aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorLines
2020-01-22Adding Raul as contributor of README-hacking.mdRaul Infante-Sainz-1/+2
Since I (Raul) did some changes (and I hope to do more :-)) in the `README-hacking.md', I am adding my information at the beginning of this file.
2020-01-22Adding basic configuration of Git in README-hacking.mdRaul Infante-Sainz-1/+14
Until this commit, we were asuming that Git was already properly configured. However, in order to be as complete as possible, it would be good if the basic commands to configure Git were in the `README-hacking.md'. With this commit, a small paragraph has been added in order to have the basic Git configuration commands (i.e. to configure the name, email, and favorite text editor).
2020-01-20IMPORTANT!!! Configuration Makefiles now have a .conf suffixMohammad Akhlaghi-87/+85
Until now, the configuration Makefiles (in `reproduce/software/config/installation' and `reproduce/analysis/config') had a `.mk' suffix, similar to the workhorse Makefiles. Although they are indeed Makefiles, but given their nature (to only keep configuration parameters), it is confusing (especially to early users) for them to also have a `.mk' (similar to the analysis or software building Makefiles). To address this issue, with this commit, all the configuration Makefiles (in those directories) are now given a `.conf' suffix. This is also assumed for all the files that are loaded. The configuration (software building) and running of the template have been checked with this change from scratch, but please report any error that may not have been noticed. THIS IS AN IMPORTANT CHANGE AND WILL CAUSE CRASHES OR UNEXPECTED BEHAVIORS FOR PROJECTS THAT HAVE BRANCHED FROM THIS TEMPLATE. PLEASE CORRECT THE SUFFIX OF ALL YOUR PROJECT'S CONFIGURATION MAKEFILES (IN THE DIRECTORIES ABOVE), OTHERWISE THEY AREN'T AUTOMATICALLY LOADED ANYMORE.
2020-01-19GNU Make updated to version 4.3Mohammad Akhlaghi-3/+3
GNU Make 4.3 was just announced, so I have updated it here is well. This was important because until now the installable version was in alpha-mode (4.2.90), now its a stable version.
2020-01-19New --check-config option to ./project to check software build statusMohammad Akhlaghi-31/+56
Until now, it was necessry to run a long `while true' loop to see what is currently being built at configure time. So with this commit, a new `--checkconfig' option has been added to `./project' that can be called to run that loop and make it easier to check.
2020-01-19Corrected typo in last commit (forgetting \ at end of line)Mohammad Akhlaghi-1/+1
In the previous commmit, I had forgot to add a `\' after the newly added `sys_library_path' variable to the `high-level.mk' call.
2020-01-19LIBRARY_PATH is set accordingly based on the hostMohammad Akhlaghi-20/+58
Until now, GCC wouldn't build properly on Debian-based operating systems because `ld' needed to link with several necessary C library features like `crti.o' and `crtn.o' (this is an `ld' issue, not GCC). The solution is to add the directory containing them to `LIBRARY_PATH'. In the previous commit, I actually searched for these files, but while testing on another system, I noticed that it can be problematic (other architectures may exist). With this commit, we are actually finding the build architecture of the running GCC (which is the same as the `ld') and using that to fix a fixed directory to `LIBRARY_PATH'.
2020-01-19Better search for static C library at start of configurationMohammad Akhlaghi-108/+75
Until now, to see if a working static C library and `sys/cdefs.h' exist, we were checking absolute locations like `/usr/include/sys/cdefs.h' or `/usr/lib/libc.a' and `/usr/lib64/libc.a'. But this is not robust because on different systems, they can be in different locations. With this commit, we actually use `find' to find the location of `libc.a' and use that to add elements to CPPFLAGS and LDFLAGS. This should fix the problem on systems that have them on non-standard locations.
