aboutsummaryrefslogtreecommitdiff
path: root/README.md
AgeCommit message (Collapse)AuthorLines
2020-06-28README.md now has descriptions to build a DockerfileMohammad Akhlaghi-29/+154
Docker is a very commonly used program these days for building projects in an almost independent operating system. So the instructions to build a Dockerfile for the project were added in README.md.
2020-06-07Added SoftwareHeritage link, minor typo corrections and clarificationsMohammad Akhlaghi-2/+2
The git history of the project is now archived on SoftwareHeritage and a link to it as was added in the "Reproducible supplement" tag just under the abstract. Also, some corrections were also made in the text. In particular, the part explaining the separation of software and data reproducibility was slightly clarified to be more clear
2020-06-04README.md, separated scenarios of building from tarballMohammad Akhlaghi-23/+60
The previous explanation was not too clear and simply following it was confusing. The issue was that with the tarball you have three scenarios: 1) only build the PDF using existing figures. 2) only build the PDF, but build the figures yourself, 3) build the full Maneaged project. Hopefully this distinction is now more clear from the README.md file.
2020-06-04README.md: improved points on building from tarballMohammad Akhlaghi-14/+11
Some extra explanation can help the user understand the difference between a Git-based project and a distributed tarball.
2020-06-04Verification activated, README added, Proper metadata in plot dataMohammad Akhlaghi-21/+17
All the steps following the to-be-added (in 'README-hacking.md') publication checklist prior to the final check from new clone have been added: - 'README.md' file has been set. - "Reproducible supplement" was added just above the keywords, pointing to Zenodo. - A link to the to-be-uploaded data underlying the plot was added in the caption of the tools-per-year plot. - A new meta-data configuration file was added to store basic project metadata to be used throughout the project. This will later be taken into Maneage. For examle the project title is now stored here and written into the paper's LaTeX source and output datasets automatically. - Verification was activated and plot's data and LaTeX macro files are now automatically verified. - A complete metadata was added for the data underlying the plot. - A generic function was added in 'initialize.mk' that will automatically write project info and copyright in all plain-text outputs.
2020-05-22Corrected copyright notices to fit GPL suggested formatMohammad Akhlaghi-1/+1
In time, some of the copyright license description had been mistakenly shortened to two paragraphs instead of the original three that is recommended in the GPL. With this commit, they are corrected to be exactly in the same three paragraph format suggested by GPL. The following files also didn't have a copyright notice, so one was added for them: reproduce/software/make/README.md reproduce/software/bibtex/healpix.tex reproduce/analysis/config/delete-me-num.conf reproduce/analysis/config/verify-outputs.conf
2020-04-25IMPORTANT: Primary Maneage repositories are now under maneage.orgMohammad Akhlaghi-2/+2
Until now, the primary Maneage URLs were under GitLab, but since we now have a dedicated URL and Git repository, its better to transfer to this as soon as possible. Therefore with this commit, throughout Maneage, any place that Maneage was referenced through GitLab has been corrected. Please correct your project's remote to point to the new repository at `git.maneage.org/project.git', and please make sure it follows the `maneage' branch. There is no more `master' branch on Maneage.
2020-04-20Maneage instead of Template in README-hacking.md and copyright noticesMohammad Akhlaghi-9/+6
Until now, throughout Maneage we were using the old name of "Reproducible Paper Template". But we have finally decided to use Maneage, so to avoid confusion, the name has been corrected in `README-hacking.md' and also in the copyright notices. Note also that in `README-hacking.md', the main Maneage branch is now called `maneage', and the main Git remote has been changed to `https://gitlab.com/maneage/project' (this is a new GitLab Group that I have setup for all Maneage-related projects). In this repository there is only one `maneage' branch to avoid complications with the `master' branch of the projects using Maneage later.
