| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Until now, in order to build Ghostscript, the project used the host's Xorg
libraries. This was because we hadn't yet added the necessary build rules
for them.
With this commit, the instructions to build the necessary Xorg libraries
for Ghostscript have also been added. Also, the shared Ghostscript library
has been built with this commit and two sets of standard fonts are also
included, setting us on the path to build TeXLive from source later.
This task was done with the help and support of Raul Infante-Sainz.
|
|
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause
conflicts to your project if you have changed the software building
Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and
'python.mk'). If your project has only added analysis, it shouldn't be
affected.
This is a large commit, involving a long series of corrections in a
differnt branch which is now finally being merged into the core Maneage
branch. All changes were related and came up naturally as the low-level
infrastructure was improved. So separating them in the end for the final
merge would have been very time consuming and we are merging them as one
commit.
In general, the software building Makefiles are now much more easier to
read, modify and use, along with several new features that have been
added. See below for the full list.
- Until now, Maneage needed the host to have a 'make' implementation
because Make was necessary to build Lzip. Lzip is then used to
uncompress the source of our own GNU Make. However, in the
minimalist/slim versions of operating systems (for example used to build
Docker images) Make isn't included by default. Since Lzip was the only
program before our own GNU Make was installed, we consulting Antonio
Diaz Diaz (creator of Lzip) and he kindly added the necessary
functionality to a new version of Lzip, which we are using now. Hence we
don't need to assume a Make implementation on the host any more. With
this commit, Lzip and GNU Make are built without Make, allowing
everything else to be safely built with our own custom version of GNU
Make and not using the host's 'make' at all.
- Until recently (Commit 3d8aa5953c4) GNU Make was built in
'basic.mk'. Therefore 'basic.mk' was written in a way that it can be
used with other 'make' implementations also (i.e., important shell
commands starting with '&&' and ending in '\' without any comments
between them!). Furthermore, to help in style uniformity, the rules in
'high-level.mk' and 'python.mk' also followed a similar structure. But
due to the point above, we can now guarantee that GNU Make is used from
the very first Makefile, so this hard-to-read structure has been removed
in the software build recipes and they are much more readable and
edit-friendly now.
- Until now, the default backup servers where at some fixed URLs, on our
own pages or on Gitlab. But recently we uploaded all the necessary
software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is
more suitable for this task (it promises longevity, has a fixed DOI,
while allowing us to add new content, or new software tarball
versions). With this commit, a small script has been written to extract
the most recent Zenodo upload link from the Zenodo DOI and use it for
downloading the software source codes.
- Until now, we primarily used the webpage of each software for
downloading its tarball. But this caused many problems: 1) Some of them
needed Javascript before the download, 2) Some URLs had a complex
dependency on the version number, 3) some servers would be randomly down
for maintenance and etc. So thanks to the point above, we now use the
Zenodo server as the primary download location. However, if a user wants
to use a custom software that is not (yet!) in Zenodo, the download
script gives priority to a custom URL that the users can give as Make
variables. If that variable is defined, then the script will use that
URL before going onto Zenodo. We now have a special place for such URLs:
'reproduce/software/config/urls.conf'. The old URLs (which are a good
documentation themselves) are preserved here, but are commented by
default.
- The software source code downloading and checksum verification step has
been moved into a Make function called 'import-source' (defined in the
'build-rules.mk' and loaded in all software Makefiles). Having taken all
the low-level steps there, I noticed that there is no more need for
having the tarball as a separate target! So with this commit, a single
rule is the only place that needs to be edited/added (greatly
simplifying the software building Makefiles).
- Following task #15272, A new option has been added to the './project'
script called '--all-highlevel'. When this option is given, the contents
of 'TARGETS.conf' are ignored and all the software in Maneage are built
(selected by parsing the 'versions.conf' file). This new option was
added to confirm the extensive changes made in all the software building
recipes and is great for development/testing purposes.
- Many of the software hadn't been tested for a long time! So after using
the newly added '--all-highlevel', we noticed that some need to be
updated. In general, with this commit, 'libpaper' and 'pcre' were added
as new software, and the versions of the following software was updated:
'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in'
shell script was added in 'reproduce/software/shell/' which is installed
with 'libpaper'.
- Even though we intentionally add the necessary flags to add RPATH inside
the built executable at compilation time, some software don't do it
(different software on different operating systems!). Until now, for
historical reasons this check was done in different ways for different
software on GNU/Linux sytems. But now it is unified: if 'patchelf' is
present we apply it. Because of this, 'patchelf' has been put as a
top-level prerequisite, right after Tar and is installed before anything
else.
