| Age | Commit message (Collapse) | Author | Lines |
|---|
|
David made suggested some minor edits that are now implemented (most
importantly that he would not like to be associated with an ORCID ID).
I also "saved" a new Zenodo DOI for the final submission of this paper to
Zenodo, but "after" obtaining the page number information and other minor
things.
|
|
Some minor conflicts (all expected from the commit messages in the Maneage
branch) occurred but were easily fixed.
|
|
Summary:
- Use the new name of this variable in your Makefiles.
- In 'metadata.conf', remove fixed URL prefixes for DOIs
('https://doi.org/') or arXiv ('https://arxiv.org/abs').
Until now, the Make variable that would print the general metadata (of
whole project) into each to-be-published dataset was called
'print-copyright'! But it now does much more than simply printing the
copyright, it will also print a lot of metadata like arXiv ID, Zenodo DOI
and etc into plain-text outputs. The out-dated name could thus be
misleading and cause confusions.
With this commit, the variable is therefore called
'print-general-metadata'. After merging your project with the Maneage
branch, please replace any usage of 'print-copyright' to
'print-general-metadata'.
Also with this commit, 'README-hacking.md' mentions 'metadata.conf' and
'print-general-metadata' in the "Publication checklist" section and reminds
you to keep the first up to date, and use the second in your
to-be-published datasets.
|
|
In the project's 'metadata.conf', we also have an option to store the
journal DOI of the project (that will later be printed in the output file
products). So now that the paper's DOI has been set by the journal, it was
time to add it in the project too.
While looking at the usage of the metadata, I noticed that the "Publication
checklist" of 'README-hacking.md' didn't talk about it. In fact, the part
about putting metadata went into a lot of detail without even mentioning
the generic 'print-general-metadata' variable (previously called
'print-copyright') that is created in 'initialize.mk'. So I removed those
extra points and just recommended using this variable for plain-text files
and putting similar info in other formats.
Some other minor changes were made:
- The metadata now doesn't need the fixed 'https://doi.org/' prefix (to
make it consistent with the arXiv identifier). Inside 'initialize.mk',
there are now two variables called 'doi-prefix-url' and
'arxiv-prefix-url' that contain the fixed prefix.
- The 'print-copyright' name was clearly outdated for all the extra
metadata that this variable created (including the copyright). So its
name was changed to 'print-general-metadata'.
The generic Maneage changes will be taken into Maneage after this (they
were tested here).
|
|
Until now, we were primarily linking people to the Gitlab fork of this
paper. However, since this paper is part of Maneage, its main repository is
on Maneage's own server at http://git.maneage.org/paper-concept.git
With this commit therefore, all the gitlab.com URLs have been corrected to
owr own Git server.
While looking into Git-related points, I also noticed that in the demo code
listing showing how to clone Maneage and start a new project, we were using
Git's old/depreciated 'master' name. Git (and almost all common
repositories) now use 'main' as the default branch name, so this has also
been corrected here.
|
|
When built in 'group' mode, the write permissions of all created files will
be activated for a certain group of users in the host operating system. The
user specifies the name of the group with the '--group' option at configure
time. At the very start, the './project' script checks to see if the given
group name actually exists or not (to avoid hard-to-debug errors popping up
later).
Until now, the checking 'sg' command (that was used to build the project
with group-writable permissions) would always fail due to the excessive
number of redirections. Therefore, it would always print the error message
and abort.
With this commit, the output of 'sg' is no longer re-directed (which also
helps users in debuggin). If the group does actually exist, it will just
print a small statement saying so, and if it fails, the error message is
printed. This fixed the problem, allowing maneage to be built in
group-mode.