2020-01-23IMPORTANT: Project preparation is now also done with project makeMohammad Akhlaghi-15/+1
Until now, the main commands to run the project were these: `./project configure' (to build the software), `./project prepare' (to possibly arrange input datasets and build special configuration Makefiles) and finally `./project make' to run the project. The main logic behind the "prepare" phase `top-prepare.mk' is to build configuration files that can be fed into the "make" step and optimize its operation. For example when the total number of necessary inputs for the majority of the analysis is not as large as the total number of inputs. With "prepare" (when necessary), you go through the raw inputs, select the ones that are necessary for the rest of the project. The output of `top-prepare.mk' is a configuration file (a Make variable) that keeps the IDs (numbers, names, etc). That configuration file would then be used in the `top-make.mk' to identify the lower level targets and allow optimal project organization and management. But the last two are both part of the analysis, and while they indeed need different calls to Make to be executed, many projects don't actually need a preparation phase: ultimately, its an implementation choice by the project developers and doesn't concern the project users (or the developers when they are running it). To avoid confusing the users, or simply annoying them when a projet doesn't need it, with this commit, the top-level `top-prepare.mk' and `top-make.mk' Makefiles are called with the single `./project make' command and `./project prepare' has been dropped. I noticed this while writing the paper on this system.
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-1/+1
Now that its 2020, its necessary to include this year in the copyright statements.
2019-10-01Preparation phase added before final buildingMohammad Akhlaghi-5/+18
In many real-world scenarios, `./project make' can really benefit from having some basic information about the data before being run. For example when quering a server. If we know how many datasets were downloaded and their general properties, it can greatly optmize the process when we are designing the solution to be run in `./project make'. Therefore with this commit, a new phase has been added to the template's design: `./project prepare'. In the raw template this is empty, because the simple analysis done in the template doesn't warrant it. But everything is ready for projects using the template to add preparation phases prior to the analysis.
2019-09-28Main project script sets executable flags at configure timeMohammad Akhlaghi-3/+3
Until now, when the project's source was downloaded from something like arXiv, in `README.md', we were instructing them to set the executable flags of all the files that need it. But except for `./project', the reader shouldn't have to worry about the project internals! Once its executable, `./project' can easily fix the executable flags of all the files that need it automatically. With this commit, in `README.md', we just instruct the reader to set the executable flag of `./project' and any other file that needs an executable flag is given one at the start of the set of commands for `./project configure'. In customized projects, if an author needs executable flags on any other files, they can easily add it there without involving the user.
2019-09-27Changing to the cloned directory added to README.mdMohammad Akhlaghi-0/+1
Konrad Hinsen pointed out that this part was missing from the instructions in `README.md' after cloning. So it is added.
2019-09-26Minor edits/clarifications in README.mdMohammad Akhlaghi-13/+7
The two modifications to the LaTeX source of an arXiv-downloaded source weren't rendered properly on Gitlab, so they are corrected to be in the same line and not have a separate code-block.
2019-09-26Working project when downloaded from arXivMohammad Akhlaghi-1/+77
Until now, we were assuming that the users would just clone the project in Git. But after submitting arXiv:1909.11230, and trying to build directly from the arXiv source, I noticed several problems that wouldn't allow users to build it automatically. So I tried the build step by step and was able to find a fix for the several issues that came up. The scripting parts of the fix were primarily related to the fact that the unpacked arXiv tarball isn't under version control, so some checks had to be put there. Also, we wanted to make it easy to remove the extra files, so an extra `--clean-texdit' option was added to `./project'. Finally, some manual corrections were necessary (prior to running `./project', which are now described in `README.md'. Most of the later steps can be automated and we should do it later, I just don't have enough time now.
2019-09-18README.md written to be more generic and easy to customizeMohammad Akhlaghi-37/+38
Until now customizing it was a little more detailed, for example the copyright statement wasn't generic and was about "this template". So the user would have to correct it. With this commit, the copyright statment just says "this project", so it can apply to the raw template and also any customization of it. Also, some minor edits were made in the various parts of the text to make it more clear.
