aboutsummaryrefslogtreecommitdiff
path: root/tex/src/references.tex
AgeCommit message (Collapse)AuthorLines
2020-05-01Added interesting references by DavidMohammad Akhlaghi-0/+28
David suggested some interesting references in particular about the problems with Juypyter notebooks that are now added to the long version of the paper. We'll later decide if/how they can be used.
2020-04-18Two papers cited, for research software and data management plansMohammad Akhlaghi-0/+13
These are important aspects that are highly relevant to Maneage: its philosophy (the former) and usability (the latter). To add them, I tried to summarize some other parts of the paper.
2020-04-14Further text shrink, added Competing interest and Author contributionsMohammad Akhlaghi-0/+14
To make the text easier to read and further comply with the author guideline, the text was shrank a little more and the two final sections were also added on "Competing interest" and "Author contributions". I also found the CODATA logo on Wikipedia in SVG format (vector graphics), so I replaced the previous pixelated PNG format with the PDF (converted from SVG).
2020-03-30Section on starting new projects, and publishing project addedMohammad Akhlaghi-0/+20
With the main structure of Maneage explained, I have started to explain how a new project is created, along with a schematic diagram that shows two scenarios of how Git can help with project management.
2020-03-28Cleaned up the introduction, definitions for provenance and lineageMohammad Akhlaghi-1/+35
Until now, the introduction had repeated several things and also had a relatively long list of things to add in its end. Also, it was highly focused to scientific papers. With this commit, I effectively re-wrote it, with the starting paragraphs becoming more industry-friendly, while also focusing on the scientific cases. Many of the repetative parts were removed and the listed items in the end were put into the text in a much better context. Also, now that the name of the system involves "lineage" (and a lot of focus is put on it in the start) the terms data provenance and lineage were defined in the definition section. Some other intersting points that I encountered during the research on definitions were added to the discussion and final lists, and the DOI of one reference paper was corrected.
2020-03-02Described the first analysis phase with a demo subMakefileMohammad Akhlaghi-0/+59
Until now, there was no explanation on an actual analysis phase, therefore with this commit an example scenario with a readable Makefile is included. The Data lineage graph was also simplified to both be more readable, and also to correspond to this new explanation and subMakefile. Some random edits/typos were also corrected and some references added for discussion.
2020-02-16Menke+2020 data is now imported and ready for later steps in plain textMohammad Akhlaghi-1/+1
The main problems with this dataset was the names of the journals (which sometimes have single quotes or apostrophes in them that is really annoying for SED)! But ultimately, for the simple study we want to do here, the journal names are irrelevant, so in the end I just ignored the names. Later we can set an identifier for the journals if necessary. But now we have the basic information in a way that is usable in a plot to show in this paper.
2020-02-15Edits in text, added Menke+2020 as a referenceMohammad Akhlaghi-0/+14
The text was slightly improved/edited and I also recently came up to the Menke et al. 2020 (DOI:10.1101/2020.01.15.908111) which also has some good datasets we can use as a demonstration here.
2020-02-07Edited parts of the textMohammad Akhlaghi-4/+4
While reading over the already written parts (and hopefully complete the paper), they were edited/corrected to be more clear.
2020-02-06Minor edits to various partsMohammad Akhlaghi-0/+28
Some edits were made after rereading of some parts.
2020-01-26General project structure and configuration describedMohammad Akhlaghi-22/+67
In the last few days I have been writing these two sections in the middle of other work. But I am making this commit because it has already become a lot! I am now going onto the description of `./project make'.
2020-01-20Added figure showing project's file structureMohammad Akhlaghi-3/+17
It was a little hard to describe the file structure so instead of using a standard listing as most papers do, I thought of showing the file and directory structure as boxes within each other (modeled on the Gnome disk-utility). Some other polishing was done throughout the paper also.
2020-01-18Raw draft (until now as a separate repository) importedMohammad Akhlaghi-30/+1500
Until now, I was writing the paper without the template. But we will soon be adding a tutorial to the template, and I thought it will be good to have an example demonstration here too. So I just brought the hole project into the template structure, allowing us to add the template analysis later when its ready, and also allowing us to easily reproduce this paper ofcourse (without having to worry about the host's TeXLive installation.
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-1/+1
Now that its 2020, its necessary to include this year in the copyright statements.