I also noticed that the variable name keeping the group name
('reproducible_paper_group_name') used the old name for the project (which
was "Reproducible paper template"! So it has been changed/corrected to
'maneage_group_name'.
|
|
In the previous commit, some Gnuastro-specific initializations were
removed but a few more cases remained that are removed with this
commit.
|
|
Until now the SWIG software would use the host operating system's packages
to find the TCL configuraiton (which we don't install yet in Maneage). In
particular, you can see the error during its configuration here:
....
checking for pkg-config... pkg-config
checking for Tcl configuration... found /usr/lib/tclConfig.sh
/usr/lib/tclConfig.sh: line 2: dpkg-architecture: command not found
/usr/lib//tcl8.6/tclConfig.sh: line 2: dpkg-architecture: com. not found
With this commit, TCL has been disabled when building SWIG with the
'--without-tcl' option. Later, when we add TCL in Maneage, we can remove
this option.
|
|
With a recent update of macOS systems (macOS Big Sur 11.2.3 and Xcode
12.4), there are many warnings when building C programs (for example the
simple program we compile to check the compiler, or some of the software
like `gzip'). It prints hundreds of warning lines for every source file
that are irrelevant for our builds, but really clutters the output.
With this commit, these warnings are disabled by adding
`-Wno-nullability-completeness' to the 'CPPFLAGS' environment
variable. This has also been added to the very first check of the C
compiler in the configure step.
|
|
Until now, each time there was a problem in the configuration of Maneage'd
projects and debugging was necessary, we had to take the following changes:
- Run the configuration on a single thread ('-j1') to see the building of
only the problematic software.
- Disable the Zenodo check manually by commenting those parts of
'reproduce/software/shell/configure.sh'. Because the internet connection
wastes a few seconds and is thus very annoying during repeated runs!
- Manually remove the '-k' option that was passed to Make (when building
the software). With the '-k', Make keeps going with the execution of
other targets if something crashes and this usually causes confusions
during the debugging.
Doing the manual changes within the code was both very annoying and prone
to errors (forgetting to correct it!).
With this commit, the existing '--debug' option has been generalized to the
software configuration phase of Maneage also. Until now, it was only
available in the analysis phase (and would directly be passed to the 'make'
command that would run the analysis). When this option is used, and the
project is in the software configuration phase, the Zenodo check won't be
done, it will use one single thread ('-j1'), and it will stop the execution
as soon as an error occurs (Make is not run with '-k').
|
|
Until now when making a link to the system's 'dl' and 'pthread' libraries
we were simply linking the installed location on the system (in
'/usr/lib'). However, in some systems, these may themselves be links to
other locations and this could cause linking problems.
With this commit, we now use 'realpath' to extract the absolute address of
the final file that the libraries may link to, and directly link to them.
A minor cosmetic correction was also made in the build rule for CFITSIO:
the long line was broken into two!
|
|
Until now, important LaTeX packages like 'caption' (for managing figure
captions), 'hyperref' (for managing links) and 'xcolor' (for managing
colors) were being loaded inside the optional
'tex/src/preamble-maneagge-defualt-style.tex' file. We recommend to remove
this file from loading when you use custom journal sytels. However, these
packages will often be necessary after loading special journal styles also.
With this commit, these packages are now loaded into LaTeX as part of the
'tex/src/preamble-project.tex' file. This file is in charge of LaTeX
settings that are custom to the project and independent of its style.
Several other small corrections are made with this commit:
- I noticed that './project make texclean' crashes if no PDF exists in the
working directory! So a '-f' was added to the 'rm' command of the
'texclean' rule.
- As part of the LaTeX Hyperref, we can set general metadata or properties
for the PDF (that aren't written into the printable PDF, but into the
file metadata). They can be viewed in many PDF viewers as PDF
properties. Until now, we were only using the '\projecttitle' macro here
to write the paper's title. However, thanks to the recently added
'reproduce/analysis/config/metadata.conf', we now have a lot of useful
information that can also go here. So the 'metadata-copyright-owner' is
now used to define the PDF author, and the project's
'metadata-git-repository' and commit hash are written into the PDF
subject. But to import these, it was necessary to define them as LaTeX
macros, hence the addition of these macros in 'initialize.mk'.
- Some extra packages that aren't necessary to build the default PDF were
removed in 'preamble-project.tex'.
|
|
Until now, when you ran './project make dist', first it would delete the
temporary files (like files ending in '~' or '.swp' created by some
editors), then it had a place to add project-specific operations for the
distribution.
However, in the process of cleaning the temporary files, it would 'cd' into
the directory that would later be packaged. So project-specific operations
would first have to 'cd' back into the top source directory. This was prone
to hard-to-find bugs.
