| Age | Commit message (Collapse) | Author | Lines |
|---|
|
The steps to package the project have been made slightly more clear and
also the temporary directory that is created for packaging is deleted after
the tarball is made.
|
|
Until now, when you ran `make clean', all the directories under
`$(BDIR)/tex/' would be deleted except for `macros' and `build'. This was
good for the single-user mode. But in group mode, this would delete the
user-specific TeX build directory because its called `build-USER', not
`build'.
With this commit, to fix the problem, we define the new `texbtopdir' and
based on the group condition, and use that to specify which directory to
not delete.
|
|
Carlos Morales Socorro reported that his LaTeX build was missing the
`trimspaces' package, so it is now included in the pipeline.
|
|
Until now, some software were using the depreciated ADS URL
(`http://adsabs.harvard.edu....') and some were using the modern one
(`http://ui.adsabs.harvard.edu').
With this commit, to be consistent they all link to the modern URL.
|
|
Until now, this script would always only work with a file-lock. But in some
scenarios, we might want to download in parallel. For example when the
system has multiple ports to the internet.
With this commit, we have added this feature: when the lockfile name is
`nolock', it won't lock and will download in parallel.
|
|
Since ImageMagick can take long to build, we are now building it in
parallel. Also, the part where we replace an `_' with `\_' in the software
version at the end of the configure script was removed. It is more
clear/readable that the actual rule that includes such a name deals with
the underline (as is the case for `sip_tpv' which already dealt with it).
Finally, I noticed that the checks at the start of `top-prepare' were
missing new-lines. I had forgot that the Make single-shell variable isn't
activated in this stage yet.
|
|
A special directory is now defined in `initialize.mk' that can be used in
both the preparation and build phases. Also, the contents of prepared
results can now be conditionally read during `./project make'.
|
|
In many real-world scenarios, `./project make' can really benefit from
having some basic information about the data before being run. For example
when quering a server. If we know how many datasets were downloaded and
their general properties, it can greatly optmize the process when we are
designing the solution to be run in `./project make'.
Therefore with this commit, a new phase has been added to the template's
design: `./project prepare'. In the raw template this is empty, because the
simple analysis done in the template doesn't warrant it. But everything is
ready for projects using the template to add preparation phases prior to
the analysis.
|
|
It was some time since these three software were not updated! With this
commit the template now uses the most recent stable release of these
packages.
Also, the hosting server for ImageMagick was moved to my own webpage
because unfortunately ImageMagick removes its tarballs from its own
version.
|
|
Until now, when the project's source was downloaded from something like
arXiv, in `README.md', we were instructing them to set the executable flags
of all the files that need it. But except for `./project', the reader
shouldn't have to worry about the project internals! Once its executable,
`./project' can easily fix the executable flags of all the files that need
it automatically.
With this commit, in `README.md', we just instruct the reader to set the
executable flag of `./project' and any other file that needs an executable
flag is given one at the start of the set of commands for `./project
configure'. In customized projects, if an author needs executable flags on
any other files, they can easily add it there without involving the user.
|
|
Until now we were calling it `Sextractor', but the official way of writing
it is `SExtractor'. With this commit, this has been corrected.
|
|
Konrad Hinsen pointed out that this part was missing from the instructions
in `README.md' after cloning. So it is added.
|
|
The two modifications to the LaTeX source of an arXiv-downloaded source
weren't rendered properly on Gitlab, so they are corrected to be in the
same line and not have a separate code-block.
|
|
Until now, we were assuming that the users would just clone the project in
Git. But after submitting arXiv:1909.11230, and trying to build directly
from the arXiv source, I noticed several problems that wouldn't allow users
to build it automatically. So I tried the build step by step and was able
to find a fix for the several issues that came up.
The scripting parts of the fix were primarily related to the fact that the
unpacked arXiv tarball isn't under version control, so some checks had to
be put there. Also, we wanted to make it easy to remove the extra files, so
an extra `--clean-texdit' option was added to `./project'.
