| Age | Commit message (Collapse) | Author | Lines |
|---|
|
In the project's 'metadata.conf', we also have an option to store the
journal DOI of the project (that will later be printed in the output file
products). So now that the paper's DOI has been set by the journal, it was
time to add it in the project too.
While looking at the usage of the metadata, I noticed that the "Publication
checklist" of 'README-hacking.md' didn't talk about it. In fact, the part
about putting metadata went into a lot of detail without even mentioning
the generic 'print-general-metadata' variable (previously called
'print-copyright') that is created in 'initialize.mk'. So I removed those
extra points and just recommended using this variable for plain-text files
and putting similar info in other formats.
Some other minor changes were made:
- The metadata now doesn't need the fixed 'https://doi.org/' prefix (to
make it consistent with the arXiv identifier). Inside 'initialize.mk',
there are now two variables called 'doi-prefix-url' and
'arxiv-prefix-url' that contain the fixed prefix.
- The 'print-copyright' name was clearly outdated for all the extra
metadata that this variable created (including the copyright). So its
name was changed to 'print-general-metadata'.
The generic Maneage changes will be taken into Maneage after this (they
were tested here).
|
|
Until now, we were primarily linking people to the Gitlab fork of this
paper. However, since this paper is part of Maneage, its main repository is
on Maneage's own server at http://git.maneage.org/paper-concept.git
With this commit therefore, all the gitlab.com URLs have been corrected to
owr own Git server.
While looking into Git-related points, I also noticed that in the demo code
listing showing how to clone Maneage and start a new project, we were using
Git's old/depreciated 'master' name. Git (and almost all common
repositories) now use 'main' as the default branch name, so this has also
been corrected here.
|
|
There were only three very small conflicts that have been fixed.
|
|
Having entered 2021, it was necessary to update the copyright years at the
top of the source files. We recommend that you do this for all your
project-specific source files also.
|
|
Some minor conflicts that came up during the merge were fixed.
|
|
There is an answer for all the referee points now. I also did some minor
edits in the paper. But we are still over the limit by around 250 words.
The only remaining point that is not yet addressed (and has '####' around
it) is the discussion on parallelization and its effect on reproducibility.
|
|
Raul's added point on the answer to the referee was very good, so I edited
it a little to be more clear (and removed his name).
Also, after looking in a few parts of the text, I fixed a few typos.
|
|
A new directory has been added at the top of the project's source called
'peer-review'. The raw reviews of the paper by the editors and referees has
been added there as '1-review.txt'. All the main points raised by the
referees have been listed in a numbered list and addressed (mostly) in
'1-answers.txt'. The text of the paper now also includes all the
implemented answers to the various points.
|
|
Until now, when the 'pdf-build-final' configuration variable (defined in
'reproduce/analysis/config/pdf-build.conf') was given any string a PDF
would be built. This was very confusing, because people could put a 'no'
and the PDF would still be built!
With this commit, only when this variable has a value of 'yes' will the PDF
be built. If given any other string (or no string at all), it will not
produce a PDF.
This issue was reported by Zahra Sharbaf.
|
|
Until now, the core Maneage branch included some configuration files for
Gnuastro's programs. This was actually a remnant of the distant past when
Maneage didn't actually build its own software and we had to rely on the
host's software versions. This file contained the configuration files
specific to Gnuastro for this project and also had a feature to avoid
checking the host's own configuration files.
However, we now build all our software ourselves with fixed configuration
files (for the version that is being installed and its version is
stored). So those extra configuration files were just extra and caused
confusion and problems in some scenarios. With this commit, those extra
files are now removed.
Also, two small issues are also addressed in parallel with this commit:
- When running './project make clean', the 'hardware-parameters.tex' macro
file (which is created by './project configure' is not deleted.
- The project title is now written into the default output's PDF's
properties (through 'hypersetup' in 'tex/src/preamble-header.tex')
through the LaTeX macro.
All these issues were found and fixed with the help of Samane Raji.
|
|
Some very minor conflicts came up and were easily corrected. They were
mostly in parts that are also shared with the demonstration in the core
Maneage branch.
|
|
Until now, the dataset's configuration names had a 'WFPC2' prefix. But this
very alien to anyone that is not familiar with the history of the Hubble
Space Telescope (the camera is no longer used! Its just used here since its
one of the standard FITS files from the FITS standard webpage).
With this commit the variable names have been modified to be more readable
and clear (having a 'DEMO-' prefix). Also the comments of 'INPUTS.conf'
(describing the purpose of each variable) were edited and made more clear.
|
|
Until now, the Zenodo identifier was manually written in the paper. But now
we have the Zenodo DOI in 'metadata.conf', so its much more robust to get
it from there (in case updated versions of the paper is published).
|
|
As described in Maneage's commit 2bd2e2f18 (which I found while testing
this project), the existing download recipe had problems when using a local
copy of the input dataset. It was first fixed here, then implemented there.