With this commit, to avoid the problem the project-specific operations are
now placed before the cleaning phase. This is also technically good because
in the project-specific operations there may also be temporary files that
shouldn't go into the distribution tarball.
|
|
There was a single conflict in the comments of one part of 'configure.sh'
that has been fixed.
There was also a single place that needed to convert 'BDIR' to 'badir' in
this project (so after the merge, it also built easily).
|
|
Until now, the build directory contained a 'software/' directory (that
hosted all the built software), a 'tex/' subdirectory for the final
building of the paper, and many other directories containing
intermediate/final data of the specific project. But this mixing of built
software and data is against our modularity and minimal complexity
principles: built software and built data are separate things and keeping
them separate will enable many optimizations.
With this commit, the build directory of the core Maneage branch will only
contain two sub-directories: 'software/' and 'analysis/'. The 'software/'
directory has the same contents as before and is not touched in this
commit. However, the 'analysis/' directory is new and everything created in
the './project make' phase of the project will be created inside of this
directory.
To facilitate easy access to these top-level built directories, two new
variables are defined at the top of 'initialize.mk': 'badir', which is
short for "built-analysis directory" and 'bsdir', which is short for
"built-software directory".
HOW TO IMPLEMENT THIS CHANGE IN YOUR PROJECT. It is easy: simply replace
all occurances of '$(BDIR)' in your project's subMakefiles (except the ones
below) to '$(badir)'. To confirm if everything is fine before building your
project from scratch after merging, you can run the following command to
see where 'BDIR' is used and confirm the only remaning cases.
$ grep -r BDIR reproduce/analysis/*
--> make/verify.mk: innobdir=$$(echo $$infile | sed -e's|$(BDIR)/||g'); \
--> make/initialize.mk:badir=$(BDIR)/analysis
--> make/initialize.mk:bsdir=$(BDIR)/software
--> make/initialize.mk: $$sys_rm -rf $(BDIR)
--> make/top-prepare.mk:all: $(BDIR)/software/preparation-done.mk
'BDIR' should only be present in lines of the files above. If you see
'$(BDIR)' used anywhere else, simply change it to '$(badir)'. Ofcourse, if
your project assumes BDIR in other contexts, feel free to keep it, it will
not conflict. If anything un-expected happens, please post a comment on the
link below (you need to be registered on Savannah to post a comment):
https://savannah.nongnu.org/task/?15855
One consequence of this change is that the 'analysis/' subdirectory can be
optionally mounted on a separate partition. The need for this actually came
up for some new users of Maneage in a Docker image. Docker can fix
portability problems on systems that we haven't yet supported (even
Windows!), or had a chance to fix low-level issues on. However, Docker
doesn't have a GUI interface. So to see the built PDF or intermediate data,
it was necessary to copy the built data to the host system after every
change, which is annoying during working on a project. It would also need
two copies of the source: one in the host, one in the container. All these
frustrations can be fixed with this new feature.
To describe this scenario, README.md now has a new section titled "Only
software environment in the Docker image". It explains step-by-step how you
can make a Docker image to only host the built software environment. While
your project's source, software tarballs and 'BDIR/analysis' directories
are on your host operating system. It has been tested before this commit
and works very nicely.
|
|
Until now, when building GNU Binutils on GNU Linux operating systems, we
would simply put a link to the host's core C library components (the
'*crt*' files). However, the symbolic link wasn't "forced"! So if it
already existed in the build directory, it would crash.
With this commit a '-f' option has been added to the 'ln' command and this
fixed the problem.
This bug was reported by Zahra Sharbaf.
|
|
Since the addition of the appendix bibliography we hadn't checked the 'make
dist' command, as a result the PDF couldn't be built. With this commit, in
the 'dist' rule, we are now also copying 'appendix.bbl' and the created
tarball could build the PDF properly. Also the 'peer-review' directory is
now also included in the tarball created by './project make dist'.
I also found a small typo in the description of Occam (an 'a' was missing)
and fixed it.
|
|
There weren't any conflicts in this merge; either technical conflicts that
can be found by Git, or logical conflicts (that will cause a crash in the
project).
|
|
After correctly setting Less to depend on 'ncurses', I noticed its still
not linking to Maneage's 'ncurses', but pointing to my host system's
'ncurses' (that happens to have the same version! So it would crash on a
system with a different version). This shows that like some other software,
we need to manually correct the RPATH inside Less.