2020-01-18TeXLive version printing updated to include revisionMohammad Akhlaghi-7/+26
Until now, when find the versions of the TeXLive packages, we would assume that `cat-date' is always present (because some packages don't have a version!). However, apparently an update has been made in the TeXLive Manager (`tlmgr') and `cat-date' is no longer present! As a result, none of the TeXLive packages were being printed. With this commit, it now assumes that `revision' is always present for every package, but it also attempts to read `cat-date' (for backwards compatability). When `cat-version' isn't present, it will try printing `revision' and if that is also not present, it will print the date.
2020-01-18Added mweights as a TeXLive packageMohammad Akhlaghi-1/+2
After a new rebuild of the project, I noticed that we now need to also build the `mweights' package.
2020-01-18README-hacking.md: edits and corrections for easier customizationMohammad Akhlaghi-10/+12
The checklist descriptions were slightly edited to be more clear. Also, while following them, I noticed that while removing the "delete-me" parts on `verify.mk', would cause an error: the `if [ $$m == delete-me ];' statement we were saying to delete cause an error because `elif' was the first statement Bash would see. So with this commit, the `download' conditional (which isn't instructed to be deleted) was set to be the top (with an `if') and the `delete-me' conditional now has an `elif'.
2020-01-17README-hacking.md: script to list installed programs before configureMohammad Akhlaghi-10/+18
Until now, the small one-line script that lists programs was introduced in the checklist after running `./project configure'. But people would mostly miss it because they would wait until the configuration is complete. With this commit, that point has been put above the `./project configure' step. Readers are instructed to open a new terminal and run that script, then go to the next step so they see the directories get filled actively. It will also help them understand what is going on.
2020-01-13Minor corrections in referencing Infante-Sainz+2019Mohammad Akhlaghi-6/+5
Until now the actual journal webpage was used for Raul's paper. However, the journal webpage needs authorized access for people to read it, therefore its will be inaccessible for many people. A better and more well known place for the paper (atleast in astronomy) is the ADS link. In the ADS link, if someone has access to the journal, they will get the journal's version and if not, they will get the arXiv version. It also has a common BibTeX export tool for all journals. We had also done this for the other papers in that list. With this commit, I thus changed the URL for the paper, and also removed the "issue" number (4 in this case), since that is mostly irrelevant, only the volume and page numbers are usually used for the other papers too.
2020-01-13Added Infante-Sainz et al. 2019 as most recent paper using this templateRaul Infante-Sainz-3/+4
The "SDSS extended PSFs" paper was already included as an example of papers wich uses this template. However, the reference was the arXiv one. With this commit, since the paper has been finally published, it has been added the final reference to the journal.
2020-01-13Adding X11 libraries path to LDFLAGS in Ghostscript installationRaul Infante-Sainz-1/+4
Until this commit, the checking of X11 installation done to ensure that it is already available in the host system was crashing in macOS systems. The reason is that the place of the X11 libraries use to be `/opt/X11/lib' in macOS systems. With this commit, this issue has been fixed by adding this directory to the LDFLAGS.
2020-01-13Updated verion of Astropy to 4.0 the most recent oneRaul Infante-Sainz-3/+3
Newer versions of Astropy package has been released. With this commit, it has been updated. It has been increased from v3.2.1 to v4.0
2020-01-11Corrected markdown code notations in one README.mdMohammad Akhlaghi-4/+4
In markdown, to specify that part of the text should be shown as code we need to put it between two `. But in `reproduce/software/make/README.md', the code parts started with ` and finished in ' (like the file name above). With this commit, this has been corrected and it will display properly on web browsers.
2020-01-01Verification function checks if file existsMohammad Akhlaghi-8/+20
Until now, if the file to be verified didn't exist, a different checksum would be generated, and it would stop, but it wasn't immediately clear if the differing checksum is because the file doesn't exist at all! With this commit, before calculating the checksum, we first make sure if the file exists. If it doesn't exist an explicit error is printed and thus will help the project editor to find the cause of the problem.
2020-01-01Minor corrections in `README-hacking.md' after verificationMohammad Akhlaghi-4/+7
In the previous commit, I had forgot to update a small part in the checklist (when modifying `top-make.mk') which is now corrected. I also added a few sentences in the description of how to customize the verification to make it easier to understand.