- In 'versions.conf', GNU Libtool is recognized as 'libtool', but in
'basic.mk', it was 'glibtool'! This caused many confusions and is
corrected with this commit (in 'basic.mk', it is also 'libtool').
- A new argument is added to the './project' script to allow easy loading
of the project's shell and environment for fast/temporary testing of
things in the same environment as the project. Before activating the
project's shell, we completely remove all host environment variables to
simulate the project's environment. It can be called with this command:
'./project shell'. A simple prompt has also been added to highlight that
the user is using the Maneage shell!
|
|
In Commit 105467fe6402 (Software tarballs are downloaded even if not
built), we introduced tests to download the tarballs of software even if
they don't need to be built on the respective host. However some small
typos in the checks existed that could cause a crash on macOS. In
particular in the building of PatchELF and libbsd we had forgot to add the
necessary 'x' before the 'yes' in the conditional to check if a we are on
macOS or not.
With this commit these two checks have been corrected. Also, in the
building of 'isl' and 'mpc', we now check for 'host_cc' (signifying that
the user wants to use their host C compiler for the high-level step)
instead of 'on_mac_os'. The reason is that even on non-macOS systems, a
user may not want to build the C compiler from scratch and use the
'--host-cc' option. In such cases, they don't need to compile 'isl' and
'mpc'.
|
|
Some low-level software aren't necessary on some operating systems, for
example GCC can't be built on macOS, hence we don't build it and the
GCC-only dependencies. Also, on GNU/Linux systems users could configure
with '--host-cc' to avoid all the time it takes to build GCC when doing a
fast test.
Until now, in such cases not only was the software not installed, but the
tarballs of the software were also not downloaded. Hence making the output
of '--dist-software' incomplete (as in bug #58561).
With this commit, we now import all the necessary tarballs, when the
software isn't necessary for the particular system, it won't be built or
cited, but its tarball will be present anyway, thus allowing the output of
'--dist-software' to be complete.
|
|
After trying a clean build of Maneage in a Docker image (with a minimal
debian:stable-20200607-slim OS), I noticed that the building of OpenSSL is
failing because it doesn't find the proper Perl functionality. To fix it,
with this commit, Perl is set as a prerequisite of OpenSSL and this fixed
the problem.
|
|
Until now, Maneage would only build Flock before building everything else
using Make (calling 'basic.mk') in parallel. Flock was necessary to avoid
parallel downloads during the building of software (which could cause
network problems). But after recently trying Maneage on FreeBSD (which is
not yet complete, see bug #58465), we noticed that the BSD implemenation of
Make couldn't parse 'basic.mk' (in particular, complaining with the 'ifeq'
parts) and its shell also had some peculiarities.
It was thus decided to also install our own minimalist shell, Make and
compressor program before calling 'basic.mk'. In this way, 'basic.mk' can
now assume the same GNU Make features that high-level.mk and python.mk
assume. The pre-make building of software is now organized in
'reproduce/software/shell/pre-make-build.sh'.
Another nice feature of this commit is for macOS users: until now the
default macOS Make had problems for parallel building of software, so
'basic.mk' was built in one thread. But now that we can build the core
tools with GNU Make on macOS too, it uses all threads. Furthermore, since
we now run 'basic.mk' with GNU Make, we can use '.ONESHELL' and don't have
to finish every line of a long rule with a backslash to keep variables and
such.
Generally, the pre-make software are now organized like this: first we
build Lzip before anything else: it is downloaded as a simple '.tar' file
that is not compressed (only ~400kb). Once Lzip is built, the pre-make
phase continues with building GNU Make, Dash (a minimalist shell) and
Flock. All of their tarballs are in '.tar.lz'. Maneage then enters
'basic.mk' and the first program it builds is GNU Gzip (itself packaged as
'.tar.lz'). Once Gzip is built, we build all the other compression software
(all downloaded as '.tar.gz'). Afterwards, any compression standard for
other software is fine because we have it.
In the process, a bug related to using backup servers was found in
'reproduce/analysis/bash/download-multi-try' for calling outside of
'basic.mk' and removed Bash-specific features. As a result of that bug-fix,
because we now have multiple servers for software tarballs, the backup
servers now have their own configuration file in
'reproduce/software/config/servers-backup.conf'. This makes it much easier
to maintain the backup server list across the multiple places that we need
it.
Some other minor fixes:
- In building Bzip2, we need to specify 'CC' so it doesn't use 'gcc'.
- In building Zip, the 'generic_gcc' Make option caused a crash on FreeBSD
(which doesn't have GCC).