2019-08-28Minor cosmectic markdown corrections in README.mdMohammad Akhlaghi-2/+2
The Copyright year is now on a separate line (by adding a backslash), and the `file-metadata' is now enclosed in two "`" characters to show differently after rendering.
2019-07-28Single wrapper instead of old ./configure, Makefile and ./for-groupMohammad Akhlaghi-6/+6
Until now, to work on a project, it was necessary to `./configure' it and build the software. Then we had to run `.local/bin/make' to run the project and do the analysis every time. If the project was a shared project between many users on a large server, it was necessary to call the `./for-group' script. This way of managing the project had a major problem: since the user directly called the lower-level `./configure' or `.local/bin/make' it was not possible to provide high-level control (for example limiting the environment variables). This was especially noticed recently with a bug that was related to environment variables (bug #56682). With this commit, this problem is solved using a single script called `project' in the top directory. To configure and build the project, users can now run these commands: $ ./project configure $ ./project make To work on the project with other users in a group these commands can be used: $ ./project configure --group=GROUPNAME $ ./project make --group=GROUPNAME The old options to both configure and make the project are still valid. Run `./project --help' to see a list. For example: $ ./project configure -e --host-cc $ ./project make -j8 The old `configure' script has been moved to `reproduce/software/bash/configure.sh' and is called by the new `./project' script. The `./project' script now just manages the options, then passes control to the `configure.sh' script. For the "make" step, it also reads the options, then calls Make. So in the lower-level nothing has changed. Only the `./project' script is now the single/direct user interface of the project. On a parallel note: as part of bug #56682, we also found out that on some macOS systems, the `DYLD_LIBRARY_PATH' environment variable has to be set to blank. This is no problem because RPATH is automatically set in macOS and the executables and libraries contain the absolute address of the libraries they should link with. But having `DYLD_LIBRARY_PATH' can conflict with some low-level system libraries and cause very hard to debug linking errors (like that reported in the bug report). This fixes bug #56682.
2019-04-14Replaced all occurances of pipeline in textMohammad Akhlaghi-11/+11
All occurances of "pipeline" have been chanaged to "project" or "template" withint the text (comments, READMEs, and comments) of the template. The main template branch is now also named `template'. This was all because `pipeline' is too generic and couldn't be distinguished from the base, and customized project.
2019-04-14Corrected copyright information for .file-metadataMohammad Akhlaghi-1/+2
Since `.file-metadata' is a binary file, we can't include a copyright inside of it so we have to use `README.md' to mention its copyright and license notice. However, this was not done clearly and is now corrected.
2019-04-13Corrected copyright notices and info about adding copyright infoMohammad Akhlaghi-4/+2
Until now, the files where the people were meant to change didn't have a proper copyright notice (for example `Copyright (C) YOUR NAME.'). This was wrong because the license does not convey copyright ownership. So the name of the file's original author must always be included and when people modify it (and add their own copyright-able modifications). With this commit, the file's original author (and email) are added to the copyright notice and when more than one person modified a file, both names have their individual copyright notice. Based on this, the description for adding a copyright notice in `README-hacking.md' has also been modified.
2019-04-11.file-metadata also given a copyright in top READMEMohammad Akhlaghi-3/+5
Since `.file-metadata' is a binary file and we couldn't put a copyright notice within it, it has been mentioned in `README.md' to have the same copyright. Also, the copyright modification step in `README-hacking.md' was brought to a later step to be more clear that it should always be done (on new files or files that are changed).
2019-04-07Copyright notice added to all files missing oneMohammad Akhlaghi-3/+6
Until now, for short files, we only had a license notice, not an actual copyright notice. With this commit, a copyright notice has also been added. We use this new command to find these files, suggested by `ineiev@gnu.org'.
2019-03-29Added Copyright to all TeX and README filesMohammad Akhlaghi-0/+25
In order to be more clear, a copyright statement was added to all the LaTeX and README files.