2020-01-01Verification of output values and data added within templateMohammad Akhlaghi-32/+198
Until now, the only verification that the template provided was the published PDF. Users had to manually compare the published and generated PDFs (numbers, plots, tables) and see if they obtained the same result. However, this type of manual verification is not good and is prone to frustration and missing important differences. With this commit, a new Makefile has been added in the analysis steps: `verify.mk'. It provides facilities to easily verify the results that go into the paper. For example tables that go into making the paper's plots, or the LaTeX macros that blend into the text. See the updated parts in `README-hacking.md` for a more complete explanation. This completes task #15497.
2020-01-01README-hacking.md checklist now also ignores changes in paper.texMohammad Akhlaghi-7/+12
In the previous commit, we added the files to ignore from the template branch, but only the files that had been deleted. With this commit, `paper.tex' is also added to the files that must be ignored from the template branch (the file remains in the project, but in the template branch, its contents are just dummy place-holders).
2020-01-01Added step README-hacking's checklist to avoid merging dummy filesMohammad Akhlaghi-0/+15
During the checklist we guide the user to delete the dummy `delete-me*' files from their custom branch. Later, if the dummy files are updated in the template's master branch, if the user merges with the template branch, these files will be written back into their project! This is very annoying! With this commit, a step was added in the `README-hacking.md' checklist, just after deleting the dummy files to avoid this problem using the `.gitattributes' file, telling Git to keep the changes as implemented in the merging branch (`ours').
2020-01-01Copyright statements updated to include 2020Mohammad Akhlaghi-70/+70
Now that its 2020, its necessary to include this year in the copyright statements.
2019-12-18Fixing Libxml2 checksum variable nameRaul Infante-Sainz-1/+1
Until this commit, the number `2' was missing in the checksum variable name of that library. It was `libxml-checksum' but it should be `libxml2-checksum'. With this commit, this issue has been fixed.
2019-12-18Removed extra backslash in Jeepney prerequisitesRaul Infante-Sainz-1/+1
An extra backslash in the prerequisites of Jeepney Python package was causing a crash in the installation of that software. With this commit, this problem has been fixed by removing the backslash.
2019-12-14R explicitly built without support for OpenMPMohammad Akhlaghi-1/+2
OpenMP takes a LONG TIME to build, so to keep things reproducible we are explicitly disabling OpenMP, if a user needs OpenMP, its trivial to just add it as a prerequisite of R. The problem is that in some scenarios (based on other dependencies and when they were built in the build directory), OpenMP may be present when R is being installed and in other it may not. We don't want the result to be different between the two builds.
2019-12-14Core R package is now in templateMohammad Akhlaghi-0/+16
With this commit, we now have the core R interpretter within the template. We should later include instructions to install R packages (possibly in a separate top-level Makefile like Python).
2019-12-13Necessary TeXLive packages installed: pdfescape letltxmacro bitsetMohammad Akhlaghi-1/+1
Recent builds of the template need these three packages to build the PDF. This was reported by Hamed Altafi.
2019-12-04Added pdftexmcds to the TeXlive packages to installMohammad Akhlaghi-1/+1
Until now we weren't including this package, but Alberto Madrigal recently reported that his build of the template failed because it needed it. With this commit, it is now being installed with the template.
2019-12-04Perl built without -shared on macOSMohammad Akhlaghi-1/+11
Until now, while building Perl, the `-Dlddlflags="-shared $$LDFLAGS"' option was being used for all systems. However, this caused `symbol(s) not found for architecture x86_64' problems on macOS systems. With this commit, this configure option is only passed for GNU/Linux systems. With it, Perl can be built nicely on both GNU/Linux and macOS.
2019-12-04Updated verions of Ghostscript and GnuastroMohammad Akhlaghi-4/+4
Newer versions of these packages have recently come out with major improvements, so they have been updated in the template.
