| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Until this commit, we were installing `netpbm' without disabling the X
Windows System in GNU/Linux. That is the default option in the configure
step of `netpbm'. However, we are not installing the necessary libraries
(X11) and headers for that. As a consecuence, when testing in a system
where we don't have these libraries/headers (Ubuntu 14.04), it crashes.
With this commit, we disable the X Windows System option in `netpbm' by
giving the answer `none' to one of the last answers to that question in
the configure step.
|
|
Until this commit, we were installing `cairo' without disabling the X
Windows System. That is the default option in the configure step of
`cairo'. However, we are not installing the necessaries libraries (X11)
and headers for that. As a consecuence, when testing in a system where
we don't have these libraries/headers (Ubuntu 14.04), it crashes.
With this commit, we disable the X Windows System option in `cairo'
configure step by setting the option `--with-x=no'.
|
|
In the last imported work about fixing all backslashes, the extension of
`netpbm' tarball was not the correct one. Now we are using `.tar.gz'
instead of `.tgz'.
With this commit, we fix this typo by replacing the `.tgz' by `.tar.gz'
in the rule of `netpbm'.
|
|
Until this commit, `m4' was not a prerequisite of `gmp'. However, during
a test in Ubuntu 14.04 using one single core in the configure step, it
crashed complaining about not having `m4' installed.
With this commit, we set `m4' as a prerequisite of `gmp'.
|
|
In some rules there were some spaces when we should use TAB, and
also the other way around. We were using TAB instead using spaces.
With this commit, we fix that spaces/TAB in the necessary rules.
|
|
Until now, we were missing `numpy' and `six' as prerequisites of `h5py'.
Because we did the configure step with all cores, `numpy' and `six'
allways were built before `h5py' with any crash. However, in a single
thread configure run we noticed that we were missing these two
dependencies.
With this commit, we fix this issue by setting `numpy' and `six' as
prerequisites of `h5py'.
|
|
With this commit, the copyright information of some files have been
modify in order to include the work of Raul Infante-Sainz.
|
|
Until this commit, the prerequisites of `sip_tpv' were `mpmath' and
`sympy'. However, the real prerequisites of `sip_tpv' are `astropy',
`numpy' and `sympy'.
With this commit, we fix this issue, and now `mpmath' is only a
prerequisite of `sympy'.
|
|
Until this commit, we had a problem in the installation of
Astrometry-net in Mac OS systems. During the runing of the Makefile, it
stopped at the reporting stage because it tried to do a couple of steps
that in Mac OS are not possible:
$ cat /proc/cpuinfo
$ free
The reason is that `/proc/cpuinfo' and `free' doesn't exist in Mac OS.
With this commit, we override these two steps. Since they are only for
reporting, they are not mandatory. So, we avoid doing them by using
`sed' before running the Makefile.
|
|
Until this commit, we were using `libpng' version 1.4.22 (out dated).
The reason is that with `libpng` versions > 1.5, there was some
problems with `netpbm'. But we have update `netpbm' version and now
there is no conflict betweem them.
With this commit, we increase the version of `libpng' to have the most
recent one.
|
|
Until now, we installed `netpbm' by setting the default paths to
libraries and headers. That worked fine for GNU/Linux systems, however,
in Mac OS systems we have to explicity say to `netpbm' questions what
are the paths to the libraries and headers. We found this problem
because we tried to run `solve-field' to obtain the astrometry of some
images, and then it goes to use `pnmfile', a program that failed because
it was not properly linked with `libnetpmb'.
With this commit, we fix this problem by answering properly the
questions in the configure step of `netpbm' and setting explicity where
we want to place the libraries and headers. With this commit, we also
update `netpbm' version. To do that, we have to download the last
version, for which it doesn't exist a tarball. So, we built this tarball
and put it in the Mohammad's webpage.
|
|
Until this commit, in Mac OS we were installing `binutils' as symbolic
links of various programs (`as', `ar', `ld', `nm',` ps' and `ranlib').
However, there was a missing semicolon at the end of each line. As a
consecuence, the installation of `binutils' on Mac OS systems failed.