2019-01-23README-pipeline.md is now called README-hacking.mdMohammad Akhlaghi-1/+1
To be more generic and recognizable, the `README-pipeline.md' script was renamed to `README-hacking.md'. In essence, it is just that: to hack the existing pipeline for your own project. We follow a similar naming convention in many GNU software.
2019-01-17README-pipeline.md referenced in README.mdMohammad Akhlaghi-1/+3
Until now, there was no reference to `README-pipeline.md' within the `README.md' file. Since `README.md' is the first file that someone reads and the basic perpose and structure of the pipeline is described in `README-pipeline.md', it was necessary to bring it up there.
2018-12-06Edited README.md to show example dependency repositoryMohammad Akhlaghi-3/+3
To help and be more clear a link to this pipeline's dependency repository has been added to `README.md'.
2018-12-05Updated README.mdMohammad Akhlaghi-15/+15
The README.md file was updated to reflect recent changes in the pipeline (especially regarding the downloader).
2018-11-22Spell check in two READMEsMohammad Akhlaghi-2/+2
A spellcheck was run on the two README files.
2018-11-22Minor edit/correction in README.mdMohammad Akhlaghi-9/+8
The note to the pipeline designers was corrected to display properly on Gitlab.
2018-11-22Placeholder in README.md for pipeline dependenciesMohammad Akhlaghi-2/+8
A placeholder link is now used in `README.md' to encourage the pipeline designers to keep a backup of all the dependencies they use.
2018-11-22Top level READMEs renamed to be similar to actual projectMohammad Akhlaghi-944/+49
Until now, were were advising the users to rename the two README files after cloning the project. This was because online Git browsers usually display the `README.md' file, so we wanted the description of the pipeline to be visible in the pipeline, and later when a project adopts it, they can have their own `README.md'. But the problem is that any change in `REAME.md' will later cause conflicts with a project's `README.md'. So we are now using the same naming convention as the papers that use the pipeline.
2018-11-22Checklist defining remote moved to topMohammad Akhlaghi-19/+26
In the checklist, we are now defining the remote host of the repository at an early stage. This is because we will need it in the `README.md' file (which now has a placeholder `XXXXXXX' instead of a valid URL).
2018-11-22Using .local instead of ./.local in READMEsMohammad Akhlaghi-6/+6
Until now, in the instructions, we were suggesting to run `./.local/bin/make', but the `./' part is extra: this is already a directory and so the shell will be able to find it. So to make things more clear and easy to read/write, we removed the `./' part from the calls to our custom Make installation.
2018-11-21Changing of README files in checklistMohammad Akhlaghi-19/+25
When you point to this project, the `README.md' file is the default file that opens on GitLab and other online git repositories. Since a reproduction pipeline project is different from the actual pipeline, its best for the default text that opens to describe the paper, not the pipeline. The old `README.md' is also kept, but its now called `REAME-pipeline.md'.
2018-11-21Pulling into pipeline branch instead of fetching in README.mdMohammad Akhlaghi-13/+15
In the previous commit, we were recommending to fetch the work from this pipeline. But since we have a separate `pipeline' branch, we can simply checkout to that branch and pull all the recent changes. So with this commit, the steps to get recent updates to the pipeline are updated.
2018-11-21Fetching pipeline updates explained in README.md checklistMohammad Akhlaghi-7/+26
Since working on the pipeline will evolve along with the projects that use it, it can be useful for projects to fetch updates in the pipeline. So the checklist in `README.md' updated to explain how to do this cleanly.
2018-11-21Updated description of Make in README.mdMohammad Akhlaghi-7/+13
Until now, because we didn't build the dependencies internally, it was important for the pipeline to be usable with any version of Make. But because of the new installation of dependencies (including GNU Make), that is no longer the case. So we can safely use GNU Make and this needs to be mentioned in `README.md'.
