| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This commit primarily affects the configuration step of Maneage'd projects,
and in particular, updated versions of the many of the software (see
P.S.). So it shouldn't affect your high-level analysis other than the
version bumps of the software you use (and the software's possibly
improve/changed behavior).
The following software (and thus their dependencies) couldn't be updated as
described below:
- Cryptography: isn't building because it depends on a new
setuptools-rust package that has problems
(https://savannah.nongnu.org/bugs/index.php?61731), so it has been
commented in 'versions.conf'.
- SecretStorage: because it depends on Cryptography.
- Keyring: because it depends on SecretStorage.
- Astroquery: because it depends on Keyring.
This is a "squashed" commit after rebasing a development branch of 60
commits corresponding to a roughly two-month time interval. The following
people contributed to this branch.
- Boudewijn Roukema added all the R software infrastructure and the R
packages, as well as greatly helping in fixing many bugs during the
update.
- Raul Infante-Sainz helped in testing and debugging the build.
- Pedram Ashofteh Ardakani found and fixed a bug.
- Zahra Sharbaf helped in testing and found several bugs.
Below a description of the most noteworthy points is given.
- Software tarballs: all updated software now have a unified format
tarball (ustar; if not possible, pax) and unified compression (Lzip) in
Maneage's software repository in Zenodo
(https://doi.org/10.5281/zenodo.3883409). For more on this See
https://savannah.nongnu.org/task/?15699 . This won't affect any extra
software you would like to add; you can use any format recognized by
GNU Tar, and all common compression algorithms. This new requirement is
only for software that get merged to the core Maneage branch.
- Metastore (and thus libbsd and libmd) moved to highlevel: Metastore
(and the packages it depends on) is a high-level product that is only
relevant during the project development (like Emacs!): when the user
wants the file meta data (like dates) to be unchanged after checking
out branches. So it should be considered a high-level software, not
basic. Metastore also usually causes many more headaches and error
messages, so personally, I have stopped using it! Instead I simply
merge my branches in a separate clone, then pull the merge commit: in
this way, the files of my project aren't re-written during the checkout
phase and therefore their dates are untouched (which can conflict with
Make's dates on configuration files).
- The un-official cloned version of Flex (2.6.4-91 until this commit) was
causing problems in the building of Netpbm, so with this commit, it has
been moved back to version 2.6.4.
- Netpbm's official page had version 10.73.38 as the latest stable
tarball that was just released in late 2021. But I couldn't find our
previously-used version 10.86.99 anywhere (to see when it was released
and why we used it! Its at last more than one year old!). So the
official stable version is being used now.
- Improved instructions in 'README.md' for building software environment
in a Docker container (while having project source and output data
products on the local system; including the usage of the host's
'/dev/shm' to speed up temporary operations).
- Until now, the convention in Maneage was to put eight SPACE characters
before the comment lines within recipes. This was done because by
default GNU Emacs (also many other editors) show a TAB as eight
characters. However, in other text editors, online browsers, or even
the Git diff, a TAB can correspond to a different number of
characters. In such cases, the Maneage recipes wouldn't look too
interesting (the comments and the recipe commands would show a
different indentation!).
With this commit, all the comment lines in the Makefiles within the
core Maneage branch have a hash ('#') as their first character and a
TAB as the second. This allows the comment lines in recipes to have the
same indentation as code; making the code much more easier to read in a
general scenario including a 'git diff' (editor agnostic!).
P.S. List of updated software with their old and new versions
- Software with no version update are not mentioned.
- The old version of newly added software are shown with '--'.
