| Age | Commit message (Collapse) | Author | Lines |
|---|
|
I forgot to put these in the last commit! They are now implemented.
|
|
I had another look at the text and tried to summarize it a little more
while also fixing several typos that I had just discovered! In the process,
I noticed that we hadn't actually put a link to Maneage's main Git
repository! So we now have the URL as a `git clone' command.
Also, I thought that its better to show the `TARGETS.conf' file (which we
actually talk about) in the file architecture instead of `LOCAL.conf.in'
(which we don't talk about any more!).
Finally, to be more similar with DSJ, the bibliography is now in normal
font size, not footnotesize.
|
|
In the introduction I had mistakenly put "metadata" instead of "workflow",
its corrected with this commit.
|
|
Ryan O'Connor is from RDA and my principle contact for the grant. He also
kindly went over the first draft of the paper and gave useful and
encouraging comments.
|
|
I had also done this in the main branch, but I noticed this commit later!
|
|
This was only relevant for the submitted version, so I am committing it
until the next submission.
|
|
After the submission and reading through the text another time I found some
typo corrections and fixed them. Also now that David is an author, I
removed him from the people to acknowledge (David brought this up himself,
thanks David ;-)).
|
|
Since David is a co-author of the paper, I have removed him from the
Acknowledgments paragraph.
|
|
Since the journal doesn't accept supplementary files during initial
submission, I have put this link on the PDF for the referee and editors to
access if they want.
Also the `tex/img' file was added to the distribution tarball.
|
|
I was using some special Bash feature before to ignore the distribution
directory itself when copying the files, but that had some problems, so I
just used a simple for loop over a `find' command to ignore it. Also, for
now, we don't need BibLaTeX sources in the project (that is primarily for
arXiv), so to help the referee see a more cleaner contents of this
supplement file.
|
|
Thanks David ;-)! I tried to implement as many as I could. For the time
being, I just removed teh `~' between "Section" and its number, and removed
the italics on software names. Let's see what the journal editors say about
it. Otherwise, most of the suggestions were very good and indeed made the
text much better to read.
|
|
David submitted these comments by email, I (Mohammad) am committing it into
the project.
|
|
To make the text easier to read and further comply with the author
guideline, the text was shrank a little more and the two final sections
were also added on "Competing interest" and "Author contributions".
I also found the CODATA logo on Wikipedia in SVG format (vector graphics),
so I replaced the previous pixelated PNG format with the PDF (converted
from SVG).
|
|
I removed the part emphasizing one journal, but about the comment at the
end of the conclusion (to say some negative things): we have already done
that in the discussion, mentioning the caveats ;-). But you are right, we
should summarize the caveats is well.
|
|
With this commit, minor typos have been fixed from Section 4 to 6. The
majority of them are minor corrections (typos/spelling). I added just a
couple of comments/suggestions in red. If you think they are necessary
try to fit with the latest modifications. If not, just ignore them.
Really nice paper, congratulations to all contributors!!
|
|
With this commit, just minor typos have been fixed (I am rushing over
the text since we are out of time!). There are also a suggestion in
order to remove a couple of phrases to try to be more aseptic when
comparing with another project. But there is only an idea, take it or
not as you consider.
|
|
A first draft for these was added and will probably become much better in
the next few iterations.
|
|
I went through the whole paper and tried to decrease its size even futher,
also a first draft of the summarized discussion has been added.
|
|
TeXLive recently transitioned from its 2019 version to its 2020 version
thanks to Elham Saremi's trial of the this project. The fact that
traditionally Maneage installs all TeXLive packages in a per-year directory
is very annoying and required an update in the core Maneage system every
year. So I suddently recognized that we can fix this by setting a different
name for the directory holding the release year. This has been implemented
with this commit.