With this commit, we fix this problem by typing a semicolon at the end
of each makelink line.
|
|
Until this commit, FFTW was installed by default, without the single
precission option. However, when installing `sextractor' in a new system
we found an error in the installation complaining about not having
single precission files of FFTW. More explicity the error was: "FFTW
single precision library files not found in [...]".
With this commit, we fix this problem by passing the option
`--enable-single' in the installation of FFTW.
|
|
Until now, we were not citing the paper of `sip_tpv' package.
With this commit, we have been fix this issue.
|
|
With this commit, we let the Python package `sip_tpv' to be optional in
order to not install it by default. It is a very specific package and I
forgot to remove it from `TARGETS.mk' in the previous commit.
|
|
With this commit, we add `sip_tpv' Python package into the template.
This is a small package to convert SIP distorsion coefficients into PV
distorsion coefficients, and the other way around.
This package is useful in a astronomical context, specially when `swarp'
is going to be used in order to resample images. The reason is that
`swarp' only can understand PV distorsion coefficients.
|
|
With this commit, we add `sympy' Python package into the template. This
is a package to do symbolic mathematics.
The motivation is that it is a prerequisite of `sip_tpv' Python package,
which is useful to convert SIP distorsion coefficients into PV
coefficients (in the context of astronomical images). However, the
availability of `sympy' in the template will be useful for anyone
interested in this package.
|
|
With this commit, we add `mpmath' Python package into the template. This
package is a prerequisite of `sympy', a package to do symbolic
mathematics.
The motivation of adding this package is because it is a dependency of
`sympy', which is more widely used into the Python science community.
|
|
Until now, `metastore' did not depend on the necessaries programs that
we use to install it (`awk', `coreutils' and `sed'). They are not
official dependencies of `metastore', but we need them to install it.
With this commit, we put these programs as prerequisites of `metastore'
in order to be able to install it without any problem.
|
|
In two places, I had mistakenly put a <'> instead of a <`>, causing bad
highlighting in the markdown rendering. They have been corrected.
Also, one long line in was broken up into several.
|
|
Until now, the software building and analysis steps of the pipeline were
intertwined. However, these steps (of how to build a software, and how to
use it) are logically completely independent.
Therefore with this commit, the pipeline now has a new architecture
(particularly in the `reproduce' directory) to emphasize this distinction:
The `reproduce' directory now has the two `software' and `analysis'
subdirectories and the respective parts of the previous architecture have
been broken up between these two based on their function. There is also no
more `src' directory. The `config' directory for software and analysis is
now mixed with the language-specific directories.
Also, some of the software versions were also updated after some checks
with their webpages.
This new architecture will allow much more focused work on each part of the
pipeline (to install the software and to run them for an analysis).
|
|
All occurances of "pipeline" have been chanaged to "project" or "template"
withint the text (comments, READMEs, and comments) of the template. The
main template branch is now also named `template'.
This was all because `pipeline' is too generic and couldn't be
distinguished from the base, and customized project.
|
|
Since `.file-metadata' is a binary file, we can't include a copyright
inside of it so we have to use `README.md' to mention its copyright and
license notice. However, this was not done clearly and is now corrected.
|
|
Until now we weren't including the citation for FFTW (one of the template's
optional packages). With this commit, it is added.
|
|
Until now, there was a single `tex/src/references.tex' file that housed the
BibTex entries for everything (software and non-software).
Since we have started to include the BibTeX entry for more software, it
will be hard to manage the large (sometime unused) BibTeX entries of the
software in the middle of the non-software related citations in the text of
the paper.
Therefore, with this commit, a `tex/dependencies' directory has been made
which has a separate BibTeX entry file for each software that needs
one. After the software is built, this file is copied to the new
`.local/version-info/cite' directory. At the end, the configure script will
concatenate all the files in this directory into one file which will later
be used with `tex/src/references.tex' by BibLaTeX.
This greatly simplifies managing of citations. Allowing us to focus on the
software-building and paper-writing citations separately/cleanly (and thus
be more efficient in both).
|
|
Until now, we did not have `file'. It was in other project, where a
problem with `Astrometry-net' software, ends up with the necessity of
having `file' into the pipeline.