Name (Basic) Old version New version
------------ ----------- -----------
Bzip2 1.0.6 1.0.8
CURL 7.71.1 7.79.1
Dash 0.5.10.2 0.5.11.5
File 5.39 5.41
Flock 0.2.3 0.4.0
GNU Bash 5.0.18 5.1.8
GNU Binutils 2.35 2.37
GNU Coreutils 8.32 9.0
GNU GCC 10.2.0 11.2.0
GNU M4 1.4.18 1.4.19
GNU Readline 8.0 8.1.1
GNU Tar 1.32 1.34
GNU Texinfo 6.7 6.8
GNU diffutils 3.7 3.8
GNU findutils 4.7.0 4.8.0
GNU gmp 6.2.0 6.2.1
GNU grep 3.4 3.7
GNU gzip 1.10 1.11
GNU libunistring 0.9.10 1.0
GNU mpc 1.1.0 1.2.1
GNU mpfr 4.0.2 4.1.0
GNU nano 5.2 6.0
GNU ncurses 6.2 6.3
GNU wget 1.20.3 1.21.2
Git 2.28.0 2.34.0
Less 563 590
Libxml2 2.9.9 2.9.12
Lzip 1.22-rc2 1.22
OpenSLL 1.1.1a 3.0.0
Patchelf 0.10 0.13
Perl 5.32.0 5.34.0
Podlators -- 4.14
Name (Highlevel) Old version New version
---------------- ----------- -----------
Apachelog4cxx 0.10.0-603 0.12.1
Astrometry.net 0.80 0.85
Boost 1.73.0 1.77.0
CFITSIO 3.48 4.0.0
Cmake 3.18.1 3.21.4
Eigen 3.3.7 3.4.0
Expat 2.2.9 2.4.1
FFTW 3.3.8 3.3.10
Flex 2.6.4-91 2.6.4
Fontconfig 2.13.1 2.13.94
Freetype 2.10.2 2.11.0
GNU Astronomy Utilities 0.12 0.16.1-e0f1
GNU Autoconf 2.69.200-babc 2.71
GNU Automake 1.16.2 1.16.5
GNU Bison 3.7 3.8.2
GNU Emacs 27.1 27.2
GNU GDB 9.2 11.1
GNU GSL 2.6 2.7
GNU Help2man 1.47.11 1.48.5
Ghostscript 9.52 9.55.0
ICU -- 70.1
ImageMagick 7.0.8-67 7.1.0-13
Libbsd 0.10.0 0.11.3
Libffi 3.2.1 3.4.2
Libgit2 1.0.1 1.3.0
Libidn 1.36 1.38
Libjpeg 9b 9d
Libmd -- 1.0.4
Libtiff 4.0.10 4.3.0
Libx11 1.6.9 1.7.2
Libxt 1.2.0 1.2.1
Netpbm 10.86.99 10.73.38
OpenBLAS 0.3.10 0.3.18
OpenMPI 4.0.4 4.1.1
Pixman 0.38.0 0.40.0
Python 3.8.5 3.10.0
R 4.0.2 4.1.2
SWIG 3.0.12 4.0.2
Util-linux 2.35 2.37.2
Util-macros 1.19.2 1.19.3
Valgrind 3.15.0 3.18.1
WCSLIB 7.3 7.7
Xcb-proto 1.14 1.14.1
Xorgproto 2020.1 2021.5
Name (Python) Old version New version
------------- ----------- -----------
Astropy 4.0 5.0
Beautifulsoup4 4.7.1 4.10.0
Beniget -- 0.4.1
Cffi 1.12.2 1.15.0
Cryptography 2.6.1 36.0.1
Cycler 0.10.0 0.11.0+}
Cython 0.29.21 0.29.24
Esutil 0.6.4 0.6.9
Extension-helpers -- 0.1
Galsim 2.2.1 2.3.3
Gast -- 0.5.3
Jinja2 -- 3.0.3
MPI4py 3.0.3 3.1.3
Markupsafe -- 2.0.1
Numpy 1.19.1 1.21.3
Packaging -- 21.3
Pillow -- 8.4.0
Ply -- 3.11
Pyerfa -- 2.0.0.1
Pyparsing 2.3.1 3.0.4
Pythran -- 0.11.0
Scipy 1.5.2 1.7.3
Setuptools 41.6.0 58.3.0
Six 1.12.0 1.16.0
Uncertainties 3.1.2 3.1.6
Wheel -- 0.37.0
Name (R) Old version New version
-------- ----------- -----------
Cli -- 2.5.0
Colorspace -- 2.0-1
Cowplot -- 1.1.1
Crayon -- 1.4.1
Digest -- 0.6.27
Ellipsis -- 0.3.2
Fansi -- 0.5.0
Farver -- 2.1.0
Ggplot2 -- 3.3.4
Glue -- 1.4.2
GridExtra -- 2.3
Gtable -- 0.3.0
Isoband -- 0.2.4
Labeling -- 0.4.2
Lifecycle -- 1.0.0
Magrittr -- 2.0.1
MASS -- 7.3-54
Mgcv -- 1.8-36
Munsell -- 0.5.0
Pillar -- 1.6.1
R-Pkgconfig -- 2.0.3
R6 -- 2.5.0
RColorBrewer -- 1.1-2
Rlang -- 0.4.11
Scales -- 1.1.1
Tibble -- 3.1.2
Utf8 -- 1.2.1
Vctrs -- 0.3.8
ViridisLite -- 0.4.0
Withr -- 2.4.2