- We are now using 'uname -s' to specify if we are on a Linux kernel or
not, if not, we are still using the old 'on_mac_os' variable.
- While I was trying to build on FreeBSD, I noticed some further
corrections that could help. For example the 'makelink' Make-function
now takes a third argument which can be a different name compared to the
actual program (used for examle to make a link to '/usr/bin/cc' from
'gcc'.
- Until now we didn't know if the host's Make implementation supports
placing a '@' at the start of the recipe (to avoid printing the actual
commands to standard output). Especially in the tarball download phase,
there are many lines that are printed for each download which was really
annoying. We already used '@' in 'high-level.mk' and 'python.mk' before,
but now that we also know that 'basic.mk' is called with our custom GNU
Make, we can use it at the start for a cleaner stdout.
- Until now, WCSLIB assumed a Fortran compiler, but when the user is on a
system where we can't install GCC (or has activated the '--host-cc'
option), it may not be present and the project shouldn't break because
of this. So with this commit, when a Fortran compiler isn't present,
WCSLIB will be built with the '--disable-fortran' configuration option.
This commit (task #15667) was completed with help/checks by Raul
Infante-Sainz and Boud Roukema.
|
|
One of the main reasons to building Maneage is to properly
acknowledge/attribute the authors of software in research. So we have
adopted a standard of never referring to the GNU-based operating systems
running the Linux kernel simply as "Linux", we avoid terms like "Open
Sourse" and use Free Software instead (in the same spirit).
With this commit, a few instances of the cases above have been corrected,
they had slipped through our fingers when we initially imported them into
the project. In the special case of the "Journal for Open Source Software",
we simply replaced it with its abbreviation (JOSS). This was done because
in effect we were generally using journal name abbreviations in almost all
the citations already. To avoid any inconsistancies, the names of the three
other journals that weren't abbreviated are also abbreviated.
|
|
With this commit, Maneage now includes instructions to build the memory
tracing tool Valgrind and the program 'patch' (to apply corrections/patches
in text files and in particular the sources of programs).
For this version of Valgrind, some patches were necessary for an interface
with OpenMPI 2.x (which is the case now). Also note that this version of
Valgrind's checks can fail with GCC 10.1.x (when using '--host-cc'), and
the failures aren't due to internal problems but due to how the tests are
designed (https://bugs.gentoo.org/707598). So currently if any of
Valgrind's checks fail, Maneage still assumes that Valgrind was built and
installed successfully.
While testing on macOS, we noticed that it needs the macOS-specific 'mig'
program which we can't build in Maneage. DESCRIPTION: The mig command
invokes the Mach Interface Generator to generate Remote Procedure Call
(RPC) code for client-server style Mach IPC from specification files. So a
symbolic link to the system's 'mig' is now added to the project's programs
on macOS systems.
This commit's build of Patch and Valgrind has been tested on two GNU/Linux
distributions (Debian and ArchLinux) as well as macOS.
Work on this commit started by Boud Roukema, but also involved tests and
corrections by Mohammad Akhlaghi and Raul Infante-Sainz.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until now Maneage used the host's GNU Gettext if it was present. Gettext is
a relatively low-level software that enables programs to print messages in
different languages based on the host environment. Even though it has not
direct effect on the running of the software for Maneage and the lanugage
environment in Maneage is pre-determined, it is necessary to have it
because if the basic programs see it in the host they will link with it and
will have problems if/when the host's Gettext is updated.
With this commit (which is actually a squashed rebase of 9 commits by Raul
and Mohammad), Gettext and its two extra dependencies (libxml2 and
libunistring) are now installed within Maneage as a basic software and
built before GNU Bash. As a result, all programs built afterwards will
successfully link with our own internal version of Gettext and
libraries. To get this working, some of the basic software dependencies had
to updated and re-ordered and it has been tested in both GNU/Linux and
macoS.
Some other minor issues that are fixed with this commit
- Until this commit, when TeX was not installed, the warning message
saying how to run the configure step in order to re-configure the
project was not showing the option `-e'. However, the use of this option
is more convenient than entering the top-build directory and etc every
time. So with this commit, the warning message has been changed in order
use the option `-e' in the re-configure of the project.
- Until now, on macOS systems, Bash was not linking with our internally
built `libncurses'. With this commit, this has been fixed by setting
`--withcurses=yes' for Bash's configure script.
|
|
Until now, when you changed the version of a software in an already-built
system, its tarball would be downloaded, but it wouldn't actually
build. The only way would be to force the build by deleting the main target
of that file (under `.local/version-info/TYPE/PROGRAM'). This was because
the tarballs were an order-only prerequisite which was implemented some
time ago based on some theoretical argument that if the tarball dates
changes, the software should not be rebuilt (because we check the
checksum).
