Reproducible source for Akhlaghi et al. (2021, arXiv:2006.03018) ---------------------------------------------------------------- Copyright (C) 2018-2021 Mohammad Akhlaghi \ See the end of the file for license conditions. This is the reproducible project source for the paper titled "**Towards Long-term and Archivable Reproducibility**", by Mohammad Akhlaghi, Raúl Infante-Sainz, Boudewijn F. Roukema, Mohammadreza Khellat, David Valls-Gabaud, Roberto Baena-Gallé, see [DOI:10.1109/MCSE.2021.3072860](https://doi.org/10.1109/MCSE.2021.3072860) [arXiv:2006.03018](https://arxiv.org/abs/2006.03018) or [zenodo.3872247](https://doi.org/10.5281/zenodo.3872247). To learn more about the purpose, principles and technicalities of this reproducible paper, please see `README-hacking.md`. In the "Quick start" section below we show a minimal set of commands to clone, and reproduce the full project using Git. In the next section the commands are explained more. The following section describes how to deal with a tarball of the project's source (not using Git). In the last section building the project within a Docker container is described. ### Quick start (using Git, with internet access) Run these commands to clone this project's history, enter it, configure it (let it build and install its own software) and "make it (let it do reproduce its analysis). If you already have the project on your system, you can ignore the first step (cloning). In the core Maneage branch, all operations will be done in the build-directory that you specify at configure time, no root permissions are required and no other part of your filesystem is affected. ```shell $ git clone http://git.maneage.org/paper-concept.git $ cd paper-concept $ ./project configure $ ./project make ``` ### Building the project This project was designed to have as few dependencies as possible without requiring root/administrator permissions. 1. Necessary dependencies: 1.1: Minimal software building tools like a C compiler and other very basic POSIX tools found on any Unix-like operating system (GNU/Linux, BSD, Mac OS, and others). All necessary dependencies will be built from source (for use only within this project) by the `./project configure` script (next step). Note that **Git is not mandatory**: if you don't have Git to run the first command above, go to the URL given in the command on your browser, and download the project's source (there is a button to download a compressed tarball of the project). You can also get project's source as a tarball from arXiv or Zenodo. 1.2: (OPTIONAL) Tarball of dependencies. If they are already present (in a directory given at configuration time), they will be used. Otherwise, a downloader (`wget` or `curl`) will be necessary to download any necessary tarball. The necessary tarballs are also collected in the archived project on Zenodo (link below). Just unpack that tarball, and when `./project configure` asks for the "software tarball directory", give the address of the unpacked directory: https://doi.org/10.5281/zenodo.3911395 2. Configure the environment (top-level directories in particular) and build all the necessary software for use in the next step. It is recommended to set directories outside the current directory. Please read the description of each necessary input clearly and set the best value. Note that the configure script also downloads, builds and locally installs (only for this project, no root privileges necessary) many programs (project dependencies). So it may take a while to complete. ```shell $ ./project configure ``` 3. Run the following command to reproduce all the analysis and build the final `paper.pdf` on `8` threads. If your CPU has a different number of threads, change the number (you can see the number of threads available to your operating system by running `./.local/bin/nproc`) ```shell $ ./project make -j8 ``` ### Building project tarball (without Git) If the paper is also published on arXiv, it is highly likely that the authors also uploaded/published the full project there along with the LaTeX sources. If you have downloaded (or plan to download) this source from arXiv, some minor extra steps are necessary as listed below. This is because this tarball is mainly tailored to automatic creation of the final PDF without actually using the './project' command! You can directly run 'latex' on this directory and the paper will be built with no analysis (all necessary built products are already included). #### Only building PDF using tarball (no analysis) 1. If you got the tarball from arXiv and the arXiv code for the paper is 1234.56789, then the downloaded source will be called `1234.56789` (no special identification suffix). However, it is actually a `.tar.gz` file. So take these steps to unpack it to see its contents. ```shell $ arxiv=1234.56789 $ mv $arxiv $arxiv.tar.gz $ mkdir $arxiv $ cd $arxiv $ tar xf ../$arxiv.tar.gz ``` 2. No matter how you got the tarball, if you just want to build the PDF paper from the tarball, simply run the command below. Note that this won't actually install any software or do any analysis, it will just use your host operating system to build the PDF and assumes you already have all the necessary LaTeX packages. ```shell $ make # Build PDF in tarball without doing analysis ``` 3. If you want to re-build the figures from scratch, you need to make the following corrections to the paper's main LaTeX source (`paper.tex`): uncomment (remove the starting `%`) of the line containing `\newcommand{\makepdf}{}`. See the comments above it for more information. #### Building full project from tarball (custom software and analysis) Since the tarball is mainly geared to only building only the final PDF, a few small tweaks are necessary to build the full project from scratch (download necessary software and data, build them and run the analysis and finally create the final paper). 