|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
Less is rarely used in non-interactive mode and is primarily intended for
interactively viewing large files. So its need within Maneage (for batch
processing) wasn't often felt until now. However, when running './project
shell' (which completely closes-off the outside environment), or building a
Maneage'd project within a minimal container that doesn't have less, it
becomes hard to use Git (and in particular its 'diff' output which depends
on 'less').
With this commit, Less has been added as a dependency of Git in
'basic.mk'. In total its built product is roughly 800KB and builds within a
second or two. So it isn't a burden on any project. But it can be very
useful when the projects are being developed within the Maneage environment
itself.
|
|
While a project is under development, the raw analysis software are not the
only necessary software in a project. We also need tools to all the edit
plain-text files within the Maneaged project. Usually people use their
operating system's plain-text editor. However, when working on the project
on a new computer, or in a container, the plain-text editors will have
different versions, or may not be present at all! This can be very annoying
and frustrating!
With this commit, Maneage now installs GNU Nano as part of the basic
tools. GNU Nano is a very simple and small plain text editor (the installed
size is only ~3.5MB, and it is friendly to new users). Therefore, any
Maneaged project can assume atleast Nano will be present (in particular
when no editor is available on the running system!). GNU Emacs and VIM
(both without extra dependencies, in particular without GUI support) are
also optionally available in 'high-level.mk' (by adding them to
'TARGETS.conf').
The basic idea for the more advanced editors (Emacs and VIM) is that
project authors can add their favorite editor while they are working on the
project, but upon publication they can remove them from 'TARGETS.conf'.
A few other minor things came up during this work and are now also fixed:
- The 'file' program and its libraries like 'libmagic' were linking to
system's 'libseccomp'! This dependency then leaked into Nano (which
depends on 'libmagic'). But this is just an extra feature of 'file',
only for the Linux kernel. Also, we have no dependency on it so far. So
'file' is not configured to not build with 'libseccomp'.
- A typo was fixed in the line where the physical core information is
being read on macOS.
- The top-level directories when running './project shell' are now quoted
(in case they have special characters).
|
|
It was a long time that the Maneage software versions hadn't been updated.
With this commit, the versions of all basic software were checked and 17 of
that had newer versions were updated. Also, 16 high-level programs and
libraries were updated as well as 7 Python modules. The full list is
available below.