Finally, some manual corrections were necessary (prior to running
`./project', which are now described in `README.md'. Most of the later
steps can be automated and we should do it later, I just don't have enough
time now.
|
|
The description of arXiv:1909.11230 was slightly modified to be in the same
format as the other papers.
|
|
This paper was published on arXiv today and is a good example for people to
see the application of this system in practice.
|
|
Until now, the pipeline was instructed to only ignore the current temporary
project distribution directory. So if there were directories from previous
builds, they were wrongly included in the current tarball.
With this commit, we don't just ignore the directory of the current
distribution, but generally, all directories starting with `paper-v*'.
|
|
Until now customizing it was a little more detailed, for example the
copyright statement wasn't generic and was about "this template". So the
user would have to correct it.
With this commit, the copyright statment just says "this project", so it
can apply to the raw template and also any customization of it. Also, some
minor edits were made in the various parts of the text to make it more
clear.
|
|
Users that are not familiar with the file structure of the project may
specify the current directory (to-level source directory) as their
build-directory. This will cause a crash right after answering the
questions, where `rm' will complain about `tex/build' not being deleted
because it exists as a directory.
To avoid such confusing situtations, the configure script now checks if the
build directory is actually a sub-directory of the source. If it is, it
will complain with a short message and abort. Also, a `CAUTION' statment
has been put in the initial description, right ontop of the question.
This bug was reported Carlos Allende Prieto and David Valls-Gabaud.
|
|
Until now, when the commit was tagged, `git describe' would just print the
tag and no longer the commit checksum. This is bad because the checksum is
a much more robust way to confirm the point in history.
With this commit the `--long' option has been added to `git describe' to
fix this issue. From now on, when we are on a tag, it will print the tag
followed by a `-0-' and the first characters of the checksum.
|
|
`./project make dist' will package all the LaTeX-specific files (and
analysis source files) into one `tar.gz' file that is ready to upload to
servers like arXiv. However, it wasn't updated for some time, so running it
would complain about not having a `configure' script in the top of the
project.
With this commit, it now works with the new file-structure of the project
and also copies all the BibLaTeX source files and `paper.bbl' into the top
tarball directory, which allows arXiv to build the paper as intended.
The output of `./project make dist' has been uploaded and tested on arXiv
and it is built by arXiv perfectly.
Also, a short description of all the special `make' targets was added to
the output of `./project --help'.
|
|
After a re-read on Gitlab, it has been slightly edited to be more clear.
|
|
When you want to publish your project, it is very convenient to have a
single file that contains the whole history. So a tip is added to
`README-hacking.md' that describes how to do this with `git bundle'.
|
|
Until now, we weren't explicitly asking for BibLaTeX to build the citations
with only initial of the author's given names. Therefore when one BibTeX
entry had a full given name and another had only initials, this would also
be reflected in the paper's bibliography.
With this commit, the `giveninits=true' option is given to BibLaTeX to
always only print the initial character of an author's given name.
|
|
Until now the SExtractor BibTeX entry has the first-name and family name in
the same field, while the family-name should be in curly braces. Also, it
was missing an ADS URL. So the default ADS generated BibTeX entry for
SExtractor is now used instead of the old one.
|
|
In some cases, users of the template may not need the other template
headers, they may only want `preamble-biblatex.tex'. But `xcolor' needs to
be loaded before being able to load the various colors we use in the
references. So to be self-consistent, it is loaded.
Also, the default style was also printing the month of the publication
which is not common. So a line was added to clear the `month' field before
building the Bibliography.
|
|
New versions of astropy, bash, cmake, curl, findutils, gawk, gcc,
ghostscript, git, make, gsl had recently come so they are updated with this
commit.
About GNU Findutils and GNU Make: I was bootstrapping (building the tarball
of) these two separately separately because their standard tarball release
had problems on some systems. Both have been updated now so I am no longer
using my own webpage as their main URL.
A special note about GNU Make. I just noticed that during bootstrapping,
GNU Make would use the fixed version string of `4.2.90' for any commit!!!
But fortunately they have officially released their 4.2.90 version, so we
are safely using their own webpage. The only difference is the compression
format. My old bootstrapped build was `tar.lz', but the standard release is
`tar.gz'.