1. If you got the tarball from arXiv, before following the standard procedure of projects described at the top of the file above (using the './project' script), its necessary to set its executable flag. arXiv removes the executable flag from the files (for its own security). ```shell $ chmod +x project ``` 2. Make the following change in two of the LaTeX files so LaTeX attempts to build the figures from scratch (to make the tarball, it was configured to avoid building the figures, just using the ones that came with the tarball). - `paper.tex`: uncomment (remove the starting `%`) of the line containing `\newcommand{\makepdf}{}`. See the comments above it for more information. - `tex/src/preamble-pgfplots.tex`: set the `tikzsetexternalprefix` variable value to `tikz/`, so it looks like this: `\tikzsetexternalprefix{tikz/}`. 3. Remove extra files. In order to make sure arXiv can build the paper (resolve conflicts due to different versions of LaTeX packages), it is sometimes necessary to copy raw LaTeX package files in the tarball uploaded to arXiv. Later, we will implement a feature to automatically delete these extra files, but for now, the project's top directory should only have the following contents (where `reproduce` and `tex` are directories). You can safely remove any other file/directory. ```shell $ ls COPYING paper.tex project README-hacking.md README.md reproduce tex ``` ### Building in Docker containers Docker containers are a common way to build projects in an independent filesystem, and an almost independent operating system. Containers thus allow using GNU/Linux operating systems within proprietary operating systems like macOS or Windows. But without the overhead and huge file size of virtual machines. Furthermore containers allow easy movement of built projects from one system to another without rebuilding. Just note that Docker images are large binary files (+1 Gigabytes) and may not be usable in the future (for example with new Docker versions not reading old images). Containers are thus good for temporary/testing phases of a project, but shouldn't be what you archive for the long term! Hence if you want to save and move your maneaged project within a Docker image, be sure to commit all your project's source files and push them to your external Git repository (you can do these within the Docker image as explained below). This way, you can always recreate the container with future technologies too. Generally, if you are developing within a container, its good practice to recreate it from scratch every once in a while, to make sure you haven't forgot to include parts of your work in your project's version-controlled source. In the sections below we also describe how you can use the container **only for the software environment** and keep your data and project source on your host. #### Dockerfile for a Maneaged project, and building a Docker image Below is a series of recommendations on the various components of a `Dockerfile` optimized to store the *built state of a maneaged project* as a Docker image. Each component is also accompanied with explanations. Simply copy the code blocks under each item into a plain-text file called `Dockerfile`, in the same order of the items. Don't forget to implement the suggested corrections (in particular step 4). **NOTE: Internet for TeXLive installation:** If you have the project software tarballs and input data (optional features described below) you can disable internet. In this situation, the configuration and analysis will be exactly reproduced, the final LaTeX macros will be created, and all results will be verified successfully. However, no final `paper.pdf` will be created to visualize/combine everything in one easy-to-read file. Until [task 15267](https://savannah.nongnu.org/task/?15267) is complete, we need internet to install TeXLive packages (using TeXLive's own package manager `tlmgr`) in the `./project configure` phase. This won't stop the configuration, and it will finish successfully (since all the analysis can still be reproduced). We are working on completing this task as soon as possible, but until then, if you want to disable internet *and* you want to build the final PDF, please disable internet after the configuration phase. Note that only the necessary TeXLive packages are installed (~350 MB), not the full TeXLive collection! 0. **Summary:** If you are already familiar with Docker, then the full Dockerfile to get the project environment setup is shown here (without any comments or explanations, because explanations are done in the next items). Note that the last two `COPY` lines (to copy the directory containing software tarballs used by the project and the possible input databases) are optional because they will be downloaded if not available. You can also avoid copying over all, and simply mount your host directories within the image, we have a separate section on doing this below ("Only software environment in the Docker image"). Once you build the Docker image, your project's environment is setup and you can go into it to run `./project make` manually. ```shell FROM debian:stable-slim RUN apt-get update && apt-get install -y gcc g++ wget RUN useradd -ms /bin/sh maneager USER maneager WORKDIR /home/maneager RUN mkdir build RUN mkdir software COPY --chown=maneager:maneager ./project-source /home/maneager/source COPY --chown=maneager:maneager ./software-dir /home/maneager/software COPY --chown=maneager:maneager ./data-dir /home/maneager/data RUN cd /home/maneager/source \ && ./project configure --build-dir=/home/maneager/build \ --software-dir=/home/maneager/software \ --input-dir=/home/maneager/data ``` 1. **Choose the base operating system:** The first step is to select the operating system that will be used in the docker image. Note that your choice of operating system also determines the commands of the next step to install core