Basic Software (affecting all projects)
---------------------------------------
bash 5.0.11 -> 5.0.18
binutils 2.32 -> 2.35
coreutils 8.31 -> 8.32
curl 7.65.3 -> 7.71.1
file 5.36 -> 5.39
gawk 5.0.1 -> 5.1.0
gcc 9.2.0 -> 10.2.0
gettext 0.20.2 -> 0.21
git 2.26.2 -> 2.28.0
gmp 6.1.2 -> 6.2.0
grep 3.3 -> 3.4
libbsd 0.9.1 -> 0.10.0
ncurses 6.1 -> 6.2
perl 5.30.0 -> 5.32.0
sed 4.7 -> 4.8
texinfo 6.6 -> 6.7
xz 5.2.4 -> 5.2.5
Custom programs/libraries
-------------------------
astrometrynet 0.77 -> 0.80
automake 0.16.1 -> 0.16.2
bison 3.6 -> 3.7
cfitsio 3.47 -> 3.48
cmake 3.17.0 -> 3.18.1
freetype 2.9 -> 2.10.2
gdb 8.3 -> 9.2
ghostscript 9.50 -> 9.52
gnuastro 0.11 -> 0.12
libgit2 0.28.2 -> 1.0.1
libidn 1.35 -> 1.36
openmpi 4.0.1 -> 4.0.4
R 3.6.2 -> 4.0.2
python 3.7.4 -> 3.8.5
wcslib 6.4 -> 7.3
yaml 0.2.2 -> 0.2.5
Python modules
--------------
cython 0.29.6 -> 0.29.21
h5py 2.9.0 -> 2.10.0
matplotlib 3.1.1 -> 3.3.0
mpi4py 3.0.2 -> 3.0.3
numpy 1.17.2 -> 1.19.1
pybind11 2.4.3 -> 2.5.0
scipy 1.3.1 -> 1.5.2
|
|
Until now, in order to build Ghostscript, the project used the host's Xorg
libraries. This was because we hadn't yet added the necessary build rules
for them.
With this commit, the instructions to build the necessary Xorg libraries
for Ghostscript have also been added. Also, the shared Ghostscript library
has been built with this commit and two sets of standard fonts are also
included, setting us on the path to build TeXLive from source later.
This task was done with the help and support of Raul Infante-Sainz.
|
|
Until this commit, there was a problem when building Bison in parallel in
macOS systems. With this commit, this problem has been fixed by updating
Bison to its most recent version (3.6).
|
|
POSSIBLE EFFECT ON YOUR PROJECT: The changes in this commit may only cause
conflicts to your project if you have changed the software building
Makefiles in your project's branch (e.g., 'basic.mk', 'high-level.mk' and
'python.mk'). If your project has only added analysis, it shouldn't be
affected.
This is a large commit, involving a long series of corrections in a
differnt branch which is now finally being merged into the core Maneage
branch. All changes were related and came up naturally as the low-level
infrastructure was improved. So separating them in the end for the final
merge would have been very time consuming and we are merging them as one
commit.
In general, the software building Makefiles are now much more easier to
read, modify and use, along with several new features that have been
added. See below for the full list.
- Until now, Maneage needed the host to have a 'make' implementation
because Make was necessary to build Lzip. Lzip is then used to
uncompress the source of our own GNU Make. However, in the
minimalist/slim versions of operating systems (for example used to build
Docker images) Make isn't included by default. Since Lzip was the only
program before our own GNU Make was installed, we consulting Antonio
Diaz Diaz (creator of Lzip) and he kindly added the necessary
functionality to a new version of Lzip, which we are using now. Hence we
don't need to assume a Make implementation on the host any more. With
this commit, Lzip and GNU Make are built without Make, allowing
everything else to be safely built with our own custom version of GNU
Make and not using the host's 'make' at all.
- Until recently (Commit 3d8aa5953c4) GNU Make was built in
'basic.mk'. Therefore 'basic.mk' was written in a way that it can be
used with other 'make' implementations also (i.e., important shell
commands starting with '&&' and ending in '\' without any comments
between them!). Furthermore, to help in style uniformity, the rules in
'high-level.mk' and 'python.mk' also followed a similar structure. But
due to the point above, we can now guarantee that GNU Make is used from
the very first Makefile, so this hard-to-read structure has been removed
in the software build recipes and they are much more readable and
edit-friendly now.