With this command, the necessary call to 'patchelf' has been added and with
it, the installed 'less' command properly linked to Maneage's internal
build of 'ncurses'.
|
|
Until now, the 'less' software package (used to view large files easily on
the command-line and used by Git for things like 'git diff' or 'git log')
only depended on 'patchelf' (which is a very low-level software).
However, as Boud reported in bug #59811 [1], building less would crash with
an error saying "Cannot find terminal libraries" in some systems (including
the proposed Docker image of 'README.md' which I confirmed
afterwards). Looking into the 'configure' script of 'less', I noticed that
'less' is actually just checking for some functions provided by the ncurses
library!
With this commit, 'less' depends on 'ncurses'. I was able to confirm that
with this change, 'less' successfully builds within the Docker image.
[1] https://savannah.nongnu.org/bugs/?59811
|
|
Having entered 2021, it was necessary to update the years of all the
copyright statements.
|
|
There were only three very small conflicts that have been fixed.
|
|
Until now, the build strategy of the paper was to have a single output PDF
that either contains (1) the full paper with appendices in the same paper
(2) only the main body of the paper with no appencies.
But the editor in chief of CiSE recently recommended publishing the
appendices as supplements that is a separate PDF (on its webpage). So with
this commit, the project can make either (1) a single PDF (containing both
the main body and the appendices) that will be published on arXiv and will
be the default output (this is the same as before). (2) two PDFs: one that
is only the main body of the paper and another that is only the appendices.
Since the appendices will be printed as a PDF in any case now, the old
'--no-appendix' option has been replaced by '--supplement'. Also, the
internal shell/TeX variable 'noappendix' has been renamed to
'separatesupplement'.
|
|
Until now there was only a 'clean' (to delete all files created during the
'make' phase) and the 'distclean' (to delete all files during configuration
and make). But sometimes we don't want to delete all the files created
during the full 'make' phase, we only want to delete the files that were
created by LaTeX for building the paper.
Witht this commit, a new target has been added for this job. You can now
run the following command for this job:
./project make texclean
Only the files in '$(BDIR)/tex/build' will be deleted (and the 'tikz'
directory under that location is recreated, ready for a future build).
|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
Until now, there was no warning when the 'maneage' branch didn't exist in
the Git history. This can happen when you forget to push the 'maneage'
branch to a remote for your project, and you later clone your project from
that remote (for example on another computer). We use the 'maneage' branch
to report the latest commit hash and date in the final paper (which can
greatly help future readers). Since we check the 'maneage' branch on every
run of './project make' (in 'initialize.mk') this would result in a printed
statement like this:
fatal: Not a valid object name maneage
Also until now, the description of what to do when TeXLive wasn't installed
properly wasn't complete: it didn't mention that it is necessary to delete
the TeXLive target files. This could confuse users (they would re-run
'./project configure -e', but with no effect).
With this commit, for the 'maneage' branch issue a complete warning will be
printed. Telling the user what to do to get the 'maneage' branch (and thus
fix this warning). Also, the LaTeX macros that go in the paper are now red
when the 'maneage' branch doesn't exist, telling the user to see the
printed warning (thus encouraging the user to get the branch). For the
TeXLive issue, the necessary commands to run are now also printed in the
warning.
|
|
Until now, when building the high-level (optional) software, we would give
both 'CPPFLAGS' and 'C_INCLUDE_PATH' the same value/directory in
'high-level.mk'. But we recently found that on macOS's C compiler
('clang'), if a directory is included in both 'CPPFLAGS' and
'C_INCLUDE_PATH', then that directory is ignored in 'CPPFLAGS' (which has
higher priority). This caused linking problems when the version of a
software on the host was different from the Maneage version.
With this commit, 'C_INCLUDE_PATH' is not set on macOS any more and this
fixed the problem on the reported systems.
This bug was fixed with the help of Mohammad Akhlaghi and Mahdieh Navabi.
|
|
Less is rarely used in non-interactive mode and is primarily intended for
interactively viewing large files. So its need within Maneage (for batch
processing) wasn't often felt until now. However, when running './project
shell' (which completely closes-off the outside environment), or building a
Maneage'd project within a minimal container that doesn't have less, it
becomes hard to use Git (and in particular its 'diff' output which depends
on 'less').