However, the problems this causes are more than those it solves: Users may
forget to delete the main target of the program and mistakenly think that
they are using the new version. The fact that all the numbers going into
the paper also contain this number further hides this.
With this commit, tarballs are no longer order-only and any time a version
of a software is updated, it will be automatically built and not cause
confusion and manual intervention by the users. As a result of this change,
I also had to correct the way we find the tarball from the list of
prerequisites.
|
|
Until this commit, the configure step would fail with an error when
compiling libgit2 on a test system. The origin of this bug, on the OS that
was tested, appears to be that in OpenSSL Version 1.1.1a, openssl/ec.h
fails to include openssl/openconf.h. The bug is described in more detail at
https://savannah.nongnu.org/bugs/index.php?58263
With this commit, this is fixed by manually inserting a necessary
components. In particular, `sed` is used to insert a preprocessor
instruction into `openssl/openconf.h`, defining `DEPRECATED_1_2_0(f)`, for
an arbitrary section of code `f`, to include that code rather than exclude
it or warn about it.
This commit is valid provided that openssl remains at a version earlier
than 1.2.0. Starting at version 1.2.0, deprecation warnings should be run
normally. We have thus moved the version of OpenSSL in `versions.conf' to
the section for programs that need to be manually checked for version
updates with a note to remind the user when reaching that version.
Other packages that use OpenSSL may benefit from this commit, not just
libgit2.
|
|
Until now, if GCC couldn't be built for any reason, Maneage would crash and
the user had no way forward. Since GCC is complicated, it may happen and is
frustrating to wait until the bug is fixed. Also, while debugging Maneage,
when we know GCC has no problem, because it takes so long, it discourages
testing.
With this commit, we have re-activated the `--host-cc' option. It was
already defined in the options of `./project', but its affect was nullified
by hard-coding it to zero in the configure script on GNU/Linux systems. So
with this commit that has been removed and the user can use their own C
compiler on a GNU/Linux operating system also.
Furthermore, to inform the user about this option and its usefulness, when
GCC fails to build, a clear warning message is printed, instructing the
user to post the problem as a bug and telling them how to continue building
the project with the `--host-cc' option.
|
|
Until Commit 3409a54 (from yesterday), pkg-config was found correctly in
`reproduce/software/make/basic.mk` by searching for `pkg`. However, commit
a21ea20 made an improvement in the regular expression for relating package
names and download filenames, and the string `pkg-config` with the new
regex no longer simplifies to `pkg`. The result of this was that the
basic.mk could not find `pkg-config` in the list of packages, since it was
still listed as `pkg`. This blocked downloading for a system without
pkg-config preloaded.
With this commit (of just a few bytes), the bug is fixed.
|
|
Until now, the sed script for determining URL download rules in the three
software building Makefiles (`basic.mk', `high-level.mk' and `python.mk')
considered package names such as `fftw-3...` and `fftw2-2.1...` to be
identical. As the example above shows, this would make it hard to include
some software that may hav conflicting non-number names.
With this commit, the SED script that is used to separate the version from
the tarball name only matches numbers that are after a dash
(`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but
`fftw-3-...` and `fftw2-2.1...` to be different. As a result of this
change, the `elif' check for some of the other programs like `m4', or
`help2man' was also corrected in all three Makefiles.
While doing this check on all the software, we noticed that `zlib-version'
is being repeated two times in `version.conf' so it was removed. It caused
no complications, because both were the same number, but could lead to bugs
later.
|
|
Until now, throughout Maneage we were using the old name of "Reproducible
Paper Template". But we have finally decided to use Maneage, so to avoid
confusion, the name has been corrected in `README-hacking.md' and also in
the copyright notices.
Note also that in `README-hacking.md', the main Maneage branch is now
called `maneage', and the main Git remote has been changed to
`https://gitlab.com/maneage/project' (this is a new GitLab Group that I
have setup for all Maneage-related projects). In this repository there is
only one `maneage' branch to avoid complications with the `master' branch
of the projects using Maneage later.
|
|
Of the GCC dynamically linked libraries we need to manually add RPATH to
all and for `libstdc++' we also need to tell it to link with
`libiconv'. Until now, the conditional to check for libstdc++ was not
working and thus libiconv wasn't been added to it.
With this commit the conditional has been corrected and is now
working. Also, to help in reading the logs, an echo statement was added
after every call to PatchELF.
|
|
Until now, when a the raw tarball of some software wasn't usable, I would
put it under my own webpage, or `akhlaghi.org/reproduce-software'. That
same address was also used as a backup server. However, now the project has
a proper name: Maneage. So I changed the directory on my own server to
`akhlaghi.org/maneage-software'.
