| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Going through the text, some further minor edits were made.
|
|
Some minor edits to the newly added parts of `README.md'.
|
|
A section was added to `README.md' for describing possible future steps
that we can take to make this pipeline even more robust. In it, I added a
first interesting thing that I think would be really exciting to add, but I
don't have time to do now.
|
|
The link to the slides describing the context was the old address (which
still works, but is just a symbolic link to the new address). It was thus
corrected to point to the proper filename.
|
|
The main online repository name has been changed to `reproducible-paper'
from `reproduction-pipeline-template'. So the cloning command in
`README.md' had to be corrected.
|
|
Some minor corrections were made regarding the output repository.
|
|
The markup for the link to the final PDF in the `README.md' file was
mistakenly written and is now corrected.
|
|
A template was made to keep the output of this pipeline as a demonstration
and it is now added to the description in `README.md'.
|
|
While doing my own project (which has grown to a processing time of about
half an hour), I felt that it would be very convenient to a record of the
outputs at major points also. But we don't want to bloat the pipeline by
commiting PDF files or large datasets that get fully changed and are just
by-products. So it occurred to me to have a separate pipeline only for
outputs and after trying it out, it indeed seemds to be a good solution.
|
|
Some futher edits were made to the paragraph describing the contents of
`README.md' for a smoother reading.
|
|
After the last commit, another minor correction is implemeneted to further
simplify the reading.
|
|
I reviewed the first few sections of `README.md' and made some small
corrections to make it easier to understand/read.
|
|
A small edit was made at the start of `README.md' to make it easier to
read.
|
|
The computer modern font that was designed by Donald Knuth and is the
default of LaTeX is indeed a very good, elegant and nice font in
print. However, most journals choose the roman fonts and thus the computer
modern font doesn't (subjectively) fit into the journal format nicely. So
the default font of this pipeline's paper now uses LaTeX's `newtx' package
for a roman style font.
Also, a set of preamble settings were added to allow headers in the pages
of the paper to make the result resemble more like a journal paper
(familiar to the eye), while also adding important information. A new
header was made for this job. This new header now also contains the title
and author settings (after all, these are also a type of header).
Finally, the LaTeX `authblk' package was used to organize authors and their
affiliations.
|
|
A few minor corrections were made in `README.md'.
|
|
Making plots and including references are integral parts of a scientific
paper. Therefore to demonstrate how cleanly they can be used within the
pipeline, they are now used to produce the final PDF.
To use PGFPlots a random dataset is made (using AWK's random function) and
is plotted using PGFPlots. The minimum and maximum values of the dataset
are also included in the text to further show how such calculations can go
into the macros and text.
For the references, the NoiseChisel paper was added as a reference to cite
when using this pipeline along with the MUSE UDF paper I, which uses this
pipeline for two sections. Following this discussion, citation is also
discussed in `README.md` and the NoiseChisel paper is also added as a
published work with a reproduction pipeline.
|
|
Until now, the copyright statement was left empty for the users of the
pipeline to fill. However, the files have already been created and have an
author (or contributing authors) before the user starts using the
pipeline. So the original authors of the files are added along with the
year. The user can add their own name to the existing files under the
"Contributing author" when they start and they will be the "Original
author" of the new files they create.
Several changes were also made to the TeX management:
- LaTeX is run within a `reproduce/build/tex/build' directory now. Not in
the top reproduction pipeline directory. This helps keep all the
auxiliary TeX files and directories in that directory and keep the top
reproduction pipeline directory clean. After the final PDF is built, a
copy is put in the top reproduction pipeline directory for easy viewing.
- The PGFPlots preamble was also made more useful, allowing the name of
the `.tex' file to also be the name of the final plot that is
produced. This is a GREAT feature, because without it, the TiKZ
externalization would be based on order of the plots within the
paper. But now, order is irrelevant and we can even delete the TiKZ
files within the processing workhorse-Makefiles so the plots are
definitly rebuilt on the next run.
- The paper is now in a two-column format to be more similar to published
papers.
A tip on debugging Make was added to `README.md'.
|
|
A typo (" ... followed b checklist ...") was found and corrected in
`README.md'. Also, after re-reading the paragraph, it was made slightly
more clear with some minor edits in the text.
|
|
I had made some slides for a talk here at Lyon Observatory a little over a
week ago and I thought it may be useful to add them in the `README.md' file
to help demonstrate the general concept before having to read such long
texts.