I have also done this change in the main Maneage branch for other projects
to also benefit from this correction.
|
|
Thanks Roberto, they are now implemented.
|
|
I corrected bugs, typos, double words, and punctuations along the whole
text. I do some comments which are always highlighted with \hl{this is my
comment}, so you can identify them easily in the pdf. If you want to
remove, then you can do it easily with Ctrl+R since I think you never used
\hl. Finally, I added my name as coauthor but, please, feel free to remove
it if you want.
Note from Mohammad: since there were two other suggested commits before
this that were already merged, I rembased Roberto's commits and fixed a few
minor conflicts.
|
|
There weren't any conflicts in this merge.
|
|
With this commit, a short line telling that Maneage has tutorials
showing the workflow in a practical way has been added. Because of we
are near to the limit of words, I have added just a very short line. The
sentence does not specify any file name since the tutorial(s) is not
included (it will be in a near future).
|
|
With this commit, I have included a small line to recognize Julia
Aguilar-Cabello as the designer of the Maneage's logo.
|
|
|
|
The contents until two commits ago when I started to summarize the paper
are now in a new and shorter format: previously the discussion started on
page 25, but now it starts on page 17. It is still a little longer than
8000 words, but not as significantly as before. I will add the discussion
and also try to summarize it futher before submission.
|
|
As described in the previous commit, we had to shorten the paper to roughly
8000 words (which is significant decrease!). With this commit, I am
committing the current version of the summarized paper, where the
introduction, defintions and principles have now been summarized. I am now
summarizing the rest (describing Maneage and the discussion).
|
|
We just recently recognied that the final paper should not be longer than
8000 words. The easiest way was just to start a new `paper.tex' and bring
in parts from the original/long version. We can use all the hard work that
went into writing the long paper later (possibly in a manual for
Maneage). So I don't want to suddenly distroy its history at this point.
To let Git know about renaming the original `paper.tex' to
`tex/src/paper-long.tex', I am making this commit. This commit doesn't have
any `paper.tex' and only records the fact that it has been renamed. In the
next commit, I'll re-create `paper.tex' which will host the short/final
version. But thanks to this commit, if we later make any changes to long
version, Git will know that it was originally the main `paper.tex'.
|
|
Thank you very much guys :-).
|
|
I tried to get all the words I knew. Some may be correct in different
conventions. It definitely needs a second or third review for spell
checking.
Suggested some additional formatting, including but not limited to
using the LaTeX \textsuperscript{} command for stating dates.
Also, some unfamiliar rare words that finished with `-able` or
`-ability` may need to be changed. Finding better alternatives to
better simplify and ease the `readabiliy` ;-) of the paper - I see
it's hard not to use them actually. It has got me wondering what
better alternatives are available? We'll find out.
|
|
to shorten some sentences, fix some spelling/typos, and further
simplify some parts.
I can see that there are some spelling errors in the rest of the paper.
They will be taken care of in the next commit.
|
|
There was only a small conflict in the abstract with Zahra's corrections
and that has been fixed.
|
|
A parenthesis was added to the abstract to hightlight the importance of
data lineage for reproducibility. Also, the definitions that Zahra had
given for reproducibility were added as comments above the part on defining
reproducibility. We'll later decide how to blend them in, if possible.
|
|
With this commit, I have corrected several minor typos in Section 2
(Definitions). I have also put a couple of notes for modify or ignore
some phrases.
|
|
With this commit, minor typos have been corrected in the Introduction
section. The majority of them are just small corrections, others are in
order to not use contractions ("did not" instead of "didn't" and so on).
Other modifications have been added with the aim of remove some small
portion of the phrases to make it more focused.
|
|
With this commit, I have tried to make the Abstract a bit shorter. I
think it was too long considering that there are plenty of space in the
paper to describe some of the points that were noticed in the abstract.
The main point is just to try to be atractive to the reader being
focused to the main points. In any case I think there are room for
improving it. The keywords have also been sorted alphabetically.
|
|
With this commit, I have added my name as co-author of the paper. Since
my affiliation is the same as Mohammad's affiliations, I did not have to
add any additional line for that.
|
|
Because one of the most important properties of Manaege is
reproducibility. I think is it better to say something about it in the
abstract, like the thing that you do in your speech.
