAGE" {print $3}' $adir/INPUTS.conf) -wfpc2md5=$(awk '!/^#/ && $1=="WFPC2MD5" {print $3}' $adir/INPUTS.conf) -wfpc2size=$(awk '!/^#/ && $1=="WFPC2SIZE" {print $3}' $adir/INPUTS.conf) -wfpc2url=$(awk '!/^#/ && $1=="WFPC2URL" {print $3}' $adir/INPUTS.conf) -if [ $rewritepconfig = yes ] && [ x"$input_dir" = x ]; then - cat <<EOF - ----------------------------------- -(OPTIONAL) Input dataset directory ----------------------------------- - -This project needs the dataset(s) listed below. If you already have them, -please specify the directory hosting them on this system. If you don't, -they will be downloaded automatically. Each file is shown with its total -volume and its 128-bit MD5 checksum in parenthesis. - - $wfpc2name ($wfpc2size, $wfpc2md5): - A 100x100 Hubble Space Telescope WFPC II image used in the FITS - standard webpage as a demonstration of this file format. - URL: $wfpc2url/$wfpc2name - -NOTE I: This directory, or the datasets above, are optional. If it doesn't -exist, the files will be downloaded in the build directory and used. - -NOTE II: This directory (if given) will only be read, nothing will be -written into it, so no writing permissions are necessary. - -TIP: If you have these files in multiple directories on your system and -don't want to download them or make duplicates, you can create symbolic -links to them and put those symbolic links in the given top-level -directory. - -EOF - read -p"(OPTIONAL) Input datasets directory ($indir): " inindir - if [ x$inindir != x ]; then - indir=$inindir - echo " -- Using '$indir'" - fi -fi - - - - - -# Dependency tarball directory -# ---------------------------- -if [ x"$software_dir" = x ]; then - ddir=$optionaldir -else - ddir=$software_dir -fi -if [ $rewritepconfig = yes ] && [ x"$software_dir" = x ]; then - cat <<EOF - ---------------------------------------- -(OPTIONAL) Software tarball directory ---------------------------------------- - -To ensure an identical build environment, the project will use its own -build of the programs it needs. Therefore the tarball of the relevant -programs are necessary. If a tarball isn't present in the specified -directory, *IT WILL BE DOWNLOADED* automatically. - -If you don't specify any directory here, or it doesn't contain the tarball -of a dependency, it is necessary to have an internet connection. The -project will download the tarballs it needs automatically. - -EOF - read -p"(OPTIONAL) Directory of dependency tarballs ($ddir): " tmpddir - if [ x"$tmpddir" != x ]; then - ddir=$tmpddir - echo " -- Using '$ddir'" - fi -fi - - - - - -# Write the parameters into the local configuration file. -if [ $rewritepconfig = yes ]; then - - # Add commented notice. - create_file_with_notice $pconf - - # Write the values. - sed -e's|@bdir[@]|'"$bdir"'|' \ - -e's|@indir[@]|'"$indir"'|' \ - -e's|@ddir[@]|'"$ddir"'|' \ - -e's|@sys_cpath[@]|'"$sys_cpath"'|' \ - -e's|@downloader[@]|'"$downloader"'|' \ - -e's|@groupname[@]|'"$reproducible_paper_group_name"'|' \ - $pconf.in >> $pconf -else - # Read the values from existing configuration file. - inbdir=$(awk '$1=="BDIR" {print $3}' $pconf) - - # Read the software directory. - ddir=$(awk '$1=="DEPENDENCIES-DIR" {print $3}' $pconf) - - # The downloader command may contain multiple elements, so we'll just - # change the (in memory) first and second tokens to empty space and - # write the full line (the original file is unchanged). - downloader=$(awk '$1=="DOWNLOADER" {$1=""; $2=""; print $0}' $pconf) - - # Make sure all necessary variables have a value - err=0 - verr=0 - novalue="" - if [ x"$inbdir" = x ]; then novalue="BDIR, "; fi - if [ x"$downloader" = x ]; then novalue="$novalue"DOWNLOADER; fi - if [ x"$novalue" != x ]; then verr=1; err=1; fi - - # Make sure `bdir' is an absolute path and it exists. - berr=0 - ierr=0 - bdir=$(absolute_dir $inbdir) - - if ! [ -d $bdir ]; then if ! mkdir $bdir; then berr=1; err=1; fi; fi - if [ $err = 1 ]; then - cat <<EOF - -################################################################# -######## ERORR reading existing configuration file ############ -################################################################# -EOF - if [ $verr = 1 ]; then - cat <<EOF - -These variables have no value: $novalue. -EOF - fi - if [ $berr = 1 ]; then - cat <<EOF - -Couldn't create the build directory '$bdir' (value to 'BDIR') in -'$pconf'. -EOF - fi - - cat <<EOF - -Please run the configure script again (accepting to re-write existing -configuration file) so all the values can be filled and checked. -################################################################# -EOF - fi -fi - - - - - -# --------- Delete for no Gnuastro --------- -# Get the version of Gnuastro that must be used. -gversion=$(awk '$1=="gnuastro-version" {print $NF}' $depverfile) - -# Gnuastro's local configuration settings -if [ $rewritegconfig = yes ]; then - create_file_with_notice $glconf - echo "# Minimum number of bytes to use HDD/SSD instead of RAM." >> $glconf - echo " minmapsize $minmapsize" >> $glconf - echo >> $glconf - echo "# Version of Gnuastro that must be used." >> $glconf - echo " onlyversion $gversion" >> $glconf -else - ingversion=$(awk '$1=="onlyversion" {print $NF}' $glconf) - if [ x$ingversion != x$gversion ]; then - cat <<EOF -______________________________________________________ -!!!!!!!!!!!!!!!!!!CONFIGURATION ERROR!!!!!!!!!!!!!!!!! - -Gnuastro's version in '$glconf' ($ingversion) doesn't match the tarball -version that this project was designed to use in '$depverfile' -($gversion). Please re-run after removing the former file: - - $ rm $glconf - $ ./project configure - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF - exit 1 - fi -fi -# ------------------------------------------ - - - - - -# Delete final configuration target -# --------------------------------- -# -# We only want to start running the project later if this script has -# completed successfully. To make sure it hasn't crashed in the middle -# (without the user noticing), in the end of this script we make a file and -# we'll delete it here (at the start). Therefore if the script crashed in -# the middle that file won't exist. -sdir=$bdir/software -finaltarget=$sdir/configuration-done.txt -if ! [ -d $sdir ]; then mkdir $sdir; fi -rm -f $finaltarget - - - - - -# Project's top-level directories -# ------------------------------- -# -# These directories are possibly needed by many steps of process, so to -# avoid too many directory dependencies throughout the software and -# analysis Makefiles (thus making them hard to read), we are just building -# them here -# Software tarballs -tardir=$sdir/tarballs -if ! [ -d $tardir ]; then mkdir $tardir; fi - -# Installed software -instdir=$sdir/installed -if ! [ -d $instdir ]; then mkdir $instdir; fi - -# To record software versions and citation. -verdir=$instdir/version-info -if ! [ -d $verdir ]; then mkdir $verdir; fi - -# Program and library versions and citation. -ibidir=$verdir/proglib -if ! [ -d $ibidir ]; then mkdir $ibidir; fi - -# Python module versions and citation. -ipydir=$verdir/python -if ! [ -d $ipydir ]; then mkdir $ipydir; fi - -# Used software BibTeX entries. -ictdir=$verdir/cite -if ! [ -d $ictdir ]; then mkdir $ictdir; fi - -# TeXLive versions. -itidir=$verdir/tex -if ! [ -d $itidir ]; then mkdir $itidir; fi - -# Top-level LaTeX. -texdir=$bdir/tex -if ! [ -d $texdir ]; then mkdir $texdir; fi - -# LaTeX macros. -mtexdir=$texdir/macros -if ! [ -d $mtexdir ]; then mkdir $mtexdir; fi - - -# TeX build directory. If built in a group scenario, the TeX build -# directory must be separate for each member (so they can work on their -# relevant parts of the paper without conflicting with each other). -if [ "x$reproducible_paper_group_name" = x ]; then - texbdir=$texdir/build -else - user=$(whoami) - texbdir=$texdir/build-$user -fi -if ! [ -d $texbdir ]; then mkdir $texbdir; fi - -# TiKZ (for building figures within LaTeX). -tikzdir=$texbdir/tikz -if ! [ -d $tikzdir ]; then mkdir $tikzdir; fi - - -# Set the symbolic links for easy access to the top project build -# directories. Note that these are put in each user's source/cloned -# directory, not in the build directory (which can be shared between many -# users and thus may already exist). -# -# Note: if we don't delete them first, it can happen that an extra link -# will be created in each directory that points to its parent. So to be -# safe, we are deleting all the links on each re-configure of the project. -rm -f .build .local tex/build tex/tikz .gnuastro -ln -s $bdir .build -ln -s $instdir .local -ln -s $texdir tex/build -ln -s $tikzdir tex/tikz -# --------- Delete for no Gnuastro --------- -ln -s $topdir/reproduce/software/config/gnuastro .gnuastro -# ------------------------------------------ - - -# Temporary software un-packing/build directory: if the host has the -# standard `/dev/shm' mounting-point, we'll do it in shared memory (on the -# RAM), to avoid harming/over-using the HDDs/SSDs. The RAM of most systems -# today (>8GB) is large enough for the parallel building of the software. -# -# For the name of the directory under `/dev/shm' (for this project), we'll -# use the names of the two parent directories to the current/running -# directory, separated by a `-' instead of `/'. We'll then appended that -# with the user's name (in case multiple users may be working on similar -# project names). Maybe later, we can use something like `mktemp' to add -# random characters to this name and make it unique to every run (even for -# a single user). -tmpblddir=$sdir/build-tmp -rm -rf $tmpblddir/* $tmpblddir # If its a link, we need to empty its - # contents first, then itself. - -# Set the top-level shared memory location. -if [ -d /dev/shm ]; then shmdir=/dev/shm -else shmdir="" -fi - -# If a shared memory mounted directory exists and there is enough space -# there (in RAM), build a temporary directory for this project. -needed_space=2000000 -if [ x"$shmdir" != x ]; then - available_space=$(df $shmdir | awk 'NR==2{print $4}') - if [ $available_space -gt $needed_space ]; then - dirname=$(pwd | sed -e's/\// /g' \ - | awk '{l=NF-1; printf("%s-%s",$l, $NF)}') - tbshmdir=$shmdir/"$dirname"-$(whoami) - if ! [ -d $tbshmdir ]; then mkdir $tbshmdir; fi - fi -else - tbshmdir="" -fi - -# If a shared memory directory was created set `build-tmp' to be a -# symbolic link to it. Otherwise, just build the temporary build -# directory under the project build directory. -if [ x$tbshmdir = x ]; then mkdir $tmpblddir; -else ln -s $tbshmdir $tmpblddir; -fi - - - - - -# inform the user that the build process is starting -# ------------------------------------------------- -if [ $printnotice = yes ]; then - tsec=10 - cat <<EOF - -------------------------- -Building dependencies ... -------------------------- - -Necessary dependency programs and libraries will be built in $tsec sec. - -NOTE: the built software will NOT BE INSTALLED on your system (no root -access is required). They are only for local usage by this project. They -will be installed in: - - $sdir/installed - -**TIP**: you can see which software is being installed at every moment with -the following command. See "Inspecting status" section of -'README-hacking.md' for more. In short, run it while the project is being -configured (in another terminal, but on this same directory: 'pwd'): - - $ ./project --check-config - -------------------------- - -EOF - sleep $tsec -fi - - - - - -# Number of threads for basic builds -# ---------------------------------- -# -# Since the system might not have GNU Make at this stage, and other Make -# implementations can't deal with parallel build properly, we'll just -# default to 1 thread. This is because some versions of Make complain about -# not having