aboutsummaryrefslogtreecommitdiff
path: root/reproduce
AgeCommit message (Collapse)AuthorLines
2020-05-29TeX installation crash because of different tarball versions fixedRaul Infante-Sainz-2/+58
Until this commit, when the user have previous TeX tarball already present, the project crashed when trying to re-configure, if there was a newer version of TeX. This is because TeX are updated yearly. With this commit, this bug has been fixed. Now, during the installation of TeX, it checks if this problem happens. If this is the case, then it moves the old tarball, download the new one and install it. If not, it will just install the already present tarball or crash because of any other reason. This probem was recurrent, and each time TeX was updated, the previous tarball had to be removed manually. But now, with this commit, it is done automatically. The detection and fix of this bug has been possible with the help of Mohammad Akhlaghi, thanks!
2020-05-29Reproducible research based on open-access papersBoud Roukema-0/+17
Publishing a paper on reproducible research without making it easy for readers to read the references would defeat the point. Of course we have to make some compromises with some journals' reluctance to shift towards the free world, but to satisfy scientific ethics, we should at least provide clickable URLs to the references, preferably to the ArXiv version if available [1], and also to the DOI, again, preferably to an open-access version of the URL if available. I was not able to fully get this done in the .bst file, so there's an sed/tr hack done to the .bbl file in `reproduce/analysis/make/paper.mk` to tidy up commas and spaces. This commit also reverts some of the hacks in the Akhlaghi IAU Symposium `tex/src/references.tex` entry, to match the improved .bst file, `tex/src/IEEEtran_openaccess.bst`, provided here with a different name to the original, in order to satisfy the LaTeX licence. [1] https://cosmo.torun.pl/blog/arXiv_refs
2020-05-23Added TeXLive's ulem package to also be builtMohammad Akhlaghi-1/+1
David reported this problem, it happened right after importing IEEEtran, but for some reason, it didn't happen for me.
2020-05-23Corrected name of listings package when installing it with texliveMohammad Akhlaghi-1/+1
When entering the name of the "listings" package, I had forgot to add the final 's', so it wasn't being installed on a clean system! I didn't have a problem until now, because it remained from previous builds.
2020-05-22Re-write of the paper to fit in ~6000 words and IEEE formatMohammad Akhlaghi-7/+14
Following the fact that the DSJ editor decided that this paper doesn't fit into their scope, we decided to submit it to IEEE's Computing in Science and Engineering (CiSE). So with this commit the text was re-written to fit into their style and word-count limitations.
2020-05-02First implementation of style in IEEEtran styleMohammad Akhlaghi-18/+20
The paper is no longer using LuaLaTeX, but raw LaTeX (that saves a DVI), it is so much faster! Initially I had used LuaLaTeX to use special fonts to resemble the CODATA Data Science Journal, but all that overhead is no longer necessary. Therefore I also removed the MANY extra LaTeX packages we were importing. The paper builds and is able to construct one of its images (the git-branching figure) with only 7 packages beyond the minimal TeX/LaTeX installation. Also in terms of processing it is so much faster. The text is just temporary now, and mainly just a place holder. With the next commit, I'll fill it with proper text.
2020-05-01Imported recent changes in Maneage, minor conflicts fixedMohammad Akhlaghi-248/+359
A few small conflicts showed up here and there. They are fixed with this merge.
2020-05-01Fixed OpenSSL deprecation bug on some OSs, causing problems in libgit2Boud Roukema-1/+16
Until this commit, the configure step would fail with an error when compiling libgit2 on a test system. The origin of this bug, on the OS that was tested, appears to be that in OpenSSL Version 1.1.1a, openssl/ec.h fails to include openssl/openconf.h. The bug is described in more detail at https://savannah.nongnu.org/bugs/index.php?58263 With this commit, this is fixed by manually inserting a necessary components. In particular, `sed` is used to insert a preprocessor instruction into `openssl/openconf.h`, defining `DEPRECATED_1_2_0(f)`, for an arbitrary section of code `f`, to include that code rather than exclude it or warn about it. This commit is valid provided that openssl remains at a version earlier than 1.2.0. Starting at version 1.2.0, deprecation warnings should be run normally. We have thus moved the version of OpenSSL in `versions.conf' to the section for programs that need to be manually checked for version updates with a note to remind the user when reaching that version. Other packages that use OpenSSL may benefit from this commit, not just libgit2.