With this commit, I noted something about it in the abstract.
|
|
Raul noticed this during the build: I had mistakenly put an extra `&&' at
the start of the line where the line before ended with a `;'.
|
|
Until now, Astropy was instructed to build its own internal copy of the
Expat library. However, with the recent commits before, Maneage now
includes an installation of Expat and Astropy can't keep the two (its
internal version and the project's version) separate, so they conflict and
don't let Astropy get built.
When trying to build Manage (the actual project, not this paper) after
applying the commits before there, Raul discovered this problem.
With this commit, the problem is fixed by setting the Expat library as an
explicit dependency of Astropy and asking Astropy to ignore its internal
copy.
While doing this, I recognized that it is much easier and elegant to add
steps in various stages of the `pybuild' function through hooks instead of
variables. So the fifth argument of the `pybuild' function was removed and
now it actually checks if hooks are defined as functions and if so, they
will be called.
The `pyhook_after' function was also implemented in the installation of
`pybind11' (which needed it, given that the 5th argument of `pybuild' was
removed) and after doing a test-build, I noticed that two lines were not
ending with a `\' in `boost' (a dependency of `pybind11').
|
|
Until now we would simply return the version numbers as they were written
into the separate files and situations can happen where the version numbers
contain an underscore (`_'). However, this character is a methematical
character in LaTeX, causing LaTeX to complain and abort.
With this commit, a step has been added at the end of the configure script
to convert any possible `_' to `\_'. Once it is commented (a backslash is
put behind it), the underscore will be printed as it is in the final PDF.
|
|
Until now, the M4 that was built on macOS had internal problems (as
discussed in #1): it would simply print `Abort trap: 6' in the output and
abort. After looking at the build of Homebrew, I noticed that they apply a
patch (correct one line) to fix this problem. To be able to apply that
patch on macOS systems, I had fully open up the build recipe of M4 and
atleast on the testing system, it was built successfully.
Also, after successfully building M4, and thus Autoconf and thus Minizip,
we were able to build XLSX I/O on a macOS and found out that the internal
library's full address wasn't being put in the libraries and
executables. With this commit, we now use macOS's `install_name_tool' to
correct the positions of the two `libxlsxio_*' libraries in all its
executables.
|
|
Minizip is a dependency of XLSX I/O and until now, I was just using the
most recent version I found (2.9.2), but XLSX I/O is written for the
Minizip 1.x series, not 2.x. Somehow it didn't cause a crash on my
computer!!! I think XLSX I/O's CMake is instructed to look into system
directories by default when it doesn't find the directories in the given
places. And because I had installed Minizip on my operating system, it
did't complain.
Upon trying the build on their systems, Yahya, Raul and Zahra reported a
failure in the build of XLSX I/O which was due the to the problem above (we
were installing the wrong version of Minizip!).
With this commit, this has been fixed by installing the 1.x series of
Minizip (whish is actually installed within zlib!).
|
|
A few minor conflicts occurred and were fixed.
|
|
I hadn't updated the abstract since first writing it. With this commit, it
has been updated to be more precise and generically interesting, focusing
more on the principles and usability. I also greatly improved the section
on publishing the workflow.
|
|
There weren't any conflicts in this merge.
|
|
The subdirectories here (and the fact that they may be symbolic links) may
be confusing for some early project users, so a `README.md' file was added
there describing them and when they are links, when directories and when
some may not yet exist.
|
|
Until this commit, the year of this paper was 2019 and the linking url
was the temporal one. However, the final official publication year is
2020. With this commit, the year and the url have been changed to the
final ones.
|
|
With this commit, multiples tabs in the definition of MissFITS tarball
have been removed. Now they are white spaces.
|
|
This section (of sharing a build directory between multiple members of the
project) is also a good features of Maneage.
|