2019-04-13Corrected copyright notices and info about adding copyright infoMohammad Akhlaghi-2/+2
Until now, the files where the people were meant to change didn't have a proper copyright notice (for example `Copyright (C) YOUR NAME.'). This was wrong because the license does not convey copyright ownership. So the name of the file's original author must always be included and when people modify it (and add their own copyright-able modifications). With this commit, the file's original author (and email) are added to the copyright notice and when more than one person modified a file, both names have their individual copyright notice. Based on this, the description for adding a copyright notice in `README-hacking.md' has also been modified.
2019-04-12Dependency BibTeX entries included only when necessaryMohammad Akhlaghi-249/+7
Until now, there was a single `tex/src/references.tex' file that housed the BibTex entries for everything (software and non-software). Since we have started to include the BibTeX entry for more software, it will be hard to manage the large (sometime unused) BibTeX entries of the software in the middle of the non-software related citations in the text of the paper. Therefore, with this commit, a `tex/dependencies' directory has been made which has a separate BibTeX entry file for each software that needs one. After the software is built, this file is copied to the new `.local/version-info/cite' directory. At the end, the configure script will concatenate all the files in this directory into one file which will later be used with `tex/src/references.tex' by BibLaTeX. This greatly simplifies managing of citations. Allowing us to focus on the software-building and paper-writing citations separately/cleanly (and thus be more efficient in both).
2019-04-12Imported recent corrections, no conflictsMohammad Akhlaghi-0/+115
Some recent corrections that were done by Raul are now merged into the pipeline. There weren't any conflicts.
2019-04-12Fixed some Scipy-related packages citationsRaul Infante-Sainz-12/+42
Until now, the Scipy citation was only one paper and not the correct one (it was the online manual). With this commit, Scipy is properly cited using the two papers. Also some modifications in the `tex/src/references.tex' have been done (remove last page number).
2019-04-12Acknowledged Scipy-related packages: Cython, Matplotlib, Numpy and ScipyRaul Infante-Sainz-0/+85
Until now, name and version of all Python packages were indicated in the final paper, but not the main paper of them (if it exists). With this commit, some Python packages (Cython, Matplotlib, Numpy and Scipy) are now properly acknoledged by citating the source paper. `mpi4py' is also cited although this package is not yet included into the pipeline.
2019-04-12Gnuastro's citation included in its build targetMohammad Akhlaghi-1/+1
With this commit, we are applying the new style of citing software within the build rule of Gnuastro.
2019-04-02Copyright notice added to remaining filesMohammad Akhlaghi-0/+21
After doing a systematic search for files without a copyright notice, a few more were found that didn't have a notice. So a notice was added for them. I used this Bash command to find the files: for f in $(find ./ -type f); do \ if [[ $f != *.git* ]]; then \ n=$(grep -i copyright $f | wc -l); \ echo "$n $f"; \ fi; \ done | awk '$1==0'
2019-02-13Imported recent work on building Python within the pipelineMohammad Akhlaghi-0/+94
Raul Infante-Sainz added the building of Python (along with the Numpy and Astropy packages) into the pipeline. That work is now being merged into the main pipeline branch. There was only this small problem that needed to be fixed: the Python tarball's name after unpacking is actually `Python-X.X.X' (with a captial P), not `python-X.X.X'. This has been corrected with this merge.
2019-02-13Astropy installed in the pipelineRaul Infante-Sainz-0/+94
Astropy was added and one very important thing is that we have to use the pypi tarball (https://pypi.org/) (which is bootstrapped) and not the github tarball.
2019-02-06Better management for .tex directories to build from tarballMohammad Akhlaghi-0/+45
In order to collaborate effectively in the project, even project members that don't necessarily want (or have the capacity) to do the whole analysis must be able to contribute to the project. Until now, the users of the distributed tarball could only modify the text and not the figures (built with PGFPlots) of the paper. With this commit, the management of TeX source files in the pipeline was slightly modified to allow this as cleanly as I could think of now! In short, the hand-written TeX files are now kept in `tex/src' and for the pipeline's generated TeX files (in particular the old `tex/pipeline.tex'), we now have a `tex/pipeline' symbolic-link/directory that points to the `tex' directory under the build directory. When packaging the project, `tex/pipeline' will be a full directory with a copy of all the necessary files. Therefore as far as LaTeX is concerned, having a build-directory is no longer relevant. Many other small changes were made to do this job cleanly which will just make this commit message too long! Also, the old `tarball' and `zip' targets are now `dist' and `dist-zip' (as in the standard GNU Build system).