2020-04-29Reactivated --host-cc config option to use host C compilerMohammad Akhlaghi-5/+23
Until now, if GCC couldn't be built for any reason, Maneage would crash and the user had no way forward. Since GCC is complicated, it may happen and is frustrating to wait until the bug is fixed. Also, while debugging Maneage, when we know GCC has no problem, because it takes so long, it discourages testing. With this commit, we have re-activated the `--host-cc' option. It was already defined in the options of `./project', but its affect was nullified by hard-coding it to zero in the configure script on GNU/Linux systems. So with this commit that has been removed and the user can use their own C compiler on a GNU/Linux operating system also. Furthermore, to inform the user about this option and its usefulness, when GCC fails to build, a clear warning message is printed, instructing the user to post the problem as a bug and telling them how to continue building the project with the `--host-cc' option.
2020-04-28Better explanation at the end of the configurationMohammad Akhlaghi-4/+8
Until now, at the end of the configuration step, we would tell the user this: "To change the configuration later, please re-run './project configure', DO NOT manually edit the relevant files". However, as Boud suggested in Bug #58243, this is against our principle to encourage users to modify Maneage. With this commit, that explanation has been expanded by a few sentences to tell the users what to change and warn them in case they decide to change the build-directory.
2020-04-28Astropy will no longer be installed by defaultMohammad Akhlaghi-1/+1
Until now Gnuastro and Astropy where installed by default in any clean build of Maneage. Gnuastro is used to do the demonstration analysis that is reported in the paper and Astropy was just there to help in testing the building of the MANY tools it depends on! It (and its dependencies) also had several papers that helped show software citation. However, as Boud suggested in task #15619, the burden of installing them for a new user may be too much and any future changes will cause merge conflicts. It may also give the impression that Maneage is only/mainly written for astronomers. So with this commit, I am removing Astropy as a default target. But we can only remove Gnuastro after we include an alternative analysis in the demonstration `delete-me' files. Following Boud's suggestion in that task, `TARGETS.conf' was also added to the files to be ignored in any future merge (in the checklist of `README-hacking.mk'). The solution was already described there, but mainly focused on the deleted `delete-me' files. So with this commit, I brought out this item as a more prominent item in the list. Maybe we can later add the analysis done in the Maneage paper (not yet published). In terms of testing the software builds, we already have task #15272 (Single target to build all high-level software, for testing) that aims to have a single configure option to install ALL high-level software and we can ask people to try if they like and report errors.
2020-04-28Configration bug fixed: other problematic software names from tarballBoud Roukema-5/+4
Similar to the previous commit (e43e3291483699), following a change made yesterday in the identification of software names from their tarballs, a few other problematic names are corrected with this commit: `apr-util', HDF5, TeX Live's installation tarball and `rpcsvc-proto'. Even though we have visually checked the list of software, other unidentified similar cases may remain and will be fixed when found in practice.
2020-04-28Configration bug fixed: identify pkg-config from its tarball nameBoud Roukema-1/+1
Until Commit 3409a54 (from yesterday), pkg-config was found correctly in `reproduce/software/make/basic.mk` by searching for `pkg`. However, commit a21ea20 made an improvement in the regular expression for relating package names and download filenames, and the string `pkg-config` with the new regex no longer simplifies to `pkg`. The result of this was that the basic.mk could not find `pkg-config` in the list of packages, since it was still listed as `pkg`. This blocked downloading for a system without pkg-config preloaded. With this commit (of just a few bytes), the bug is fixed.
2020-04-27Aborting with informative error when GNU gettext not foundMohammad Akhlaghi-1/+39
Until now, we wouldn't explicity check for GNU gettext. If it was present on the system, we would just add a link to it in Maneage's installation directory. However, in bug #58248, Boud noticed that Git (a basic software) actually needs it to complete its installation. Unfortunately we haven't had the tiem to include a build of Gettext in Maneage. Because it is mostly available on many systems, it hasn't been reported too commonly, it also has many dependencies which make it a little time consuming to install. So with this commit, we actually check for GNU gettext right after checking the compiler and if its not available an informative error message is written to inform the user of the problem, along with suggestions on fixing it (how to install GNU gettext from their package manager).