Also, all the basic programs (installed in `.local/bin') in `basic.mk' are
now existance-only dependencies (after a `|'). Because later programs just
use them at a very basic level, so there is no need to rebuild everything
when Bash gets updated for example.
|
|
The Copyright year is now on a separate line (by adding a backslash), and
the `file-metadata' is now enclosed in two "`" characters to show
differently after rendering.
|
|
Until now, OpenMPI would complain about not having `ssh' or `rsh' as a
remote shell feature. However, such features should not be necessary in a
reproducible scenario and they also have major security issues.
With this commit, we are now using OpenMPI's `OMPI_MCA_plm_rsh_agent'
environment variable to disable any remote shell dependency for it (as
suggested by Boud). Therefore, any dependency for OpenSSH has been
removed. But I thought to keep the build instructions incase it may be
useful under some un-foreseen scenario. However, to discourage people from
building it, a notice was added ontop of the build instructions.
This bug was found, tested and solved thanks to Roberto Baena Gallé and
Boud Roukema.
This fixes bug #56724.
|
|
Until now we have followed the convention of using space characters before
comment lines in recepies, not tabs. This has been corrected in one case.
|
|
Until this commit, `fpack' and `funpack' were not installed by default
with the installation of CFITSIO. It is necessary to explicity do a
`make fpack' and `make funpack' to have them installed. With this
commit, these two programs have been added.
|
|
Until this commit, the name of the variable for `beautifulsoup4'
checksum was wrong, and because of that, it was not able to install it.
With this commit, `beautifulsoup-checksum' has been replaced for
`beautifulsoup4-checksum' in the `reproduce/software/make/python.mk'
Makefile, and the problem has been fixed. This was not noticed
previously because this Python package is only installed when some high
level programs are requested to be installed.
With this commit the version of `imagemagick' program has been also
updated because the previous version is not available in the official
website anymore.
|
|
There were no conflicts in this merge.
|
|
When trying to install `libgit2' on my macOS system, it complains about
not finding `_iconv*' functions! But apparently `libgit2' has its own
implementation of `libiconv' that it uses if it can't find `libiconv' on
macOS. So, the solution to this problem was to add `-DUSE_ICONV=OFF' to
the configuration options of `libgit2'.
I reported this issue that now is fixed thanks to the help of Mohammad
Akhlaghi.
|
|
Until now, the paper's title and author information were set it
`tex/src/preamble-header.tex'. But they are actually shown in the final PDF
paper and a much better place to keep them is the top-level `paper.tex'.
With this commit, the setting of the title and author names has been moved
to `paper.tex', just after importing all the preambles. However, the basic
package importation and low-level settings are still set in
`tex/src/preamble-header.tex', because they are relatively low-level.
This task was suggested by Deepak (Indian Institute of Astrophysics).
|
|
Recently the version of Gnuastro in the template was updated to version
0.10. However, I had forgot to update the `gnuastro.conf' file to fit with
the necessary new features of this version. The new general Gnuastro
configuration file is now added instead.
This bug was reported by Deepak.
|
|
Until now, when describing the sections to remove for customizing a
project, I had mistakenly repeated the `%% Start of main body.'
statement.
With this commit, the second one is changed to `%% End of main body.'
This issue was reported by Deepak.
|
|
After the checklist was applied in the 5th Indo-French Astronomy School, we
found some cases in the checklist that were extra (and thus had to be
removed), or were needed (and thus were added).
Also the non-necessary steps for a first commit were moved to a
separate/new section in the checklist for the people to add after doing
their first commit.
Also, the software part of the paper was moved to an appendix.
|
|
Until now, we weren't explicitly telling libtiff to ignore JBIG-KIT. So on
some systems, it would try to link withit and would thus fail.
With this commit, we have disabled JBIG-KIT support for libtiff. I tried to
import it into the template, but it doesn't have use the standard GNU Build
system. Maybe later we can add a set of build rules for it, I don't have
time now.
Also, this problem with libtiff occurred while building Ghostscript. But
was fixed after adding this option to libtiff. So libtiff was added as a
dependency of Ghostscript.
This bug was reported by Sheeraz Ahmad.
|
|
Until now we weren't setting OpenSSH's `privsep-path' configure option. As
a result, it would try to use its default (`/var/empty'). Therefore, when
the host doesn't have `/var/empty', OpenSSH would crash because of not
having permissions to create this directory.