2018-11-20GNU Coreutils now built in basic dependenciesMohammad Akhlaghi-4/+6
GNU Coreutils are basic programs that can help in the configuration of higher-level programs. Because of that, it was a dependency of almost all software built in `dependencies.mk'. To make things more clear, easier to read and faster (when building in parallel), the building of Coreutils is now moved to the `dependencies-basic.mk' rules. There, it is built along-side Bash. Since `dependenceis-basic.mk' is run and completed before `dependencies.mk', with this, we can be sure that Coreutils is present by the time we want to build the higher-level programs. Also, Zlib is now added as a dependency of Git also (it is necessary for its build).
2018-11-19Minor corrections for easy applying of checklistMohammad Akhlaghi-26/+30
After going through the checklist for starting a new project based on the pipeline, I noticed some parts that could be modified to be more clear. They are now applied.
2018-11-19Gzip's tarball in tar.gz instead of tar.lzMohammad Akhlaghi-25/+38
Until now, we were using a customized `tar.lz' tarball for Gzip. But on systems that don't have GNU Tar, this will cause a problem (non-GNU Tar doesn't recognize `.tar.lz'). So to keep things simple, we are using the customized gzip in `tar.gz' format. After the internal build of GNU Tar and Lzip, the default method of unpacking (`tar xf XXXXX.tar.XX') will work nicely on all the standard compression algorithms and we don't have to modify our commands based on the algorithm (nice feature of GNU Tar).
2018-11-18Updated README and README.md for new dependency building featuresMohammad Akhlaghi-3/+12
The two README files have been updated to explain the new feature of downloading and building dependencies.
2018-11-14All used software with versions, acknowledgedMohammad Akhlaghi-3/+4
All the used software are now acknowledged in the template paper along with their versions. This section is also mentioned in the check list, so users don't delete it by mistake.
2018-11-13Version of programs checked on each run of pipelineMohammad Akhlaghi-9/+3
The version of all programs is now checked in `reproduce/make/src/initialize.mk' and the pipeline won't complete if any of the program versions change from those listed in `reproduce/config/pipeline/dependency-versions.mk'. Since the pipeline is systematically checking all program versions, we don't need Gnuastro's `--onlyversion' option any more. So it (and all references to it) have been removed.
2018-11-12Dependencies built at the start of the pipelineMohammad Akhlaghi-157/+161
To enable easy/proper reproduction of results, all the high-level dependencies are now built within the pipeline and installed in a fixed directory that is added to the PATH of the Makefile. This includes GNU Bash and GNU Make, which are then used to run the pipeline. The `./configure' script will first build Bash and Make within itself, then it will build All the dependencies are also built to be static. So after they are built, changing of the system's low-level libraries (like C library) won't change the tarballs. Currently the C library and C compiler aren't built within the pipeline, but we'll hopefully add them to the build process also. With this change, we now have full control of the shell and Make that will be used in the pipeline, so we can safely remove some of the generalities we had before.
2018-08-24Minor editsMohammad Akhlaghi-10/+13
After a full trial of the checklist, some further minor edits were made to make it more clear.
2018-08-24Minor corrections in README.mdMohammad Akhlaghi-7/+7
Some minor changes were made to be more clear.
2018-08-24Minor edits in README.mdMohammad Akhlaghi-11/+18
A few minor points were corrected in README.md.
2018-08-24Step to check pipeline added in README.md checklistMohammad Akhlaghi-4/+21
A step was added close to the top of the checklist to remind people to check the pipeline before making any changes. Also, the `--origin' option was removed from the `git clone' command into a separate command to rename the origin branch. This helps in readability.
2018-08-24Checklist modified to keep pipeline historyMohammad Akhlaghi-34/+55
Until now, in the check list of `README.md', we were recommending to delete the history of the pipeline and start your own history from that. But this disables users of the pipeline to keep it up to date with new features that are added to it. With this commit, the main branch is now called `pipeline' (to allow users to use `master' for their own research) and in the clone command, the pipeline's remote is now called `pipeline-origin' (to allow the user to use `origin' for their own remote).