2020-04-27Configuration: improved version separation from tarball nameBoud Roukema-27/+36
Until now, the sed script for determining URL download rules in the three software building Makefiles (`basic.mk', `high-level.mk' and `python.mk') considered package names such as `fftw-3...` and `fftw2-2.1...` to be identical. As the example above shows, this would make it hard to include some software that may hav conflicting non-number names. With this commit, the SED script that is used to separate the version from the tarball name only matches numbers that are after a dash (`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but `fftw-3-...` and `fftw2-2.1...` to be different. As a result of this change, the `elif' check for some of the other programs like `m4', or `help2man' was also corrected in all three Makefiles. While doing this check on all the software, we noticed that `zlib-version' is being repeated two times in `version.conf' so it was removed. It caused no complications, because both were the same number, but could lead to bugs later.
2020-04-26Corrected Gnuastro configuration directory in initialize.mkZahra Sharbaf-1/+1
Recently (in Commit 8eb0892e) the Gnuastro configuration files moved under "reproduce/analysis/config/gnuastro" directory (before that they were in `reproduce/software/config/gnuastro)'. But this hadn't been reflected in it the variable that defines this directory in `initialize.mk'. With this commit, the address of the Gnuastro configuration files directory is corrected, allowing Gnuastro programs to operate properly when it is used.
2020-04-26verify-outputs.conf: typo correction in comment to avoid confusionBoud Roukema-1/+1
Until now, the comment in the file said that setting the `verify-outputs` variable to `yes` disables the verification. Looking at `reproduce/analysis/make/verify.mk` shows that the opposite is true. With this commit, the word `disable` is replaced with `enable` so that the user is not confused by the conflict between the source code in the other file and this comment.
2020-04-26Configure.sh: build directory checked for ability to modify permissionsPedram Ashofteh Ardakani-11/+81
Until now we only checked for the existance and write-ability of the build directory. But we recently discovered that if the specified build-directory is in a non-POSIX compatible partition (for example NTFS), permissions can't be modified and this can cause crashs in some programs (in particular, while building Perl, see [1]). The thing that makes this problem hard to identify is that on such partitions, `chmod' will still return 0 (so it was hard to find). With this commit, a check has been added after the user specifies the build-directory. If the proposed build directory is not able to handle permissions as expected, the configure script will not continue and will let the user know and will ask them for another directory. Also, the two printed characters at the start of error messages were changed to `**' (instead of `--'). When everything is good, we'll use `--' to tell the user that their given directory will be used as the build directory. And since there are multiple checks now, the final message to specify a new build directory is now moved to the end and not repeated in every check. [1] https://savannah.nongnu.org/support/?110220
2020-04-24TypoBoud Roukema-1/+1
2020-04-23Further edits to summarize the parts corrected by BoudMohammad Akhlaghi-1/+4
[Compared to first submission to DSJ last week with 11436 words in raw PDF, we have decreased the paper by ~1000 words to 10493 :-)] As with the previous commits, the moment Boud changed the structure of sentences, I was able to find the redundancies and remove them! This is a fascinating feature of collaboration I had never felt before: it is so hard to find redundancies in my own raw text, but even a minor correction by someone else suddeny breaks my mental memories/barrier on the sentence, allowing me to be more critical to it! Anyway, besides such corrections, I fixed a few other things: 1) In the DSJ's recently published papers, ther is no `~' between "Figure" and its number. 2) I noticed that in `tex/src/figure-src-inputconf.tex' I was actually using manually input strings for the filename, checksum and size! This was contrary to the whole philosophy of Maneage(!), I must have rushed and forgot! So LaTeX variables are now defined and used.
2020-04-20Configuration: current directory printed properly in stdoutMohammad Akhlaghi-9/+9
Until now, the message that we printed just before starting to build software didn't actually print the current directory, but only `pwd'. With this commit, this is fixed (it uses the `currentdir' variable that is already found before).
2020-04-20Configuration: current directory printed properly in stdoutMohammad Akhlaghi-9/+9
Until now, the message that we printed just before starting to build software didn't actually print the current directory, but only `pwd'. With this commit, this is fixed (it uses the `currentdir' variable that is already found before).