With this commit, we are now using OpenSSH's `--with-privsep-path'
configure-time option to explicitly use a directory with the project's
build directory.
This bug was found by Sheeraz Ahmad and Amina Aahil.
|
|
This was a bug in WCSLIB 6.3 that has been fixed in WCSLIB 6.4. From
WCSLIB's changelog: "The rule change to the Fortran makefile in v6.3 to add
getwcstab_f.o to the sharable library causes it to depend on CFITSIO to
resolve fits_get_wcstab(). Hence backed out of that change.".
The actual error was like this:
Undefined symbols for architecture x86_64:
"_fits_read_wcstab", referenced from:
_ftwcst_ in getwcstab_f.o
"_gFitsFiles", referenced from:
_ftwcst_ in getwcstab_f.o
ld: symbol(s) not found for architecture x86_64
|
|
These three libraries are dependencies of Biber, so we will need them
later, but since we don't build biber from source now, we can't control
what library it links with. With this commit, we have just added their
versions, checksum, download URL and build rule incase they are useful in
other software.
Later, when we build Biber (and Texlive in general) from source, we'll be
able to use these.
|
|
In the line where we checked if libffi is installed in `lib/' or `lib64/',
there was a typo that lead to an incorrect result: we had forgot to add a
`-f' to the second check. This is corrected with this commit.
|
|
Until now, unlike most other programs, in Gnuastro we would run `make
check', but this causes a crash on some systems, because of its
BuildProgram test: a linking error because the library isn't installed
yet. Which is natural in cases like this (and must be corrected in future
Gnuastro releases).
With this commit, the checks of Gnuastro have been removed.
|
|
Until now, when building PatchELF, we would always require that it be done
statically. However, some systems don't have a static C library available
for linking. This cause a crash in the static building of PatchELF. But a
static PatchELF is necessary for correcting RPATH in GCC's outputs.
With this commit, in the configure script we check if a static C library is
linkable for the compiler. If it isn't then `host_cc' will be set to 1 and
GCC won't be built. We also pass the result of this test to `basic.mk'
(through `good_static_lib'), so if a static C library isn't available, it
builds a dynamically linked PatchELF.
This bug was reported by Elham Saremi.
|
|
Until now, the Fortran compiler check wouldn't delete the files it creates
in the temporary software building directory.
With this commit, the cleaning steps have been added.
|
|
Until now, OpenMPI was being installed without any dependency. This was
fine because it would indeed build. But the moment you tried loading
something that depends on it (for example `mpi4py' through `astropy'), you
would get an error complaining that SSH isn't present.
With this commit, the pipeline now also installs OpenSSH to solve this
problem.
|
|
Until now, we were relying on WCSLIB's internal checking and linking with
CFITSIO. But on one macOS system (not others that had no problem!), we
noticed that it complains with undefined symbol linking errors to CFITSIO
libraries.
With this commit, as a fast/ugly solution, we are explicity adding
`-lcfitsio' to WCSLIB's `LIBS' variable so all binaries are linked with it
automatically. We'll be in touch with the WCSLIB author to see if a better
solution can be found.
|
|
Until now, we weren't explicitly disabling Java in the build of libffi
because there was no Java platform on the systems we tested. But recently
Yahya Sefidbakht report a crash in libffi (reported in bug #56716) because
of Java not being compiled properly.
Unfortunately libffi doesn't have a configure option to disable Java, but
it does have an internal macro (`NO_JAVA_RAW_API'). With this commit, we
we defined this macro in the `make' step, and it solved the problem.
This fixes bug #56716.
|
|
Some of the software tarballs are directly available on their webpage (for
example due to build problems on systems, where we had to clone the
software and build its tarball ourselves until the next release). Until
now, only for these software, these tarballs were hosted on
`http://akhlaghi.org/src'. But now, I have moved a clone of the software
backup repository (including all its software) to
`http://akhlaghi.org/reproduce-software'.
To be more clear and have a single place for the backup software, the URL
of those software has also been updated in the project source.
|