With this commit, Less has been added as a dependency of Git in
'basic.mk'. In total its built product is roughly 800KB and builds within a
second or two. So it isn't a burden on any project. But it can be very
useful when the projects are being developed within the Maneage environment
itself.
|
|
In a recent build on a macOS, we recognized that Texinfo needs the
'libintl.h' headers of Gettext. However, Gettext depends on M4, and until
now we had set M4 to depend on Texinfo. Therefore adding Gettext as a
dependency of Texinfo would cause a circular dependency.
On the macOS, we temporarily disabled M4's Texinfo dependency, and the
build went through. I also checked on my GNU/Linux system: temporarily
renamed all Texinfo built files from my system and done a clean build of M4
and it succeeded. To be further safe, I built Maneage from this commit
(where M4 doesn't depend on Texinfo) in a Docker container, and it went
through with no problems. So the current M4 version indeed doesn't need
Texinfo. I think adding Texinfo as a dependency of M4 was a historic issue
from the early days.
In the process, I also cleaned 'basic.mk' a little:
- A "# Level N" comment was added on top of each group of software that
can be built in parallel (generally).
- GNU Nano was moved to the end of the file (to be "Level 6").
- Some comments were edited in some places.
|
|
Some minor conflicts that came up during the merge were fixed.
|
|
Until now, Maneage only provided the commit hashes (of the project and
Maneage) as LaTeX macros to use in your paper. However, they are too
cryptic and not really human friendly (unless you have access to the Git
history on a computer).
With this commit, to make things easier for the readers, the date of both
commits are also available as LaTeX macros for use in the paper. The date
of the Maneage commit is also included in the acknowledgements.
Also, the paragraph above the acknowledgements has been updated with better
explanation on why adding this acknowledgement in the science papers is
good/necessary.
|
|
This only concerns the TeX sources in the default branch. In case you don't
use them, there should only be a clean conflict in 'paper.tex' (that is
obvious and easy to fix). Conflicts may only happen in some of the
'tex/src/preamble-*.tex' files if you have actually changed them for your
project. But generally any conflict that does arise by this commit with
your project branch should be very clear and easy to fix and test.
In short, from now on things will even be easier: any LaTeX configuration
that you want to do for your project can be done in
'tex/src/preamble-project.tex', so you don't have to worry about any other
LaTeX preamble file. They are either templates (like the ones for PGFPlots
and BibLaTeX) or low-level things directly related to Maneage. Until now,
this distinction wasn't too clear.
Here is a summary of the improvements:
- Two new options to './project make': with '--highlight-new' and
'--highlight-notes' it is now possible to activate highlighting on the
command-line. Until now, there was a LaTeX macro for this at the start
of 'paper.tex' (\highlightchanges). But changing that line would change
the Git commit hash, making it hard for the readers to trust that this
is the same PDF. With these two new run-time options, the printed commit
hash will not changed.
- paper.tex: the sentences are formatted as one sentence per line (and one
line per sentence). This helps in version controlling narrative and
following the changes per sentence. A description of this format (and
its advantages) is also included in the default text.
- The internal Maneage preambles have been modified:
- 'tex/src/preamble-header.tex' and 'tex/src/preamble-style.tex' have
been merged into one preamble file called
'tex/src/preamble-maneage-default-style.tex'. This helps a lot in
simply removing it when you use a journal style file for example.
- Things like the options to highlight parts of the text are now put in
a special 'tex/src/preamble-maneage.tex'. This helps highlight that
these are Maneage-specific features that are independent of the style
used in the paper.
- There is a new 'tex/src/preamble-project.tex' that is the place you
can add your project-specific customizations.
|
|
This commit fixes the error of trying to run bibtex on
appendix.tex when the --no-appendix option is selected.
A hardwired hack, appropriate only for this specific paper,
replaces the more-than-three-author parts of two long author
lists by "et al." To test this without having to redownload
the menke file, first do
"rm -fv .build/tex/build/*.aux .build/tex/build/*.bbl"
and then "./project make --no-appendix" a few times.
This commit should reduce the word length by about 70 words.
|
|
There is an answer for all the referee points now. I also did some minor
edits in the paper. But we are still over the limit by around 250 words.