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-202/+157
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-04-18Imported recent updates in Maneage, no conflictsMohammad Akhlaghi-41/+25
There weren't any conflicts in this merge.
2020-04-18Properly adding libiconv to the libraries that libstdc++ links withMohammad Akhlaghi-1/+4
Of the GCC dynamically linked libraries we need to manually add RPATH to all and for `libstdc++' we also need to tell it to link with `libiconv'. Until now, the conditional to check for libstdc++ was not working and thus libiconv wasn't been added to it. With this commit the conditional has been corrected and is now working. Also, to help in reading the logs, an echo statement was added after every call to PatchELF.
2020-04-17Replaced name of directory under akhlaghi.org as backup serverMohammad Akhlaghi-17/+17
Until now, when a the raw tarball of some software wasn't usable, I would put it under my own webpage, or `akhlaghi.org/reproduce-software'. That same address was also used as a backup server. However, now the project has a proper name: Maneage. So I changed the directory on my own server to `akhlaghi.org/maneage-software'. With this commit, this new address has replaced the old one. But to avoid crashes in projects that haven't yet merged with the main Maneage branch, the old `reproduce-software' still works (its actually a symbolic link to the new directory now).
2020-04-17Removed confusing comment in configure.sh, and extra variableMohammad Akhlaghi-12/+2
In the previous commit, we remove the `-static' flag from building PatchELF because it wasn't necessary any more. Howver, the comment for the check still included it and could be confusing. This is corrected with this commit. Also, we don't need the `good_static_libc' variable (that was only defined to pass onto PatchELF). This has also been corrected.
2020-04-17Patchelf is now built dynamicallyMohammad Akhlaghi-11/+2
Until a few commits ago, PatchELF was built statically because it was used to patch `libstdc++' at the end of the GCC building phase, but PatchELF also depends on `libstdc++', so it would crash. However, recently when patching the GCC libraries, we don't directly apply Patchelf to the library, first we copy it to a temporary place, do the patching, then put it in its proper place. So the problem above won't happen any more. With this commit, I am thus removing the static flag from patchelf and letting it built dynamically all the time. The main problem was that some systems don't have a static C++ library, so PatchELF couldn't be built statically. Instead of adding more checks, we just fixed the core foundation of the problem.
2020-04-17Imported recent work in Maneage, minor conflicts fixedMohammad Akhlaghi-37/+37
A few minor conflicts came up that were easily fixed.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-31/+31
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-04-14Added note with link to paper's distribution tarballMohammad Akhlaghi-0/+1
Since the journal doesn't accept supplementary files during initial submission, I have put this link on the PDF for the referee and editors to access if they want. Also the `tex/img' file was added to the distribution tarball.
2020-04-14Corrected package distribution step and not including BibLaTeX packagesMohammad Akhlaghi-3/+6
I was using some special Bash feature before to ignore the distribution directory itself when copying the files, but that had some problems, so I just used a simple for loop over a `find' command to ignore it. Also, for now, we don't need BibLaTeX sources in the project (that is primarily for arXiv), so to help the referee see a more cleaner contents of this supplement file.
2020-04-13Installation year removed from TeXLive installationMohammad Akhlaghi-14/+12
TeXLive recently transitioned from its 2019 version to its 2020 version thanks to Elham Saremi's trial of the this project. The fact that traditionally Maneage installs all TeXLive packages in a per-year directory is very annoying and required an update in the core Maneage system every year. So I suddently recognized that we can fix this by setting a different name for the directory holding the release year. This has been implemented with this commit. I have also done this change in the main Maneage branch for other projects to also benefit from this correction.
2020-04-13Configure (TeXLive): year correction also in high-level packagesMohammad Akhlaghi-1/+1
In the previous commit, I removed the year from the basic installation of TeXLive packages, but I forgot to correct this in the high-level TeXLive packages! This is corrected with this commit.
2020-04-13Configure (TeXLive): Year of distribution no longer in directoryMohammad Akhlaghi-13/+11
It is this time of year again: TeXLive has transitioned to its 2020 release and the year is imprinted into the installation directory of TeXLive. Until now, we have had to manually change this year and it caused complications and was very annoying. With this commit, the explicit year has been removed from TeXLive's installation and we now simply put a `maneage' instead of the year. I tried this on another system and it worked nicely. Until the time that we can fully install LaTeX packages from source tarballs, this is the best thing we could do for now.