With this commit, this new address has replaced the old one. But to avoid
crashes in projects that haven't yet merged with the main Maneage branch,
the old `reproduce-software' still works (its actually a symbolic link to
the new directory now).
|
|
Until a few commits ago, PatchELF was built statically because it was used
to patch `libstdc++' at the end of the GCC building phase, but PatchELF
also depends on `libstdc++', so it would crash. However, recently when
patching the GCC libraries, we don't directly apply Patchelf to the
library, first we copy it to a temporary place, do the patching, then put
it in its proper place. So the problem above won't happen any more.
With this commit, I am thus removing the static flag from patchelf and
letting it built dynamically all the time. The main problem was that some
systems don't have a static C++ library, so PatchELF couldn't be built
statically. Instead of adding more checks, we just fixed the core
foundation of the problem.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
|
Until now, the M4 that was built on macOS had internal problems (as
discussed in #1): it would simply print `Abort trap: 6' in the output and
abort. After looking at the build of Homebrew, I noticed that they apply a
patch (correct one line) to fix this problem. To be able to apply that
patch on macOS systems, I had fully open up the build recipe of M4 and
atleast on the testing system, it was built successfully.
Also, after successfully building M4, and thus Autoconf and thus Minizip,
we were able to build XLSX I/O on a macOS and found out that the internal
library's full address wasn't being put in the libraries and
executables. With this commit, we now use macOS's `install_name_tool' to
correct the positions of the two `libxlsxio_*' libraries in all its
executables.
This commit was originally written by Mohammad Akhlaghi
|
|
Until now, like all software on GNU/Linux systems GCC would be built in RAM
(to speed up the build slightly and also not put too much stress on the
HDDs/SSDs). But some systems don't have enough RAM for building GCC and
will complain and crash.
With this commit, we have added a check on the amount of free space in the
`build_tmp' directory (which will be `/dev/shm' on GNU/Linux systems). If
the amount of free space isn't more than 10GB, then GCC won't be built
there and a temporary directory will be built under the `$(BDIR)/software'
directory for it.
This bug was found by Zahra Sharbaf.
This fixes bug #57853.
|
|
Until now we were mistakenly reporting the version of SED instead of
Texinfo.
With this commit, we corrected it!
This was reported by Raul Infante Sainz.
|
|
Until now, we defined `LIBRARY_PATH' to fix the problem of the `ld' linker
of Binutils needing several `*crt*.o' files to run. However, some software
(for example ImageMagick) over-write `LIBRARY_PATH', therefore there is no
other way than to put a link to these necessary files in our local build
directory.
With this commit, we fixed the problem by putting a link to the system's
relevant files in the local library directory. This fixed the problem with
ImageMagick. Later, when we build the GNU C Library in the project, we
should remove this step.
This bug reported by Raul Castellanos Sanchez.
|
|
Until now, the main download script could only check one server for the
given URL. However, ultimately the actual server that a file is downloaded
from is irrelevant for this project: we actually check its
checksum. Especially in the case of software (which are distributed over
many servers), this can usually be very annoying: the servers may not
properly communicate with the running system and even the 10 trials won't
be enough.
With this commit, the download script
`reproduce/analysis/bash/download-multi-try' can take a new optional
argument (a 5th argument). It assumes this argument is a space-separated
list of server(s) to use as backup for the original URL. When downloading
from the original URL fails, it will look into this list and try
downloading the same file from each given server.
|
|
Until now the shell scripts in the software building phase were in the
`reproduce/software/bash' directory. But given our recent change to a
POSIX-only start, the `configure.sh' shell script (which is the main
component of this directory) is no longer written with Bash.
With this commit, to fix that problem, that directory's name has been
changed to `reproduce/software/shell'.
|
|
Until now, the initial project scripts were primarily tested with GNU
Bash. But Bash is not generally available on all systems (it has many
features beyond POSIX). Because of this, effectively we were imposing the
requirement on the user that they must have Bash installed. We recently
started this with setting the shebang of `project' and
`reproduce/software/bash/configure.sh' to `/bin/sh'. After doing so, Raul
and Gaspar reported an error on their systems.
To fix the problem, I installed Dash (a minimalist POSIX-compliant shell)
on my computer and temporarily set the shebangs to `/bin/dash', ran the
project configuration step and fixed all issues that came up. With this
commit, it can go all the way to building GCC on my system's Dash. After
this stage (when `high-level.mk' is called), there is no problem, because
we have our own version of GNU Bash and that installed version is used.