With this commit, we add `file' to the project. Since it is a low level
program, it is set in `dependencies-basic.mk' as a prerequisite of GCC.
|
|
Until now, the Scipy citation was only one paper and not the correct one
(it was the online manual).
With this commit, Scipy is properly cited using the two papers. Also
some modifications in the `tex/src/references.tex' have been done
(remove last page number).
|
|
Until now, name and version of all Python packages were indicated in the
final paper, but not the main paper of them (if it exists).
With this commit, some Python packages (Cython, Matplotlib, Numpy and
Scipy) are now properly acknoledged by citating the source paper.
`mpi4py' is also cited although this package is not yet included into
the pipeline.
|
|
Since we mixed the installation of Python packages with all other
software, it may occur that some Python packages start to be installed
before having installed `unzip'. As a consecuence, they could not be
decompressed and the installation will fail. In particular, tarballs of
Numpy and Setuptools are .zip files.
With this commit, we fix this issue by setting `unzip' as a prerequisit
of Numpy and Setuptools.
|
|
Until this commit, we were using the target (version number of the
program) in the `patchelf' for `awk' and `bash'. This makes an incorrect
linking in libraries because the target is not the bin program but just
a plain text containing the version number of the program.
With this commit we fix this issue by setting in the patchelf of `awk'
and `bash' the bin executable, and not the target (version number).
|
|
Yahya Sefidbakht reported the following error when building Pkg-config on
his Mac OS system (using GCC, not Clang). It is apparently because his
version of GCC doesn't support some speical feature on Mac that is
necessary to build Glib as part of Pkg-config.
With this commit, on Mac systems, for pkg-config we are explicity asking to
build with Clang (through the `CC' flag).
|
|
In order to get a consistent final result, in its later steps, the
configure script uses our own build of the basic command-line tools (like
`cat', `awk').
Also, a correction was made to the short option parsing errors when an
unwanted argument is given, and the `-?*' was changed to `-'?'*' to avoid
un-necessary shell interpretation (for example giving unreasonable
results).
|
|
On some systems, M4 isn't available, so the linking to the host system
fails, as a result, we can't build GNU Libtool.
The main reason we weren't building M4 was a bug with the most recent GNU C
library
(http://lists.gnu.org/archive/html/bug-gnulib/2019-04/msg00004.html). But I
found a patch used by Arch Linux which fixes the issue and allows M4 to be
built. As a result, the pipeline is now building M4 also and the patched M4
tarball is now uploaded to my own webpage as backup.
While doing the steps above, I also noticed that we weren't using a tab at
the start of the link definitions of `dependencies-basic.mk'. Although its
not necessary, to be consistent, its good for the lines to always start
with a tab.
|
|
The step where we check the possibility of using `sys/cdefs.h' was still
using `$$' for shell variables (in Make), not `$' (for the shell). This was
corrected.
Also, since Astropy needs two citations, the `,' in the citation command
would conflict with Make's parsing. So we just used an `echo' command to
re-write the version info.
In Astroquery, the prerequisite list was just reordered by length to be
more clear to the eye.
|
|
Until recently we were using an actual installed executable file for the
programs. So for Gnuastro, the target was called `astnoisechisel'. But
recently, this approach was changed and the target for each software is a
simple text file with the official software name and version.
So with this commit, we are simply using `gnuastro' for Gnuastro, not
`astnoisechisel'.
|
|
This work is now merged, I just added the new argument to the `pybuild'
function.
|
|
Until now, management of the software names and versions in the paper was
done manually (a macro had to be defined in `initialize.mk', then used in
`paper.tex', so they had to be manually set in two places). Managing this
was not easy.
To fix this, with this commit, each software building rule's target is a
text file that contains its human-readable name and its version. In the
end, the configure script sorts them by their name and writes them into a
LaTeX input file that we can easily import as a file into the main paper.
|
|
After trying to set the pipeline from scratch with no internet conection
(but all tarballs already downladed), `h5py' Python package complained
about not having access to download `pkgconfig'. After solving this
dependency, it also complained about not having `cython'.