enough 'pipe' (memory) on some systems. After some searching, -# I found out its because of too many threads. GNU Make will be present on -# GNU systems (that have `nproc', part of GNU Coreutils). So to simplify -# the test for GNU Make, we'll just try running `nproc'. -if which nproc &> /dev/null; then - if [ $jobs = 0 ]; then - numthreads=$(nproc --all); - else - numthreads=$jobs - fi -else - numthreads=1; -fi - - - - - -# Build `flock' before other program -# ---------------------------------- -# -# Flock (or file-lock) is a unique program that is necessary to serialize -# the (generally parallel) processing of make when necessary. GNU/Linux -# machines have it as part of their `util-linux' programs. But to be -# consistent in non-GNU/Linux systems, we will be using our own build. -# -# The reason that `flock' is sepecial is that we need it to serialize the -# download process of the software tarballs. -flockversion=$(awk '/flock-version/{print $3}' $depverfile) -flockchecksum=$(awk '/flock-checksum/{print $3}' $depshafile) -flocktar=flock-$flockversion.tar.gz -flockurl=http://github.com/discoteq/flock/releases/download/v$flockversion/ - -# Prepare/download the tarball. -if ! [ -f $tardir/$flocktar ]; then - flocktarname=$tardir/$flocktar - ucname=$flocktarname.unchecked - if [ -f $ddir/$flocktar ]; then - cp $ddir/$flocktar $ucname - else - if ! $downloader $ucname $flockurl/$flocktar; then - rm -f $ucname; - echo - echo "DOWNLOAD ERROR: Couldn't download the 'flock' tarball:" - echo " $flockurl" - echo - echo "You can manually place it in '$ddir' to avoid downloading." - exit 1 - fi - fi - - # Make sure this is the correct tarball. - if type sha512sum > /dev/null 2>/dev/null; then - checksum=$(sha512sum "$ucname" | awk '{print $1}') - if [ x$checksum = x$flockchecksum ]; then mv "$ucname" "$flocktarname" - else echo "ERROR: Non-matching checksum for '$flocktar'."; exit 1 - fi; - else mv "$ucname" "$flocktarname" - fi -fi - -# If the tarball is newer than the (possibly existing) program (the version -# has changed), then delete the program. -if [ -f .local/bin/flock ]; then - if [ $tardir/$flocktar -nt $ibidir/flock ]; then - rm $ibidir/flock - fi -fi - -# Build `flock' if necessary. -if ! [ -f $ibidir/flock ]; then - cd $tmpblddir - tar xf $tardir/$flocktar - cd flock-$flockversion - ./configure --prefix=$instdir - make - make install - cd $topdir - rm -rf $tmpblddir/flock-$flockversion - echo "Discoteq flock $flockversion" > $ibidir/flock -fi - - - - - -# Paths needed by the host compiler (only for `basic.mk') -# ------------------------------------------------------- -# -# At the end of the basic build, we need to build GCC. But GCC will build -# in multiple phases, making its own simple compiler in order to build -# itself completely. The intermediate/simple compiler doesn't recognize -# some system specific locations like `/usr/lib/ARCHITECTURE' that some -# operating systems use. We thus need to tell the intermediate compiler -# where its necessary libraries and headers are. -if [ x"$sys_library_path" != x ]; then - if [ x"$LIBRARY_PATH" = x ]; then - export LIBRARY_PATH="$sys_library_path" - else - export LIBRARY_PATH="$LIBRARY_PATH:$sys_library_path" - fi - if [ x"$CPATH" = x ]; then - export CPATH="$sys_cpath" - else - export CPATH="$CPATH:$sys_cpath" - fi -fi - - - - - -# Build basic software -# -------------------- -# -# When building these software we don't have our own un-packing software, -# Bash, Make, or AWK. In this step, we'll install such low-level basic -# tools, but we have to be very portable (and use minimal features in all). -echo; echo "Building necessary software (if necessary)..." -make -f reproduce/software/make/basic.mk \ - good_static_libc=$good_static_libc \ - rpath_command=$rpath_command \ - static_build=$static_build \ - numthreads=$numthreads \ - needs_ldl=$needs_ldl \ - on_mac_os=$on_mac_os \ - host_cc=$host_cc \ - -j$numthreads - - - - - -# All other software -# ------------------ -# -# We will be making all the dependencies before running the top-level -# Makefile. To make the job easier, we'll do it in a Makefile, not a -# script. Bash and Make were the tools we need to run Makefiles, so we had -# to build them in this script. But after this, we can rely on Makefiles. -if [ $jobs = 0 ]; then - numthreads=$($instdir/bin/nproc --all) -else - numthreads=$jobs -fi -.local/bin/env -i HOME=$bdir \ - .local/bin/make -f reproduce/software/make/high-level.mk \ - sys_library_path=$sys_library_path \ - rpath_command=$rpath_command \ - static_build=$static_build \ - numthreads=$numthreads \ - on_mac_os=$on_mac_os \ - sys_cpath=$sys_cpath \ - host_cc=$host_cc \ - -j$numthreads - - - - - -# Make sure TeX Live installed successfully -# ----------------------------------------- -# -# TeX Live is managed over the internet, so if there isn't any, or it -# suddenly gets cut, it can't be built. However, when TeX Live isn't -# installed, the project can do all its processing independent of it. It -# will just stop at the stage when all the processing is complete and it is -# only necessary to build the PDF. So we don't want to stop the project's -# configuration and building if its not present. -if [ -f $itidir/texlive-ready-tlmgr ]; then - texlive_result=$(cat $itidir/texlive-ready-tlmgr) -else - texlive_result="NOT!" -fi -if [ x"$texlive_result" = x"NOT!" ]; then - cat <<EOF - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!! Warning !!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -TeX Live couldn't be installed during the configuration (probably because -there were downloading problems). TeX Live is only necessary in making the -final PDF (which is only done after all the analysis has been complete). It -is not used at all during the analysis. - -Therefore, if you don't need the final PDF, and just want to do the -analysis, you can safely ignore this warning and continue. - -If you later have internet access and would like to add TeX live to your -project, please delete the respective files, then re-run configure as shown -below. Within configure, answer 'n' (for "no") when asked to re-write the -configuration files. - - rm .local/version-info/tex/texlive-ready-tlmgr - ./project configure - -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! - -EOF -fi - - - - - -# Citation of installed software -# -# After everything is installed, we'll put all the names and versions in a -# human-readable paragraph and also prepare the BibTeX citation for the -# software. -prepare_name_version () -{ - # First see if the (possible) `*' in the input arguments corresponds to - # anything. Note that some of the given directories may be empty (no - # software installed). - hasfiles=0 - for f in $@; do - if [ -f $f ]; then hasfiles=1; break; fi; - done - - # If there are any files, merge all the names in a paragraph. - if [ $hasfiles = 1 ]; then - - # Count how many names there are. This is necessary to identify the - # last element. - num=$(.local/bin/cat $@ \ - | .local/bin/sed '/^\s*$/d' \ - | .local/bin/wc -l) - - # Put them all in one paragraph. - .local/bin/cat $@ \ - | .local/bin/sort \ - | .local/bin/awk 'NF>0 { \ - c++; \ - if(c==1) \ - { \ - if('$num'==1) printf("%s", $0); \ - else printf("%s", $0); \ - } \ - else if(c=='$num') printf(" and %s\n", $0); \ - else printf(", %s", $0) \ - }' - fi -} - -# Report the different software in separate contexts (separating Python and -# TeX packages from the C/C++ programs and libraries). -proglibs=$(prepare_name_version $verdir/proglib/*) -pymodules=$(prepare_name_version $verdir/python/*) -texpkg=$(prepare_name_version $verdir/tex/texlive) - -# Write them as one paragraph for LaTeX. -pkgver=$mtexdir/dependencies.tex -.local/bin/echo "This research was done with the following free" > $pkgver -.local/bin/echo "software