software. ```shell FROM debian:stable-slim ``` 2. **Maneage dependencies:** By default the "slim" versions of the operating systems don't contain a compiler (needed by Maneage to compile precise versions of all the tools). You thus need to use the selected operating system's package manager to import them (below is the command for Debian). Optionally, if you don't have the project's software tarballs, and want the project to download them automatically, you also need a downloader. ```shell # C and C++ compiler. RUN apt-get update && apt-get install -y gcc g++ # Uncomment this if you don't have 'software-XXXX.tar.gz' (below). #RUN apt-get install -y wget ``` 3. **Define a user:** Some core software packages will complain if you try to install them as the default (root) user. Generally, it is also good practice to avoid being the root user. After building the Docker image, you can always run it as root with this command: `docker run -u 0 -it XXXXXXX` (where `XXXXXXX` is the image identifier). Hence with the commands below we define a `maneager` user and activate it for the next steps. ```shell RUN useradd -ms /bin/sh maneager USER maneager WORKDIR /home/maneager ``` 4. **Copy project files into the container:** these commands make the assumptions listed below. IMPORTANT: you can also avoid copying over all, and simply mount your host directories within the image, we have a separate section on doing this below ("Only software environment in the Docker image"). * The project's source is in the `maneaged/` sub-directory and this directory is in the same directory as the `Dockerfile`. The source can either be from cloned from Git (highly recommended!) or from a tarball. Both are described above (note that arXiv's tarball needs to be corrected as mentioned above). * (OPTIONAL) By default the project's necessary software source tarballs will be downloaded when necessary during the `./project configure` phase. But if you already have the sources, its better to use them and not waste network traffic (and resulting carbon footprint!). Maneaged projects usually come with a `software-XXXX.tar.gz` file that is published on Zenodo (link above). If you have this file, put it in the same directory as your `Dockerfile` and include the relevant lines below. * (OPTIONAL) The project's input data. The `INPUT-FILES` depends on the project, please look into the project's `reproduce/analysis/config/INPUTS.conf` for the URLs and the file names of input data. Similar to the software source files mentioned above, if you don't have them, the project will attempt to download its necessary data automatically in the `./project make` phase. ```shell # Make the project's build directory and copy the project source RUN mkdir build COPY --chown=maneager:maneager ./maneaged /home/maneager/source # Optional (for software) COPY --chown=maneager:maneager ./software-XXXX.tar.gz /home/maneager/ RUN tar xf software-XXXX.tar.gz && mv software-XXXX software && rm software-XXXX.tar.gz # Optional (for data) RUN mkdir data COPY --chown=maneager:maneager ./INPUT-FILES /home/maneager/data ``` 5. **Configure the project:** With this line, the Docker image will configure the project (build all its necessary software). This will usually take about an hour on an 8-core system. You can also optionally avoid putting this step (and the next) in the `Dockerfile` and simply execute them in the Docker image in interactive mode (as explained in the sub-section below, in this case don't forget to preserve the build container after you are done). ```shell # Configure project (build full software environment). RUN cd /home/maneager/source \ && ./project configure --build-dir=/home/maneager/build \ --software-dir=/home/maneager/software \ --input-dir=/home/maneager/data ``` 6. **Project's analysis:** With this line, the Docker image will do the project's analysis and produce the final `paper.pdf`. The time it takes for this step to finish, and the storage/memory requirements highly depend on the particular project. ```shell # Run the project's analysis RUN cd /home/maneager/source && ./project make ``` 7. **Build the Docker image:** The `Dockerfile` is now ready! In the terminal, go to its directory and run the command below to build the Docker image. We recommend to keep the `Dockerfile` in **an empty directory** and run it from inside that directory too. This is because Docker considers that directories contents to be part of the environment. Finally, just set a `NAME` for your project and note that Docker only runs as root. ```shell sudo su docker build -t NAME ./ ``` #### Interactive tests on built container If you later want to start a container with the built image and enter it in interactive mode (for example for temporary tests), please run the following command. Just replace `NAME` with the same name you specified when building the project. You can always exit the container with the `exit` command (note that all your changes will be discarded once you exit, see below if you want to preserve your changes after you exit). ```shell docker run -it NAME ``` #### Running your own project's shell for same analysis environment The default operating system only has minimal features: not having many of the tools you are accustomed to in your daily command-line operations. But your maneaged project has a very complete (for the project!) environment which is fully built and ready to use interactively with the commands below. For example the project also builds Git within itself, as well as many other high-level tools that are used in your project and aren't present in the container's operating system. ```shell # Once you are in the docker container cd source ./project shell ``` #### Preserving the state of a built container All interactive changes in a container will be deleted as soon as you exit it. THIS IS A VERY GOOD FEATURE IN GENERAL! If you want to make