The only remaining point that is not yet addressed (and has '####' around
it) is the discussion on parallelization and its effect on reproducibility.
|
|
This commit updates "paper.tex" and "peer-review/1-answer.txt"
for the first 15 (out of 59!) reviewer points, excluding
points 2 (not yet done) and 9 (README-hacking.md needs
tidying).
A fix to "reproduce/analysis/make/paper.mk" for the
links in the appendices is also done in this commit (the same
algorithm as for paper.tex is added). The links in the appendices
are not (yet) clickable.
|
|
Raul's added point on the answer to the referee was very good, so I edited
it a little to be more clear (and removed his name).
Also, after looking in a few parts of the text, I fixed a few typos.
|
|
A new directory has been added at the top of the project's source called
'peer-review'. The raw reviews of the paper by the editors and referees has
been added there as '1-review.txt'. All the main points raised by the
referees have been listed in a numbered list and addressed (mostly) in
'1-answers.txt'. The text of the paper now also includes all the
implemented answers to the various points.
|
|
Until now, the core Maneage 'paper.tex' had a '\highlightchanges' macro
that defines two LaTeX macros: '\new' and '\tonote'.
When '\highlightchanges' was defined, anything that was written within
'\new' became dark green (highlighting new things that have been
added). Also, anything that was written in '\tonote' was put within a '[]'
and became dark red (to show that there is a note here that should be
addressed later).
When '\highlightchanges' wasn't defined, anything within the '\new' element
would be black (like the rest of the text), and the things in '\tonote'
would not be shown at all.
Commenting the '\newcommand{\highlightchanges}{}' line within 'paper.tex'
(to toggle the modes above) would create a different Git hash and has to be
committed.
But this different commit hash could create a false sense in the reader
that other things have also been changed and the only way they could
confirm was to actually go and look into the project history (which they
will not usually have time to do, and thus won't be able to trust the two
modes of the text).
Also, the added highlights and the note highlights were bundeled together
into one macro, so you couldn't only have one of them.
With this commit, the choice of highlighting either one of the two is now
done as two new run-time options to the './project' script (which are
passed to the Makefiles, and written into the 'project.tex' file which is
loaded into 'paper.tex'). In this way, we can generate two PDFs with the
same Git commit (project's state): one with the selected highlights and
another one without it.
This issue actually came up for me while implementing the changes here: we
need to submit one PDF to the journal/referees with highlights on the added
features. But we also need to submit another PDF to arXiv and Zenodo
without any highlights. If the PDFs have different commit hashes, the
referees may associate it with other changes in any part of the work. For
example https://oadoi.org/10.22541/au.159724632.29528907 that mentions
"Another version of the manuscript was published on arXiv: 2006.03018",
while the only difference was a few words in the abstract after the journal
complained on the abstract word-count of our first submission (where the
commit hashes matched with arXiv/Zenodo).
|
|
With the optional appendices added recently to the paper, it was important
to go through them and make them more fitting into the paper.
|
|
Until now, when the 'pdf-build-final' configuration variable (defined in
'reproduce/analysis/config/pdf-build.conf') was given any string a PDF
would be built. This was very confusing, because people could put a 'no'
and the PDF would still be built!
With this commit, only when this variable has a value of 'yes' will the PDF
be built. If given any other string (or no string at all), it will not
produce a PDF.
This issue was reported by Zahra Sharbaf.
|
|
Given the referee reports, after discussing with the editors of CiSE, we
decided that it is important to include the complete appendix we had before
that included a thorough review of existing tools and methods. However, the
appendix will not be published in the paper (due to the strict word-count
limit). It will only be used in the arXiv/Zenodo versions of the paper.
This actually created a technical problem: we want the commit hash of the
project source to remain the same when the paper is built with an appendix
or without it.
To fix this problem the choice of including an appendix has gone into the
'project' script as a run-time option called '--no-appendix'. So by default
(when someone just runs './project make'), the PDF will have an appendix,
but when we want to submit to the journal, or when the appendix isn't
needed for a certain reason, we can use this new option. The appendix also
has its own separate bibliography.
Some other corrections made in this commit:
1. Some new references were added that had an '_' in their source, they
were corrected in 'references.tex'.