2019-12-04Checking for necessary X11 libraries before building GhostscriptMohammad Akhlaghi-1/+35
Until now, Ghostscript was using some host system's X11 libraries during its build (and later at run-time). We should ideally install all these necessary libraries within the template (Task #15481). But right now we are too busy. As a temporary work-around we try building a small dummy program that links with some of those libraries before attempting to built Ghostscript. If it fails, then a notice is printed with the cause and explaining a temporary solution is suggested: how to install those libraries on the system when you have root access.
2019-11-29Download links directly to actual file if it exists in INDIRMohammad Akhlaghi-2/+8
Until now, when an input dataset already exists in `INDIR', the template would just make a symbolic link to it in the build directory. However, in many cases, the files in INDIR will actually be links to other locations on the filesystem and some programs have problems following too many links. With this commit, the template is now using the `readlink' program (part of GNU Coreutils) to follow a possible link and point the link in the build directory directly to an actual non-link file.
2019-11-24Project's Makefiles run with no builtin rules or variablesMohammad Akhlaghi-1/+2
Until now, after removing all environment variables, we were just giving Make the top Makefile to execute. By default, for every target, Make will try many built-in rules (which is good when compiling programs, but redundant in other cases). All these checkings also populate the debugging output of Make (with `-d'). So its easier and slightly faster to just tell Make to ignore builtin rules and variables. With this commit, to address this issue, the `project' script runs `.local/bin/make' with `--no-builtin-rules' and `--no-builtin-variables'.
2019-11-08Matplotlib problem on macOS system with GNU GCC fixedMohammad Akhlaghi-3/+9
Until now when building Matplotlib on macOS systems, we were using the default C compiler. However, while Yahya Sefidbakht (previously) and Mahdieh Nabavi (now) were trying to build the template, on their macOS using the GNU Compiler Collection (GCC), we found that Matplotlib needs special macOS headers that GCC doesn't recognize. With this commit, when Matplotlib is being built on macOS systems, it uses `clang' and this fixed the problem (so far checked on Mahdieh's machine).
2019-11-08Minor corrections applied in software buildsMohammad Akhlaghi-8/+13
While working on a different branch to build the GNU C Library, I noticed a few places in the template that need corrections which are now applied: 1. A new-line character after the "C compiler works" notice at the start of the configure script. 2. Removing possible `::' in the `LD_LIBRARY_PATH' definition of `basic.mk'. Note that its not necessary in the other steps because we don't use any outside-defined `LD_LIBRARY_PATH'. 3. Building GMP for C++ and also with `--enable-fat'. 4. Removing the unpacked Perl tarball directory after its installation.
2019-11-06GNU Project Debugger (GDB) and Pexpect can now be builtMohammad Akhlaghi-0/+18
These two packages are necessary to build the GNU C Library.
2019-11-06Perl is now built as a basic dependency of the templateMohammad Akhlaghi-5/+52
Perl is necessary to build Texinfo and later to build LaTeX. Until now we were just using the host operating system's installation of Perl, but in some instances that Perl can be too old and not suppor the features necessary. With this commit, Perl is now built from source during the basic installation step of the template. This was reported by Idafen Santana PĂ©rez, after trying the pipeline on an Amazon AWS EC2 system (a Linux distro by Amazon for its cloud services).
2019-11-06Added 1911.01430 as most recent paper using this templateMohammad Akhlaghi-0/+7
Raul's paper (that uses this template) was just published on arXiv today (congratulations Raul!). So it has been added to the list of papers using this template.
2019-11-04Acknowledged support from the RDA EU 4.0 grantMohammad Akhlaghi-1/+4
Since we got the RDA Adoption grant, it was necessary to add it in the acknowledgements.