programs and libraries: $proglibs." >> $pkgver -if [ x"$pymodules" != x ]; then - .local/bin/echo "Within Python, the following modules" >> $pkgver - echo "were used: $pymodules." >> $pkgver -fi -.local/bin/echo "The \LaTeX{} source of the paper was compiled" >> $pkgver -.local/bin/echo "to make the PDF using the following packages:" >> $pkgver -.local/bin/echo "$texpkg. We are very grateful to all their" >> $pkgver -.local/bin/echo "creators for freely providing this necessary" >> $pkgver -.local/bin/echo "infrastructure. This research (and many " >> $pkgver -.local/bin/echo "others) would not be possible without them." >> $pkgver - -# Prepare the BibTeX entries for the used software (if there are any). -hasentry=0 -bibfiles="$ictdir/*" -for f in $bibfiles; do if [ -f $f ]; then hasentry=1; break; fi; done; - -# Make sure we start with an empty output file. -pkgbib=$mtexdir/dependencies-bib.tex -echo "" > $pkgbib - -# Fill it in with all the BibTeX entries in this directory. We'll just -# avoid writing any comments (usually copyright notices) and also put an -# empty line after each file's contents to make the output more readable. -if [ $hasentry = 1 ]; then - for f in $bibfiles; do - awk '!/^%/{print} END{print ""}' $f >> $pkgbib - done -fi - - - - - -# Clean the temporary build directory -# --------------------------------- -# -# By the time the script reaches here the temporary software build -# directory should be empty, so just delete it. Note `tmpblddir' may be a -# symbolic link to shared memory. So, to work in any scenario, first delete -# the contents of the directory (if it has any), then delete `tmpblddir'. -.local/bin/rm -rf $tmpblddir/* $tmpblddir - - - - - -# Register successful completion -# ------------------------------ -echo `.local/bin/date` > $finaltarget - - - - - - -# Final notice -# ------------ -# -# The configuration is now complete, we can inform the user on the next -# step(s) to take. -if [ x$reproducible_paper_group_name = x ]; then - buildcommand="./project make -j8" -else - buildcommand="./project make --group=$reproducible_paper_group_name -j8" -fi -cat <<EOF - ----------------- -The project and its environment are configured with no errors. - -Please run the following command to start. -(Replace '8' with the number of CPU threads on your system) - - $buildcommand - -To change the configuration later, please re-run './project configure', DO -NOT manually edit the relevant files. - -EOF diff --git a/reproduce/software/bash/git-post-checkout b/reproduce/software/bash/git-post-checkout deleted file mode 100755 index f6366dc..0000000 --- a/reproduce/software/bash/git-post-checkout +++ /dev/null @@ -1,66 +0,0 @@ -#!@BINDIR@/bash -# -# The example hook script to store the metadata information of version -# controlled files (with each commit) using the `metastore' program. -# -# Copyright (C) 2016 Przemyslaw Pawelczyk <przemoc@gmail.com> -# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org> -# -# This script is taken from the `examples/hooks/pre-commit' file of the -# `metastore' package (installed within the project, with an MIT license -# for copyright). We have just changed the name of the `MSFILE' and also -# set special characters for the installation location of meta-store so our -# own installation is found by Git. -# -# Permission is hereby granted, free of charge, to any person obtaining a -# copy of this software and associated documentation files (the -# "Software"), to deal in the Software without restriction, including -# without limitation the rights to use, copy, modify, merge, publish, -# distribute, sublicense, and/or sell copies of the Software, and to permit -# persons to whom the Software is furnished to do so, subject to the -# following conditions: -# -# The above copyright notice and this permission notice shall be included -# in all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN -# NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, -# DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR -# OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE -# USE OR OTHER DEALINGS IN THE SOFTWARE. - - -# File containig the metadata and metastore executable. -MSFILE=".file-metadata" -MSBIN=@BINDIR@/metastore - -# If metastore is not installed, then ignore this script (exit with a -# status of 0). -if [ ! -f $MSBIN ]; then exit 0; fi - -# Delete all temporary files -find @TOP_PROJECT_DIR@/ -name "*~" -type f -delete - -# Function to help in reporting a crash. -exit_on_fail() { - "$@" - if [ $? -ne 0 ]; then - echo "Failed to execute: $@" >&2 - exit 1 - fi -} - -# Check if the metadata file exists. -if [ ! -e "$MSFILE" ]; then - echo "\"$MSFILE\" missing" >&2 - exit 1 -fi - -# Run metastore. -exit_on_fail \ - $MSBIN -a -m -e -E -q -O @USER@ -G @GROUP@ -f "$MSFILE" - -# Return with a success code (0). -exit 0 diff --git a/reproduce/software/bash/git-pre-commit b/reproduce/software/bash/git-pre-commit deleted file mode 100755 index 9d550db..0000000 --- a/reproduce/software/bash/git-pre-commit +++ /dev/null @@ -1,83 +0,0 @@ -#!@BINDIR@/bash -# -# The example hook script to store the metadata information of version -# controlled files (with each commit) using the `metastore' program. -# -# Copyright (C) 2016 Przemyslaw Pawelczyk <przemoc@gmail.com> -# Copyright (C) 2018-2020 Mohammad Akhlaghi <mohammad@akhlaghi.org> -# -# WARNING: -# -# If the commit is aborted (e.g. by not entering any synopsis), -# then updated metastore file (.metadata by default) is not reverted, -# so its new version remains in the index. -# To undo any changes in metastore file written since HEAD commit, -# you may want to reset and checkout HEAD version of the file: -# -# git reset HEAD -- .metadata -# git checkout HEAD -- .metadata -# -# This script is taken from the `examples/hooks/pre-commit' file of the -# `metastore' package (installed within the project, with an MIT license -# for copyright). Here, the name of the `MSFILE' and also set special -# characters for the installation location of meta-store so our own -# installation is found by Git. -# -# Permission is hereby granted, free of charge, to any person obtaining a -# copy of this software and associated documentation files (the -# "Software"), to deal in the Software without restriction, including -# without limitation the rights to use, copy, modify, merge, publish, -# distribute, sublicense, and/or sell copies of the Software, and to permit -# persons to whom the Software is furnished to do so, subject to the -# following conditions: -# -# The above copyright notice and this permission notice shall be included -# in all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN -# NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, -# DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR -# OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE -# USE OR OTHER DEALINGS IN THE SOFTWARE. - -# File containig the metadata and metastore executable. -MSFILE=".file-metadata" -MSBIN=@BINDIR@/metastore - -# If metastore is not installed, then ignore this script (exit with a -# status of 0). -if [ ! -f $MSBIN ]; then exit 0; fi - -# Function to help in reporting a crash. -exit_on_fail() { - "$@" - if [ $? -ne 0 ]; then - echo "Failed to execute: $@" >&2 - exit 1 - fi -} - -# Run metastore. -exit_on_fail \ - $MSBIN -O @USER@ -G @GROUP@ -s -f "$MSFILE" - -# If it's first metastore commit, store again to include $MSFILE in $MSFILE. -if ! git-ls-tree --name-only HEAD 2>/dev/null | grep -Fqx "$MSFILE"; then - exit_on_fail \ - $MSBIN -O @USER@ -G @GROUP@ -s -f "$MSFILE" -fi - -# Check if the metadata file exists. -if [ ! -e "$MSFILE" ]; then - echo "\"$MSFILE\" missing" >&2 - exit 1 -fi - -# Add the metadata file to the Git repository. -exit_on_fail \ - git-add "$MSFILE" - -# Return with a success code (0). -exit 0 |