Probably some more issues still remain and will hopefully be found in the
future.
While doing this, I also noticed the following two minor issues:
- The `./project configure' option `--input-dir' was not recognized
because it was mistakenly checking `--inputdir'. It has been corrected.
- The test C programs now use the `<<EOF' method instead of `echo'.
- In `basic.mk', the extra space between `syspath' and `:=' was removed
(it was an ancient relic!).
|
|
Until now Perl was built after Coreutils, but I recently noticed that
Coreutils actually uses Perl while creating its manpages. So it is now
built before Coreutils.
Also, while testing on an Amazon AWS EC2 server, we noticed that Coreutils
can't build its man page for `md5sum'. The problem was found to be due to
the fact that until now, we weren't actually setting LD_LIBRARY_PATH to our
installed library path in `basic.mk'. Therefore, it would crash because the
server had an older version of OpenSSL than the one that the template's
Coreutils was built with.
In the meantime (while addressing the issues above, because we only had one
thread on the AWS server) I also noticed a few programs that were using a
summarize compilation command (that just prints `CC xxx.c' instead of the
whole command) so I fixed them by adding `V=1'.
This bug was found by Idafen Santana Pérez.
|
|
Until now, the configuration Makefiles (in
`reproduce/software/config/installation' and `reproduce/analysis/config')
had a `.mk' suffix, similar to the workhorse Makefiles. Although they are
indeed Makefiles, but given their nature (to only keep configuration
parameters), it is confusing (especially to early users) for them to also
have a `.mk' (similar to the analysis or software building Makefiles).
To address this issue, with this commit, all the configuration Makefiles
(in those directories) are now given a `.conf' suffix. This is also assumed
for all the files that are loaded.
The configuration (software building) and running of the template have been
checked with this change from scratch, but please report any error that may
not have been noticed.
THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS
FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE
SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES
ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
|
|
GNU Make 4.3 was just announced, so I have updated it here is well. This
was important because until now the installable version was in alpha-mode
(4.2.90), now its a stable version.
|
|
Until now, GCC wouldn't build properly on Debian-based operating systems
because `ld' needed to link with several necessary C library features like
`crti.o' and `crtn.o' (this is an `ld' issue, not GCC). The solution is to
add the directory containing them to `LIBRARY_PATH'. In the previous
commit, I actually searched for these files, but while testing on another
system, I noticed that it can be problematic (other architectures may
exist).
With this commit, we are actually finding the build architecture of the
running GCC (which is the same as the `ld') and using that to fix a fixed
directory to `LIBRARY_PATH'.
|
|
Now that its 2020, its necessary to include this year in the copyright
statements.
|
|
Until now, while building Perl, the `-Dlddlflags="-shared $$LDFLAGS"'
option was being used for all systems. However, this caused `symbol(s) not
found for architecture x86_64' problems on macOS systems.
With this commit, this configure option is only passed for GNU/Linux
systems. With it, Perl can be built nicely on both GNU/Linux and macOS.
|
|
Until now when building Matplotlib on macOS systems, we were using the
default C compiler. However, while Yahya Sefidbakht (previously) and
Mahdieh Nabavi (now) were trying to build the template, on their macOS
using the GNU Compiler Collection (GCC), we found that Matplotlib needs
special macOS headers that GCC doesn't recognize.
With this commit, when Matplotlib is being built on macOS systems, it uses
`clang' and this fixed the problem (so far checked on Mahdieh's machine).
|
|
While working on a different branch to build the GNU C Library, I noticed a
few places in the template that need corrections which are now applied:
1. A new-line character after the "C compiler works" notice at the start
of the configure script.
2. Removing possible `::' in the `LD_LIBRARY_PATH' definition of
`basic.mk'. Note that its not necessary in the other steps because we
don't use any outside-defined `LD_LIBRARY_PATH'.
3. Building GMP for C++ and also with `--enable-fat'.
4. Removing the unpacked Perl tarball directory after its installation.
|
|
Perl is necessary to build Texinfo and later to build LaTeX. Until now we
were just using the host operating system's installation of Perl, but in
some instances that Perl can be too old and not suppor the features
necessary. With this commit, Perl is now built from source during the basic
installation step of the template.
This was reported by Idafen Santana Pérez, after trying the pipeline on an
Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
|
|
Until now, the tarballs were the first normal prerequisite of the
software. As a result if their date changed, the whole software would be
re-built. However, for tarballs specifically, we actually check their
contents with a checksum, so their date is irrelevant (if its newer than
the built program, but has the same checksum, there is no need to re-build
the software).