- Until now, the default backup servers where at some fixed URLs, on our
own pages or on Gitlab. But recently we uploaded all the necessary
software to Zenodo (https://doi.org/10.5281/zenodo.3883409) which is
more suitable for this task (it promises longevity, has a fixed DOI,
while allowing us to add new content, or new software tarball
versions). With this commit, a small script has been written to extract
the most recent Zenodo upload link from the Zenodo DOI and use it for
downloading the software source codes.
- Until now, we primarily used the webpage of each software for
downloading its tarball. But this caused many problems: 1) Some of them
needed Javascript before the download, 2) Some URLs had a complex
dependency on the version number, 3) some servers would be randomly down
for maintenance and etc. So thanks to the point above, we now use the
Zenodo server as the primary download location. However, if a user wants
to use a custom software that is not (yet!) in Zenodo, the download
script gives priority to a custom URL that the users can give as Make
variables. If that variable is defined, then the script will use that
URL before going onto Zenodo. We now have a special place for such URLs:
'reproduce/software/config/urls.conf'. The old URLs (which are a good
documentation themselves) are preserved here, but are commented by
default.
- The software source code downloading and checksum verification step has
been moved into a Make function called 'import-source' (defined in the
'build-rules.mk' and loaded in all software Makefiles). Having taken all
the low-level steps there, I noticed that there is no more need for
having the tarball as a separate target! So with this commit, a single
rule is the only place that needs to be edited/added (greatly
simplifying the software building Makefiles).
- Following task #15272, A new option has been added to the './project'
script called '--all-highlevel'. When this option is given, the contents
of 'TARGETS.conf' are ignored and all the software in Maneage are built
(selected by parsing the 'versions.conf' file). This new option was
added to confirm the extensive changes made in all the software building
recipes and is great for development/testing purposes.
- Many of the software hadn't been tested for a long time! So after using
the newly added '--all-highlevel', we noticed that some need to be
updated. In general, with this commit, 'libpaper' and 'pcre' were added
as new software, and the versions of the following software was updated:
'boost', 'flex', 'libtirpc', 'openblas' and 'lzip'. A 'run-parts.in'
shell script was added in 'reproduce/software/shell/' which is installed
with 'libpaper'.
- Even though we intentionally add the necessary flags to add RPATH inside
the built executable at compilation time, some software don't do it
(different software on different operating systems!). Until now, for
historical reasons this check was done in different ways for different
software on GNU/Linux sytems. But now it is unified: if 'patchelf' is
present we apply it. Because of this, 'patchelf' has been put as a
top-level prerequisite, right after Tar and is installed before anything
else.
- In 'versions.conf', GNU Libtool is recognized as 'libtool', but in
'basic.mk', it was 'glibtool'! This caused many confusions and is
corrected with this commit (in 'basic.mk', it is also 'libtool').
- A new argument is added to the './project' script to allow easy loading
of the project's shell and environment for fast/temporary testing of
things in the same environment as the project. Before activating the
project's shell, we completely remove all host environment variables to
simulate the project's environment. It can be called with this command:
'./project shell'. A simple prompt has also been added to highlight that
the user is using the Maneage shell!
|
|
Until now, Maneage would only build Flock before building everything else
using Make (calling 'basic.mk') in parallel. Flock was necessary to avoid
parallel downloads during the building of software (which could cause
network problems). But after recently trying Maneage on FreeBSD (which is
not yet complete, see bug #58465), we noticed that the BSD implemenation of
Make couldn't parse 'basic.mk' (in particular, complaining with the 'ifeq'
parts) and its shell also had some peculiarities.