Also, to clarify things for a new user, some long comments were added at
the top of 'INPUTS.conf' to describe each of the variables, that comment
has also been put here (and is also in commit 2bd2e2f18 of Maneage).
|
|
Summary of possible semantic conflicts
1. The recipe to download input datasets has been modified. You have to
re-set the old 'origname' variable to 'localname' (to avoid confusion)
and the default dataset URL should now be complete (including the
actual filename). See the newly added descriptions in 'INPUTS.conf' for
more on this.
Until now, when the dataset was already present on the host system, a link
couldn't be made to it, causing the project to crash in the checksum
phase. This has been fixed with properly naming the main variable as
'localname' to avoid the confusion that caused it.
Some other problems have been fixed in this recipe in the meantime:
- When the checksum is different, the expected and calculated checksums
are printed.
- In the default paper, we now print the full URL of the dataset, not just
the server, so the checksum of the 'download.tex' step has been updated.
|
|
Some minor conflicts came up in 'initialize.mk' and 'verify.mk'. For the
former, I chose the version on Maneage, for the latter, I kept the 'master'
version on the checksums of this project, but kept the Maneage version for
the rest of the improvements there (like printing the verified files as
LaTeX comments in 'verify.tex'.
While testing the conflicts, I noticed a bug (in the LaTeX macro for the
number of years in the Menke+20 paper) in the previous build, thanks to the
verification step :-)! Fortunately it wasn't actually printed in the PDF,
so a normal reader won't recognize.
The bug was caused by the recently added meta-data/commented lines in the
'tools-per-year.txt' file: when calculating the number of years studied in
that paper, we were simply counting all the lines and we had forgot to
correct this after adding comments. As a result, the un-used LaTeX macro
file was saying that they have studied 47 years instead of the real 31
years! This element was actually used in the very first (+40 page!) draft
of the paper that was summarized to fit into the journal limits.
|
|
Possible semantic conflicts (that may not show up as Git conflicts but may
cause a crash in your project after the merge):
1) The project title (and other basic metadata) should be set in
'reproduce/analysis/conf/metadata.conf'. Please include this file in
your merge (if it is ignored because of '.gitattributes'!).
2) Consider importing the changes in 'initialize.mk' and 'verify.mk' (if
you have added all analysis Makefiles to the '.gitattributes' file
(thus not merging any change in them with your branch). For example
with this command:
git diff master...maneage -- reproduce/analysis/make/initialize.mk
3) The old 'verify-txt-no-comments-leading-space' function has been
replaced by 'verify-txt-no-comments-no-space'. The new function will
also remove all white-space characters between the columns (not just
white space characters at the start of the line). Thus the resulting
check won't involve spacing between columns.
A common set of steps are always necessary to prepare a project for
publication. Until now, we would simply look at previous submissions and
try to follow them, but that was prone to errors and could cause
confusion. The internal infrastructure also didn't have some useful
features to make good publication possible. Now that the submission of a
paper fully devoted to the founding criteria of Maneage is complete
(arXiv:2006.03018), it was time to formalize the necessary steps for easier
submission of a project using Maneage and implement some low-level features
that can make things easier.
With this commit a first draft of the publication checklist has been added
to 'README-hacking.md', it was tested in the submission of arXiv:2006.03018
and zenodo.3872248. To help guide users on implementing the good practices
for output datasets, the outputs of the default project shown in the paper
now use the new features). After reading the checklist, please inspect
these.
Some other relevant changes in this commit:
- The publication involves a copy of the necessary software
tarballs. Hence a new target ('dist-software') was also added to
package all the project's software tarballs in one tarball for easy
distribution.
- A new 'dist-lzip' target has been defined for those who want to
distribute an Lzip-compressed tarball.
- The '\includetikz' LaTeX macro now has a second argument to allow
configuring the '\includegraphics' call when the plot should not be
built, but just imported.
|
|
All the steps following the to-be-added (in 'README-hacking.md')
publication checklist prior to the final check from new clone have been
added:
- 'README.md' file has been set.
- "Reproducible supplement" was added just above the keywords, pointing to
Zenodo.
- A link to the to-be-uploaded data underlying the plot was added in the
caption of the tools-per-year plot.
- A new meta-data configuration file was added to store basic project
metadata to be used throughout the project. This will later be taken
into Maneage. For examle the project title is now stored here and
written into the paper's LaTeX source and output datasets automatically.
- Verification was activated and plot's data and LaTeX macro files are now
automatically verified.
- A complete metadata was added for the data underlying the plot.
- A generic function was added in 'initialize.mk' that will automatically
write project info and copyright in all plain-text outputs.
|
|
In time, some of the copyright license description had been mistakenly
shortened to two paragraphs instead of the original three that is
recommended in the GPL. With this commit, they are corrected to be exactly
in the same three paragraph format suggested by GPL.