Also, calling the tarball name as an argument to the building process (for
example `gbuild') was redundant. It is now automatically found from the
list of order-only prerequisites within `gbuild' and `cbuild' (similar to
how it was previously found in the `pybuild' for Python building).
A `README.md' file has also been placed in `reproduce/software/make' to
help describe the shared properties of the software building
Makefiles. This will hopefully grow much larger in the future.
|
|
The tarball of HEALPix includes multiple languages and doesn't include the
ready-to-run GNU Build System by default, we actually have to build the
`./configure' script for the C/C++ libraries. So it was necessary to also
include GNU Autoconf and GNU Automake as prerequisites of HEALPix.
However, the official GNU Autoconf tarball (dating from 2012) doesn't build
on modern systems, so I just cloned it from its source and bootstrapped it
and built its modern tarball which we are using here.
|
|
Until now, we were assuming that the users would just clone the project in
Git. But after submitting arXiv:1909.11230, and trying to build directly
from the arXiv source, I noticed several problems that wouldn't allow users
to build it automatically. So I tried the build step by step and was able
to find a fix for the several issues that came up.
The scripting parts of the fix were primarily related to the fact that the
unpacked arXiv tarball isn't under version control, so some checks had to
be put there. Also, we wanted to make it easy to remove the extra files, so
an extra `--clean-texdit' option was added to `./project'.
Finally, some manual corrections were necessary (prior to running
`./project', which are now described in `README.md'. Most of the later
steps can be automated and we should do it later, I just don't have enough
time now.
|
|
New versions of astropy, bash, cmake, curl, findutils, gawk, gcc,
ghostscript, git, make, gsl had recently come so they are updated with this
commit.
About GNU Findutils and GNU Make: I was bootstrapping (building the tarball
of) these two separately separately because their standard tarball release
had problems on some systems. Both have been updated now so I am no longer
using my own webpage as their main URL.
A special note about GNU Make. I just noticed that during bootstrapping,
GNU Make would use the fixed version string of `4.2.90' for any commit!!!
But fortunately they have officially released their 4.2.90 version, so we
are safely using their own webpage. The only difference is the compression
format. My old bootstrapped build was `tar.lz', but the standard release is
`tar.gz'.
Also, all the basic programs (installed in `.local/bin') in `basic.mk' are
now existance-only dependencies (after a `|'). Because later programs just
use them at a very basic level, so there is no need to rebuild everything
when Bash gets updated for example.
|
|
Until now, when building PatchELF, we would always require that it be done
statically. However, some systems don't have a static C library available
for linking. This cause a crash in the static building of PatchELF. But a
static PatchELF is necessary for correcting RPATH in GCC's outputs.
With this commit, in the configure script we check if a static C library is
linkable for the compiler. If it isn't then `host_cc' will be set to 1 and
GCC won't be built. We also pass the result of this test to `basic.mk'
(through `good_static_lib'), so if a static C library isn't available, it
builds a dynamically linked PatchELF.
This bug was reported by Elham Saremi.
|
|
Some of the software tarballs are directly available on their webpage (for
example due to build problems on systems, where we had to clone the
software and build its tarball ourselves until the next release). Until
now, only for these software, these tarballs were hosted on
`http://akhlaghi.org/src'. But now, I have moved a clone of the software
backup repository (including all its software) to
`http://akhlaghi.org/reproduce-software'.
To be more clear and have a single place for the backup software, the URL
of those software has also been updated in the project source.
|
|
After making the previous commit, I noticed an extra line (redundantly
defining a wrong `BASH_ENV') that should have been deleted. It has been
corrected.
|
|
Until now the only way to define the environment of the Make recipes was
through the exported Make variables (mostly in `initialize.mk' for the
analysis steps for example). However, there is only so much you can do with
environment variables! In some situations you want slightly more
complicated environment control, like setting an alias or running of
scripts (things that are commonly done in the `~/.bashrc' file of users to
configure their interactive, non-login shells).
With this commit, a `reproduce/software/bash/bashrc.sh' has been defined
for this job (which is currently empty!). Every major Make step of the
project adds this file as the `BASH_ENV' environment variable, so the shell
that is created to execute a recipe first executes this file, then the
recipe. Each top-level Makefile also defines a `PROJECT_STATUS' environment
variable that enables users to limit their envirnoment setup based on the
condition it is being setup (in particular in the early phase of
`basic.mk', where the user can't make any assumption about the programs and
has to write a portable shell script).
|
|
After adding the libiconv library to the template, the C++ library uses
three of its functions (`libiconv', `libiconv_open' and
`libiconv_close'). However, it doesn't explicity link with it inside its
shared library!