2020-04-13Full existing contents summaried, only discussion to goMohammad Akhlaghi-0/+8
The contents until two commits ago when I started to summarize the paper are now in a new and shorter format: previously the discussion started on page 25, but now it starts on page 17. It is still a little longer than 8000 words, but not as significantly as before. I will add the discussion and also try to summarize it futher before submission.
2020-04-12Configure (numpy): added --std=c99 to CFLAGS to fix errorMohammad Akhlaghi-0/+1
Elham Saremi recently reported the following errors when building Numpy in numpy/core/src/npysort/radixsort.c.src: "error: 'for' loop initial declarations are only allowed in C99 or C11 mode". After some searching, I found Issue 14147[1] on Numpy's main repository about the same problem. As described there, apparently Numpy needs C99 compiler, but doesn't check for it or set it manually (for some strange reason, leaving it to the packagers to check if they want!!!). Any way, after a check with Elham, we were able to fix it by adding the `--std=c99' to CFLAGS of Numpy's build and with this commit, it is now being implemented in the core Maneage to not cause a problem in any other project. [1] https://github.com/numpy/numpy/issues/14147
2020-04-06Astropy now depending on the Expat library to fix internal conflictRaul Infante-Sainz-10/+26
Until now, Astropy was instructed to build its own internal copy of the Expat library. However, with the recent commits before, Maneage now includes an installation of Expat and Astropy can't keep the two (its internal version and the project's version) separate, so they conflict and don't let Astropy get built. With this commit, the problem is fixed by setting the Expat library as an explicit dependency of Astropy and asking Astropy to ignore its internal copy. While doing this, I recognized that it is much easier and elegant to add steps in various stages of the `pybuild' function through hooks instead of variables. So the fifth argument of the `pybuild' function was removed and now it actually checks if hooks are defined as functions and if so, they will be called. The `pyhook_after' function was also implemented in the installation of `pybind11' (which needed it, given that the 5th argument of `pybuild' was removed) and after doing a test-build, I noticed that two lines were not ending with a `\' in `boost' (a dependency of `pybind11'). Commit written originally by Mohammad Akghlaghi
2020-04-06Corrected typo in the definition of pybuildMohammad Akhlaghi-1/+1
Raul noticed this during the build: I had mistakenly put an extra `&&' at the start of the line where the line before ended with a `;'.
2020-04-05Astropy now depending on the Expat library to fix internal conflictMohammad Akhlaghi-9/+25
Until now, Astropy was instructed to build its own internal copy of the Expat library. However, with the recent commits before, Maneage now includes an installation of Expat and Astropy can't keep the two (its internal version and the project's version) separate, so they conflict and don't let Astropy get built. When trying to build Manage (the actual project, not this paper) after applying the commits before there, Raul discovered this problem. With this commit, the problem is fixed by setting the Expat library as an explicit dependency of Astropy and asking Astropy to ignore its internal copy. While doing this, I recognized that it is much easier and elegant to add steps in various stages of the `pybuild' function through hooks instead of variables. So the fifth argument of the `pybuild' function was removed and now it actually checks if hooks are defined as functions and if so, they will be called. The `pyhook_after' function was also implemented in the installation of `pybind11' (which needed it, given that the 5th argument of `pybuild' was removed) and after doing a test-build, I noticed that two lines were not ending with a `\' in `boost' (a dependency of `pybind11').