2. I noticed that 'preamble-style.tex' is not actually used in this paper,
so it has been deleted.
|
|
The LaTeX macro files for these two subMakefiles are created on every run
of './project make'. So their commands are also printed every time and
hardly ever will a normal user want to modify or change these.
So to avoid populating the standard output of a Maneaged project with all
these extra lines every time (possibly getting mixed with the important
analysis or LaTeX outputs), an '@' has been placed at the start of the
recipes. With an '@' at the start of the recipe, Make is instructed to not
print the commands it wants to run in the standard output.
|
|
After a fresh build of Maneage with a newly downloaded TeXLive, I noticed
that it is complaining about not finding 'xstring.sty', apparently some
package that depeneded on it is no longer including it itself!
It is thus now added to the packages that are built by Maneage's TeXLive.
|
|
Until now, the core Maneage branch included some configuration files for
Gnuastro's programs. This was actually a remnant of the distant past when
Maneage didn't actually build its own software and we had to rely on the
host's software versions. This file contained the configuration files
specific to Gnuastro for this project and also had a feature to avoid
checking the host's own configuration files.
However, we now build all our software ourselves with fixed configuration
files (for the version that is being installed and its version is
stored). So those extra configuration files were just extra and caused
confusion and problems in some scenarios. With this commit, those extra
files are now removed.
Also, two small issues are also addressed in parallel with this commit:
- When running './project make clean', the 'hardware-parameters.tex' macro
file (which is created by './project configure' is not deleted.
- The project title is now written into the default output's PDF's
properties (through 'hypersetup' in 'tex/src/preamble-header.tex')
through the LaTeX macro.
All these issues were found and fixed with the help of Samane Raji.
|
|
Until now, during the configure step it was checked if the host Operative
System were GNU/Linux, and if not, we assumed it is macOS. However, it can
be any other different OS! With this commit, now we explicity check if the
system is GNU/Linux or Darwin (macOS). If it is not any of them, a warning
message says to the user that the host system is different from which we
have checked so far (and invite to contact us if there is any problem).
In addition to this, if the system is macOS, now it checks if Xcode is
already installed in the host system. If it is not installed, a warning
message informs the user to do that in case a problem/crash in the
configure step occurs. We have found that it is convenient to have Xcode
installed in order to avoid some problems.
|
|
There weren't any conflicts in this merge.
|
|
Tcl/Tk are a set of tools to provide Graphic User Interface (GUI) support
in some software. But they are not yet natively built within Maneage,
primarily because we have higher-priority work right now. GUI tools in
general aren't high on our priority list right now because GUI tools are
generally good for human interaction (which is contrary to the reproducible
philosophy), not automatic analysis (a core concept in reproducibility). So
even later, when we do include Tcl/Tk in Maneage, their direct usage will
be discouraged.
Until this commit, because we don't yet build Tcl/Tk, the default maneage
install of the statistical package R failed on a Debian Stretch, with 6227
repeats of the line:
'/usr/lib//tcl8.5/tclConfig.sh: line 2: dpkg-architecture:
command not found'
To fix this problem (atleast until Tcl/Tk is installed within Maneage), R
is now configured with the '--without-tcltk' option which fixed the
problem. Please see the description above the R installation instructions
in 'reproduce/software/make/high-level.mk' for more.
|
|
Following the previous commit, we recognized that the 'IFS' terms are not
necessary and can be even cause problems. So all their occurances in the
scripts of Maneage have been removed with this commit.
|
|
Until a recent commit, the IFS='"' was added at the start of the variables
in this shell script and as a result, the SPACE character wasn't being used
as a delimiter. This caused a major problem when downloading the tarballs
(all the backup servers were considered as the top link).
With this commit we removed these 'IFS' statements). Because we now check
for the existance of meta-characters in the build directory name, there is
no more problem, and also generally both the calling command and
internally, we have double-qutations around the variable names. So removal
of IFS will not affect the result in this scenario.
This bug was found by Mohammadreza Khellat.
|
|
Only two small conflicts came up:
* The addition of the hardware architecture macro in 'paper.tex' (which
was removed for now, but will be added as the referee has requested
within the text).
* The usage of "" around directory variables in 'paper.mk'.
|