Later, we should be adding some figures to this `README.md' file to make it
more easier to understand.
|
|
The points were made more clear.
|
|
The published works using the pipeline now have a separate section for them
selves in the introduction and some of the explanation was made more clear.
|
|
`README.md' didn't contain a general description of the pipeline's design
architecture. So a few paragraphs have been added to help someone new to it
to understand it better.
|
|
The mandatory and optional (for example downloader) dependencies are now
checked at configure time so users can know what they may be missing before
the processing starts. Since its recommended to be run in parallel, it can
be hard to find what you are missing after running the pipeline. As part of
these checks, the program to use for downloading is now also set at
configure time, it is only used as a pre-defined (in `LOCAL.mk') variable
during Make's processing.
A small title was also added to discus the pipeline architecture that will
be filled in the next commit.
|
|
A few other minor corrections were applied to the text to be more clear.
|
|
Some minor edits and a spellcheck were made in the text to make it easier
to understand/read.
|
|
In the "Tips" section of `README.md', a section on version control was
added and a first tip regarding tags was added to guide (new) users on how
to effectively define and use tags. As a result, in the checklist, adding a
`v0' tag is now also suggested.
Some minor typos were also fixed.
|
|
As described in the commens above `MINMAPSIZE' of `LOCAL.mk.in', the amount
of memory to map to HDD/SSD or keep in RAM is a local issue and not
relevant to the pipeline's results. So it is now defined in a
`gnuastro-local.conf' file.
To keep the Makefiles clean, this file is created by the `./configure'
script. To do this cleanly, the `./configure' script was also almost fully
re-written with better functionality now.
|
|
The choice of whether or not to make a PDF is now also a local system
issue, not a general pipeline issue. So it has been put in the new
`LOCAL.mk.in' file which replaces the old `DIRECTORIES.mk.in'. All local
settings (things that when changed should not be version-controlled) should
be defined in this file.
A sanity check was added to find if `./configure' has been run before
`make' or not (using the `LOCAL.mk' file which is an output of the
configuration step). If `LOCAL.mk' doesn't exist, an error will be printed
informing the user that `./configure' needs to be run first.
The configure script also provides more clear and hopefully better
information on its purpose and what must be done.
Since `make clean', it is executed even when `./configure' hasn't been run,
it will only delete the build directory and its contents when local
configuration has been done.
A `distclean' target was also added which will first "clean" the pipeline,
then delete the `LOCAL.mk.in' file.
To allow rules like `make' to be run even if `BDIR' isn't defined
(`./configure' hasn't been run yet), a fake `BDIR' is defined in such
cases.
|
|
While going over parts of the text, some minor typos were found and
corrected.
|
|
The title "Tips on using the pipeline" was a little generic and could be
confused with people who want to reproduce the result, not the designers of
the pipeline. So it was changed to "Tips on expanding this template
(designing your pipeline)". Some minor edits were also made to its first
paragraph.
|
|
Some minor typos were found and corrected. In other cases, the text was
slightly edited to be more clear.
|
|
`README.md' is for this pipeline, not the research project that is using
it. Therefore it might be confused with the `README' that is devoted to the
research project. So in the checklist, a point was added to delete this
file before making the first new commit.
|
|
The basic title, short description and author section of the checklist was
moved immediately after copyright because it is more related to it. The
description of Gnuastro is now before `README' because the user will
confront Gnuastro in `README' and this will provide a good introduction on
what to do with it.
|
|
The creation of a new Git repo is now moved to the end of the checklist. It
was not in place as the third step before. Now, the user makes all the
standard changes and just before they start going into the details of their
research, they define their new repository.
|
|
The description of adding a title and authors was made slightly more clear.
|
|
The first commit didn't have an explanation on correcting the title of the
project in the final PDF or the top-level Makefile, so a pointer was added
to the list. Also, some extra dependencies were removed from `README' and
its paragraphs were scaled to the new width of 75 characters that is
defined in `.dir-locals.el' (for Emacs settings, taken from Gnuastro).
|
|
Let's start working on this pipeline independently with this first
commit. It is based on my previous experiences, but I had never made a
skeleton of a pipeline before, it was always within a working analysis.
But now that the pipeline has a separate repository for its self, we will
be able to work on it and use it as a base for future work and modify it to
make it even better. Hopefully in time (and with the help of others), it
will grow and become much more robust and useful.
|