2020-04-05Commenting version numbers with an underscore for LaTeXRaul Infante-Sainz-1/+3
Until now we would simply return the version numbers as they were written into the separate files and situations can happen where the version numbers contain an underscore (`_'). However, this character is a methematical character in LaTeX, causing LaTeX to complain and abort. With this commit, a step has been added at the end of the configure script to convert any possible `_' to `\_'. Once it is commented (a backslash is put behind it), the underscore will be printed as it is in the final PDF. This commit was originally written by Mohammad Akhlaghi
2020-04-05The build of M4 and XLSX I/O on macOS has been fixedRaul Infante-Sainz-6/+37
Until now, the M4 that was built on macOS had internal problems (as discussed in #1): it would simply print `Abort trap: 6' in the output and abort. After looking at the build of Homebrew, I noticed that they apply a patch (correct one line) to fix this problem. To be able to apply that patch on macOS systems, I had fully open up the build recipe of M4 and atleast on the testing system, it was built successfully. Also, after successfully building M4, and thus Autoconf and thus Minizip, we were able to build XLSX I/O on a macOS and found out that the internal library's full address wasn't being put in the libraries and executables. With this commit, we now use macOS's `install_name_tool' to correct the positions of the two `libxlsxio_*' libraries in all its executables. This commit was originally written by Mohammad Akhlaghi
2020-04-05Including version number of Minizip in its installation targetRaul Infante-Sainz-1/+1
Until this commit, only the word `Minizip' was written into the Minizip installation target (without the version number of Minizip). With this commit, this minor bug has been fixed by using the appropiate Make variable: `$(minizip-version)'.
2020-04-05Building Minizip 1.x instead of Minizip 2.xRaul Infante-Sainz-17/+67
Minizip is a dependency of XLSX I/O and until now, I was just using the most recent version I found (2.9.2), but XLSX I/O is written for the Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my computer!!! I think XLSX I/O's CMake is instructed to look into system directories by default when it doesn't find the directories in the given places. And because I had installed Minizip on my operating system, it did't complain. Upon trying the build on their systems, Yahya, Raul and Zahra reported a failure in the build of XLSX I/O which was due the to the problem above (we were installing the wrong version of Minizip!). With this commit, this has been fixed by installing the 1.x series of Minizip (whish is actually installed within zlib!). This commit was original done by Mohammad Akhlaghi.
2020-04-04Commenting version numbers with an underscore for LaTeXMohammad Akhlaghi-1/+3
Until now we would simply return the version numbers as they were written into the separate files and situations can happen where the version numbers contain an underscore (`_'). However, this character is a methematical character in LaTeX, causing LaTeX to complain and abort. With this commit, a step has been added at the end of the configure script to convert any possible `_' to `\_'. Once it is commented (a backslash is put behind it), the underscore will be printed as it is in the final PDF.
2020-04-04The build of M4 and XLSX I/O on macOS has been fixedMohammad Akhlaghi-5/+36
Until now, the M4 that was built on macOS had internal problems (as discussed in #1): it would simply print `Abort trap: 6' in the output and abort. After looking at the build of Homebrew, I noticed that they apply a patch (correct one line) to fix this problem. To be able to apply that patch on macOS systems, I had fully open up the build recipe of M4 and atleast on the testing system, it was built successfully. Also, after successfully building M4, and thus Autoconf and thus Minizip, we were able to build XLSX I/O on a macOS and found out that the internal library's full address wasn't being put in the libraries and executables. With this commit, we now use macOS's `install_name_tool' to correct the positions of the two `libxlsxio_*' libraries in all its executables.
2020-04-04Building Minizip 1.x instead of Minizip 2.xMohammad Akhlaghi-17/+68
Minizip is a dependency of XLSX I/O and until now, I was just using the most recent version I found (2.9.2), but XLSX I/O is written for the Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my computer!!! I think XLSX I/O's CMake is instructed to look into system directories by default when it doesn't find the directories in the given places. And because I had installed Minizip on my operating system, it did't complain. Upon trying the build on their systems, Yahya, Raul and Zahra reported a failure in the build of XLSX I/O which was due the to the problem above (we were installing the wrong version of Minizip!). With this commit, this has been fixed by installing the 1.x series of Minizip (whish is actually installed within zlib!).
2020-04-03CMake updated to version 3.17.0Raul Infante-Sainz-2/+2
With this commit, CMake has been updated to its most recent version. This upgrade has been done because in the installation of XLSX I/O on macOS laptop, it crashes complaining about C compiler "not able to compile a simple test program". After a fast search, I found it could be possible to just use the most recent version of CMake to solve the problem. But it didn't work. In any case, it is good to have the most recent version of CMake included.
2020-04-02Imported recent work on Maneage, minor conflicts fixedMohammad Akhlaghi-607/+752
A few minor conflicts occurred and were fixed.
2020-04-01Removed multiple tabs in MissFITS tarball definitionRaul Infante-Sainz-1/+1
With this commit, multiples tabs in the definition of MissFITS tarball have been removed. Now they are white spaces.