2019-11-03Corrected build of log4cxx by re-building the tarball usedMohammad Akhlaghi-15/+31
When building the log4cxx tarball from its Git history, I noticed that files with very long names are not packaged by tar (because by default Automake uses the ancient v7 tar format that only supports file names less than 99 characters). So I build the tarball with the `tar-ustar' option to Automake (by modifying the log4cxx source) and the resulting tarball was able to compile and run successfully. This has been described above the rule to build log4cxx and I also sent an email to their developing mailing list to inform them of this problem. If they address it, I will remove the note on the necessary corrections.
2019-10-31Minor corrections in distribution and autoconf prerequisite of automakeMohammad Akhlaghi-6/+37
Some minor corrections were made in the template: - When making the distribution, `.swp' files (created by Vim) are also removed. - Autoconf is set as a prerequisite of Automake I was also trying to add the Apache log4cxx, but its default 0.10.0 tarball needs some patches, so I have just left it half done until someone actually needs it and we apply the patch.
2019-10-30Added ./project prepare in the checklist of README-hacking.mdMohammad Akhlaghi-2/+3
Since adding this new step, I had forgot to mention it in the checklist of `README-hacking.md'. It is added with this commit.
2019-10-30Tarballs set as order-only prerequisites, not needed for build callsMohammad Akhlaghi-371/+427
Until now, the tarballs were the first normal prerequisite of the software. As a result if their date changed, the whole software would be re-built. However, for tarballs specifically, we actually check their contents with a checksum, so their date is irrelevant (if its newer than the built program, but has the same checksum, there is no need to re-build the software). Also, calling the tarball name as an argument to the building process (for example `gbuild') was redundant. It is now automatically found from the list of order-only prerequisites within `gbuild' and `cbuild' (similar to how it was previously found in the `pybuild' for Python building). A `README.md' file has also been placed in `reproduce/software/make' to help describe the shared properties of the software building Makefiles. This will hopefully grow much larger in the future.
2019-10-29lmfit and its dependencies added, Python tarballs as prerequisiteMohammad Akhlaghi-189/+260
Python's `lmfit' module and all its major dependencies (`asteval', `corner', `emcee' and `uncertainties') have been included in the template. While doing this I noticed that if the tarballs are the last prerequisite of each software building rule, then when building in parallel, the template will immediately start building packages as soon as the first one is downloaded. Not like the current way that it will attempt to download several, then start building. For now, this has been implemented in the Python build rules for all the modules and we'll later do the same for the other programs and libraries. This also motivated a simplification of the `pybuild' function: it now internally looks into the prerequisites and selects the tarball from the prerequisite that is in the tarballs directory. This isn't a problem for the build, but I just don't understand why Python can't recognize the version of `emcee', Python reads the version of `emcee' as `0.0.0'! But it doesn't cause any crash in the build, so for now its fine.
2019-10-29Minor edits to README-hacking.mdMohammad Akhlaghi-28/+31
The part on using shared memory was edited for a few things that weren't clear.
2019-10-29Further small edit in using shared memory of README-hacking.mdMohammad Akhlaghi-3/+2
Some typos were fixed.
2019-10-29Minor edits to suggestion on using shared memoryMohammad Akhlaghi-3/+9
The edits help it be more clear, and remind the reader to delete any remaining file in the RAM in the end.
2019-10-29Suggestion on good usage of /dev/shm in README-hacking.mdMohammad Akhlaghi-6/+57
When you are working with large files and there is some good RAM in the system (large/powerful computers), it is beneficial to work in the shared memory directory and not the actual persistent storage (like HDD or SSD). With this commit, a fully working demo has been added to `README-hacking.md' (under the tips of "Make programming") to show how to effectively work in situations like this.
2019-10-28HEALPix, Autoconf and Automake now in libraryMohammad Akhlaghi-1/+99
The tarball of HEALPix includes multiple languages and doesn't include the ready-to-run GNU Build System by default, we actually have to build the `./configure' script for the C/C++ libraries. So it was necessary to also include GNU Autoconf and GNU Automake as prerequisites of HEALPix. However, the official GNU Autoconf tarball (dating from 2012) doesn't build on modern systems, so I just cloned it from its source and bootstrapped it and built its modern tarball which we are using here.