The following files also didn't have a copyright notice, so one was added
for them:
reproduce/software/make/README.md
reproduce/software/bibtex/healpix.tex
reproduce/analysis/config/delete-me-num.conf
reproduce/analysis/config/verify-outputs.conf
|
|
Following the fact that the DSJ editor decided that this paper doesn't fit
into their scope, we decided to submit it to IEEE's Computing in Science
and Engineering (CiSE). So with this commit the text was re-written to fit
into their style and word-count limitations.
|
|
A few small conflicts showed up here and there. They are fixed with this
merge.
|
|
Until now, the comment in the file said that setting the `verify-outputs`
variable to `yes` disables the verification. Looking at
`reproduce/analysis/make/verify.mk` shows that the opposite is true.
With this commit, the word `disable` is replaced with `enable` so that the
user is not confused by the conflict between the source code in the other
file and this comment.
|
|
A few minor conflicts came up that were easily fixed.
|
|
Until now the software configuration parameters were defined under the
`reproduce/software/config/installation/' directory. This was because the
configuration parameters of analysis software (for example Gnuastro's
configurations) were placed under there too. But this was terribly
confusing, because the run-time options of programs falls under the
"analysis" phase of the project.
With this commit, the Gnuastro configuration files have been moved under
the new `reproduce/analysis/config/gnuastro' directory and the software
configuration files are directly under `reproduce/software/config'. A clean
build was done with this change and it didn't crash, but it may cause
crashes in derived projects, so after merging with Maneage, please
re-configure your project to see if anything has been missed. Please let us
know if there is a problem.
|
|
A few minor conflicts occurred and were fixed.
|
|
With this commit a description of these two important parts have been added
to the project, along with several figures showing various parts of the
files that are discussed. I also done some other restructuring of the
figures and files to make things fit better into the the description of the
paper.
|
|
Until now, there was no explanation on an actual analysis phase, therefore
with this commit an example scenario with a readable Makefile is included.
The Data lineage graph was also simplified to both be more readable, and
also to correspond to this new explanation and subMakefile.
Some random edits/typos were also corrected and some references added for
discussion.
|
|
The main problems with this dataset was the names of the journals (which
sometimes have single quotes or apostrophes in them that is really annoying
for SED)! But ultimately, for the simple study we want to do here, the
journal names are irrelevant, so in the end I just ignored the names. Later
we can set an identifier for the journals if necessary.
But now we have the basic information in a way that is usable in a plot to
show in this paper.
|
|
Until now, the configuration Makefiles (in
`reproduce/software/config/installation' and `reproduce/analysis/config')
had a `.mk' suffix, similar to the workhorse Makefiles. Although they are
indeed Makefiles, but given their nature (to only keep configuration
parameters), it is confusing (especially to early users) for them to also
have a `.mk' (similar to the analysis or software building Makefiles).
To address this issue, with this commit, all the configuration Makefiles
(in those directories) are now given a `.conf' suffix. This is also assumed
for all the files that are loaded.
The configuration (software building) and running of the template have been
checked with this change from scratch, but please report any error that may
not have been noticed.
THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS
FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE
SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES
ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
|
|
The unnecessary parts were removed and the project now runs.
|
|
Until now, the only verification that the template provided was the
published PDF. Users had to manually compare the published and generated
PDFs (numbers, plots, tables) and see if they obtained the same
result. However, this type of manual verification is not good and is prone
to frustration and missing important differences.
With this commit, a new Makefile has been added in the analysis steps:
`verify.mk'. It provides facilities to easily verify the results that go
into the paper. For example tables that go into making the paper's plots,
or the LaTeX macros that blend into the text. See the updated parts in
`README-hacking.md` for a more complete explanation.
This completes task #15497.
|
|
Now that its 2020, its necessary to include this year in the copyright
statements.
|
|
While reviewing Prasenjit's commits, I noticed that we had forgot to add
the citation for TIDES, also to make things clear, the program/library
build rules are now sorted alphabetically.
Finally, I noticed that after building the TiKZ PDF figures, it is crashing
(like on Prasenjit's computer). After looking around, I noticed its because
we were setting the of the `TEXINPUTS' environment variable to be the
installed TeX Live directory (which was ultimately redundant because by
default TeX will look into where it was installed). The important thing is
just that we remove any possible value the host system has, not to set new
directories.
|
|
TIDES is an ODE integrator with multiple-precision arithmetic.
|
|
Until now, the software building and analysis steps of the pipeline were
intertwined. However, these steps (of how to build a software, and how to
use it) are logically completely independent.
Therefore with this commit, the pipeline now has a new architecture
(particularly in the `reproduce' directory) to emphasize this distinction:
The `reproduce' directory now has the two `software' and `analysis'
subdirectories and the respective parts of the previous architecture have
been broken up between these two based on their function. There is also no
more `src' directory. The `config' directory for software and analysis is
now mixed with the language-specific directories.
Also, some of the software versions were also updated after some checks
with their webpages.
This new architecture will allow much more focused work on each part of the
pipeline (to install the software and to run them for an analysis).
|