With this commit, we add `pkgconfig' (Python) and `cython' to the
pipeline in order to be able to install `h5py' properly.
|
|
Until now, these versions were written in each run. This was mainly
inherited from the old days of the pipeline, where we didn't know the
software on the host. But now that we have almost everything under control,
we can just write these LaTeX macros at the end of the configure script and
make `initialize.mk' simpler and also (very slightly!) speed-up/simplify
the processing.
|
|
Until now, the steps to manage the command-line options of the configure
script were limited (couldn't accept an equal sign or space between the
option name and value). With this commit, it can now also accept optional
equal signs between the option name and value. Thus not causing many
confusions.
Also, it is more logically consistent for the link to the build-directory
to be placed in the top directory (as a hidden file like `.local' until
now), and not as a visible directory like `reproduce/build' (which we used
until now). Therefore, with this commit, the link to easily access the
build-directory is `.build' in the top source directory.
Finally, because `minmapsize' is too specific to Gnuastro and has now been
given its default value at the start of the configure script, the
description for `minmapsize' has been removed (to not confuse users who
don't use Gnuastro). If anyone is familiar enough with Gnuastro to change
it, they already know it from its book.
|
|
In the previous commit, a copyright notice was added after a systematic
search of the version controlled files. However, we missed `.gitignore'
(because we were discarding those with the `*.git*' pattern to avoid files
in the `.git' directory). This has been fixed by using this command (in the
top project directory) instead:
for f in $(find ./ -type f); do \
if [[ $f != ./.git/* ]]; then \
n=$(grep -i copyright $f | wc -l); \
echo "$n $f"; \
fi; \
done | awk '$1==0'
|
|
After doing a systematic search for files without a copyright notice, a few
more were found that didn't have a notice. So a notice was added for them.
I used this Bash command to find the files:
for f in $(find ./ -type f); do \
if [[ $f != *.git* ]]; then \
n=$(grep -i copyright $f | wc -l); \
echo "$n $f"; \
fi; \
done | awk '$1==0'
|
|
To help make it easier to re-use (like the rest of the "large" files).
|
|
In order to be more clear, a copyright statement was added to all the LaTeX
and README files.
|
|
With the options, it is now possible to run the configure script more
easily after the initial run. The `--help' option provides a nice and
complete introduction along with a listing of the input options and the
`-j' option can be use to manually set the number of threads.
|
|
Until now, we were using `flock' (file-lock) for downloading the input
datasets in series. But we couldn't do this when downloading the software
tarballs because `flock' wasn't yet available. Generally, unlike
processing, downloading is much better done in series than in parallel.
To enable serial downloads of the software also, with this commit we are
installing `flock' in the configure script (not in a Makefile). As a
result, besides `flock', we can also benefit from the other good features
of the `reproduce/src/bash/download-multi-try' script *(for example
attempting download again after some time).
Some GNU mirrors may have problems at the time of download, so with this
commit, we are using the main GNU FTP server for GNU programs.
|
|
The LaTeX macro for libgit2 was not properly used in `paper.tex'.
On Mac systems, after browsing the directory, a `.DS_Store' file was
created. So to keep things clean on those systems, it is added to the files
to be ignored by Git.
|
|
Until recently, there was no problem with the `makelink' script of
`dependencies-basic.mk' because it was called on separate recipe lines (and
thus separate shells). But recently we added a call to it within a single
shell (for GCC on Mac OS systems). So a previous call to it would effect
the next call. To fix this, in this commit, we are re-setting PATH to its
original value after each call finishes.
|
|
Bzip2 has a special/separate Makefile to build shared libraries which
didn't work on a macOS. So with this commit, we are allowing Bzip2 shared
libraries only on macOS systems.
Also, I noticed that macOS's `sed' doesn't have the `-i' option (to do the
change in place within the same file). So we are using `-e' to write the
changed Makefile in a temporary directory, then rename that.
|
|
Until now, we were actually running all the programs to check their
versions during initialization. But now that the number of programs has
increased, this can be slow. With this commit, we simply report the version
as a constant string. Maybe later, we can follow the strategy of the TeX
Live packages and write them all at configure time.
|