It was thus decided to also install our own minimalist shell, Make and
compressor program before calling 'basic.mk'. In this way, 'basic.mk' can
now assume the same GNU Make features that high-level.mk and python.mk
assume. The pre-make building of software is now organized in
'reproduce/software/shell/pre-make-build.sh'.
Another nice feature of this commit is for macOS users: until now the
default macOS Make had problems for parallel building of software, so
'basic.mk' was built in one thread. But now that we can build the core
tools with GNU Make on macOS too, it uses all threads. Furthermore, since
we now run 'basic.mk' with GNU Make, we can use '.ONESHELL' and don't have
to finish every line of a long rule with a backslash to keep variables and
such.
Generally, the pre-make software are now organized like this: first we
build Lzip before anything else: it is downloaded as a simple '.tar' file
that is not compressed (only ~400kb). Once Lzip is built, the pre-make
phase continues with building GNU Make, Dash (a minimalist shell) and
Flock. All of their tarballs are in '.tar.lz'. Maneage then enters
'basic.mk' and the first program it builds is GNU Gzip (itself packaged as
'.tar.lz'). Once Gzip is built, we build all the other compression software
(all downloaded as '.tar.gz'). Afterwards, any compression standard for
other software is fine because we have it.
In the process, a bug related to using backup servers was found in
'reproduce/analysis/bash/download-multi-try' for calling outside of
'basic.mk' and removed Bash-specific features. As a result of that bug-fix,
because we now have multiple servers for software tarballs, the backup
servers now have their own configuration file in
'reproduce/software/config/servers-backup.conf'. This makes it much easier
to maintain the backup server list across the multiple places that we need
it.
Some other minor fixes:
- In building Bzip2, we need to specify 'CC' so it doesn't use 'gcc'.
- In building Zip, the 'generic_gcc' Make option caused a crash on FreeBSD
(which doesn't have GCC).
- We are now using 'uname -s' to specify if we are on a Linux kernel or
not, if not, we are still using the old 'on_mac_os' variable.
- While I was trying to build on FreeBSD, I noticed some further
corrections that could help. For example the 'makelink' Make-function
now takes a third argument which can be a different name compared to the
actual program (used for examle to make a link to '/usr/bin/cc' from
'gcc'.
- Until now we didn't know if the host's Make implementation supports
placing a '@' at the start of the recipe (to avoid printing the actual
commands to standard output). Especially in the tarball download phase,
there are many lines that are printed for each download which was really
annoying. We already used '@' in 'high-level.mk' and 'python.mk' before,
but now that we also know that 'basic.mk' is called with our custom GNU
Make, we can use it at the start for a cleaner stdout.
- Until now, WCSLIB assumed a Fortran compiler, but when the user is on a
system where we can't install GCC (or has activated the '--host-cc'
option), it may not be present and the project shouldn't break because
of this. So with this commit, when a Fortran compiler isn't present,
WCSLIB will be built with the '--disable-fortran' configuration option.
This commit (task #15667) was completed with help/checks by Raul
Infante-Sainz and Boud Roukema.
|
|
With this commit, Maneage now includes instructions to build the memory
tracing tool Valgrind and the program 'patch' (to apply corrections/patches
in text files and in particular the sources of programs).
For this version of Valgrind, some patches were necessary for an interface
with OpenMPI 2.x (which is the case now). Also note that this version of
Valgrind's checks can fail with GCC 10.1.x (when using '--host-cc'), and
the failures aren't due to internal problems but due to how the tests are
designed (https://bugs.gentoo.org/707598). So currently if any of
Valgrind's checks fail, Maneage still assumes that Valgrind was built and
installed successfully.
While testing on macOS, we noticed that it needs the macOS-specific 'mig'
program which we can't build in Maneage. DESCRIPTION: The mig command
invokes the Mach Interface Generator to generate Remote Procedure Call
(RPC) code for client-server style Mach IPC from specification files. So a
symbolic link to the system's 'mig' is now added to the project's programs
on macOS systems.