persistent changes, you should do it in the project's plain-text source and commit them into your project's online Git repository. As described in the Docker introduction above, we strongly recommend to **not rely on a built container for archival purposes**. But for temporary tests it is sometimes good to preserve the state of an interactive container. To do this, you need to `commit` the container (and thus save it as a Docker "image"). To do this, while the container is still running, open another terminal and run these commands: ```shell # These two commands should be done in another terminal docker container list # Get 'XXXXXXX' of your desired container from the first column above. # Give the new image a name by replacing 'NEW-IMAGE-NAME'. docker commit XXXXXXX NEW-IMAGE-NAME ``` #### Copying files from the Docker image to host operating system The Docker environment's file system is completely indepenent of your host operating system. One easy way to copy files to and from an open container is to use the `docker cp` command (very similar to the shell's `cp` command). ```shell docker cp CONTAINER:/file/path/within/container /host/path/target ``` #### Only software environment in the Docker image You can set the docker image to only contain the software environment and keep the project source and built analysis files (data and PDF) on your host operating system. This enables you to keep the size of the Docker image to a minimum (only containing the built software environment) to easily move it from one computer to another. Below we'll summarize the steps. 1. Get your user ID with this command: `id -u`. 2. Put the following lines into a `Dockerfile` of an otherwise empty directory. Just replacing `UID` with your user ID (found in the step above). This will build the basic directory structure. for the next steps. ```shell FROM debian:stable-slim RUN apt-get update && apt-get install -y gcc g++ wget RUN useradd -ms /bin/sh --uid UID maneager USER maneager WORKDIR /home/maneager RUN mkdir build ``` 3. Create an image based on the `Dockerfile` above. Just replace `PROJECT` with your desired name. ```shell docker build -t PROJECT ./ ``` 4. Run the command below to create a container based on the image and mount the desired directories on your host into the special directories of your container. Just don't forget to replace `PROJECT` and set the `/PATH`s to the respective paths in your host operating system. ```shell docker run -v /PATH/TO/PROJECT/SOURCE:/home/maneager/source \ -v /PATH/TO/PROJECT/ANALYSIS/OUTPUTS:/home/maneager/build/analysis \ -v /PATH/TO/SOFTWARE/SOURCE/CODE/DIR:/home/maneager/software \ -v /PATH/TO/RAW/INPUT/DATA:/home/maneager/data \ -it PROJECT ``` 5. After running the command above, you are within the container. Go into the project source directory and run these commands to build the software environment. ```shell cd /home/maneager/source ./project configure --build-dir=/home/maneager/build \ --software-dir=/home/maneager/software \ --input-dir=/home/maneager/data ``` 6. After the configuration finishes successfully, it will say so and ask you to run `./project make`. But don't do that yet. Keep this Docker container open and don't exit the container or terminal. Open a new terminal, and follow the steps described in the sub-section above to preserve the built container as a Docker image. Let's assume you call it `PROJECT-ENV`. After the new image is made, you should be able to see the new image in the list of images with this command (in the same terminal that you created the image): ```shell docker image list # In the other terminal. ``` 7. Now you can run `./project make` in the initial container. You will see that all the built products (temporary or final datasets or PDFs), will be written in the `/PATH/TO/PROJECT/ANALYSIS/OUTPUTS` directory of your host. You can even change the source of your project on your host operating system an re-run Make to see the effect on the outputs and add/commit the changes to your Git history within your host. You can also exit the container any time. You can later load the `PROJECT-ENV` environment image into a new container with the same `docker run -v ...` command above, just use `PROJECT-ENV` instead of `PROJECT`. 8. In case you want to store the image as a single file as backup or to move to another computer, you can run the commands below. They will produce a single `project-env.tar.gz` file. ```shell docker save -o project-env.tar PROJECT-ENV gzip --best project-env.tar ``` 9. To load the tarball above into a clean docker environment (either on the same system or in another system), and create a new container from the image like above (the `docker run -v ...` command). Just don't forget that if your `/PATH/TO/PROJECT/ANALYSIS/OUTPUTS` directory is empty on the new/clean system, you should first run `./project configure -e` in the docker image so it builds the core file structure there. Don't worry, it won't build any software and should finish in a second or two. Afterwards, you can safely run `./project make`. ```shell docker load --input project-env.tar.gz ``` #### Deleting all Docker images After doing your tests/work, you may no longer need the multi-gigabyte files images, so its best to just delete them. To do this, just run the two commands below to first stop all running containers and then to delete all the images: ```shell docker ps -a -q | xargs docker rm docker images -a -q | xargs docker rmi -f ``` ### Copyright information This file and `.file-metadata` (a binary file, used by Metastore to store file dates when doing Git checkouts) are part of the reproducible project mentioned above and share the same copyright notice (at the start of this file) and license notice (below). This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This project is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this project. If not, see .