I tried by exporting `LIBS=-liconv' before the GCC configure script but it
crashed as soon as it went on to the second GCC building stage (because
this environment variable was no longer present there). I also tried adding
the C++ configure option of `--enable-cstdio' to the GCC configure options
(so it doesn't use iconv according to the manual), but it made no change.
With this commit, as a brute-force solution, `patchelf --add-needed' is run
on the installed `libstdc++.so', so `libiconv.so' is explicitly included
inside the `libstdc++' shared library.
This bug was found by Roberto Baena Galle while trying to load Matplotlib
(which needed the C++ library).
This fixes bug #56702.
|
|
Until now, there was no check on the integrity of the contents of the
downloaded/copied software tarballs, we only relied on the tarball
name. This could be bad for reproducibility and security, for example on
one server the name of a tarball may be the same but with different
content.
With this commit, the SHA512 checksums of all the software are stored in
the newly created `checksums.mk' (similar to how the versions are stored in
the `versions.mk'). The resulting variable is then defined for each
software and after downloading/copying the file we check to see if the new
tarball has the same checksum as the stored value. If it doesn't the script
will crash with an error, informing the user of the problem.
The only limitation now is a bootstrapping problem: if the host system
doesn't already an `sha512sum' executable, we will not do any checksum
verification until we install our `sha512sum' (as part of GNU
Coreutils). All the tarballs downloaded after GNU Coreutils are built will
have their checksums validated. By default almost all GNU/Linux systems
will have a usable `sha512sum' (its part of GNU Coreutils after all for a
long time: from the Coreutils Changelog file atleast since 2013).
This completes task #15347.
|
|
Until now, to work on a project, it was necessary to `./configure' it and
build the software. Then we had to run `.local/bin/make' to run the project
and do the analysis every time. If the project was a shared project between
many users on a large server, it was necessary to call the `./for-group'
script.
This way of managing the project had a major problem: since the user
directly called the lower-level `./configure' or `.local/bin/make' it was
not possible to provide high-level control (for example limiting the
environment variables). This was especially noticed recently with a bug
that was related to environment variables (bug #56682).
With this commit, this problem is solved using a single script called
`project' in the top directory. To configure and build the project, users
can now run these commands:
$ ./project configure
$ ./project make
To work on the project with other users in a group these commands can be
used:
$ ./project configure --group=GROUPNAME
$ ./project make --group=GROUPNAME
The old options to both configure and make the project are still valid. Run
`./project --help' to see a list. For example:
$ ./project configure -e --host-cc
$ ./project make -j8
The old `configure' script has been moved to
`reproduce/software/bash/configure.sh' and is called by the new `./project'
script. The `./project' script now just manages the options, then passes
control to the `configure.sh' script. For the "make" step, it also reads
the options, then calls Make. So in the lower-level nothing has
changed. Only the `./project' script is now the single/direct user
interface of the project.
On a parallel note: as part of bug #56682, we also found out that on some
macOS systems, the `DYLD_LIBRARY_PATH' environment variable has to be set
to blank. This is no problem because RPATH is automatically set in macOS
and the executables and libraries contain the absolute address of the
libraries they should link with. But having `DYLD_LIBRARY_PATH' can
conflict with some low-level system libraries and cause very hard to debug
linking errors (like that reported in the bug report).
This fixes bug #56682.
|
|
Until now we were only setting the `LD_LIBRARY_PATH' environment variable
for GNU/Linux systems. But macOS systems use the `DYLD_LIBRARY_PATH'.
With this commit, for better control over the environment, we are also
fixing `DYLD_LIBRARY_PATH' in all the places that we are setting the
general environment variables.
|
|
Until now, like all other software, PatchELF would install with dynamic
linking. However, PatchELF links with `libstdc++' so on one system, I
noticed that PatchELF gives a segmentation fault and corrupts `libstdc++'
while correcting its RPATH (after installing GCC). The solution is to build
PatchELF statically.
With this commit, we force PatchELF to be built statically (it only
installs on GNU/Linux systems anyway, so there is no problem with static
linking on macOS). This solved the problem on that system.
While looking at its documentation, I also noticed that a new version of
PatchELF has been released after almost three years, so it has been updated
in the template also.
This fixes bug #56673.
|
|
Until this commit, the addion of `-liconv' to `CXXFLAGS' in `high-level.mk'
dependend on `host_cc', but I had forgot that `host_cc' isn't defined for
`high-level.mk'. It is now defined for this Makefile also in the configure
script.
Also, the Standard C++ library depends on `libgcc_s.so.1', so after
building GCC, it was necessary to add Rpath to it.
|