This commit's build of Patch and Valgrind has been tested on two GNU/Linux
distributions (Debian and ArchLinux) as well as macOS.
Work on this commit started by Boud Roukema, but also involved tests and
corrections by Mohammad Akhlaghi and Raul Infante-Sainz.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Until now Maneage used the host's GNU Gettext if it was present. Gettext is
a relatively low-level software that enables programs to print messages in
different languages based on the host environment. Even though it has not
direct effect on the running of the software for Maneage and the lanugage
environment in Maneage is pre-determined, it is necessary to have it
because if the basic programs see it in the host they will link with it and
will have problems if/when the host's Gettext is updated.
With this commit (which is actually a squashed rebase of 9 commits by Raul
and Mohammad), Gettext and its two extra dependencies (libxml2 and
libunistring) are now installed within Maneage as a basic software and
built before GNU Bash. As a result, all programs built afterwards will
successfully link with our own internal version of Gettext and
libraries. To get this working, some of the basic software dependencies had
to updated and re-ordered and it has been tested in both GNU/Linux and
macoS.
Some other minor issues that are fixed with this commit
- Until this commit, when TeX was not installed, the warning message
saying how to run the configure step in order to re-configure the
project was not showing the option `-e'. However, the use of this option
is more convenient than entering the top-build directory and etc every
time. So with this commit, the warning message has been changed in order
use the option `-e' in the re-configure of the project.
- Until now, on macOS systems, Bash was not linking with our internally
built `libncurses'. With this commit, this has been fixed by setting
`--withcurses=yes' for Bash's configure script.
|
|
Until this commit, the configure step would fail with an error when
compiling libgit2 on a test system. The origin of this bug, on the OS that
was tested, appears to be that in OpenSSL Version 1.1.1a, openssl/ec.h
fails to include openssl/openconf.h. The bug is described in more detail at
https://savannah.nongnu.org/bugs/index.php?58263
With this commit, this is fixed by manually inserting a necessary
components. In particular, `sed` is used to insert a preprocessor
instruction into `openssl/openconf.h`, defining `DEPRECATED_1_2_0(f)`, for
an arbitrary section of code `f`, to include that code rather than exclude
it or warn about it.
This commit is valid provided that openssl remains at a version earlier
than 1.2.0. Starting at version 1.2.0, deprecation warnings should be run
normally. We have thus moved the version of OpenSSL in `versions.conf' to
the section for programs that need to be manually checked for version
updates with a note to remind the user when reaching that version.
Other packages that use OpenSSL may benefit from this commit, not just
libgit2.
|
|
Until now, the sed script for determining URL download rules in the three
software building Makefiles (`basic.mk', `high-level.mk' and `python.mk')
considered package names such as `fftw-3...` and `fftw2-2.1...` to be
identical. As the example above shows, this would make it hard to include
some software that may hav conflicting non-number names.
With this commit, the SED script that is used to separate the version from
the tarball name only matches numbers that are after a dash
(`-'). Therefore considers `fftw-3...` and `fftw-2...` to be identical, but
`fftw-3-...` and `fftw2-2.1...` to be different. As a result of this
change, the `elif' check for some of the other programs like `m4', or
`help2man' was also corrected in all three Makefiles.
While doing this check on all the software, we noticed that `zlib-version'
is being repeated two times in `version.conf' so it was removed. It caused
no complications, because both were the same number, but could lead to bugs
later.
|
|
Until now, throughout Maneage we were using the old name of "Reproducible
Paper Template". But we have finally decided to use Maneage, so to avoid
confusion, the name has been corrected in `README-hacking.md' and also in
the copyright notices.
Note also that in `README-hacking.md', the main Maneage branch is now
called `maneage', and the main Git remote has been changed to
`https://gitlab.com/maneage/project' (this is a new GitLab Group that I
have setup for all Maneage-related projects). In this repository there is
only one `maneage' branch to avoid complications with the `master' branch
of the projects using Maneage later.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
