aboutsummaryrefslogtreecommitdiff
path: root/reproduce/analysis/make/top-make.mk
AgeCommit message (Collapse)AuthorLines
2021-04-17Imported recent work in Maneage, minor conflicts fixedMohammad Akhlaghi-2/+2
Some minor conflicts (all expected from the commit messages in the Maneage branch) occurred but were easily fixed.
2021-03-28Configuration: corrected check of group nameMohammad Akhlaghi-2/+2
When built in 'group' mode, the write permissions of all created files will be activated for a certain group of users in the host operating system. The user specifies the name of the group with the '--group' option at configure time. At the very start, the './project' script checks to see if the given group name actually exists or not (to avoid hard-to-debug errors popping up later). Until now, the checking 'sg' command (that was used to build the project with group-writable permissions) would always fail due to the excessive number of redirections. Therefore, it would always print the error message and abort. With this commit, the output of 'sg' is no longer re-directed (which also helps users in debuggin). If the group does actually exist, it will just print a small statement saying so, and if it fails, the error message is printed. This fixed the problem, allowing maneage to be built in group-mode. I also noticed that the variable name keeping the group name ('reproducible_paper_group_name') used the old name for the project (which was "Reproducible paper template"! So it has been changed/corrected to 'maneage_group_name'.
2021-01-03Imported recent updates in Maneage, minor conflicts fixedMohammad Akhlaghi-1/+1
There were only three very small conflicts that have been fixed.
2021-01-02Supplement (containing appendices) optionally built separatelyMohammad Akhlaghi-1/+6
Until now, the build strategy of the paper was to have a single output PDF that either contains (1) the full paper with appendices in the same paper (2) only the main body of the paper with no appencies. But the editor in chief of CiSE recently recommended publishing the appendices as supplements that is a separate PDF (on its webpage). So with this commit, the project can make either (1) a single PDF (containing both the main body and the appendices) that will be published on arXiv and will be the default output (this is the same as before). (2) two PDFs: one that is only the main body of the paper and another that is only the appendices. Since the appendices will be printed as a PDF in any case now, the old '--no-appendix' option has been replaced by '--supplement'. Also, the internal shell/TeX variable 'noappendix' has been renamed to 'separatesupplement'.
2021-01-02Copyright year updated in all source filesMohammad Akhlaghi-1/+1
Having entered 2021, it was necessary to update the copyright years at the top of the source files. We recommend that you do this for all your project-specific source files also.
2020-12-01Imported recent work in Maneage, minor conflicts fixedMohammad Akhlaghi-2/+2
Some minor conflicts that came up during the merge were fixed.
2020-11-15Building final PDF: pdf-build-final has to be given an explicit yesMohammad Akhlaghi-2/+2
Until now, when the 'pdf-build-final' configuration variable (defined in 'reproduce/analysis/config/pdf-build.conf') was given any string a PDF would be built. This was very confusing, because people could put a 'no' and the PDF would still be built! With this commit, only when this variable has a value of 'yes' will the PDF be built. If given any other string (or no string at all), it will not produce a PDF. This issue was reported by Zahra Sharbaf.
2020-06-03Imported recent updated in Maneage, minor conflict fixedMohammad Akhlaghi-9/+12
The minor conflict was with 'reproduce/software/make/high-level.mk', and in particular because we implemented the fix to Maneage's Task #15664 in this project first. After it was moved to the main Maneage branch some minor stylistic corrections were done to it, thus causing the conflict. To resolve the conflict, I simply imported the full Maneage version of the file with this command: git checkout maneage -- reproduce/software/make/high-level.mk The other conflicts were due to the deleted files (that were resolved as described in 'README-hacking.md') and the LaTeX files that I had told '.gitattributes' to ignore from the Maneage branch.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-9/+12
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf
2020-05-01Imported recent changes in Maneage, minor conflicts fixedMohammad Akhlaghi-12/+9
A few small conflicts showed up here and there. They are fixed with this merge.
2020-04-24TypoBoud Roukema-1/+1
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-12/+9
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-04-17Imported recent work in Maneage, minor conflicts fixedMohammad Akhlaghi-1/+1
A few minor conflicts came up that were easily fixed.
2020-04-17IMPORTANT: software config directly under reproduce/software/configMohammad Akhlaghi-1/+1
Until now the software configuration parameters were defined under the `reproduce/software/config/installation/' directory. This was because the configuration parameters of analysis software (for example Gnuastro's configurations) were placed under there too. But this was terribly confusing, because the run-time options of programs falls under the "analysis" phase of the project. With this commit, the Gnuastro configuration files have been moved under the new `reproduce/analysis/config/gnuastro' directory and the software configuration files are directly under `reproduce/software/config'. A clean build was done with this change and it didn't crash, but it may cause crashes in derived projects, so after merging with Maneage, please re-configure your project to see if anything has been missed. Please let us know if there is a problem.
2020-04-02Imported recent work on Maneage, minor conflicts fixedMohammad Akhlaghi-3/+3
A few minor conflicts occurred and were fixed.
2020-03-23Analysis and configuration file sections completeMohammad Akhlaghi-2/+3
With this commit a description of these two important parts have been added to the project, along with several figures showing various parts of the files that are discussed. I also done some other restructuring of the figures and files to make things fit better into the the description of the paper.
2020-03-02Described the first analysis phase with a demo subMakefileMohammad Akhlaghi-1/+1
Until now, there was no explanation on an actual analysis phase, therefore with this commit an example scenario with a readable Makefile is included. The Data lineage graph was also simplified to both be more readable, and also to correspond to this new explanation and subMakefile. Some random edits/typos were also corrected and some references added for discussion.
2020-02-16Menke+2020 data is now imported and ready for later steps in plain textMohammad Akhlaghi-0/+1
The main problems with this dataset was the names of the journals (which sometimes have single quotes or apostrophes in them that is really annoying for SED)! But ultimately, for the simple study we want to do here, the journal names are irrelevant, so in the end I just ignored the names. Later we can set an identifier for the journals if necessary. But now we have the basic information in a way that is usable in a plot to show in this paper.
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-4/+4
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-18First set of customizations doneMohammad Akhlaghi-1/+0
The unnecessary parts were removed and the project now runs.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-0/+1
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-1/+1
Now that its 2020, its necessary to include this year in the copyright statements.
2019-10-01Infrastructure to keep preparation resultsMohammad Akhlaghi-6/+5
A special directory is now defined in `initialize.mk' that can be used in both the preparation and build phases. Also, the contents of prepared results can now be conditionally read during `./project make'.
2019-10-01Preparation phase added before final buildingMohammad Akhlaghi-0/+136
In many real-world scenarios, `./project make' can really benefit from having some basic information about the data before being run. For example when quering a server. If we know how many datasets were downloaded and their general properties, it can greatly optmize the process when we are designing the solution to be run in `./project make'. Therefore with this commit, a new phase has been added to the template's design: `./project prepare'. In the raw template this is empty, because the simple analysis done in the template doesn't warrant it. But everything is ready for projects using the template to add preparation phases prior to the analysis.
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-10 06:14:44 +0000